I can't sync my ipod classic (160gb) to iTunes 10,in Windows 7.

I reset my ipod classic (160 gb),I tried uninstalling and reinstalling the iTunes,reseting with the latest version of iTunes,but it still does not sync all of my songs.It says : Can't copy to apple's disk,Error -69
I have no idea what else to do. Your answer will be appreciated.

Please do the iPod disk Diagnostic as posted earlier by tt2, it wont fix your problem but helps in troubleshooting.

Similar Messages

  • How do I sync my Ipod Classic 160gb with my new computer (windows 8). It synced with my old computer (windows XP) but not with my new one (windows8)

    How do I sync my Ipod Classic 160gb with my new computer (Windows8).? It synced with my old computer (WindowsXP) but will not do so on the new computer?

    Hi Lechwe,
    I had this issue recently, due to changing HD for an SSD.
    In my case, since the library in my iPod was synced to the HD it was not syncing to the library in the SSD, though they were the same (had the same contents).
    I found there's this checkbox in iTunes > iPod > [Settings] Music, called "Sync Music". Mine was unchecked, I guess due to iPod being synced to the old library. I marked the checkbox and clicked then in Sync. iTunes asked me if I was sure I wanted to sync the iPod with the "new" library, i clicked yes, and the it started determining the song to sync. Since the library was essentially the same (just a couple songs more in the new one), it synced the couple new songs and that was it.
    Hope it helps!
    Regards,
    Awlo.

  • How can I sync my iPod classic to another iTunes library

    I need to sync my iPod classic to a new computer shared with my wife how can I sync my music to her library?

    Hello eddie8625,
    I would recommend enabling 'manual mode' on the iPod so that it can be synced to two libraries without affecting the existing content on the device.
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/HT1202
    If you'd like to use your iPod to transfer your music to the new system, the following article should be helpful.
    How to use your iPod to move your music to a new computer
    http://support.apple.com/kb/HT1329
    Cheers,
    Allen

  • How can I sync my ipod classic 4th gen to new itunes

    I updated iTunes and now I can't sync my ipod classic 4th gen.

    Start with this article: iPod: Appears in Windows but not in iTunes

  • I can't sync my iPod classic any longer to itunes on my iMac because it tells me I no longer have the priviledge to make changes? does anyone have a solution to this?

    I can no longer sync my iPod classic to my itunes on my iMac because I'm told I no longer have the priviledge to make changes? any ideas?

    Hello Zabagon,
    I was looking through our resources for information based on what you are describing here. I found an article that may just get you back up and running, called iTunes: Missing folder or incorrect permissions may prevent authorization found here http://support.apple.com/kb/TS1277.
    Symptoms
    With Mac OS X, the Shared folder is required to authorize your iTunes Store purchases. With Windows the iTunes folder is also required. If either of these folders are missing or have incorrect folder permissions, you may notice one of the following symptoms:
    You are unable to complete a purchase from the iTunes Store.
    You are told that you do not have permission to modify your iTunes Media folder when downloading from the iTunes Store.
    You cannot play content you purchased from the iTunes Store.
    An alert appears with the following text:"There was an error storing your authorization information on this computer. The required directory was not found or has a permission error."
    Resolution
    Collapse All | Expand All
    Mac OS X
    Log in to your computer using an administrator account.
    In the Finder, choose Go to Folder from the Go menu.
    Type: "/Users" (without quotes) and click Go.
    Take care,
    Sterling

  • I can't sync my iPod classic with iTunes 10 anymore. A notice comes "You don't have the adequate access rights to make modifications." What happend?

    I can't sync my iPod classic with iTunes 10 anymore. A notice comes "You don't have the adequate access rights to make modifications." What happend?

    bump

  • How can I sync my iPod classic with iTunes if I only have an iPad?

    How can I sync my iPod classic with iTunes if I only have an iPad?
    I recently downloaded music on my iPad via iTunes, but I can't get it to my iPod. Any help?

    You cannot. There is no iTunes application on an iPad and iPods cannot sync with an iPad.

  • My computer died and I had to buy another one.  Now I can't sync my ipod classic.  What is the deal with this?  I added songs about three months ago and it was fine.  Now it won't sync.  It says it has a duplicate file.

    My computer died and I had to buy another one.  Now I can't sync my ipod classic.  What is the deal with this?  I added songs about three months ago and it was fine.  Now it won't sync.  It says it can't sync because there is a duplicate file.

    There are server problems right now with iMessage effecting some users.  See http://www.apple.com/support/icloud/systemstatus/.

  • I can't sync my ipod classic

    I can't seem to sync my ipod classic to my itunes library.
    I have tried ao many times now & it shows that it is syncing but the new music is not transfering to my ipod.
    I even made sure that my itunes was the most current version & I reset my ipod.
    I have been trying for 2 days now, I have read & re-read the helps & am at a loss.
    If I can't figure it our now I will probably end up taking the ipod to the Apple store.

    Do you think you could provide a bit more info to work with?

  • How can I sync my IPOD Nano 4 to iTunes on my PC? I've already tried the sync button on iTunes and it says it is synced. I've also tried the 5 steps recommended by Apple to fix sync problems with no luck.

    How can I sync my ipod nano 4 to iTunes on my PC? I've tried the sync botton on iTunes and the 5 steps recommended by Apple to correct sync problems with no luck.

    How is your iPod configured to sync content from your iTunes library? Any error messages during the sync process? 
    You may want to reset warnings on the device by right->clicking on it under Devices and choosing Reset Warnings.  Then resync the iPod to see if any alerts appear.
    Is this the same computer you normally sync the Nano with?
    B-rock

  • My laptop died so I've installed itunes onto another PC and my music is all on an external hardive which is connected to the new PC. How can I sync my ipod with the new itunes and get all the music onto itunes?

    My laptop died so I've installed itunes onto another PC and my music is all on an external hardive which is connected to the new PC. How can I sync my ipod with the new itunes and get all the music onto itunes?

    You might consider itunes match for moving CDs you've copied into your itunes library if you dont have a way to use home sharing.
    iTunes match is an optional service offered by apple that costs about $25 a year.  It scans your music library and if it finds music that is already in apple's itunes catalog it'll automatically "unlock"/"store" these in the cloud for you.  Items that it does not find in the catalog it'll upload and store these in the cloud for you and you can download them on your devices.  See http://www.apple.com/itunes/itunes-match/

  • HT1351 Am having problems syncing iPod classic 160gb to iTunes within Windows 8. Can you help?

    I bought my iPod Classic 160GB from new in April 2012.  For several months, I ran it through an older HP laptop running Windows XP home edition (service pack 3 I think?).  I did however, use a Toshiba external hard drive to store all CDs/podcasts/photos etc.  All worked very well and I put a fair amount of music (via CDs and podcasts) on the iPod via iTunes.  All worked successfully.  I changed computer earlier this year - another HP laptop but now running Windows 8.  I've downloaded the up to date edition of iTunes AND have also transferred all existing material/files from the same Toshiba external hard drive to the iTunes in my new computer.  (think I did this correctly?)  So far, so good.  I have placed some more music on the external hard drive and into iTunes and wanted to sync with my iPod.  I connect iPod to the computer.  It's recognised in iTunes as the window comes up showing iPod's serial number and settings etc etc.  The iPod screen shows 'sync' and the top of screen in iTunes also shows 'syncing' however, after a few seconds, this stops and the iPod screen shows 'OK to disconnect' without having transferred any of the new music onto the iPod.  Although all the existing music remains on the iPod (the stuff that was there before), the copule of new CDs hasn't been transferred over.  Can anyone help me solve this problem?  I hear that there are some problems at the moment syncing iPods within Windows 8.  Anybody else had this problem?  Any suggestions would be appreciated.

    Hello hindzee,
    The acticle below goes over how to sync content to iPod Classics. The section titled "Syncing automatically" will most likely be the most helpful protion of that article for you.
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/ht1351
    Hope that helps,
    - Griff W.

  • Error -50 & -69 When trying to sync music Ipod Classic 160gb

    Hi everybody,
    I recently installed an x64 version of Windows 7 Ultimate. I have an Ipod Classic 160gb (late 2009), and i am trying to sync it to my itunes library. However, everytime i do so, it will copy across a few songs (a different number everytime, no more than 500 though) my Itunes freezes up (as well as the ipod). After a while, once it "comes back to life" i get either "Itunes cannot copy {Song Name} to {Ipod Name} Ipod. An unknown Error Occurred (-50)." or "Itunes cannot copy {Song Name} to {Ipod Name} Ipod. An unknown Error Occurred (-69)".
    Here is what i have tried:
    Enable Disc Use - No Luck
    Uninstall / Reinstall Itunes + Rebuild of Library - No Luck
    Uninstall Itunes, reinstall + Rebuild Library on Previous version (9.2) of Itunes - No Luck
    Kill APSDaemon.exe While synching - No Luck
    KIll all other Apple Services + Processes - No Luck
    Uninstall Antivirus - No Luck
    Reformat Ipod - No Luck
    Create a Virtual x32 environment of Windows 7, and recreate my library using the latest Itunes - No Luck
    Virtualize a Mac environment, and try on there - MAC OSX doesn't allow virtualization on a Windows "Base" (what a piece of ****) - SO, no luck
    Media Monkey Transfer - freezes up like a dead body, then just crashes.
    Manually transfer - Work sometimes, doesn't work otherimes. Seems to be Random.
    I know you are all going to say "oh, the song it get stuck on is corrupt". Well, it isn't. The song plays fine in Itunes if i go to investigate. When i go to my music "source" it is an actuall file, with an actual file size. I can also play it with VLC media player as well.
    Sync with my Dad's IMAC - Success. My Dad has 5.5gb of music (more than 500 songs). Although Ipod did get seem to get stuck on a couple of songs, it succesfully sync'ed
    Use Sharepod - Success (although, i have 2940 folders, and sharepod will only allow me to transfer one folder at a time) - So, No Luck
    I know the Ipod is fine because if i Sync via MAC or Sharepod, it will play music fine.Also, before the installation of the x64, it sync'd fine. It would be silly that an Ipod dies because i change my Windows Installation.
    Another thing, while in the act of Synching, the IPOD screen displays "Synchronising", then, it will just go to "Connected". On the MAC it stayed as "Synchronising" the entire time.
    Basically, i am at my wits end. I have tried everything i can think of.  I now have a very expensive paper weight, which is ******** me to tears.
    If anybody has any solutions, or ideas, i would love to hear them.
    Thanks,
    Lachlan

    You seem to have tried everything, and you say it's syncing fine on your Dad's iMac, so I assume, you have also  done a Disk Diagnostic from an earlier post by tt2 and conclude that your iPod Hardisk is good.
    You don't have to use it as a heavy paperweight, the problem is only using your Windows 7 machine for syncing.
    In your troubleshooting steps, did you try to use another High-Speed USB 2.0 port, USB controller resource are very scarce, so if you use other USB devices, while syncing your iPod, it may just freeze.
    Windows have a bad reputation for device conflict, so better don't connect other  USB devices, while syncing, better sync it while disconnected from Internet, stop antivirus just before you go to bed.
    Have a nice day!

  • HT3798 Itunes not syncing my ipod classic 160gb due to error code -50. How do I solve this problem?

    I have over 5000 songs in my ipod classic 160gb. My ipod software version is 1.1.2. The itunes version is 10.6.1.7
    Itunes cannot sync my music to my ipod. It only syncs about 301 songs and gives the error message -50, and cannot sync ipod. I have tried changing itunes version, restoring and even de-selecting some songs to no avail. I am so fraustrated; please help me.
    benaggreyfynn

    Doublechecking. Have you tried the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document?
    iTunes: Advanced iTunes Store troubleshooting

  • I can't sync my iPod after upgrading to iTunes 7 - Help!

    I'm running an Intel 20" iMac with all of the latest software updates applied.
    My iPod is a 30GB iPod Photo (4G) running software version 1.2.1.
    I upgraded to iTunes 7 last night. Since then, I can't sync my iPod. Here's what happened/happens...
    I installed iTunes 7. On first run (iPod disconnected) it checked for album art and ran through my library to determine the zero gap playback info. That all happened successfully.
    When I connect my iPod (which is set to auto update), it recognizes it, and show the status page (also shows up in "devices" in left pane) and immediately a small window pops up with the text "Updating library on 'Evan's iPod'". The progress bar gets to somewhere between 30-70% and then hangs.
    I left it running all night and it never finished. My only option was to Force Quit iTunes. Once I did, my iPod was still fine, and had all my music on it, just nothing new.
    I've tried rebooting my computer and iPod, to no avail.
    I would try reformatting my iPod, except that you can now (seemingly) only do that through iTunes (as opposed to a separate updater as in the past). Since iTunes locks up as soon as my iPod is connected, that doesn't help me much...
    Any advice would be greatly appreciated.
    Thanks,
    Evan
    Intel iMac 20"   Mac OS X (10.4.7)  

    Ok... I just tried connecting my iPod directly to a USB port on the computer rather than via the USB hub I was using and everything is fine. Odd, but I'm happy now.
    Thanks,
    Evan

Maybe you are looking for

  • Delete data from DSO only with a part of the key

    Hi experts, I have a DSO with 9 key fields and i want to delete some entrys. Our source system only provides 2 fields of the key. My problem is, that the BI is not able to delete from DSO unless I have the full key. Now I want to get the rest of the

  • Payment issue-3 Months Suscription

    Hi,  I have purchased a US number for 3 months subscription, and when I am recharging it is showing for 3 months plan costs 10Euros, and 400mins/month. My question is suppose I have finished my 400 mins within a week after purchasing, again to get 40

  • Technical issue with DW CS3

    I just installed Dreamweaver CS3 yesterday, and there seems to be a device conflict with my USB mouse. When DW has focus, I am unable to double-click, the mouse is VERY sluggish in response, and if I try to double-click, it gives me that annoying scr

  • How to use the kxml parser?

    I am getting problem in using the kxml parser.Actually my application is showing the java.lang.NoClassDefFoundError: org/kxml/parser/XmlParser error. Can you tell me how to use the kxml parser with our j2me application or what are the steps for this?

  • Oracle data integrator , reverse the tables

    Hi all, am new to odi. Is there any possibility of passing the table name as parameter to reverse it.. am facing issues in reversing the table ,as there large number of views and tables in a schema it takes long time to import. even i tried using sel