I can't start DHCP Service or access Xserve share points from pc's
When I try to start the service I get an error message:
CANNOTSTART_SERVICEERR
I'm not sure what I'm looking for here.
I have SMB services running and I can see and access files on pc's and macs on the network from macs, but I can't access the Xserve shares from pc's.
Do SMB and DHCP services work together in some way?
This weekend we had a power outage and I had to repropogate permissions on all share points so that certain macs could read and write.
The Xserve restarted like it should but is there something I need to set to keep permissions after a power outage?
I have the server set up as a standalone server and it's the only one on the network. And I have permissions set so that everyone has read/write permissions.
I'm using a cable modem to a Linksys router to multiple switches.
Any ideas?
Thanks
When I try to start the service I get an error message:
CANNOTSTART_SERVICEERR
I'm not sure what I'm looking for here.
I have SMB services running and I can see and access files on pc's and macs on the network from macs, but I can't access the Xserve shares from pc's.
Do SMB and DHCP services work together in some way?
This weekend we had a power outage and I had to repropogate permissions on all share points so that certain macs could read and write.
The Xserve restarted like it should but is there something I need to set to keep permissions after a power outage?
I have the server set up as a standalone server and it's the only one on the network. And I have permissions set so that everyone has read/write permissions.
I'm using a cable modem to a Linksys router to multiple switches.
Any ideas?
Thanks
Similar Messages
-
HT6117 Error : Can not start the service "Apple Mobile Device"
I get this error message of Can not start the service "Apple Mobile Device" please verify if you have enough permission to start a service. I have tried reinstalling itunes but could not get rid of the error. I use Win 7 64bit OS. Please help me to resolve the issue
Thanks
VenkySee Troubleshooting issues with iTunes for Windows updates.
tt2 -
While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator and still get the same message. I click "ignore" and finish the installation but when I try to open it I get this "Runtime Error! R6034 An application has made an attempt to load the C runtime library incorrectly." I already uninstalled iTunes and all other applications involved and re-installed itunes from the itunes site and the problem persists. Please help!
Solving MSVCR80 issue and Windows iTunes install issues.
-
The program can't start because BCM-4.0.dll is missing from your computer
Hi
When I am trying to open the dashboard from Citrix server i am getting an error message: "The program can't start because BCM-4.0.dll is missing from your computer.'
BO 4.0
CMS Database : Oracle 11g
Reporting Database : Oracle, Teradata, SQL Server
Tomcat Apps server.
OS: Linux.
Please help to fix this issue.
Thanks
NaveenHas the issue been resolved? Dashboard Design 4.0 has been release (GA
issue continues for us " This application has failed to start because BCM-4-0.dll was not found. Re-installing the application may fix the problem"
Windows 2003 32 bit, Citrix Xen App 4.5, Dash Board Design 4.0 -
How can I make DHCP Service automatically assign IP addresses?
We decided on using OS X Server's DHCP service rather than depend on our router to dole out IPs. Here's the size and shape of our local subnet:
Range: 192.168.0.0 to 192.168.7.255
Mask: 255.255.248.0
Router: 192.168.1.1
DNS: ....etc...
We're trying to have the DHCP block managed as 192.168.2.0 through 192.168.2.255. Maybe I'm missing something, but shouldn't DHCP automatiScally assign IPs in that range every time someone plugs in a computer? Right now we're having to enter MAC + IP static maps manually into Server Admin, which is a major pain. How can we fix that so it becomes automatic?
Here's how DHCP service is set on our quad-Ethernet Xserve Xeon. en0 / en1 / en2 / en3 are all set up the same, but only en0 is checked:
GENERAL:
Subnet Name: Our LAN (en0)
Starting IP Address: 192.168.2.0
Ending IP Address: 192.168.2.255
Subnet Mask: 255.255.248.0
Network Interface: en0
Router: 192.168.1.1
Lease Time: 4 hours
DNS Servers:
192.168.1.100.... etc.
Default Search Domain: ourdomain.private
LDAP:
Server Name: (blank)
Search Base: (blank)
Port: (Leave blank to use the default port)
[ ] LDAP over SSL
URL:
WINS:
WINS/NBNS Primary Server: 10.0.1.20
WINS/NBNS Secondary Server: 10.0.1.21
NBDD Server: 1.0.1.22
NBT Node Type: Not Set
NetBIOS Scope ID: (blank)
I'm stuck.... I thought all I'd have to do is define a suitable range, like the 256 addresses in the middle of our DHCP block, but it's not enough. Your help is certainly appreciated.
- BertThis morning I stumbled onto the solution (at least a partial solution). I noticed in /var/log/system.log that there were warnings to the effect of "Hey -- you've got disabled DHCP ports that have conflicting ranges with your enabled DHCP port." Previously, I hadn't thought this was a major error, but when I deleted the three disabled ports from DHCP (en1, en2, and en3) and restarted DHCP then everything started working correctly. Hosts that were previously not getting IP addresses assigned because they weren't listed in Static Maps are now getting addresses.
The log entries looked basically like this:
Apr 19 09:54:38 myserver servermgrd[50]: servermgr_dhcp:bootp config:Error:Subnets 'My LAN (en2)' and 'My LAN (en0)' have overlapping ranges: '1\
92.168.2.0-192.168.2.255' overlaps '192.168.2.0-192.168.2.255'
Apr 19 09:54:38 myserver servermgrd[50]: servermgr_dhcp:bootp config:Error:Subnets 'My LAN (en2)' and 'My LAN (en3)' have overlapping ranges: '1\
92.168.2.0-192.168.2.255' overlaps '192.168.2.0-192.168.2.255' - 'My LAN (en3)' is not active
Apr 19 09:54:38 myserver servermgrd[50]: servermgr_dhcp:bootp config:Error:Subnets 'My LAN (en2)' and 'My LAN (en1)' have overlapping ranges: '1\
92.168.2.0-192.168.2.255' overlaps '192.168.2.0-192.168.2.255' - 'My LAN (en1)' is not active
Apr 19 09:54:38 myserver servermgrd[50]: servermgr_dhcp:bootp config:Error:Subnets 'My LAN (en0)' and 'My LAN (en2)' have overlapping ranges: '1\
92.168.2.0-192.168.2.255' overlaps '192.168.2.0-192.168.2.255' - 'My LAN (en2)' is not active
Apr 19 09:54:38 myserver servermgrd[50]: servermgr_dhcp:bootp config:Error:Subnets 'My LAN (en0)' and 'My LAN (en3)' have overlapping ranges: '1\
92.168.2.0-192.168.2.255' overlaps '192.168.2.0-192.168.2.255' - 'My LAN (en3)' is not active
: and so on
The next problem I need to work through is why there's huge amounts of DHCP-related traffic in the logs. It's clogging up with stuff like this:
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP DISCOVER [en3]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: replying to 192.168.2.44
Apr 19 10:33:40 fannxfile bootpd[54475]: OFFER sent <no hostname> 192.168.2.44 pktsize 303
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000404 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP DISCOVER [en0]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: replying to 192.168.2.44
Apr 19 10:33:40 fannxfile bootpd[54475]: OFFER sent <no hostname> 192.168.2.44 pktsize 303
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000385 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP DISCOVER [en1]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: replying to 192.168.2.44
Apr 19 10:33:40 fannxfile bootpd[54475]: OFFER sent <no hostname> 192.168.2.44 pktsize 303
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000363 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP REQUEST [en2]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: replying to 192.168.2.44
Apr 19 10:33:40 fannxfile bootpd[54475]: ACK sent <no hostname> 192.168.2.44 pktsize 303
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000597 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP REQUEST [en3]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000103 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP REQUEST [en0]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000298 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP REQUEST [en1]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000153 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP REQUEST [en2]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000134 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP REQUEST [en3]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000139 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP REQUEST [en0]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000125 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP REQUEST [en1]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000174 seconds
This is happening REALLY fast. Every second there's a block of log entries like the above. I don't get it because I've set the lease times to 4 hours. I'll reset the leases back to 12 hours, but I don't understand what's causing the rapid fire log entries.
Perhaps the smart thing to do at this point is to reboot the server.
To answer some of your specific questions:
Q: Have you tried specifying the range as 192.168.0.1 - 192.168.7.254 instead? Please don't take this the wrong way but is the service actually running?
A: Yes, definitely up and running. Hosts that are in the static map were getting addresses. After deleting the three disabled Ethernet ports with conflicting ranges, I'm also seeing hosts that have not been entered into static maps appearing with dynamic IP addresses, which is what we wanted.
Regarding the suggestion to set the network range to 192.168.0.1 - 192.168.7.254: That's the range the way it was originally set, but I thought what the range was supposed to be was the smaller block of addresses you wanted DHCP to draw from out of your total subnet. I may be wrong, but doesn't DHCP service already know your total network size from the network mask? [255.255.248.0 in our case] This implies that our subnet ranges from 192.168.0.0 to 192.168.7.255 (including base and broadcast addresses at both ends).
My thought was that the "Starting IIP Address" and "Ending IP Address" wanted to be the range of addresses in that that I wanted to use as a pool for DHCP. Hence 192.168.2.0 through 192.168.2.255. We have devices with static IP addresses on our network (servers, printers, and our VoIP phone system, mostly) on 192.168.0.xxx, 192.168.1.xxx and 192.168.3.xxx, and if DHCP doubly assigns addresses in these ranges to our workstations, then we're in big trouble.
Q: sudo serveradmin fullstatus dhcp
A: ...that produces the following output now following deletion of the DHCP ports with conflicting ranges:
fannxfile:log root# serveradmin fullstatus dhcp
dhcp:setStateVersion = 1
dhcp:servicePortsAreRestricted = "NO"
dhcp:numConfiguredStaticMaps = 43
dhcp:dhcpLeasesArray:arrayindex:0:timeLeft = 12201
dhcp:dhcpLeasesArray:arrayindex:0:clientID = ""
dhcp:dhcpLeasesArray:arrayindex:0:computerName = ""
dhcp:dhcpLeasesArray:arrayindex:0:macAddress = "00:1b:63:17:a3:bd"
dhcp:dhcpLeasesArray:arrayindex:0:ipAddress = "192.168.2.21"
dhcp:dhcpLeasesArray:arrayindex:1:timeLeft = 12168
dhcp:dhcpLeasesArray:arrayindex:1:clientID = ""
dhcp:dhcpLeasesArray:arrayindex:1:computerName = ""
dhcp:dhcpLeasesArray:arrayindex:1:macAddress = "00:1b:63:17:a3:bd"
dhcp:dhcpLeasesArray:arrayindex:1:ipAddress = "192.168.2.9"
dhcp:state = "RUNNING"
dhcp:logPaths:systemLog = "/var/log/system.log"
dhcp:backendVersion = "10.5"
dhcp:timeOfModification = "2009-04-19 10:05:46 -0700"
dhcp:numDHCPActiveClients = 2
dhcp:numDHCPLeases = 2
dhcp:timeOfSnapShot = "2009-04-19 10:43:09 -0700"
dhcp:timeServiceStarted = "2009-04-19 10:05:46 -0700"
dhcp:readWriteSettingsVersion = 1
dhcp:servicePortsRestrictionInfo = emptyarray
-- Bert Sierra -
Can't start OLAPServer service after installing patches #9.0.1.3
I had a running OLAPServer service before I installed the 9i latest patches (#9.0.1.3) yesterday.
I have tried to use either Windows Service Manager or OLAP Services Instances Manager to start that service.
When I tried to use OLAP OSIM, I got error message like this :
XPINSMGR - 10565 Cannot access olap service from this database. Cause : an attempt was made to access OLAP services on a database on which it is not installed (?). Action: Install OLAP Service in the database...
I have tried to create a new database and set all the OLAP configuration, but it is still not working..
Is there someone can help me to figure out what happened ?
thanks, SjarifThank's for your suggestion. But my problem occured after I installed the 9.0.1.3.1 patch on my 9i database server (in run on XP Pro machine). I have checked OLAPDBA,OLAPSYS,and OLAPSVR security status, they are NOT LOCKED and NOT EXPIRED.
I have checked the content of OLAPServicesAgent.log file and I find ORA-03113 error.
This is the content of OLAPServicesAgent.log file:
[08-Apr-2002, 12:47:28PM] Finished waiting for init thread to finish; wait result: 0
[08-Apr-2002, 12:47:28PM] Waiting for serviceDoneEvent to be triggered.
[08-Apr-2002, 12:47:28PM] Filtering output using VERBOSE DEBUG (level 3 of 3) mode.
[08-Apr-2002, 12:47:28PM]
[08-Apr-2002, 12:47:28PM] Retrieving privilege information from registry and RDBMS.
[08-Apr-2002, 12:47:28PM] New RDBMSInstance() allocated.
[08-Apr-2002, 12:47:28PM] ztcsr failed with error code -1013
[08-Apr-2002, 12:47:28PM]
[08-Apr-2002, 12:47:37PM] GetRDBMSConnection(): setConnection() failed.
[08-Apr-2002, 12:47:37PM] Was trying to connect to tns listener, OLAPDATA, with user id, olapsvr
[08-Apr-2002, 12:47:37PM] Error message was: ORA-03113: end-of-file on communication channel
[08-Apr-2002, 12:47:37PM]
[08-Apr-2002, 12:47:37PM] Error code was: 4294967295, Function was: TxsRdbOCIConnection::connect
[08-Apr-2002, 12:47:37PM] RDBMSInstance() destructor called.
[08-Apr-2002, 12:47:37PM] New RDBMSInstance() allocated.
[08-Apr-2002, 12:47:37PM] ztcsr failed with error code -1013
[08-Apr-2002, 12:47:37PM]
[08-Apr-2002, 12:47:37PM] GetRDBMSConnection(): setConnection() failed.
[08-Apr-2002, 12:47:37PM] Was trying to connect to tns listener, OLAPDATA, with user id, olapsvr
[08-Apr-2002, 12:47:37PM] Error message was: ORA-03113: end-of-file on communication channel
[08-Apr-2002, 12:47:37PM]
[08-Apr-2002, 12:47:37PM] Error code was: 4294967295, Function was: TxsRdbOCIConnection::connect
[08-Apr-2002, 12:47:37PM] RDBMSInstance() destructor called.
[08-Apr-2002, 12:47:37PM] New RDBMSInstance() allocated.
[08-Apr-2002, 12:47:37PM] ztcsr failed with error code -1013
[08-Apr-2002, 12:47:37PM]
[08-Apr-2002, 12:47:38PM] GetRDBMSConnection(): setConnection() failed.
[08-Apr-2002, 12:47:38PM] Was trying to connect to tns listener, OLAPDATA, with user id, olapsvr
[08-Apr-2002, 12:47:38PM] Error message was: ORA-03113: end-of-file on communication channel
[08-Apr-2002, 12:47:38PM]
[08-Apr-2002, 12:47:38PM] Error code was: 4294967295, Function was: TxsRdbOCIConnection::connect
[08-Apr-2002, 12:47:38PM] RDBMSInstance() destructor called.
[08-Apr-2002, 12:47:38PM] New RDBMSInstance() allocated.
[08-Apr-2002, 12:47:38PM] ztcsr failed with error code -1013
[08-Apr-2002, 12:47:38PM]
[08-Apr-2002, 12:47:38PM] GetRDBMSConnection(): setConnection() failed.
[08-Apr-2002, 12:47:38PM] Was trying to connect to tns listener, OLAPDATA, with user id, olapsvr
[08-Apr-2002, 12:47:38PM] Error message was: ORA-03113: end-of-file on communication channel
[08-Apr-2002, 12:47:38PM]
[08-Apr-2002, 12:47:38PM] Error code was: 4294967295, Function was: TxsRdbOCIConnection::connect
[08-Apr-2002, 12:47:38PM] RDBMSInstance() destructor called.
[08-Apr-2002, 12:47:38PM] Done retrieving privilege information.
[08-Apr-2002, 12:47:38PM] Starting IOR listener on port: 7051
[08-Apr-2002, 12:47:38PM] ServiceManager Constructor called.
[08-Apr-2002, 12:47:38PM] ScmEnumServicesStatus()***ret = 234***m_hServiceManager = 1417944***bufsize = 10180***numServices = 0
[08-Apr-2002, 12:47:38PM] ScmEnumServicesStatus()***ret = 0***m_hServiceManager = 1417944***bufsize = 0***numServices = 98
[08-Apr-2002, 12:47:39PM] An access provider was found reading the Security/AuthenticationProviderPath registry key (C:\OraHome1\bin\xsapdbms.dll) for the service name, OLAPServer
[08-Apr-2002, 12:47:39PM] New RDBMSInstance() allocated.
[08-Apr-2002, 12:47:39PM] ztcsr failed with error code -1013
[08-Apr-2002, 12:47:39PM]
[08-Apr-2002, 12:47:39PM] GetRDBMSConnection(): setConnection() failed.
[08-Apr-2002, 12:47:39PM] Was trying to connect to tns listener, OLAPDATA, with user id, olapsvr
[08-Apr-2002, 12:47:39PM] Error message was: ORA-03113: end-of-file on communication channel
[08-Apr-2002, 12:47:39PM]
[08-Apr-2002, 12:47:39PM] Error code was: 4294967295, Function was: TxsRdbOCIConnection::connect
[08-Apr-2002, 12:47:39PM] RDBMSInstance() destructor called.
[08-Apr-2002, 12:47:39PM] ExecuteRDBMSCommand() failed, command = select * from ALL_OLAP_os_child_instances
[08-Apr-2002, 12:47:39PM] Unable to add Olap child instance, OLAPServer, to the Oracle ALL_OLAP_os_child_instances table.
[08-Apr-2002, 12:47:39PM] Check to see if the usernames and passwords within olap.key associated with
[08-Apr-2002, 12:47:39PM] this instance are correct. If not, use the /CreateKeyval option of xsdaemon to reset the values, or use
[08-Apr-2002, 12:47:39PM] the script provided for that purpose.
[08-Apr-2002, 12:47:39PM] xsdaemon process is terminating abnormally.
It seems to me there is a problem in OCI connection ...
Thanks.
Sjarif -
Can't start NT service for Directory Server using other acc. than LocalSys.
Hi!
I'm using Directory Server 5.1 on a Windows 2000 machine.
I wrote a Plug-In for DS that needs Administrator Access to the NT Domain. So I tried to run the DS-Service as Administrator but the service can not start. I just keeps in status "starting...".
I don't get any error message and the errorlog doesn't contain anything.
Has anyone an idea?
Thanks!
FlorianI forgot to tell one thing: I use SSL, without SSL I do not have this problem. Perhaps it's only the popup I get when starting DS, where I have to enter the certificate password?
-
Can't start Foundation Services on Windows XP, Essbase 11.1.2
Installation and & configuration were fine and everything worked for a while. Machine was rebooted. After that, I tried : "EPM System Start" from start menu, but it fails starting foundation services. I tried starting only Foundation services ... It is the same. In the starter log I can see:
Adding reference: ant.PropertyHelper
Detected Java version: 1.6 in: C:\Oracle\Middleware\jdk160_11\jre
Detected OS: Windows XP
Adding reference: ant.ComponentHelper
Setting ro project property: ant.file -> C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance\start.xml
Adding reference: ant.projectHelper
Adding reference: ant.parsing.context
Adding reference: ant.targets
parsing buildfile C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance\start.xml with URI = file:/C:/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/resources/instance/start.xml
Setting ro project property: ant.project.name -> start engine
Adding reference: start engine
Setting ro project property: ant.file.start engine -> C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance\start.xml
Project base dir set to: C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance
+Target:
+Target: start
+Target: stop
[antlib:org.apache.tools.ant] Could not load definitions from resource org/apache/tools/ant/antlib.xml. It could not be found.
[property] Loading Environment env.
Setting project property: env.TEMP -> C:\DOCUME~1\apsarch\LOCALS~1\Temp
Setting project property: env.INIT_PARAM -> EssbaseAdminServices.properties
Setting project property: env.JAVA_HOME -> C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_11
Setting project property: env.CLASSPATH -> .;C:\Oracle\Middleware\EPMSystem11R1\common\utilities\Ant\1.7.0\lib;C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_11\lib;C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\configtool.jar;
Setting project property: env.day -> 18
Setting project property: env.ProgramFiles -> C:\Program Files
Setting project property: env.Path -> C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0;C:\Oracle\Middleware\EPMSystem11R1/products/Essbase/EssbaseServer/bin;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;;C:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC\11.1.2.0;C:\Oracle\Middleware\ohs\bin;C:\Oracle\Middleware\ohs\opmn\bin;C:\Oracle\Middleware\ohs\opmn\lib;C:\Oracle\Middleware\ohs\perl\bin;C:\Oracle\Middleware\EPMSystem11R1\common\ODBC\Merant\6.0\Drivers;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server\bin;C:\Oracle\Middleware\EPMSystem11R1\common\JRE\Sun\1.6.0\bin;C:\WINDOWS\system32C:\Oracle\Middleware\EPMSystem11R1\common\utilities\Ant\1.7.0\bin;C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_11\bin;
Setting project property: env.SESSIONNAME -> RDP-Tcp#1
Setting project property: env.EPM_ORACLE_INSTANCE -> C:\Oracle\Middleware\user_projects\epmsystem1
Setting project property: env.SystemRoot -> C:\WINDOWS
Setting project property: env.EPM_ORACLE_HOME -> C:\Oracle\Middleware\EPMSystem11R1
Setting project property: env.USERNAME -> apsarch
Setting project property: env.APS_HOME -> C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\aps
Setting project property: env._JAVACMD -> C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_11\bin\java.exe
Setting project property: env.PROCESSOR_LEVEL -> 15
Setting project property: env.VSEDEFLOGDIR -> C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection
Setting project property: env.FP_NO_HOST_CHECK -> NO
Setting project property: env.USERPROFILE -> C:\Documents and Settings\apsarch
Setting project property: env.PROCESSOR_REVISION -> 0209
Setting project property: env.timestamp -> 20100618T052007
Setting project property: env.CommonProgramFiles -> C:\Program Files\Common Files
Setting project property: env.ANT_CMD_LINE_ARGS -> -debug -f C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance\start.xml start -logfile C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\starter\starter20100618T052007.log
Setting project property: env.HOMEPATH -> \Documents and Settings\apsarch
Setting project property: env.HYPERION_HOME -> C:\Oracle\Middleware\EPMSystem11R1
Setting project property: env.minute -> 20
Setting project property: env.PROCESSOR_ARCHITECTURE -> x86
Setting project property: env.OS -> Windows_NT
Setting project property: env.EAS_HOME -> C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server
Setting project property: env.CLIENTNAME -> Console
Setting project property: env.ComSpec -> C:\WINDOWS\system32\cmd.exe
Setting project property: env.PATHEXT -> .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.PSC1
Setting project property: env.PROMPT -> $P$G
Setting project property: env.dow -> Fri
Setting project property: env.ALLUSERSPROFILE -> C:\Documents and Settings\All Users
Setting project property: env.ESSLANG -> English_UnitedStates.Latin1@Binary
Setting project property: env.HOMEDRIVE -> C:
Setting project property: env.year -> 2010
Setting project property: env.PROCESSOR_IDENTIFIER -> x86 Family 15 Model 2 Stepping 9, GenuineIntel
Setting project property: env.APPDATA -> C:\Documents and Settings\apsarch\Application Data
Setting project property: env.ESSBASEPATH -> C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient
Setting project property: env.NUMBER_OF_PROCESSORS -> 1
Setting project property: env.month -> 06
Setting project property: env.second -> 07
Setting project property: env.ANT_HOME -> C:\Oracle\Middleware\EPMSystem11R1\common\utilities\Ant\1.7.0
Setting project property: env._USE_CLASSPATH -> yes
Setting project property: env.DEFLOGDIR -> C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection
Setting project property: env.ARBORPATH -> C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient
Setting project property: env.SystemDrive -> C:
Setting project property: env.TMP -> C:\DOCUME~1\apsarch\LOCALS~1\Temp
Setting project property: env.USERDOMAIN -> RYLIU-TEST
Setting project property: env.tvdebugflags -> 0x20805
Setting project property: env.hour -> 05
Setting project property: env.windir -> C:\WINDOWS
Setting project property: env.COMPUTERNAME -> RYLIU-TEST
Setting project property: env.LOGONSERVER -> \\RYLIU-TEST
Class com.hyperion.cis.ant.starter.StarterEngine loaded from parent loader (parentFirst)
+Datatype starter com.hyperion.cis.ant.starter.StarterEngine
Attempting to create object of type org.apache.tools.ant.helper.DefaultExecutor
Adding reference: ant.executor
Build sequence for target(s) `start' is [start]
Complete build sequence is [start, stop, ]
start:
[starter] Starting component: FoundationServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@b9b538[name=HyS9FoundationServices,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@1e1a408,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[],strongDependency=[],isExecuted=false]
[starter] Start time: Fri Jun 18 05:20:16 PDT 2010
[starter] End time: Fri Jun 18 05:30:11 PDT 2010. Delay : 595063ms
[starter] Operation 'start' wasn't completed
[starter] Starting component: EssbaseAdminServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@1835282[name=HyS9eas,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@9df354,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[FoundationServices.properties],strongDependency=[],isExecuted=false]
[starter] Start time: Fri Jun 18 05:30:16 PDT 2010
[starter] End time: Fri Jun 18 05:40:11 PDT 2010. Delay : 595313ms
[starter] Operation 'start' wasn't completed
BUILD SUCCESSFUL
Total time: 20 minutes 1 second
I need to run Admin Services Console & essmsh. If I try to run Admin Service Console it has error: "Could not connect to admin server" and after thae "EAS server not available". How can I start Essbase? After reboot, I can see only Hyperion Integration service started - all others not (they are set to Automatic start). Also, I see ESSBASE.exe process and couple of opmn.exe ...
Does anything else has to be started before starting EPM System start script? I really appreciate any help!Can't you install Essbase 11.1.1.x to not use Shared Services?
From the 11.1.1.3 install guide:
If you want to install Essbase in standalone mode (not using Shared Services), you can skip the installation for Shared Services. However, you must configure the Oracle's Hyperion Shared Services Registry database. To configure the Shared Services Registry database without installing Shared Services, see “Setting Up the Shared Services Registry Without Installing Shared Services” on page 112.And from page 112:
If you want to install Essbase in standalone mode (not using Shared Services), you can skip the installation for Shared Services. However, you must still configure the Shared Services Registry database. To configure the Shared Services Registry database without installing Shared Services, you run EPM System Configurator from the command line using the –forceRegistry option. This option forces the “Shared Services and Registry Database Configuration” page to display during configuration so you can enter database details for the Shared Services Registry. EPM System Configurator populates the database with tables for the Shared Services Registry, but not for Shared Services.I'm pretty sure people are running Essbase on XP boxes. That includes EAS, and maybe APS for SmartView, and that's pretty much it.
For sure XP isn't a supported environment.
Regards,
Cameron Lackpour -
Can't start xbmc.service since upgrade to xbmc 12.3-10
Hi,
I normally start xbmc via a service file and do not use a login manager, and have done successfully for some time now,
I can no longer start xbmc.service since upgrading to xbmc 12.3-10
The errors I receive in the journal are:
Feb 27 10:52:20 wolverine systemd[242]: pam_nologin(login:account): conversation failed
Feb 27 10:52:20 wolverine systemd[242]: Failed at step PAM spawning /usr/bin/xinit: Operation not permitted
Looking at the old and new xbmc.service files, the new xbmc.service now has an additional line specifying "PamName=login"
Not sure what I need to look at to fix this, any ideas are much appreciated.
I am temporarily using the old xbmc.service file from the xbmc 12.3-9 package to ensure xbmc starts.
Thanks in advance for any help.Thought I'd chime in here, as I'm having the same problem. I am using the default service file provided by the xbmc package. Commenting out PAMName=login in xbmc.service allows xbmc to start successfully on boot. If I start xbmc.service from a normal shell prompt, it will start fine even with PAMName set.
cat /usr/lib/systemd/system/xbmc.service
[Unit]
Description = Starts instance of XBMC using xinit
After = remote-fs.target
[Service]
User = xbmc
Group = xbmc
PAMName=login
Type = simple
ExecStart = /usr/bin/xinit /usr/bin/dbus-launch /usr/bin/xbmc-standalone -l /run/lirc/lircd -- :0 -nolisten tcp
Restart = on-abort
[Install]
WantedBy = multi-user.target
systemctl -l status xbmc.service
xbmc.service - Starts instance of XBMC using xinit
Loaded: loaded (/usr/lib/systemd/system/xbmc.service; enabled)
Active: failed (Result: exit-code) since Fri 2014-02-28 10:56:50 EST; 42min ago
Process: 205 ExecStart=/usr/bin/xinit /usr/bin/dbus-launch /usr/bin/xbmc-standalone -l /run/lirc/lircd -- :0 -nolisten tcp (code=exited, status=224/PAM)
Main PID: 205 (code=exited, status=224/PAM)
CGroup: /system.slice/xbmc.service
Feb 28 10:56:49 zbox systemd[1]: Starting Starts instance of XBMC using xinit...
Feb 28 10:56:49 zbox systemd[1]: Started Starts instance of XBMC using xinit.
Feb 28 10:56:50 zbox systemd[1]: xbmc.service: main process exited, code=exited, status=224/PAM
Feb 28 10:56:50 zbox systemd[1]: Unit xbmc.service entered failed state.
cat /etc/pam.d/login
#%PAM-1.0
auth required pam_securetty.so
auth requisite pam_nologin.so
auth include system-local-login
account include system-local-login
session include system-local-login -
I am not able to start my messaging server
this is what i get when i do ./start-msg01
# ./start-msg
/usr/iplanet/server5: POP3 daemon process already running: 756
/usr/iplanet/server5: IMAP4 daemon process already running: 770
/usr/iplanet/server5: HTTP daemon process already running: 785
11:02:32.76: Internal error in cl_init -- cannot open extant command option file
Starting ENS daemon
if i do netstat -an|grep 143
i can see IMAP is running
if i do netstat -an|grep 110
i can see POP3 is running
if i do netstat -an|grep 25
i can't see any service running on port 25 (smtp)
Please let me know about itcannot open extant command option file
Sounds like you have created an option file, but the server can't open it. Check permisisons and contents of all channel option files.
did this ever work? What have you changed since it last worked? -
Can't start oracle8i service after installing successfully
Hello
i have already install oracle8.1.5 on solaris intel 7
after installing, i want to start oracle service,
using oracle accout, i log in , i go to $ORACLE_HOME/bin and execute 'dbstart'
it is said 'cat can't open /etc/oratab'
my ipc parametr is:
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
set semsys:seminfo_semmni=100
set semsys:seminfo_semmsl=200
set semsys:seminfo_semmns=420
set semsys:seminfo_semopm=100
set semsys:seminfo_semvmx=32767
.profile is
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/8.1.5
ORACLE_SID=o815
PATH=$ORACLE_HOME/bin:/bin:/usr/bin
can anyone help me?
thanks a lot
liu fangHi,
check the file oratab under /etc and the permission on that.if oratab is not under etc make a search for oratab and copy that to under /etc.
try ps -ef |grep oracle
see what happened.
Yogi
[email protected] -
Can't Start FRS services.
Hi,
I can't seem to start my input, or output FRS. If I try to start the services, they stop immediatly. The following error is logged in event viewer:
The root server reported an error Configuration Problem. (Reason: Cannot find the root directory '' to start the File Repository Server.).
Any support would be greatly appreciated.
Sang.Alright here you go...give this a shot!
AGAIN...I have never used CE8 so I am not sure if CE8 had a CCM interface like BO XI does, but if it does, then this might work....
1. Open the CCM.
2. Stop the appropriate FRS and click the Properties button.
3. Type u201Cu2013RootDir <RootDirFolder>u201D at the end of the Command text box:
u201C\C$\Program Files\Business Objects\BusinessObjects Enterprise 11.5\win32_x86\outputfileserver.exeu201D -service -name <FileServerInstance> -ns <CMSClusterName> -restart -RootDir u201CD:\BO FRS\Outputu201D
4. Restart the FRS.
Edited by: Sarang Deshpande on Oct 13, 2008 2:27 PM -
I have installed "ims-5.2-zh.x86-intel-winnt4.0" in win2000 server(SP2), but I can't start both "iPlanet Job Controller" and "iPlanet Dispatcher" service, the system error code is 1067.
thanks!
I print out the conf here:"
alarm.diskavail.msgalarmdescription = "percentage mail partition diskspace available"
alarm.diskavail.msgalarmstatinterval = 3600
alarm.diskavail.msgalarmthreshold = 10
alarm.diskavail.msgalarmthresholddirection = -1
alarm.diskavail.msgalarmwarninginterval = 24
alarm.msgalarmnoticeport = 25
alarm.msgalarmnoticercpt = postmaster
alarm.msgalarmnoticesender = postmaster
alarm.serverresponse.msgalarmdescription = "server response time in seconds"
local.defdomain = zspower.com
local.enduseradmindn = "uid=msg-admin-mail.zspower.com-20041013085035, ou=People, o=zspower.com, o=internet"
local.hostname = mail.zspower.com
local.imta.imta_tailor = C:/iPlanet/Server5/msg-mail/imta/config/imta_tailor
local.imta.ssrenabled = yes
local.installeddir = C:/iPlanet/Server5/bin/msg
local.instancedir = C:/iPlanet/Server5/msg-mail
local.ldapbasedn = o=NetscapeRoot
local.ldapcachefile = C:/iPlanet/Server5/msg-mail/config/local.conf
local.ldaphost = mail.zspower.com
local.ldapport = 389
local.ldapsiedn = "cn=msg-mail, cn=iPlanet Messaging Applications, cn=Server Group, cn=mail.zspower.com, ou=zspower.com, o=NetscapeRoot"
local.ldapusessl = False
local.servergid = None
local.servername = mail
local.serverroot = C:/iPlanet/Server5
local.servertype = msg
local.serveruid = mailsrv
local.service.pab.ldapbinddn = "uid=msg-admin-mail.zspower.com-20041013085035, ou=People, o=zspower.com, o=internet"
local.service.pab.ldaphost = mail.zspower.com
local.service.pab.ldapport = 389
local.ugldapbasedn = o=internet
local.ugldapbinddn = "uid=msg-admin-mail.zspower.com-20041013085035, ou=People, o=zspower.com, o=internet"
local.ugldapdeforgdn = "o=zspower.com, o=internet"
local.ugldaphost = mail.zspower.com
local.ugldapport = 389
local.ugldapuselocal = yes
local.webmail.da.host = mail.zspower.com
local.webmail.da.port = 180
service.dcroot = o=internet
service.defaultdomain = zspower.com
store.serviceadmingroupdn = "cn=Service Administrators, ou=Groups, o=internet"have you ran ims_dssetup.pl from the hot-fix package?
have you installed iMS hot-fix?
the one supplied with the packag is a little buggy and may not work properly. -
Can't start web services in OSX Server 10.3
I used the GUI to turn on webDAV on one of my domains and now I can't even start web services.
For some reason, all of my domains now have multiple alias mappings, redirects, alias matches and redirect matches.
I have tried to delete the additional mappings from my domains, but everytime I hit save, they rewrite themselves. I deleted the domain in which I activated webDAV and recreated it and the mappings still rewrite themselves.
Any suggestions as to how to stop the automatic writing of the mappings and get my web services up and running again?
This is the last error in the httpd error log:
[Wed Mar 22 18:14:17 2006] [notice] SIGUSR1 received. Doing graceful restartHere is the info from the apache config test:
Processing config directory: /etc/httpd/sites/*.conf
Processing config file: /etc/httpd/sites/0000127.0.0.1_80macintosh.local.conf
Processing config file: /etc/httpd/sites/0001216.170.182.82_80www.volbusiness.com.conf
Syntax error on line 36 of /etc/httpd/sites/0001216.170.182.82_80www.volbusiness.com.conf:
Redirect to non-URL
From the error log:
[Sat Mar 18 04:31:21 2006] [notice] Apache/1.3.33 (Darwin) PHP/4.3.11 mod_perl/1.26 configured -- resuming normal operations
[Sat Mar 18 04:31:21 2006] [notice] Accept mutex: flock (Default: flock)
[Sat Mar 18 04:45:05 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/x-plane/
airports/cyyzoverhead.jpg
[Sat Mar 18 04:45:05 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/error.ht
ml
[Sat Mar 18 04:45:20 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/robots.txt
[Sat Mar 18 04:45:24 2006] [error] [client 151.44.166.127] File does not exist: /Library/WebServer/Documents/masterfritts/favicon.
ico
[Sat Mar 18 04:45:24 2006] [error] [client 151.44.166.127] File does not exist: /Library/WebServer/Documents/masterfritts/error.ht
ml
[Sat Mar 18 04:45:27 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/favicon.
ico
[Sat Mar 18 04:45:27 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/error.ht
ml
[Sat Mar 18 04:45:31 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/favicon.
ico
[Sat Mar 18 04:45:31 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/error.ht
ml
[Sat Mar 18 04:45:58 2006] [error] [client 151.44.166.127] File does not exist: /Library/WebServer/Documents/masterfritts/favicon.
ico
[Sat Mar 18 04:45:58 2006] [error] [client 151.44.166.127] File does not exist: /Library/WebServer/Documents/masterfritts/error.ht
ml
[Sat Mar 18 04:47:57 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/robots.t
xt
[Sat Mar 18 04:47:57 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/error.ht
ml
[Sat Mar 18 04:57:55 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/ultrabou
vi.jpg
[Sat Mar 18 04:57:55 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/error.ht
ml
[Sat Mar 18 05:14:38 2006] [error] [client 202.160.180.194] File does not exist: /Library/WebServer/Documents/masterfritts/robots.
txt
[Sat Mar 18 05:14:38 2006] [error] [client 202.160.180.194] File does not exist: /Library/WebServer/Documents/masterfritts/error.h
tml
[Sat Mar 18 05:18:57 2006] [error] [client 66.249.65.230] File does not exist: /Library/WebServer/Documents/masterfritts/robots.tx
t
[Sat Mar 18 05:18:57 2006] [error] [client 66.249.65.230] File does not exist: /Library/WebServer/Documents/masterfritts/error.htm -
Hi
I have 1 rootCA and 1 subordinate CA. I removed one of the locations to publish CRL and after that the ADCS service can't start. I get the warning first:
Revocation status for a certificate in the chain for CA certificate 2 for siu-SRVDC01-CA could not be verified because a server is currently unavailable. The revocation function was unable to check revocation because the revocation server was offline.
0x80092013 (-2146885613 CRYPT_E_REVOCATION_OFFLINE).
And then the error:
Active Directory Certificate Services did not start: Could not load or verify the current CA certificate. siu-SRVDC01-CA The revocation function was unable to check revocation because the revocation server was offline. 0x80092013 (-2146885613 CRYPT_E_REVOCATION_OFFLINE).
I've read many threads with similar problems but I can't find the solution. The CDP is online. I've run "certutil -url cert.cer" to verify the CDP and AIA and everything is fine. But the service is still not starting.
See this command too:
C:\>certutil -verify -urlfetch subCADC01.cer
Issuer:
CN=siu-SRVDC02-CA
DC=siu
DC=domain
Name Hash(sha1): 152a7c43f186d9179c1c3256d3a1a0af4a9df892
Name Hash(md5): b409e417a38bbe04b5800512bd94efac
Subject:
CN=siu-SRVDC01-CA
DC=siu
DC=domain
Name Hash(sha1): 5ee421b84c3b18ff134cf2e42226853d78d3409b
Name Hash(md5): e1a454692361733e45dad374dc14cae3
Cert Serial Number: 1e0000022c707c76c0a27b315700000000022c
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN_EXCLUDE_ROOT (0x40000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwRevocationFreshnessTime: 1 Hours, 2 Minutes, 16 Seconds
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwRevocationFreshnessTime: 1 Hours, 2 Minutes, 16 Seconds
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=siu-SRVDC02-CA, DC=siu, DC=domain
NotBefore: 19.03.2015 11:18
NotAfter: 19.03.2017 11:28
Subject: CN=siu-SRVDC01-CA, DC=siu, DC=domain
Serial: 1e0000022c707c76c0a27b315700000000022c
Template: SubCA
a1a8a95464c5b586da6e9b304142d59fc5a22ae0
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 0
[0.0] http://wwwca/CertEnroll/srvdc02.siu.domain_siu-SRVDC02-CA.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (26)" Time: 0
[0.0] http://sharepoint.siu.no:8088/siu-SRVDC02-CA.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 26:
Issuer: CN=siu-SRVDC02-CA, DC=siu, DC=domain
ThisUpdate: 19.03.2015 11:10
NextUpdate: 15.09.2015 23:30
e2ee543a68214f9b99dda2e9f58b1ddfc34429d1
CertContext[0][1]: dwInfoStatus=10c dwErrorStatus=0
Issuer: CN=siu-SRVDC02-CA, DC=siu, DC=domain
NotBefore: 23.09.2011 13:00
NotAfter: 23.09.2021 13:10
Subject: CN=siu-SRVDC02-CA, DC=siu, DC=domain
Serial: 60fc459ebdefa5b646a081b0c21c259d
4ea8bb95b0038c69a83c939e8a54f892cd0b5056
Element.dwInfoStatus = CERT_TRUST_HAS_NAME_MATCH_ISSUER (0x4)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
No URLs "None" Time: 0
---------------- Certificate CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
Exclude leaf cert:
691f7e42f5c4a86d03b7225bf7303369ef6dcc7e
Full chain:
17e5b9477a1736c33dc0ff245e7b06de5b958c4c
Verified Issuance Policies: None
Verified Application Policies: All
Cert is a CA certificate
Leaf certificate revocation check passed
CertUtil: -verify command completed successfully.
Any clue?It looks like it is trying to get the CRL using LDAP. It is quite strange since no ldap entry is on the subordinate CA,
only an HTTP address:
<CertificateRevocationList location="TvoCache" url="ldap:///CN=siu-SRVDC02-CA,CN=srvdc02,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=siu,DC=domain?certificateRevocationList?base?objectClass=cRLDistributionPoint"
fileRef="DEEB557897A9FEA217DF83D95BF24CA54051B1CF.crl" issuerName="siu-SRVDC02-CA" />
<CertificateRevocationList deltaCRL="true" location="TvoCache" url="ldap:///CN=siu-SRVDC02-CA,CN=srvdc02,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=siu,DC=domain?deltaRevocationList?base?objectClass=cRLDistributionPoint"
I have checked that object using adsi Edit and the permissions seem ok. Also there is a value on both attributes: certificateRevocationList and deltaRevocationList.
This problem happened after I removed the LDAP entry for the "CRL Distribution point" from the sub CA properties. Should I add back the LDAP entry?
Log Name: Microsoft-Windows-CAPI2/Operational
Source: Microsoft-Windows-CAPI2
Date: 19.03.2015 14:42:07
Event ID: 11
Task Category: Build Chain
Level: Error
Keywords: Path Discovery,Path Validation
User: SYSTEM
Computer: srvdc01.siu.domain
Description:
For more details for this event, please refer to the "Details" section
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CAPI2" Guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" />
<EventID>11</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>11</Task>
<Opcode>2</Opcode>
<Keywords>0x4000000000000003</Keywords>
<TimeCreated SystemTime="2015-03-19T13:42:07.481533500Z" />
<EventRecordID>131</EventRecordID>
<Correlation />
<Execution ProcessID="6288" ThreadID="5472" />
<Channel>Microsoft-Windows-CAPI2/Operational</Channel>
<Computer>srvdc01.siu.domain</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<CertGetCertificateChain>
<Certificate fileRef="E02AA2C59FD54241309B6EDA86B5C56454A9A8A1.cer" subjectName="siu-SRVDC01-CA" />
<ExtendedKeyUsage />
<Flags value="40000000" CERT_CHAIN_REVOCATION_CHECK_CHAIN_EXCLUDE_ROOT="true" />
<ChainEngineInfo context="machine" />
<CertificateChain chainRef="{60B61582-1C3C-4B58-AE8C-70278ADEE402}" revocationFreshnessTime="P2DT21H13M20S">
<TrustStatus>
<ErrorStatus value="1000040" CERT_TRUST_REVOCATION_STATUS_UNKNOWN="true" CERT_TRUST_IS_OFFLINE_REVOCATION="true" />
<InfoStatus value="100" CERT_TRUST_HAS_PREFERRED_ISSUER="true" />
</TrustStatus>
<ChainElement>
<Certificate fileRef="E02AA2C59FD54241309B6EDA86B5C56454A9A8A1.cer" subjectName="siu-SRVDC01-CA" />
<SignatureAlgorithm oid="1.2.840.113549.1.1.5" hashName="SHA1" publicKeyName="RSA" />
<PublicKeyAlgorithm oid="1.2.840.113549.1.1.1" publicKeyName="RSA" publicKeyLength="2048" />
<TrustStatus>
<ErrorStatus value="1000040" CERT_TRUST_REVOCATION_STATUS_UNKNOWN="true" CERT_TRUST_IS_OFFLINE_REVOCATION="true" />
<InfoStatus value="102" CERT_TRUST_HAS_KEY_MATCH_ISSUER="true" CERT_TRUST_HAS_PREFERRED_ISSUER="true" />
</TrustStatus>
<ApplicationUsage any="true" />
<IssuanceUsage />
<RevocationInfo freshnessTime="P2DT21H13M20S">
<RevocationResult value="80092013">The revocation function was unable to check revocation because the revocation server was offline.</RevocationResult>
<StrongSignProperties signHash="RSA/SHA1" issuerPublicKeyLength="2048" />
<DeltaStrongSignProperties signHash="RSA/SHA1" issuerPublicKeyLength="2048" />
<CertificateRevocationList location="TvoCache" url="ldap:///CN=siu-SRVDC02-CA,CN=srvdc02,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=siu,DC=domain?certificateRevocationList?base?objectClass=cRLDistributionPoint"
fileRef="DEEB557897A9FEA217DF83D95BF24CA54051B1CF.crl" issuerName="siu-SRVDC02-CA" />
<CertificateRevocationList deltaCRL="true" location="TvoCache" url="ldap:///CN=siu-SRVDC02-CA,CN=srvdc02,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=siu,DC=domain?deltaRevocationList?base?objectClass=cRLDistributionPoint"
fileRef="58A2CDBC7A238DDD76EEFEDE354A04596F5AED71.crl" issuerName="siu-SRVDC02-CA" />
</RevocationInfo>
</ChainElement>
<ChainElement>
<Certificate fileRef="56500BCD92F8548A9E933CA8698C03B095BBA84E.cer" subjectName="siu-SRVDC02-CA" />
<SignatureAlgorithm oid="1.2.840.113549.1.1.5" hashName="SHA1" publicKeyName="RSA" />
<PublicKeyAlgorithm oid="1.2.840.113549.1.1.1" publicKeyName="RSA" publicKeyLength="2048" />
<TrustStatus>
<ErrorStatus value="0" />
<InfoStatus value="10C" CERT_TRUST_HAS_NAME_MATCH_ISSUER="true" CERT_TRUST_IS_SELF_SIGNED="true" CERT_TRUST_HAS_PREFERRED_ISSUER="true" />
</TrustStatus>
<ApplicationUsage any="true" />
<IssuanceUsage any="true" />
</ChainElement>
</CertificateChain>
<EventAuxInfo ProcessName="certsrv.exe" />
<CorrelationAuxInfo TaskId="{54E4FCD3-E70A-4024-BB81-6A053EAACE21}" SeqNumber="9" />
<Result value="80092013">The revocation function was unable to check revocation because the revocation server was offline.</Result>
</CertGetCertificateChain>
</UserData>
</Event>
Maybe you are looking for
-
Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all networ
-
I'm currently designing a new website. It will be a very informative website (for dog owners in the city I live in), but it should also be fun and just useful. I already have two websites, done in iWeb, and I want this one to be even more professiona
-
Hard to find ripping naming conventions
?In Mediasource Player 3.3, I had a really hard time finding the naming convention settingsdialog. It is in the media folder format settings option. I ended up with a bunch of ripped tracksthat had the track name twice and couldn't find the option. H
-
Using the Camera connection kit Previously downloaded files were recognised and only new pictures were uploaded. Doesn't seem to work in IOS 5. I was using the Ipad as a photos backup and display device.
-
Freezing scroll bar in list box
Hello, I want the user to be able to read the list while I add new items to it. the problem is that whenever a new item is added to the list the scroll jumps up - I want it to stay where ever it was (in case the user scrolled it...) thanks