I Can't start web-based EM (Oracle 10g)

Hi, I've been installed Oracle 10G and when I try to start web-based EM with http://servername:5500/em I obtain the message "The page cannot be displayed" why happend it??

run /.emctl from the command prompt located in /opt/oracle/product/10.1.0/Db_1/bin..it will start your OEM.

Similar Messages

Cannot start Web Cache in Oracle 10g App Server

Hi,
Our Application runs on Oracle10g App Server,
When it tried to start WebCache using the command
opmnctl startproc ias-component=WebCache process-type=WebCache
it shows the error...
opmn id=oracle10g:6200
no enabled components for this request
When i tried to enable WebCache using Enable/Disable Component in Oracle 10g Enterprise manager - I can't see WebCache component it to enabe or disable it.
When i tried opmnctl status., it shows
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
HTTP_Server | HTTP_Server | 7276 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 7684 | Alive
OC4J | rhs | N/A | Down
OC4J | instaremit | 5880 | Alive
OC4J | insta_test_apr_02 | 7100 | Alive
WebCache is not running, also as the WebCache is not listed in Oracle 10g Enterprise manager, i can' enable or disable it.
Plz Help me over this.,
Regards.,
Deepak.C

Hi.,
Thanks again !!!
Yes, My Oracle HTTP Server is listening on port 80.
I am not clear, may i know why should the ports be changed for the request to go through Web Cache ???
Can i assign port 80 for Web Cache and 7778 for HTTP Server ?
Also In Oracle Enterprise Manager, Web Cache is not available...
home, HTTP Server, management alll these are there...
Also for HTTP Server, it's not showing any metric info, 'Not Yet Available' is shown even though the HTTP Server is running, how can i get metric info about Oracle HTTP Server, i have also used dmstool -t ohs_server, its not working
It's showing... FLEXMON ERROR : detected invalid table name ohs_server
dmstool -l -t also does'nt lists ohs_server
Hellp me over this.....
Deepak.C

How Can I install Web Service on Oracle 11g r1?

How Can I install Web Service on Oracle 11g r1?

Hi,
Is necesary install XDB?
Because i have executed;
select * from dba_registry
where COMP_ID = 'XDB'
Oracle XML Database
Regards

Can't start the runInstaller for Oracle 8.1.7 on Red Hat 7.2 Linux

I can't start the runInstaller for Oracle 8.1.7 under Red Hat Linux 7.2 (enigma).
Please Help Me!

I have the same problem as you had,but my one is that after typing ./runInstaller it will terminate, when you run ps -ef | grep oracle , there are still some backend process running over there.
Does any one has experience to install Oracle8i on Linux? Pleae give us help.
Jeff

Can't export web based 'sent' mail out of Network Solutions server

can't export web based 'sent' mail out of Network Solutions. Inbox and mozilla based sent mail ok. thanks!

How about asking Network Solutions?

Can't start web services in OSX Server 10.3

I used the GUI to turn on webDAV on one of my domains and now I can't even start web services.
For some reason, all of my domains now have multiple alias mappings, redirects, alias matches and redirect matches.
I have tried to delete the additional mappings from my domains, but everytime I hit save, they rewrite themselves. I deleted the domain in which I activated webDAV and recreated it and the mappings still rewrite themselves.
Any suggestions as to how to stop the automatic writing of the mappings and get my web services up and running again?
This is the last error in the httpd error log:
[Wed Mar 22 18:14:17 2006] [notice] SIGUSR1 received. Doing graceful restart

Here is the info from the apache config test:
Processing config directory: /etc/httpd/sites/*.conf
Processing config file: /etc/httpd/sites/0000127.0.0.1_80macintosh.local.conf
Processing config file: /etc/httpd/sites/0001216.170.182.82_80www.volbusiness.com.conf
Syntax error on line 36 of /etc/httpd/sites/0001216.170.182.82_80www.volbusiness.com.conf:
Redirect to non-URL
From the error log:
[Sat Mar 18 04:31:21 2006] [notice] Apache/1.3.33 (Darwin) PHP/4.3.11 mod_perl/1.26 configured -- resuming normal operations
[Sat Mar 18 04:31:21 2006] [notice] Accept mutex: flock (Default: flock)
[Sat Mar 18 04:45:05 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/x-plane/
airports/cyyzoverhead.jpg
[Sat Mar 18 04:45:05 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/error.ht
ml
[Sat Mar 18 04:45:20 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/robots.txt
[Sat Mar 18 04:45:24 2006] [error] [client 151.44.166.127] File does not exist: /Library/WebServer/Documents/masterfritts/favicon.
ico
[Sat Mar 18 04:45:24 2006] [error] [client 151.44.166.127] File does not exist: /Library/WebServer/Documents/masterfritts/error.ht
ml
[Sat Mar 18 04:45:27 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/favicon.
ico
[Sat Mar 18 04:45:27 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/error.ht
ml
[Sat Mar 18 04:45:31 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/favicon.
ico
[Sat Mar 18 04:45:31 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/error.ht
ml
[Sat Mar 18 04:45:58 2006] [error] [client 151.44.166.127] File does not exist: /Library/WebServer/Documents/masterfritts/favicon.
ico
[Sat Mar 18 04:45:58 2006] [error] [client 151.44.166.127] File does not exist: /Library/WebServer/Documents/masterfritts/error.ht
ml
[Sat Mar 18 04:47:57 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/robots.t
xt
[Sat Mar 18 04:47:57 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/error.ht
ml
[Sat Mar 18 04:57:55 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/ultrabou
vi.jpg
[Sat Mar 18 04:57:55 2006] [error] [client 216.170.182.82] File does not exist: /Library/WebServer/Documents/masterfritts/error.ht
ml
[Sat Mar 18 05:14:38 2006] [error] [client 202.160.180.194] File does not exist: /Library/WebServer/Documents/masterfritts/robots.
txt
[Sat Mar 18 05:14:38 2006] [error] [client 202.160.180.194] File does not exist: /Library/WebServer/Documents/masterfritts/error.h
tml
[Sat Mar 18 05:18:57 2006] [error] [client 66.249.65.230] File does not exist: /Library/WebServer/Documents/masterfritts/robots.tx
t
[Sat Mar 18 05:18:57 2006] [error] [client 66.249.65.230] File does not exist: /Library/WebServer/Documents/masterfritts/error.htm

Can't start managed server in Oracle Service Bus 10gR3

Using Windows 2003 Enterprise.
Standard install of OSB 10gR3 - only changes from standard are that I also installed the samples, otherwise, it's default install the whole way.
My windows machine name is the same as a name entry in the HOSTS file, as follows
127.0.0.1 localhost
xxx.xxx.xxx.xxx osb-strat
yyy.yyy.yyy.yyy osb-other
I eventually want to setup a domain across 2 machines with 2 servers, one on each, hence the two entries.
For the life of me, I cannot start a managed server for OSB, I keep seeing
####<Feb 27, 2009 10:54:11 PM CST> <Critical> <WebLogicServer> <osb-strat> <Strategic> <Main Thread> <<WLS Kernel>> <> <> <1235737451969> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
 at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
 at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
 at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
 at weblogic.security.SecurityService.start(SecurityService.java:141)
 at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
I did manage it once, but then I had problems seeing the second machines Node Manager - I have figured that out, but during my screwing around, I lost how to get the primary machines service to boot - I have not even attempted to boot the server on the second, remote machine!
I have tried creating the domain using the Config wizard and creating the server/machine using the config wizard.
I have tried creating an empty domain using the Config wizard then using the Admin Console to create the machine and server.
I have tried editing the boot.properties in C:\bea\user_projects\domains\TheDomain\servers\Strategic\data\nodemanager
I have tried setting the listening address to the Hostname of the server, blank, to the IP address.
I have tried configuring the service to not do host name validation.
I do see, in the startup logs, that it notes that the hostname resolves to both the external IP and 127.0.0.1
I have tried re-installing (multiple times) hoping to have a fresh start.
I have even setup a Snapshot, post installation so I can re-start configuration from the very start.
I am at my wits end.
Surely, it can't be that hard to setup a vanilla server and boot it?
Any suggestions, maybe even a step by step creation of a single server (other than the admin server for the domain), that boots, starting immediately after installation?
Any assistance would be greatly appreciated.
...Lyall

We also use a boot.properties in ${domain.home}, which may only be for Admin server, but worth checking anyway. Also, I often receive the boot.properties message you're seeing when there's other problems upstream, and I've found the message to be quite misleading at times. For example, if I have a problem with an LDAPAuthenticator or any other security mechanism I'll often see the boot.properties message eventhough the problem has nothing to do with that file.

How can I enable Enterprise Manager in Oracle 10g?

Hi,
We recently installed Oracle 10g on a MS Window server and after the installation which we created 2 instances each with a default schema from an existing data file (.dmp). After the installation, I realized that somehow, the DBConsole entry is missing in the Windows Services which then prevent me from being able to launch the new browser-based EM.
We thought we have picked all the components during the installation but for some reasons, it seems like the necessary files or configurations for EM was not there. So I was wondering if anyone know how I can manually install and configure EM?
Initially I thought if I go thru Oracle Universal installer and re-install everything again, it might help but I am concern that it will then wipe out the 2 instances and schemas that we have already created, especially since I have also applied the 10.2.0.3 patch already. So there was some discussions on calling the emctl program which when I tried, it I got error saying that ORACLE_SID not found. Then there was also some documentation on using the EMCA command to build the dbconsole, is that what I should do?
Lastly, I was under the impression that one will only setup one EM per server, which means in a perfect world, I will have one instance of the EM which will then allow me to manage the multiple instances (and their schemas) from the same console, is that correct? Or is one EM instance only manages one instance of the database? So if I have TESTDV & TESTUT configured on the same server, I will need to also create two EM consoles?
I am an amature and am more familiar with Oracle 9i which the EM seemed to be easier to use and setup. So I think I must have skipped or missed some steps during my 10g installation but am concerned that if I reinstall, I will lose everything.
Thank you very much.

First of all, thank you as always for taking the time...
I apologize in advance if I am not using the right terminology. Basically, I have only one Oracle Home directory on that server but I am able to create two different instances and in both cases, I have left the port number to be the same thinking that it's only one physical installation. I thought I would attach my TNSNAME and LISTNER ora files below to give you a better picture of my current setup.
So for me to connect to the database and the appropriate instance for example, like using SQL Developer, all I have to do is specify the Host Name to DBServer and then the Service Name to either TESTDV or TESTUT. Then I can connect to each of the instance directly.
But I only have one Oracle_Home directory and use the same port number as the default choice. So to your comment, if I only have one Oracle_HOME and one Port number, should I only install one EM instance?
Thanks much.
******In the TNSNAMES.ORA file:*****
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
TESTDV =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = DBSERVER)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = TESTDV)
TESTUT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = DBSERVER)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = TESTUT)
*****In the LISTNER.ORA file:*****
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_NAME = TESTDV)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = TESTDV)
(SID_DESC =
(GLOBAL_NAME = TESTUT)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = TESTUT)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = DBSERVER)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
)

Deploying a J2EE web application in Oracle 10g

Hi friends,
 
I had worked with Oracle9i 9.0.3 . But it's my first experience with Oracle 10g . I have installed Oracle 10g Infrastructure , Metadata Repository and one Middle tier - Forms and i hope i have followed The Oracle 10g installation guide Properly. Anyway installation is successful.
The problem is a J2EE web application which is deployed properly on Oracle9i 9.0.3 doesn't get deployed in Oracle 10g. The following is the exception :
 
Deployment failed: Nested exception
Root Cause: deploy failed!: ; nested exception is:
oracle.oc4j.admin.internal.DeployerException: Error initializing ejb-module; Exception Error in application Spom_Apps: Error loading package at file:/C:/Oracle/Ora9iASForms/j2ee/home/applications/Spom_Apps/JmsSubscriberMdb.jar, Error deploying file:/C:/Oracle/Ora9iASForms/j2ee/home/applications/Spom_Apps/JmsSubscriberMdb.jar homes: No location set for Topic resource MessageDrivenBean JmsReceiverMdb
 
 
where JmsReceiverMdb is the deployment file containing the message driven beans.
 
Thanks in advance,
paskal

Hi,
Thanks for responding . I am sending the file contents of ejb-jar.xml, orion-ejb-jar.xml, jms.xml.
Could you also check whether dtds versions of 10g and 9i in these xmls are conflicting? If you can specify your email-id i can send these file as attachments.
Hope you could strike the right spot.
ejb-jar.xml
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN" "http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<enterprise-beans>
<session>
<description>Session Bean ( Stateless )</description>
<display-name>spomPmConfigSSB</display-name>
<ejb-name>spomPmConfigSSB</ejb-name>
<home>jnipackage.spomPmConfigSSBHome</home>
<remote>jnipackage.spomPmConfigSSB</remote>
<ejb-class>jnipackage.impl.spomPmConfigSSBBean</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
</session>
<message-driven>
<description>Message Driven Bean</description>
<display-name>JmsReceiverMdb</display-name>
<ejb-name>JmsReceiverMdb</ejb-name>
<ejb-class>jnipackage.impl.JmsReceiverMdbBean</ejb-class>
<transaction-type>Container</transaction-type>
<acknowledge-mode>Auto-acknowledge</acknowledge-mode>
<resource-ref>
<res-ref-name>jms/alarmTopicConnectionFactory</res-ref-name>
<res-type>javax.jms.TopicConnectionFactory</res-type>
<res-auth>Container</res-auth>
<res-sharing-scope>Shareable</res-sharing-scope>
</resource-ref>
<resource-env-ref>
<resource-env-ref-name>jms/alarmTopic</resource-env-ref-name>
<resource-env-ref-type>javax.jms.Topic</resource-env-ref-type>
</resource-env-ref>
</message-driven>
</enterprise-beans>
<assembly-descriptor>
<container-transaction>
<method>
<ejb-name>JmsReceiverMdb</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
<container-transaction>
<method>
<ejb-name>spomPmConfigSSB</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Supports</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
Orion-ejb-jar.xml
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE orion-ejb-jar PUBLIC "-//Evermind//DTD Enterprise JavaBeans 1.1 runtime//EN" "http://xmlns.oracle.com/ias/dtds/orion-ejb-jar.dtd">
<orion-ejb-jar>
<enterprise-beans>
<message-driven-deployment name="JmsReceiverMdb" max-instances="100" min-instances="0">
<resource-ref-mapping name="jms/alarmTopicConnectionFactory"/>
</message-driven-deployment>
<session-deployment name="spomPmConfigSSB"/>
</enterprise-beans>
<assembly-descriptor>
<default-method-access>
<security-role-mapping impliesAll="true" name="<default-ejb-caller-role>"/>
</default-method-access>
</assembly-descriptor>
</orion-ejb-jar>
jms.xml
<?xml version="1.0" standalone='yes'?>
<!DOCTYPE jms-server PUBLIC "OC4J JMS server" "http://xmlns.oracle.com/ias/dtds/jms-server-9_04.dtd">
<jms-server port="9127">

<queue name="Demo Queue" location="jms/demoQueue">
<description>A dummy queue</description>
</queue>

<topic name="Demo Topic" location="jms/demoTopic">
<description>A dummy topic</description>
</topic>

<topic name="AlarmQueue" location="jms/alarmTopic">
<description>A topic</description>
</topic>
<topic name="FaultTextQueue" location="jms/faultTextTopic">
<description>A topic</description>
</topic>
<topic name="FaultTopologyQueue" location="jms/faultTopologyTopic">
<description>A topic</description>
</topic>

<log>
<file path="../log/jms.log"/>

</log>
<queue name="jms/OracleSyndicateQueue" location="jms/OracleSyndicateQueue">
<description>Oracle Syndication Services Queue</description>
</queue>

<queue-connection-factory location="jms/OracleSyndicateQueueConnectionFactory"/>
<queue name="jms/OracleUddiReplicationQueue"
location="jms/OracleUddiReplicationQueue">
<description>Queue for replication scheduler</description>
</queue>

<queue-connection-factory location="jms/OracleUddiReplicationQueueConnectionFactory"/>
<queue name="jms/OracleWebClippingQueue"
location="jms/OracleWebClippingQueue">
<description>Queue for Web Clipping</description>
</queue>

<queue-connection-factory location="jms/OracleWebClippingQueueConnectionFactory"/>
</jms-server>

Start listner by install oracle 10g faild

hi
by install oracle 10g can not start the lisner
error :
LSNRCTL> start
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST="my host name.domain.com")(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC0)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
LSNRCTL>

user12065379 wrote:
do have idea what can be wrong , ineed solution quicklyIf you need a solution quickly, you should open a sev-1 ticket with oracle support. This forum is NOT oracle support, it is only a platform supplied by oracle for peer user support.
Did you read and heed the installation guide? Especially the part about networking considerations at http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#BABIAEEC

Error deploying Web Service in Oracle 10g AS (10.1.3.0)

When deploying a secured web service from Oracle EM 10.1.3 i'm getting the following exception
"Failed in uploading archive. Invalid archive file: Invalid value: AES-256"
The same web service (.ear) file is getting uploaded without exception when deploying directly from Oracle JDeveloper 10.1.3.0

The problem solved when creating a webservice ear file with the keystore generated in the machine where the application server is installed.
We created a secure web service (in client machineA) with public/private key encryption (AES 256) and tried deploying it in an application server instance (Server machineA). Doing this gives the following expection (when deploying the ear file through EM)
"Failed in uploading archive. Invalid archive file: Invalid value: AES-256"
We solved the problem by creating a keystore file in the application server instance machine (instead of doing it in client machine) and used the same keystore file to create the ear file which got deployed succesfully.
Thanks for your help

Web access of oracle 10g (10.1.2.0.0) Application

Hi,
I've migrated my application from Tomcat and JBoss to Oracle 10g (10.1.2.0.0).
I am able to access my application by url
http://localhost:7200/index.jsp or http://127.0.0.1:7200/index.jsp.
But when I am trying to access my application by giving m/c name or m/c ip address insted of localhost in the above url, i am not getting access to the application.
Do I need to configure any where for remote access of my web application?
Thanks
Bhogi

I got the fix for the issue posted by me few days back.
In Oracle 10g AS, port 7200 is diagnosis port, which will only work for localhost or 127.0.0.1.
The application is accessable on the configured http port (default 7777)

Not able to start the listener in oracle 10g after the domain name changed

Hi
I had installed the oracle 10g on zLinux. It was working fine( was able to mount the database and start the listener). Now my server's domain name got changed. So i have added the new domain name in the tnsnames.ora and listeners.ora file . now i could able to mount the databases but am not able to start the listener . whille starting the listener , am getting the following error
oracle@ptcr4d00:~> lsnrctl start
LSNRCTL for Linux: Version 10.2.0.2.0 - Production on 05-AUG-2009 10:31:05
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /opt/oracle/10g/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.2.0 - Production
System parameter file is /opt/oracle/10g/network/admin/listener.ora
Log messages written to /opt/oracle/10g/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PTCR4D00)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 104: Connection reset by peer
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=PTCR4D00)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
I have posted the contents of the tnsnames.ora and listeners.ora
TNSNAMES.ORA
TC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PTCR4D00)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = TC)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
LISTENERS.ORA
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /opt/oracle/10g)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = PTCR4D00)(PORT = 1521))
Could you please help me to resolve this issue ?
Regards
Mani

Hi
Please find the content of the /etc/hosts below
# IP-Address Full-Qualified-Hostname Short-Hostname
#127.0.0.1 localhost
9.124.114.49 PTCR4D00
# special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix
ff02::1 ipv6-allnodes
ff02::2 ipv6-allrouters
ff02::3 ipv6-allhosts
9.124.114.49 PTCR4D00 PTCR4D00
Regards
Mani

Can I import a tablespace into Oracle 10g Express Edition

I am very new to Oracle 10g Express Edition. We have a server running Oracle Enterprise Edition and we have been creating a transportable tablespace to be imported into a few servers. This works fine for us. I would like to find out if I can import the tablespace into Oracle 10g Express Edition. Someone told me that I should be able to do that but I have no clue to how to do it. If this is possible, can someone tell where to find the information how to do this.
Thanks,
RJ

I finally tried it and I got the following errors:
IMP-00017: following statement failed with ORACLE error 721:
"BEGIN sys.dbms_plugts.checkCompType('COMPATSG','10.2.0.2.0'); END;"
IMP-00003: ORACLE error 721 encountered
ORA-00721: changes by release 10.2.0.2.0 cannot be used by release 10.2.0.1.0
ORA-06512: at "SYS.DBMS_PLUGTS", line 2004
ORA-06512: at line 1
IMP-00000: Import terminated unsuccessfully
Am I right that the server that I exported the tablespace is using Oracle 10.2.0.2.0 while Oracle Express is 10.2.0.1.0? I looked around and I did not see Oracle Express version 10.2.0.2.0 that I can download. Is there a patch or something to upgrade it?
Thanks,
RJ

How can i recover or reset my oracle 10g user password?

Hi Scolars,
How can i reset or recover my oracle 10.2.0 database user password?
I have system or sys user password for the same database.
I want to just recover the user password only.
hlep me please..

Hello,
Just execute this:
alter user identified by <new_password>;Hope this help.
Best regards,
Jean-Valentin

I Can't start web-based EM (Oracle 10g)

Similar Messages

Maybe you are looking for