I can't start Illustrator CC on Windows 8.1 64bit.

I can't start Illustrator CC on Windows 8.1 64bit.

I've installed some apps (Photoshop, InDesign, Flash, Dreamweaver, Acrobat, Muse) from Cloud and they work correctly. When I try to run Illustrator there's an infromation on screen (error raport) that Illustrator can't work 'cos of system operation language (cannot run with Unicode).
I don't know what to do in this case?
My system is Windows 8.1 64bit.
Language is Polish, could it be bacause of that?
Regards

Similar Messages

  • Can I use Illustrator 9 with Windows 7 OS?

    Can I use Illustrator 9 with windows 7 OS?

    taciadomrose,
    You may need to run the computer in XP mode to install it (you may try in normal mode first). Here is how:
    http://windows.microsoft.com/en-us/windows7/install-and-use-windows-xp-mode-in-windows-7
    Once installed, you should be able to get it to run with the PC in normal mode as follows (first run):
    1) RightClick the shortcut;
    2) Click Properties;
    3) Click Compatibility;
    4) Tick Run this program in Compatibility mode for, then select XP in the dropdown list;
    5) Start AI9.
    After that, you can just DoubleClick the shortcut.

  • Can't start Foundation Services on Windows XP, Essbase 11.1.2

    Installation and & configuration were fine and everything worked for a while. Machine was rebooted. After that, I tried : "EPM System Start" from start menu, but it fails starting foundation services. I tried starting only Foundation services ... It is the same. In the starter log I can see:
    Adding reference: ant.PropertyHelper
    Detected Java version: 1.6 in: C:\Oracle\Middleware\jdk160_11\jre
    Detected OS: Windows XP
    Adding reference: ant.ComponentHelper
    Setting ro project property: ant.file -> C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance\start.xml
    Adding reference: ant.projectHelper
    Adding reference: ant.parsing.context
    Adding reference: ant.targets
    parsing buildfile C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance\start.xml with URI = file:/C:/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/resources/instance/start.xml
    Setting ro project property: ant.project.name -> start engine
    Adding reference: start engine
    Setting ro project property: ant.file.start engine -> C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance\start.xml
    Project base dir set to: C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance
    +Target:
    +Target: start
    +Target: stop
    [antlib:org.apache.tools.ant] Could not load definitions from resource org/apache/tools/ant/antlib.xml. It could not be found.
    [property] Loading Environment env.
    Setting project property: env.TEMP -> C:\DOCUME~1\apsarch\LOCALS~1\Temp
    Setting project property: env.INIT_PARAM -> EssbaseAdminServices.properties
    Setting project property: env.JAVA_HOME -> C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_11
    Setting project property: env.CLASSPATH -> .;C:\Oracle\Middleware\EPMSystem11R1\common\utilities\Ant\1.7.0\lib;C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_11\lib;C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\configtool.jar;
    Setting project property: env.day -> 18
    Setting project property: env.ProgramFiles -> C:\Program Files
    Setting project property: env.Path -> C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0;C:\Oracle\Middleware\EPMSystem11R1/products/Essbase/EssbaseServer/bin;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;;C:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC\11.1.2.0;C:\Oracle\Middleware\ohs\bin;C:\Oracle\Middleware\ohs\opmn\bin;C:\Oracle\Middleware\ohs\opmn\lib;C:\Oracle\Middleware\ohs\perl\bin;C:\Oracle\Middleware\EPMSystem11R1\common\ODBC\Merant\6.0\Drivers;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server\bin;C:\Oracle\Middleware\EPMSystem11R1\common\JRE\Sun\1.6.0\bin;C:\WINDOWS\system32C:\Oracle\Middleware\EPMSystem11R1\common\utilities\Ant\1.7.0\bin;C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_11\bin;
    Setting project property: env.SESSIONNAME -> RDP-Tcp#1
    Setting project property: env.EPM_ORACLE_INSTANCE -> C:\Oracle\Middleware\user_projects\epmsystem1
    Setting project property: env.SystemRoot -> C:\WINDOWS
    Setting project property: env.EPM_ORACLE_HOME -> C:\Oracle\Middleware\EPMSystem11R1
    Setting project property: env.USERNAME -> apsarch
    Setting project property: env.APS_HOME -> C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\aps
    Setting project property: env._JAVACMD -> C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_11\bin\java.exe
    Setting project property: env.PROCESSOR_LEVEL -> 15
    Setting project property: env.VSEDEFLOGDIR -> C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection
    Setting project property: env.FP_NO_HOST_CHECK -> NO
    Setting project property: env.USERPROFILE -> C:\Documents and Settings\apsarch
    Setting project property: env.PROCESSOR_REVISION -> 0209
    Setting project property: env.timestamp -> 20100618T052007
    Setting project property: env.CommonProgramFiles -> C:\Program Files\Common Files
    Setting project property: env.ANT_CMD_LINE_ARGS -> -debug -f C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance\start.xml start -logfile C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\starter\starter20100618T052007.log
    Setting project property: env.HOMEPATH -> \Documents and Settings\apsarch
    Setting project property: env.HYPERION_HOME -> C:\Oracle\Middleware\EPMSystem11R1
    Setting project property: env.minute -> 20
    Setting project property: env.PROCESSOR_ARCHITECTURE -> x86
    Setting project property: env.OS -> Windows_NT
    Setting project property: env.EAS_HOME -> C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server
    Setting project property: env.CLIENTNAME -> Console
    Setting project property: env.ComSpec -> C:\WINDOWS\system32\cmd.exe
    Setting project property: env.PATHEXT -> .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.PSC1
    Setting project property: env.PROMPT -> $P$G
    Setting project property: env.dow -> Fri
    Setting project property: env.ALLUSERSPROFILE -> C:\Documents and Settings\All Users
    Setting project property: env.ESSLANG -> English_UnitedStates.Latin1@Binary
    Setting project property: env.HOMEDRIVE -> C:
    Setting project property: env.year -> 2010
    Setting project property: env.PROCESSOR_IDENTIFIER -> x86 Family 15 Model 2 Stepping 9, GenuineIntel
    Setting project property: env.APPDATA -> C:\Documents and Settings\apsarch\Application Data
    Setting project property: env.ESSBASEPATH -> C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient
    Setting project property: env.NUMBER_OF_PROCESSORS -> 1
    Setting project property: env.month -> 06
    Setting project property: env.second -> 07
    Setting project property: env.ANT_HOME -> C:\Oracle\Middleware\EPMSystem11R1\common\utilities\Ant\1.7.0
    Setting project property: env._USE_CLASSPATH -> yes
    Setting project property: env.DEFLOGDIR -> C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection
    Setting project property: env.ARBORPATH -> C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient
    Setting project property: env.SystemDrive -> C:
    Setting project property: env.TMP -> C:\DOCUME~1\apsarch\LOCALS~1\Temp
    Setting project property: env.USERDOMAIN -> RYLIU-TEST
    Setting project property: env.tvdebugflags -> 0x20805
    Setting project property: env.hour -> 05
    Setting project property: env.windir -> C:\WINDOWS
    Setting project property: env.COMPUTERNAME -> RYLIU-TEST
    Setting project property: env.LOGONSERVER -> \\RYLIU-TEST
    Class com.hyperion.cis.ant.starter.StarterEngine loaded from parent loader (parentFirst)
    +Datatype starter com.hyperion.cis.ant.starter.StarterEngine
    Attempting to create object of type org.apache.tools.ant.helper.DefaultExecutor
    Adding reference: ant.executor
    Build sequence for target(s) `start' is [start]
    Complete build sequence is [start, stop, ]
    start:
    [starter] Starting component: FoundationServices.properties
    [starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@b9b538[name=HyS9FoundationServices,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@1e1a408,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[],strongDependency=[],isExecuted=false]
    [starter] Start time: Fri Jun 18 05:20:16 PDT 2010
    [starter] End time: Fri Jun 18 05:30:11 PDT 2010. Delay : 595063ms
    [starter] Operation 'start' wasn't completed
    [starter] Starting component: EssbaseAdminServices.properties
    [starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@1835282[name=HyS9eas,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@9df354,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[FoundationServices.properties],strongDependency=[],isExecuted=false]
    [starter] Start time: Fri Jun 18 05:30:16 PDT 2010
    [starter] End time: Fri Jun 18 05:40:11 PDT 2010. Delay : 595313ms
    [starter] Operation 'start' wasn't completed
    BUILD SUCCESSFUL
    Total time: 20 minutes 1 second
    I need to run Admin Services Console & essmsh. If I try to run Admin Service Console it has error: "Could not connect to admin server" and after thae "EAS server not available". How can I start Essbase? After reboot, I can see only Hyperion Integration service started - all others not (they are set to Automatic start). Also, I see ESSBASE.exe process and couple of opmn.exe ...
    Does anything else has to be started before starting EPM System start script? I really appreciate any help!

    Can't you install Essbase 11.1.1.x to not use Shared Services?
    From the 11.1.1.3 install guide:
    If you want to install Essbase in standalone mode (not using Shared Services), you can skip the installation for Shared Services. However, you must configure the Oracle's Hyperion Shared Services Registry database. To configure the Shared Services Registry database without installing Shared Services, see “Setting Up the Shared Services Registry Without Installing Shared Services” on page 112.And from page 112:
    If you want to install Essbase in standalone mode (not using Shared Services), you can skip the installation for Shared Services. However, you must still configure the Shared Services Registry database. To configure the Shared Services Registry database without installing Shared Services, you run EPM System Configurator from the command line using the –forceRegistry option. This option forces the “Shared Services and Registry Database Configuration” page to display during configuration so you can enter database details for the Shared Services Registry. EPM System Configurator populates the database with tables for the Shared Services Registry, but not for Shared Services.I'm pretty sure people are running Essbase on XP boxes. That includes EAS, and maybe APS for SmartView, and that's pretty much it.
    For sure XP isn't a supported environment.
    Regards,
    Cameron Lackpour

  • Can we start JavaWebStart Application as Windows service

    Hi,
    Can we have JavaWebStart application as windows service?
    Thanks
    LeoSun

    Hi LeoSun,
    I dont exactly how to start this is as a window service, but if your requirement is just to start your application when the machine boots,
    then you can create a shortcut for ur webstart app, using the jnlp tag <shortcut>
    then add this shortcut to your windows startup folder.

  • Can you start Illustrator CC2014 with more RAM?

    I am using Illustrator to edit very large SVG files (>150MB), and the software is extremely slow and stops responding periodically, while it (slowly, slowly) acquires more RAM. Is there a way to start Illustrator with a larger amount of RAM, e.g. 8 or 16 GB?
    I'm working on a MacPro with 32 GB of RAM, two 6-core processors, an NVIDIA Quadro K5000 video card (4GB RAM) and tons of free disc space. It's very frustrating to see Illustrator not taking advantage of the available machine resources! I scoured the web for solutions and came up empty-handed.... Any tips?

    There is nothing you can do. Even if you could assign a fixed memory range, the program would still need to load the objects one by one and render them, so it actualyl doesn't even make sense to think of it that way...
    Mylenium

  • Can't start report server on windows 2000

    I can't start report server with error code 186, my tnsname.ora is
    REP60_DUQ = Rep60_DUQ
    is it error?
    who can tell me how to resolve it!!!

    but I have add tnsnames.ora following
    Rep60_REPORT_SERVER =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = REPORT_SERVER)(PORT = 1951))
    then I start report server with:
    /PATH_TO_REPORTSERVER/report60_server start
    it still says:
    REP-0186: Daemon failed to listen to port
    what is problem?
    any thing must be done to activate changes in
    tnsnames.ora?
    null

  • Can't start FM 9 on Windows 7: "cannot initialize dictionaries"

    I am trying to move a copy of FM 9 from an old laptop to a new one running Windows 7 Enterprise. My IT guy reinstalled the software from CD and applied my license key. When I try to start FM, it gives this error during the "Core" startup: "FrameMaker cannot initialize its dictionaries. Either the LanguageDir entry specified in the initialization file is missing or incorrect, or the files in the LanguageDir are missing or corrupted."
    I still have the old laptop, so I can compare and copy the files and directories directly. As far as I can see, the LanguageDir entry in the maker.ini is identical on both machines. Both have a dict folder, and I see the same number of files in both. Just for good measure I copied the old folder's contents across to the new folder, but that didn't help.

    Very good that you found the cause. I remember now that it was recommended to copy the installation files to your hard disk. See the FrameMaker online help:
    http://helpx.adobe.com/framemaker/kb/troubleshoot-installation-problems-framemaker-9.html
    http://helpx.adobe.com/framemaker/kb/troubleshoot-errors-or-freezes-installation.html

  • Can't start reports server on Windows Server 2003 SP1 Error code 13

    Hi,
    This morning I figured how to start the rwserver using the command, rwserver server = repsrv. This works using XP pro physical machine but now I am trying to perform the same task on a Windows 2003 virtual machine.
    I have used the line:
    rwserver -install repsrv.
    To add repserv to the list of available services in computer management. This has appeared as an avaiable service and so I click to start it, unfortunately every time I do I get the error message:
    "Windows could not start the OracleOraAppServer10g_home1Reports [repsrv] on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 133."
    I am assuming this is a security issue with Windows 2003 but I can't find a cure anywhere.
    Thanks in advance for any help that anybody is able to provide
    Cheers
    Daniel

    Hello,
    Step 1) Check that you can start the reports server from a "DOS Window" :
    rwserver server=repserver
    Step 2) Check the PATH set for rwserver.exe when it is running as a service
    Some sysinternals utilities like Process Explorer / filemon may help :
    http://www.sysinternals.com/
    Regards

  • HT2250 can not start bonjour service in windows

    In windows 7, when use msconfig to enable bonjour service, but i can't , it does show stopped , try to enable but can't, any suggestion what to do ??

    Hi,
    Login as Administrator in win2k, start TNSListener first, and then
    Managementmentserver Second.
    Use Control panel or
    C:/>net start <managementservername>
    Regards
    karthik

  • Can not start IntegratedWeblogicServer in JDeveloper (windows)

    Jdev 11.1.1.6.2 in Windows 7 64 bits.
    Start config IntegratedWeblogicServer, after log shows
    executing startWebLogic script...
    c:\Users\phkang.APPLICATIONS\AppData\Roaming\JDeveloper\system11.1.1.6.39.62.68\DefaultDomain\bin\startWeblogic.cmd
    sleeping for 90 seconds while server start up .....................
    AdminServer log files still does not exist, sleep another 10 seconds
    AdminServer log files still does not exist, sleep another 10 seconds
    AdminServer log files still does not exist, sleep another 10 seconds
    AdminServer log files still does not exist, sleep another 10 seconds
    then it stucks saying log files still does not exist.
    Any solutions?

    Hi,
    JDeveloper 11.1.1.6.2 doesn't appear to be a public JDeveloper build so the assumption may be made that this is a problem with your Oracle internal version of JDeveloper. We can't comment on this build as we don't have experience with this build here on OTN. Try your internal channels
    Frank

  • Can't start Illustrator, because Software License Agreement won't go away.

    I just downloaded a trial of CS5 illustrator on my pc running windows 7. The installation appeared to go smoothly, but I am unable to start illstrator; Each time I try to start it, I am greeted with the "Software License Agreement" screen. When I click "Accept" the screen disappears and then I have to start all over again. Anyone know how I might solve this.
    Thanks!

    Try the Illustrator forum.
    Bob

  • LMS 3.1: Can't start LMS Daemon on Window 2003

    Hi,
    Since customer has reboot, LMS daemons don't start.
    We have this message :
    C:\Documents and Settings\Administrator>net start crmdmgtd
    The service is not responding to the control function.
    More help is available by typing NET HELPMSG 2186.
    I made a search on forum, I find a similar issue but with W2K8 we try the solution given (changing swap) but it doesn't resolved.
    You will find screenshot.
    Thanks,
    Elisabeth

    This is what I thought.  If you have a known good backup of LMS, you can restore that.  Alternatively, you can reinstall LMS from scratch.  You can also contact TAC, and they can walk you through trying to rebuild this file using the registry.

  • Can't start Safari 4 on windows xp

    I recently installed Safari 4 on windows xp.
    At first it seemed to work fine, then it froze when I had over 6 tabs open.
    None of them would refresh.
    I had to end the process to shut Safari 4 down.
    I was able to restart Safari a couple more times but eventually Safari just won't start at all.
    I restarted the pc a few times. I uninstalled and reinstalled Safari 4 but nothing works.
    Any suggestions?
    Thanks your help is appreciated

    I'm having a similar problem on Vista Home Premium (64bit). Safari 3 was working fine but after running the Apple Updater and installing Safari 4 it will not display on desktop. Checking processes running Safari is resident and running, consuming about 13mb of mem, zero cpu cycles, and 3 threads. I have a 4 cpu system (x9650) with 4gb mem. Tried completely removing (using the apple uninstaller and windows uninstaller)and re-installing with a fresh download of Safari 4. Still will not display the browser.
    Tried searching the web for others having this problem but not seeing much out there. Either these are corner cases or people are just giving up. Any thoughts on next steps?

  • SQL Data Sync Agent can not start - Debug error in windows 7 x86

    Log file as per below
    LocalAgentHost 1/3/2013 11:55:31 AM  id:LocalAgentHost_Info, rId:, sId:00000000-0000-0000-0000-000000000000, traceLevel:Info, agentId:00000000-0000-0000-0000-000000000000, agentInstanceId:00000000-0000-0000-0000-000000000000, version:4.0.89.0, methodName:Main,
    message:Microsoft SQL Data Sync Windows service is starting as a Windows Service.
    LocalAgentHost 1/3/2013 11:55:31 AM  id:LocalAgentHost_Info, rId:, sId:00000000-0000-0000-0000-000000000000, traceLevel:Info, agentId:00000000-0000-0000-0000-000000000000, agentInstanceId:00000000-0000-0000-0000-000000000000, version:4.0.89.0, methodName:OnStart,
    message:Microsoft SQL Data Sync Windows service starting.
    LocalAgentHost 1/3/2013 11:55:31 AM  id:LocalAgentHost_Info, rId:, sId:00000000-0000-0000-0000-000000000000, traceLevel:Info, agentId:00000000-0000-0000-0000-000000000000, agentInstanceId:00000000-0000-0000-0000-000000000000, version:4.0.89.0, methodName:OnStart,
    message:Starting a service worker thread.
    LocalAgentHost 1/3/2013 11:55:32 AM  id:LocalAgentHost_Info, rId:, sId:00000000-0000-0000-0000-000000000000, traceLevel:Info, agentId:6843e83c-6015-433c-97ae-4cb63815f4b5, agentInstanceId:bbd9490b-e160-4176-8988-9707b79ecd75, version:4.0.89.0, methodName:OnStart,
    message:Started a service worker thread.
    LocalAgentHost 1/3/2013 11:55:32 AM  id:LocalAgentHost_Info, rId:, sId:00000000-0000-0000-0000-000000000000, traceLevel:Info, agentId:6843e83c-6015-433c-97ae-4cb63815f4b5, agentInstanceId:bbd9490b-e160-4176-8988-9707b79ecd75, version:4.0.89.0, methodName:OnStart,
    message:Microsoft SQL Data Sync Windows service started successfully.
    LocalAgentHost 1/3/2013 11:55:32 AM  id:LocalAgentHost_Info, rId:, sId:00000000-0000-0000-0000-000000000000, traceLevel:Info, agentId:6843e83c-6015-433c-97ae-4cb63815f4b5, agentInstanceId:bbd9490b-e160-4176-8988-9707b79ecd75, version:4.0.89.0, methodName:StartUxWcfService,
    message: Namedpipe bd54233d-16ce-46d3-8858-5e564732b21c, BaseAddress net.pipe://localhost/bd54233d-16ce-46d3-8858-5e564732b21c
    LocalAgentHost 1/3/2013 11:55:32 AM  id:LocalAgentHost_Info, rId:, sId:00000000-0000-0000-0000-000000000000, traceLevel:Info, agentId:6843e83c-6015-433c-97ae-4cb63815f4b5, agentInstanceId:bbd9490b-e160-4176-8988-9707b79ecd75, version:4.0.89.0, methodName:StartUxWcfService,
    message: Opened WCF Host
    LocalAgentHost 1/3/2013 11:55:32 AM  id:LocalAgentHost_Info, rId:, sId:00000000-0000-0000-0000-000000000000, traceLevel:Info, agentId:6843e83c-6015-433c-97ae-4cb63815f4b5, agentInstanceId:bbd9490b-e160-4176-8988-9707b79ecd75, version:4.0.89.0, methodName:StartServiceThread,
    message: GetEntryAssembly().Location: C:\Program Files (x86)\Microsoft SQL Data Sync\bin\LocalAgentHost.exe, GetExecutingAssembly().Location: C:\Program Files (x86)\Microsoft SQL Data Sync\bin\LocalAgentHost.exe, Process.GetCurrentProcess().StartInfo.WorkingDirectory:
    LocalAgentHost 1/3/2013 11:55:37 AM  id:LocalAgentHost_Info, rId:, sId:00000000-0000-0000-0000-000000000000, traceLevel:Info, agentId:6843e83c-6015-433c-97ae-4cb63815f4b5, agentInstanceId:bbd9490b-e160-4176-8988-9707b79ecd75, version:4.0.89.0, methodName:AgentConfigDataManager.DownloadAndCacheServiceUrisFromLocator,
    message:Scale unit found
    AgentCore 1/3/2013 11:55:40 AM  id:AgentCore_InstanceStarted, rId:, sId:65915150-1284-4a17-9c13-d58e2830fcd9, agentId:6843e83c-6015-433c-97ae-4cb63815f4b5, agentInstanceId:bbd9490b-e160-4176-8988-9707b79ecd75, version:4.0.89.0
    ThreadId:40. Dispatcher started. Waiting
    ThreadId:43. GetRequest started.
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:46. GetRequest started.
    ThreadId:41. GetRequest started.
    ThreadId:48. GetRequest started.
    ThreadId:45. GetRequest started.
    ThreadId:42. GetRequest started.
    ThreadId:47. GetRequest started.
    ThreadId:44. GetRequest started.
    ThreadId:49. GetRequest started.
    ThreadId:50. GetRequest started.
    ThreadId:51. GetRequest started.
    ThreadId:52. GetRequest started.
    ThreadId:53. GetRequest started.
    ThreadId:54. GetRequest started.
    ThreadId:55. GetRequest started.
    ThreadId:56. GetRequest started.
    ThreadId:57. GetRequest started.
    ThreadId:58. GetRequest started.
    ThreadId:59. GetRequest started.
    ThreadId:60. GetRequest started.
    ThreadId:61. GetRequest started.
    ThreadId:62. GetRequest started.
    ThreadId:63. GetRequest started.
    ThreadId:64. GetRequest started.
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest
    ThreadId:40. Dispatcher calling GetRequest

    Hi,
    I believe that your issue is resolved by now. Please try this step is the issue still persists.
    its security issues and re-install the data sync with domainname\Myaccount user and give the user as adminitsrator privileges and change the time of your system.
    http://social.technet.microsoft.com/wiki/contents/articles/2655.sql-azure-data-sync-troubleshooting-guide.aspx
    Girish Prajwal

  • Linux dac 11g server can not start when copy from windows

    when I install the dac 11g on windows7 64bit then copy it to Linux server 64bit , after the dac_env.sh and config.sh configuration , the serverclient.sh can launch , but when start the dac
    server, there is a exception about the credentials :
    Apr 1, 2013 10:41:07 AM com.siebel.analytics.etl.security.WalletFileUtils getMissingCredentialMessage
    SEVERE: Credentials don't exist: map=oracle.dac.repository key=userCredEnc.
    Apr 1, 2013 10:41:07 AM com.siebel.etl.engine.core.ETLUtils logException
    SEVERE:
    ANOMALY INFO::: Can't read credentials from default server db credentials file
    MESSAGE:::Credentials don't exist!
    Make sure the properly configured cwallet file is used.
    EXCEPTION CLASS::: oracle.security.jps.JpsException
    com.siebel.analytics.etl.security.WalletFileUtils.getEncryptedCredential(WalletFileUtils.java:136)
    com.siebel.analytics.etl.security.WalletFileUtils.getCredential(WalletFileUtils.java:145)
    com.siebel.analytics.etl.security.WalletFileUtils.getServerRepCredentials(WalletFileUtils.java:294)
    com.siebel.etl.bootup.ApplicationManager.loadDBCredentials(ApplicationManager.java:102)
    com.siebel.etl.bootup.ApplicationManager.initSysProps(ApplicationManager.java:82)
    com.siebel.etl.bootup.ApplicationManager.getInstance(ApplicationManager.java:189)
    com.siebel.etl.bootup.ApplicationManager.getInstance(ApplicationManager.java:199)
    com.siebel.etl.bootup.ApplicationManager.lookup(ApplicationManager.java:269)
    com.siebel.etl.net.QServer.setSpill(QServer.java:213)
    com.siebel.etl.net.QServer.<init>(QServer.java:105)
    com.siebel.etl.net.QServer.main(QServer.java:499)

    RM， thanks !
    I have try to use the serverSetupPrompt.sh set the db credentials , but I think the key length I input is not enough then failed , when use the client it prompt the key length issue so it make the db credentials setting up correct!

Maybe you are looking for

  • Push notifications not working in ios 7 on iphone 5

    Since upgrading to ios 7 on my iphone 5 push notifications are not working, specifically for mail, mailbox, whatsapp and messages. I have checked all settings multiple times, hard reset and restored from back up a number of times with no results. I s

  • How to delete Duplicate records in IT2006

    Dear Experts We have a situation like where we have duplicate records with same start and end dates in IT2006. This is because of the incorrect configuration which we have corrected now, but we need to do  a clean-up for the existing duplicate record

  • I need BW 7.0 doc where can i find can u help

    what are the main differences between 3.5 and 7.0

  • Satellite C850-1KN - Windows 8.1 Freeze

    Hi, I have tried the search function but cannot find the help I require. My Satellite C850-1KN (windows 8.1) has been freezing a lot recently but I am still able to use the mouse pointer, CTRL + ALT + DEL has no effect and the computer won't do anyth

  • How to delete a page?

    Easy to add one to Homescreen... but where do you delete one ?