I can't start an audio or video in ichat 6 on Lion

I chat used to work for me.  Now I can't start up audio or video chats.
The error message I get is
"iChat can’t start the audio chat."
"Your computer is busy in another chat."
I have tried the following
restart ichat
reinstall ichat
remove ~/Library/Preferences/com.apple.iChat*
I am using gtalk as my account.
Any help would be awesome
Nathan

Hi,
In Snow Leopard iChat and Face Time could be open at the same time and in fact use the camera (and or mic) at the same time.
I am not sure this is possible in Lion so I would launch Face Time and check that it is Off in the Preferences.
Although deleting all the com.apple.ichat  .plists is excessive it should have closed any Open Chat (or what it thought was open) when you restarted.  (Although you don't say you have restarted iChat since deleting them)
However there is one setting that may have upset this.
In System Preference > General Pane (Used to be the Appearance pane) is a check box to Cause any Open window on Quit to be reopened on any app launch.
If any window is Minimised to the DOCK that is where it is put back.  (If it is trying to reconnect an audio or Video Chat this may be an Invite window)
As iChat can do Video and Audio Chats Peer-to-Peer it is pointless deleting com.apple.ichat.AIM.plist or the Jabber one or in fact the Yahoo one as once a chat is started you can log out of the relevant Buddy List (Make that Account Off Line).
It is possible that this a a new style Message in Lion to Say "Your Camera/Mic is in use in another application"
As Reinstalling (Hopefully iChat 6) and deleting all the .plist  and then restarting should have given you a clean slate, as it were, it is difficult to see what the issue could be or what to suggest next.
10:41 PM      Thursday; August 11, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Similar Messages

  • ThinkPad E545 - After Win 8.1 update: Can't start Dolby Audio ...

    I have just updated my ThinkPad E545 to Windows 8.1 today.  Every time after computer boots up, I get an Error message starting like "Dolby Advanced Audio - Can't start Dolby Audio. If this problem will stay restart the computer. I have Czech Wins that's why it should be little bit different. After restart the computer the note is there again. I found discussion where are helps like Uninstall Conexant, restart and then Install again. But the problem is still there. Maybe I do some mistake. Can anyone help me?

    hi Sperl19,
    Welcome to Lenovo Community Forums!
    Your Dolby may not be synced with the Audio driver after the update,
       Since Audio driver may had been updated by the 8.1 but not the Dolby app.
    Here's what to do:
    Open Device Manager 
        Uninstall the Audio Device Under Audio inputs and outputs
                Then proceed to Control Panel / Programs / Uninstall a Program
                         Uninstall all Dolby Related programs
                                 Restart if Prompted
    Now install this software driver
     Conexant Audio Driver
    Now open Drive C: on the upper right hand side of the screen you will find a Search pane
         Type in "aa" and hit search
    You should find 1 of the result as dolby or if not post a screen shot of the results here
    If ever you found it install that and it should bring your dolby back
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Can anyone help me with my video on ichat

    can anyone help me test my video on ichat, i've only had my macbook a few months, i can text with it but never use my video yet
    many thanks if you can. Aaron
    mac book   Mac OS X (10.4.8)   intel core duo

    I have the same problem...need help. I can type but the video gets a communication error #8

  • How can I combine the audio and video files from youtube downloads when they don't automatically combine?

    I'm using YouTube Video and Audio Downloader. Sometimes the audio and video files combine automatically, sometimes they don't - remaining as separate " DASH - .m4a and DASH - .mp4 ". It used to be that when this would happen I could open up a "ffmpeg" window which would allow me to "manually" convert them to a combined .mp4 file. It was a "drag and drop" type of interface. For some reason I can no longer access that ffmpeg combining function. I tried clicking on ffmpeg.exe. I tried re-downloading ffmpeg several times, both from the Downloader options tab and from the ffmpeg website.
    Thanks for your help.

    Sounds like a question for the developer of the video download add-ons that you have installed.

  • Error -8 message (can't connect with audio or video, text OK)

    I've tried to exhaust all the resources online, but so far have had little success.
    I'm getting an Error -8 message whenever I try to establish a video (or audio) chat with any of the three Apple test accounts. I've opened the ports recommended by:
    http://portforward.com/english/routers/port_forwarding/Netopia/3347NWG/iChat.htm
    I'm actually trying to get my father-in-law's account up and running so the only details I have about the ISP is that it's Bluewin based in Switzerland so I'm not sure about VoIP details. I could probably find out if necessary. Also, I've already switched to port 443 to log on.
    Here's sort of a funny little detail. I've also brought my 12-inch PowerBook G4 with me which I know works back in the states. I get almost the same error as the iMac, but with more details. The only difference is that the iMac doesn't have any details in the following categories:
    Video Conference Report:
    Video Conference Support Report:
    Video Conference User Report:
    I think I've covered all the bases. Any and all help would be greatly appreciated. The details of the error log are listed below (BTW, changed account info to "********" for security).
    Thanks, in advance,
    Scott
    //ERR0R REPORT DETAILS///////////////////////
    Date/Time: 2007-12-29 11:03:20.315 -0500
    OS Version: 10.4.11 (Build 8S165)
    Report Version: 4
    iChat Connection Log:
    AVChat started with ID 3832688733.
    scbressler723: State change from AVChatNoState to AVChatStateWaiting.
    0x5236550: State change from AVChatNoState to AVChatStateInvited.
    0x5236550: State change from AVChatStateInvited to AVChatStateConnecting.
    scbressler723: State change from AVChatStateWaiting to AVChatStateConnecting.
    scbressler723: State change from AVChatStateConnecting to AVChatStateEnded.
    Chat ended with error -8
    0x5236550: State change from AVChatStateConnecting to AVChatStateEnded.
    Chat ended with error -8
    Video Conference Error Report:
    2.003976 @:0 type=4 (00000000/36)
    [VCSIP_INVITEERROR]
    [19]
    2.003878 @SIP/SIP.c:2447 type=4 (900A0015/36)
    [SIPConnectIPPort failed]
    Video Conference Support Report:
    1.503507 @SIP/Transport.c:1218 type=1 (00000000/0)
    [INVITE sip:[email protected]:16402 SIP/2.0
    Via: SIP/2.0/UDP m.0:5061;branch=z9hG4bK7b92ac6340899c77
    Max-Forwards: 70
    To: "u0" <sip:[email protected]:16402>
    From: "********3" <sip:[email protected]>;tag=345579911
    Call-ID: 88add57e-b627-11dc-8150-f5008efb13c4@lip
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:5061>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 538
    v=0
    o=Scott 0 0 IN IP4 m.0
    s=scbressler723
    c=IN IP4 m.0
    b=AS:2147483647
    t=0 0
    a=hwi:70:1:1499
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 16386 RTP/AVP 12 3 0
    a=rtcp:16387
    a=rtpmap:3 GSM/8000/1
    a=rtpmap:0 PCMU/8000/1
    a=rtpID:-778271315
    m=video 16384 RTP/AVP 126 34
    a=rtcp:16385
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16387 VIDEO 16385
    a=pogo
    a=fmtp:126 imagesize 0 rules 30:160:120:160:120
    a=rtpID:1838791129
    0.503244 @SIP/Transport.c:1218 type=1 (00000000/0)
    [INVITE sip:[email protected]:16402 SIP/2.0
    Via: SIP/2.0/UDP m.0:5061;branch=z9hG4bK7b92ac6340899c77
    Max-Forwards: 70
    To: "u0" <sip:[email protected]:16402>
    From: "********3" <sip:[email protected]>;tag=345579911
    Call-ID: 88add57e-b627-11dc-8150-f5008efb13c4@lip
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:5061>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 538
    v=0
    o=Scott 0 0 IN IP4 m.0
    s=********3
    c=IN IP4 m.0
    b=AS:2147483647
    t=0 0
    a=hwi:70:1:1499
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 16386 RTP/AVP 12 3 0
    a=rtcp:16387
    a=rtpmap:3 GSM/8000/1
    a=rtpmap:0 PCMU/8000/1
    a=rtpID:-778271315
    m=video 16384 RTP/AVP 126 34
    a=rtcp:16385
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16387 VIDEO 16385
    a=pogo
    a=fmtp:126 imagesize 0 rules 30:160:120:160:120
    a=rtpID:1838791129
    0.002969 @SIP/Transport.c:1218 type=1 (00000000/0)
    [INVITE sip:[email protected]:16402 SIP/2.0
    Via: SIP/2.0/UDP m.0:5061;branch=z9hG4bK7b92ac6340899c77
    Max-Forwards: 70
    To: "u0" <sip:[email protected]:16402>
    From: "********3" <sip:[email protected]>;tag=345579911
    Call-ID: 88add57e-b627-11dc-8150-f5008efb13c4@lip
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:5061>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 538
    v=0
    o=Scott 0 0 IN IP4 m.0
    s=********3
    c=IN IP4 m.0
    b=AS:2147483647
    t=0 0
    a=hwi:70:1:1499
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 16386 RTP/AVP 12 3 0
    a=rtcp:16387
    a=rtpmap:3 GSM/8000/1
    a=rtpmap:0 PCMU/8000/1
    a=rtpID:-778271315
    m=video 16384 RTP/AVP 126 34
    a=rtcp:16385
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16387 VIDEO 16385
    a=pogo
    a=fmtp:126 imagesize 0 rules 30:160:120:160:120
    a=rtpID:1838791129
    0.000000 @:0 type=2 (00000000/36)
    [VCVIDEO_OUTGOINGATTEMPT]
    [4]
    Video Conference User Report:

    Hi Ralph,
    Well, the Leopard update is installed (10.5.1) and still no luck with iChat 4.0. Still using UPnP through the Netopia 3347NWG, not port forwarding. I have to admit I'm still a little clumsy finding my way through the new OS, but I've done the adjustments to the Mac firewall and I'm sure I have a little more "homework" to do. Unfornately, I'm leaving for home tomorrow, so I thought I'd a least give you an update.
    The new error message is as follows. Any additional troubleshooting will have to be done over the phone with my father-in-law at this point.
    Happy New Year, BTW.
    Patiently awaiting your thoughts.
    Scott
    ///ERROR LOG////////
    Date/Time: 2008-01-03 22:24:50.968 +0100
    OS Version: 10.5.1 (Build 9B18)
    Report Version: 4
    iChat Connection Log:
    2008-01-03 22:24:15 +0100: AVChat started with ID 1452569723.
    2008-01-03 22:24:15 +0100: xxxxxxx11: State change from AVChatNoState to AVChatStateWaiting.
    2008-01-03 22:24:15 +0100: 0x17b761f0: State change from AVChatNoState to AVChatStateInvited.
    2008-01-03 22:24:23 +0100: 0x17b761f0: State change from AVChatStateInvited to AVChatStateConnecting.
    2008-01-03 22:24:23 +0100: xxxxxxx11: State change from AVChatStateWaiting to AVChatStateConnecting.
    2008-01-03 22:24:30 +0100: 0x17b761f0: State change from AVChatStateConnecting to AVChatStateEnded.
    2008-01-03 22:24:30 +0100: 0x17b761f0: Error -7 (0x17b761f0 cancelled the connection.)
    2008-01-03 22:24:30 +0100: xxxxxxx11: State change from AVChatStateConnecting to AVChatStateEnded.
    2008-01-03 22:24:30 +0100: xxxxxxx11: Error -7 (0x17b761f0 cancelled the connection.)
    Video Conference Error Report:
    14.843838 @SIP/SIP.c:2719 type=4 (900A0015/0)
    [SIPConnectIPPort failed]
    Video Conference Support Report:
    12.843724 @SIP/Transport.c:2353 type=1 (00000000/0)
    [INVITE sip:user@rip:5061 SIP/2.0
    Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK17d757ea4955bfc6
    Max-Forwards: 70
    To: "u0" <sip:user@rip:5061>
    From: "0" <sip:user@lip:16402>;tag=458859319
    Call-ID: 43d4b782-ba42-11dc-b17a-ca8b75d14012@lip
    CSeq: 1 INVITE
    Contact: <sip:user@lip:16402>;isfocus
    User-Agent: Viceroy 1.3
    Content-Type: application/sdp
    Content-Length: 729
    v=0
    o=xxxxxxx 0 0 IN IP4 lip
    s=0
    c=IN IP4 lip
    b=AS:2147483647
    t=0 0
    a=hwi:1056:2:2400
    a=iChatEncryption:NO
    a=bandwidthDetection:YES
    m=audio 16402 RTP/AVP 110 121 12 3 0
    a=rtcp:16402
    a=rtpmap:121 speex/16000
    a=rtpmap:122 speex/8000
    a=rtpmap:113 X-AAC_LD/44100
    a=rtpmap:110 X-AAC_LD/22050
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:531389619
    m=video 16402 RTP/AVP 123 126 34
    a=rtcp:16402
    a=rtpmap:123 H264/90000
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16402 VIDEO 16402
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
    a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
    a=rtpID:254359157
    13.344072 @SIP/Transport.c:2353 type=1 (00000000/0)
    [INVITE sip:user@rip:5061 SIP/2.0
    Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK17d757ea4955bfc6
    Max-Forwards: 70
    To: "u0" <sip:user@rip:5061>
    From: "0" <sip:user@lip:16402>;tag=458859319
    Call-ID: 43d4b782-ba42-11dc-b17a-ca8b75d14012@lip
    CSeq: 1 INVITE
    Contact: <sip:user@lip:16402>;isfocus
    User-Agent: Viceroy 1.3
    Content-Type: application/sdp
    Content-Length: 729
    v=0
    o=xxxxxxx 0 0 IN IP4 lip
    s=0
    c=IN IP4 lip
    b=AS:2147483647
    t=0 0
    a=hwi:1056:2:2400
    a=iChatEncryption:NO
    a=bandwidthDetection:YES
    m=audio 16402 RTP/AVP 110 121 12 3 0
    a=rtcp:16402
    a=rtpmap:121 speex/16000
    a=rtpmap:122 speex/8000
    a=rtpmap:113 X-AAC_LD/44100
    a=rtpmap:110 X-AAC_LD/22050
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:531389619
    m=video 16402 RTP/AVP 123 126 34
    a=rtcp:16402
    a=rtpmap:123 H264/90000
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16402 VIDEO 16402
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
    a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
    a=rtpID:254359157
    14.344611 @SIP/Transport.c:2353 type=1 (00000000/0)
    [INVITE sip:user@rip:5061 SIP/2.0
    Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK17d757ea4955bfc6
    Max-Forwards: 70
    To: "u0" <sip:user@rip:5061>
    From: "0" <sip:user@lip:16402>;tag=458859319
    Call-ID: 43d4b782-ba42-11dc-b17a-ca8b75d14012@lip
    CSeq: 1 INVITE
    Contact: <sip:user@lip:16402>;isfocus
    User-Agent: Viceroy 1.3
    Content-Type: application/sdp
    Content-Length: 729
    v=0
    o=xxxxxxx 0 0 IN IP4 lip
    s=0
    c=IN IP4 lip
    b=AS:2147483647
    t=0 0
    a=hwi:1056:2:2400
    a=iChatEncryption:NO
    a=bandwidthDetection:YES
    m=audio 16402 RTP/AVP 110 121 12 3 0
    a=rtcp:16402
    a=rtpmap:121 speex/16000
    a=rtpmap:122 speex/8000
    a=rtpmap:113 X-AAC_LD/44100
    a=rtpmap:110 X-AAC_LD/22050
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:531389619
    m=video 16402 RTP/AVP 123 126 34
    a=rtcp:16402
    a=rtpmap:123 H264/90000
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16402 VIDEO 16402
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
    a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
    a=rtpID:254359157
    Video Conference User Report:
    0.000000 @:0 type=5 (00000000/16402)
    [Local SIP port]
    6.186925 @Video Conference/VideoConferenceMultiController.m:1476 type=5 (00000000/0)
    [IP And Port Data With Caller IP And Port Data: Obtained 80 bytes of local IP and port data (2 entries). Remote data was 0 bytes (0 entries).
    7.804314 @Video Conference/VideoConferenceMultiController.m:1509 type=5 (00000000/0)
    [Initiate Conference To User Cert Version: u0 with 120 bytes of connection data.
    []

  • Why can I not burn audio and videos together as audio cd anymore? her

    My Mac Book Pro used to ask me if I wanted to mix (burn)audio and videos together from a created ITunes playlist.... now it dosent and when I burn the Playlist it dose not burn the videos audio as before.

    Audiobooks from Apple are a once-only download.

  • Can't start any program after upgrading to Mavericks from Mountain Lion.

    After upgrading my Macbook Pro from Mountain Lion to Mavericks, I can't start any program from the dock or finder.  The screen flashes briefly gray, then returns to the desktop.  I repairded permissions from the recovery partition.

    No need to repair permissions from the recovery partition. You can do that using the Disk Utility app located in HD > Applications > Utilities.
    As for the issues with your Mac. Check to see if the startup disk needs reparing. (not the same as permissions)
    The startup disk may need repairing ...
    Launch Disk Utility located in HD > Applications > Utillities
    Select the startup disk on the left then select the First Aid tab.
    Click:  Verify Disk  (not Verify Disk Permissions)
    If DU reports errors, restart your Mac while holding down the Command + R keys. From there you should be able to acces the built in utilities in  OS X Recovery
    Make sure to back up all important files first before using OS X Recovery.

  • [Solved] Can't Start Pulse Audio and No Sound/Volume Controls

    Ok, I booted my PC this morning to find I have no sound controls in Gnome Shell after an update yesterday or sound, I have to use alsamixer to unmute, so I am getting sound but no way to control it.  I tried killing pulseaudio and restarting but I keep getting the same error:
    pulseaudio -k:
    E: [pulseaudio] main.c: Failed to kill daemon: No such process
    pulseaudio --start:
    E: [pulseaudio] main.c: Daemon startup failed.
    start-pulseaudio-x11:
    Connection failure: Connection refused
    pa_context_connect() failed: Connection refused
    This is the output of pulseaudio -v:
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 6.0
    I: [pulseaudio] main.c: Page size is 4096 bytes
    I: [pulseaudio] main.c: Machine ID is 74ef4413bd254c10a2eee6b69deab3c7.
    I: [pulseaudio] main.c: Session ID is c2.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
    I: [pulseaudio] main.c: Using state directory /home/dobbie/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-6.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
    I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-device-volumes'.
    I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-stream-volumes'.
    I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-card-database'.
    I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HD-Audio Generic/HD-Audio Generic.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HD-Audio Generic
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import HD-Audio Generic use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card HD-Audio Generic
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hdmi:1: Invalid argument
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hdmi:1: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,1: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,2: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,3: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,4: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,5: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
    I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:1.
    I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
    I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
    I: [pulseaudio] sink.c: device.api = "alsa"
    I: [pulseaudio] sink.c: device.class = "sound"
    I: [pulseaudio] sink.c: alsa.class = "generic"
    I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.subdevice = "0"
    I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] sink.c: alsa.device = "3"
    I: [pulseaudio] sink.c: alsa.card = "1"
    I: [pulseaudio] sink.c: alsa.card_name = "HD-Audio Generic"
    I: [pulseaudio] sink.c: alsa.long_card_name = "HD-Audio Generic at 0xfbf9c000 irq 28"
    I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
    I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
    I: [pulseaudio] sink.c: device.bus = "pci"
    I: [pulseaudio] sink.c: device.vendor.id = "1002"
    I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    I: [pulseaudio] sink.c: device.product.id = "aac0"
    I: [pulseaudio] sink.c: device.string = "hdmi:1"
    I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
    I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
    I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
    I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
    I: [pulseaudio] sink.c: device.description = "HD-Audio Generic Digital Stereo (HDMI)"
    I: [pulseaudio] sink.c: alsa.mixer_name = "ATI R6xx HDMI"
    I: [pulseaudio] sink.c: alsa.components = "HDA:1002aa01,00aa0100,00100500"
    I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of HD-Audio Generic Digital Stereo (HDMI)"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: alsa.card = "1"
    I: [pulseaudio] source.c: alsa.card_name = "HD-Audio Generic"
    I: [pulseaudio] source.c: alsa.long_card_name = "HD-Audio Generic at 0xfbf9c000 irq 28"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "1002"
    I: [pulseaudio] source.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    I: [pulseaudio] source.c: device.product.id = "aac0"
    I: [pulseaudio] source.c: device.string = "1"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
    I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
    I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
    I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
    I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1 (alsa_card.pci-0000_01_00.1) module loaded.
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/USB Camera-B4.09.24.1/USB Camera-B4.09.24.1.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card USB Camera-B4.09.24.1
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import USB Camera-B4.09.24.1 use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card USB Camera-B4.09.24.1
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:front:2: Invalid argument
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,1: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,3: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,4: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,5: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,6: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,7: No such file or directory
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 16000 Hz.
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
    I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.
    I: [pulseaudio] card.c: Created 1 "alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 16000 Hz.
    I: [pulseaudio] alsa-source.c: Successfully opened device hw:2.
    I: [pulseaudio] alsa-source.c: Selected mapping 'Multichannel' (multichannel).
    I: [pulseaudio] alsa-source.c: Cannot enable timer-based scheduling, falling back to sound IRQ scheduling.
    I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
    W: [pulseaudio] alsa-util.c: Unable to load mixer: Invalid argument
    I: [pulseaudio] alsa-source.c: Failed to find a working mixer device.
    I: [pulseaudio] source.c: Created source 1 "alsa_input.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.multichannel" with sample spec s16le 4ch 16000Hz and channel map front-left,front-right,rear-left,rear-right
    I: [pulseaudio] source.c: alsa.resolution_bits = "16"
    I: [pulseaudio] source.c: device.api = "alsa"
    I: [pulseaudio] source.c: device.class = "sound"
    I: [pulseaudio] source.c: alsa.class = "generic"
    I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] source.c: alsa.name = "USB Audio"
    I: [pulseaudio] source.c: alsa.id = "USB Audio"
    I: [pulseaudio] source.c: alsa.subdevice = "0"
    I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] source.c: alsa.device = "0"
    I: [pulseaudio] source.c: alsa.card = "2"
    I: [pulseaudio] source.c: alsa.card_name = "USB Camera-B4.09.24.1"
    I: [pulseaudio] source.c: alsa.long_card_name = "OmniVision Technologies, Inc. USB Camera-B4.09.24.1 at usb-0000:00:1d.0-1.2, hi"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_usb_audio"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1d.0-usb-0:1.2:1.1"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/sound/card2"
    I: [pulseaudio] source.c: udev.id = "usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
    I: [pulseaudio] source.c: device.bus = "usb"
    I: [pulseaudio] source.c: device.vendor.id = "1415"
    I: [pulseaudio] source.c: device.vendor.name = "Nam Tai E&E Products Ltd. or OmniVision Technologies, Inc."
    I: [pulseaudio] source.c: device.product.id = "2000"
    I: [pulseaudio] source.c: device.product.name = "Sony Playstation Eye"
    I: [pulseaudio] source.c: device.serial = "OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1"
    I: [pulseaudio] source.c: device.string = "hw:2"
    I: [pulseaudio] source.c: device.buffering.buffer_size = "12792"
    I: [pulseaudio] source.c: device.buffering.fragment_size = "3192"
    I: [pulseaudio] source.c: device.access_mode = "mmap"
    I: [pulseaudio] source.c: device.profile.name = "multichannel"
    I: [pulseaudio] source.c: device.profile.description = "Multichannel"
    I: [pulseaudio] source.c: device.description = "Sony Playstation Eye Multichannel"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-usb"
    I: [pulseaudio] alsa-source.c: Using 4.0 fragments of size 3192 bytes (24.94ms), buffer size is 12792 bytes (99.94ms)
    I: [alsa-source-USB Audio] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-source-USB Audio] alsa-source.c: Starting capture.
    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #7; argument: "device_id="2" name="usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241" card_name="alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/sound/card2 (alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241) module loaded.
    I: [pulseaudio] module-udev-detect.c: Found 3 cards.
    I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
    I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #8; argument: "").
    I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #9; argument: "").
    I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #10; argument: "").
    I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #11; argument: "").
    I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #12; argument: "").
    I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #13; argument: "").
    I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #14; argument: "").
    I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #15; argument: "").
    I: [pulseaudio] client.c: Created 0 "Login Session c2"
    I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #16; argument: "").
    I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #17; argument: "").
    I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #18; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #19; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #20; argument: "").
    E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-equalizer-sink.so: module-equalizer-sink.so: cannot open shared object file: No such file or directory
    E: [pulseaudio] module.c: Failed to open module "module-equalizer-sink".
    E: [pulseaudio] main.c: Module load failed.
    E: [pulseaudio] main.c: Failed to initialize daemon.
    I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #20).
    I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #20).
    I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #19).
    I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #19).
    I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #18).
    I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #18).
    I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #17).
    I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #17).
    I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #16).
    I: [pulseaudio] client.c: Freed 0 "Login Session c2"
    I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #16).
    I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #15).
    I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #15).
    I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #14).
    I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #14).
    I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #13).
    I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #13).
    I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #12).
    I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #12).
    I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #11).
    I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #11).
    I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #10).
    I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #10).
    I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #9).
    I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #9).
    I: [pulseaudio] module.c: Unloading "module-esound-protocol-unix" (index: #8).
    I: [pulseaudio] module.c: Unloaded "module-esound-protocol-unix" (index: #8).
    I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #7).
    I: [pulseaudio] source.c: Freeing source 1 "alsa_input.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.multichannel"
    I: [pulseaudio] card.c: Freed 1 "alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
    I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #7).
    I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
    I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo"
    I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor"
    I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_01_00.1"
    I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
    I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
    I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
    I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
    I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
    I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
    I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
    I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
    I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
    I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
    I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
    I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
    I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
    I: [pulseaudio] main.c: Daemon terminated.
    When I start pavucontrol I get this:
    Can someone help me correct what the issue is, please let me know if you need more information.
    Thanks in advance.
    Last edited by Dobbie03 (2015-05-15 20:35:02)

    I tried "pulseaudio" in the terminal and get the following:
    W: [pulseaudio] alsa-util.c: Unable to load mixer: Invalid argument
    E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-equalizer-sink.so: module-equalizer-sink.so: cannot open shared object file: No such file or directory
    E: [pulseaudio] module.c: Failed to open module "module-equalizer-sink".
    E: [pulseaudio] main.c: Module load failed.
    E: [pulseaudio] main.c: Failed to initialize daemon.

  • Can't burn imovie with idvd & can't keep the audio and video clips to ancho

    Two questions:
    I've been working on a series of short digital stories in iMovie and have been trying to put them on a dvd. Using iDVD wasn't successful. Couldn't get them loaded into the map on the DVD theme page. So I dragged finally gave up and dragged the iMovie filesinto the DVD icon on my desktop and burned them. But now I have to drag the iMovie file from the DVD onto the harddrive before I play them.
    I would like to have all of the short movies in one DVD.
    I would also like to have one longer iMovie file but I'm having a devil of a time making all of the files, audio, video, photo, etc. stay in place while I'm working on each section. Perhaps this isn't feasible?
    With thanks for any help you can give me. I'm a novice at this program but enjoying the challenge.
    I'm using a borrowed machine...2 GHz G5 with 2 GB DDR SDDRAM
    Powerbook G4   Mac OS X (10.4)  

    I've been working on a series of short digital stories in iMovie and have been trying to put them on a dvd. Using iDVD wasn't successful. Couldn't get them loaded into the map on the DVD theme page. So I dragged finally gave up and dragged the iMovie filesinto the DVD icon on my desktop and burned them. But now I have to drag the iMovie file from the DVD onto the harddrive before I play them.
    Were you dragging the project file into the right place? Try a simple theme like the Portfolio Colour theme under the iDVD3 collection. By the way, the simple thing first, I hope you were using iDVD5 not iDVD4.
    There can also be problems if the iMovie projects were created in iMovie4 and converted to iMovieHD. If this is the case load each one again. Make some simple change, undo if you wish, then save again.
    In any case try using file > Import and note what happens. I think this (old fashioned) way is easier than gragging in the projects. You can tidy them up later.

  • Can't play live audio (or video) mobile using 4.5.1

    I'm trying to play a live audio stream in a mobile project and cannot get it to work.
    Can someone point me to the best way to play live audio from an rtmp stream in Flash Builder 4.5.1?  I've tried VideoPlayer, VideoDisplay, Sound object, used a netStream and can't get anything to work.  I've tested the stream with a Flex 3 project and can hear the audio there fine.  I'd like to do video later, but I need the audio to work first.
    Here's just some pieces of what I've tried:
         ins = new NetStream(inc);
         var nspo:NetStreamPlayOptions = new NetStreamPlayOptions();
         nspo.streamName = rtmpSession;
         ins.play2(nspo);
         videoInstructor.source =rtmpPath + "/" + rtmpSession;
         videoInstructor.play();
         videoInstructorHost.host = rtmpPath;
         videoInstructorStreamName.streamName = rtmpSession;
    <s:VideoDisplay id="videoInstructor" left="10" right="10" bottom="10" height="331" source="" autoPlay="true"/>
    <s:DynamicStreamingVideoSource id="videoInstructorHost" host="" streamType="live">
      <s:DynamicStreamingVideoItem id="videoInstructorStreamName" streamName="" />
    </s:DynamicStreamingVideoSource>
    <s:VideoDisplay id="videoInstructor" left="10" right="10" bottom="10" height="331" source="{videoInstructorHost}" autoPlay="true"/>
    Any information would be very much appreciated.

    Moving files from an existing install can indeed cause problems, as the error message you got indicated. Existing files and registry entries will point to a particular location, that will not have changed as you moved the files. It sounds like you may have to do a CleanSweap (removal of drivers and software) and reinstall. Let us know how you get on.
    You can find some details on uninstalling/reinstalling on our Kbase:
    http://ask.americas.creative.com
    SID72
    CatMessage Edited by Catherina-CL on 0--2004 :52 PM

  • Can't start multiway audio

    I'm trying to start a 3-way audio chat, we are all running 10.4.3. We can all connect to each other fine doing 1-1 chats. I'm initiating, and I have a 300+ KB/s. The absoluet slowest connection in our trio is a 97 KB/s upload speed.
    If I try to invite both people at the same time, then one person can connect but one person can't. It gives me the "xxxxx did not respond" message. If I try to invite one person, and then the other person, sometimes I get the same problem. Other times the little "+" button is grayed out, so I can't even try to add that person to the chat.
    Any ideas what is going on? We all have 1.2 GHz+ G4's with 90+ KB/s connection speed, so we meet the requirements. And we can all connect to each other fine using 1-1 chats.
    Thanks for any help.

    Hi bobmcfred,
    The iChat min speed for 1-1 chats is 100kbps. (This tends to be a average figure in Real world practice).
    The min for 4 way (multichats) is 384kbs. (See second table in the link above)
    The slow uplink speed is just not fast enough.
    Which one gets accepted will depend on who answers first.
    Ralph

  • Can't use multiuser audio and video chat

    Hi:
    I need help urgently!
    My boss tell us to set up an 3-way video chat platform . as the requirment says,we use a PowerMac Dual 1.8 GHz G5 to be the host. and the other two computers are ibook G4 1.2GHz. but we just can video chat on and one,can't do it as 3-way. the strange thing is we can only audio chat with one person too.
    please help me. thanks

    HI,
    If this was helpful ...
    New Discussions ReponsesThe new system for discussions asks that after you mark your question as Solved, you take the time to mark any posts that have aided you with the Helpful tag and the post that provided your answer with the solved tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
    Alternatively, you can change the status to Answered.
    If we use the forums properly they will work well...

  • Can I "re-synch" audio to video using iMovie?

    I purchased a Pinnacle Video Transfer gadget to convert VHS tapes to DVD. I just converted a 4 cassette series using what I consider the exact same procedures for each cassette and 2 converted almost perfect, but for the other 2, the audio is completely out of synch with the video. Can I use iMovie to fix the files? Somehow I think it should be a simple procedure, but I can't figure it out.
    tia

    make your 'video' (still, title, whatever) as long as your audio track

  • Can Flash play multiple audio and video files at the same time?

    Hello,
    I would like to create a web-based client/application that
    can play multiple a/v files or stream multiple a/v files at same
    time. Is this possible with Flash, without the use of RTMP? If yes,
    can you please provide an example. Thanks in advance.
    Regards,
    Nilang

    You never edit within a clip. The purpose of opening a clip is to make sync adjustments, audio equalization, color correction, stabilization, things that you might want do overall to the master clip before you edit it. You edit the portion of the clip you want from the browser into a project. There is really very seldom any need to open a clip into the timeline.

  • G780 - Windows 8.1 update - Can't Start Dolby Audio Driver

    I just updated my G780 to Windows 8.1 this morning.  every time I boot up the computer, I get an Error message stating" Dolby Advanced Audio - Unable to start the Dolby Audio driver.  Please restart the computer or reinstall the driver if the problem persists.  I have restrtaed the computer and I do not know where the driver is for this or where to install it. Please help.  Computer is just over a month old.

    hi
     The Driver I gave you is very huge (185MB)
          This is because it contains the dolby installer,
             It depends on the Version where it will be located after installing the audio driver
     and what name it will have,
    Try Searching then for Dolby but make sure you open you drive C: and do the search
    or otherwise
          Try Navigating these folders
                     Open My Computer or ThisPC open you Drive C:
    Now we'll look for the dolby Advanced audio installer
          Look for these folders as these are through my experience where it goes
                      Also when you find the right folder you will find two of them together (Dolby Advanced Audio and Dolby Home Theater) just install what came with your system the dolby advanced audio.
                 C: Drivers / Conexant (Then look inside on all the folders inside it lkook for anything says like dolby)
                 C: Conexant (Then look inside on all the folders inside it lkook for anything says like dolby)
                 C: Program files x86 / Conexant (Then look inside on all the folders inside it lkook for anything says like dolby)
                 C: Program files x86 / Conexant (Then look inside on all the folders inside it lkook for anything says like dolby)
    Trust me its in your PC now you just need to look for the installer
    Reference:
    Forum link
    Forum link
    Forum link
    Forum link
    Regards
    Solid Cruver
     

Maybe you are looking for

  • Why Must I put in Credit / Debit Card Info, To Load mp3 songs on my iPhone?

    I am curious as to why I "MUST" put in my Credit Card / Debit Card information if I want to download some basic games, use iTunes on my PC-Computer to copy mp3 files to my 'new-used' iPhone 3G phone, and when I validate more information it comes back

  • Splitting an event takes more than 3 min

    Hi, I have about 8.000 photos in my library and 2.500 photos in a single event. Now I want to extract a set of pictures from this event and move it in a new event. Is there a faster way doing this than splitting the event before and after the set of

  • Report Painter using user exit U002 to create a formel variable for FI-SL

    Hi, I would like to use Report painter creating a formel variable with U002(VAR1,VAR2) for FI-SL and did following: 1. go to TCode: GS11 2. Formel: selecting U002 from Formel-Exit list and giving var1 and var2       '#U002(VAR1, VAR2)' 3. Save 4. Err

  • Unable to open .jar -files on VisipriseMfg.ear

    Hi, Any ideas what setting will be wrong because when I hit for example nc.ejb.jar in VisipriseMfg.ear, an error pop-up (Java Virtual Machine Launcher) exists: 'Failed to load Main-Class manifest attribute from....' Same problem in all .jar -files. A

  • Audigy 2 ZS: Cannot save setti

    Hi, my problem is: after each start of my PC, I have to open - Equalizer - EAX-Console - Speaker-settings (here I have to recalibrate the 5. speakers, so that my rear speakers will work.) I made profiles, they are saved, but they aren't acti've after