I can't take pictures on my phone b/c it says I have 10.1gb of photo library storage and 3.8kb of shared photo stream,I don't know what that means.My photo stream is off and I only have 500pics and its a 16gb phone,what can I do to my photostream?
Do the pictures on my old phone add on to my new phone on photostream?
Make a backup of your laptops hard drive to an external hard drive or a thumb drive.
Videos take up a lot of memory. One second of videos is like dozens of pictures. How much time, in total minutes & seconds, do all 22 of these videos add up to?
Similar Messages
-
I can't take pictures with my iphone
I can't take pictures with my iphone b/c it says I don't have enough storage. I only have 120 pics on the phone now. My settings show I have 14.6 GB available of a total 15 GB. Why can't I access it to take pics?
Have you tried a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
HT1657 When I try to play my rented movie I get an error 42110. Whats that mean?
When I try to play my rented movie I get an error 42110. Whats that mean?
Is this in iTunes, on an iPod/iPhone/iPad or AppleTV?
Not sure what the error number is.
If it's a portable device try restrating it by power cycling, if a computer reboot it and restrat iTunes - this may or may not work but cure an authorisation problem I had in itunes the other day.
Good luck. -
I have iPhoto 11, version 9.4.1 installed. When my library upgraded, I got a message that the photos couldn't be inported and I need to repair iPhoto permissions. How do I do that? My photos are there, but I can no oonger drag them to the photo stream.
Disable Photo Stream in iPhoto's preferences and then go back and reenable it. See if that will jump start the process. If that doesn't help try this: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto check its preferences to meka sure all is as you expect and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT -
I can not take pictures or even back my phone up due to error message not enough storage I have went into manage storage and turned all my apps to off and I still get error. I also have deleted a ton of pictures and apps.
Hi there mistib,
You may find the information in the article below helpful.
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
-Griff W. -
I purchased extra Icloud storage because I couldn't take any more pictures on my phone, or download any more apps. The extra storage purchase did not change a thing. I still can't take pictures or download apps. Help!!
Icloud storage has nothing at all to do with the storage on your iphone.
Icoud storage is on a server somwewhere, not on your iphone.
You need to delete content from your iphone -
I have iphone 4 . I don't know how that happenned that the normal color on screen and all icons changed ( for example , normally green color phone icon became purple color ,) and photo pictures turned negative appearance ( ghost-like ) . Any idea how to fix this mishap ? Your help will be appreciated.
Hi kshieh
You can try two possible steps:-
1]Triple click the home button. You should get an accessibility menu.deselect the negative/black and white option.
2]Go to settings->General->accessibility->and deselect invert colours.
That should fix it
Rithwik -
How can I take pictures from my Iphone and upload them in my computer ?
How can I take pictures from my Iphone and upload them in my computer ?
iOS: Importing personal photos and videos from iOS devices to your computer
-
Can i take picture and send the picture to server in virtual mobile
As the title,can i take picture and send the picture to server by using mobile api such as java mobile media API,or person java or others?
if it can,can u tell me which API use?Hi ericg77,
Please see my answer in your similar post: Protected files
Best,
Sara -
After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.
Hi Midnightbrat,
Welcome to the Support Communities!
The troubleshooting steps for the camera on the iPad are similar to the iPhone: I've highlighted the pertinent steps below:
Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash; try removing the case if you have image-quality issues with photos.
Try turning the iPad off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try switching between the front and the back cameras to verify if the issue persists on both.
I hope this information helps ....
Have a great day!
- Judy -
HT201318 I have downloaded the 10gb, but I can't take pictures
I have downloaded the 10gb, but I still can't take pictures?? How can I get back to taking pictures?
What do you mean, 'downloaded'? Take pictures where? Are you saying that you have an iPhone or iPad and you don't have enough memory for any more pictures? Adding the 10GB won't have any effect - it's extra space on the iCloud server for Documents, email, Contacts, Calendars and iPhone backup. You can't increase the memory on an iPad or iPhone by any means. If this isn't your issue please clarify what you mean.
-
My imac is doing strange things:
-delaying between users: when closing session it goes to blue, then takes a while to appear users signin box, and then wont recognize mouse command to enter until a couple of minutes later... then everything seems alright until....
-it gets stuck between things, the rainbow wheel appears and its just delays there forever....
-and every now and then the mouse starts flickering and bouncing wildly onscreen.
I ran the appel hardware test and it detected an error:
4MOT/4/40000003:HDD-1233
Does anybody know what that means? HELP!WZZZ answered about where to get iStat. And do check the SMART status. If it is an overheating problem due to a fan or logic board problem, your hard drive is possibly cooking itself to death. If so it isn't a faulty hard drive even though the hard drive might fail. So assuming it's a temperature problem, even if you are able to repair things on the disk with software, that is working on symptoms, not causes. I could be wrong however.
RE: AppleCare: Your iMac came with one year of AppleCare (Apple's warranty program), but within the first year you can buy 2 more years. You have to extend by the one year anniversary of purchase of the computer. Your 10,1 is too old to still be in the first year, and since you asked what it was, I'm sure you don't have it. Bottom line meaning is that whatever this problem turns out to be, you'll have to pay for it. Unless there is something like this. It is for 2011 iMacs with certain Seagate drives. You can put in your serial number for fun, but it looks like yours is too old. Lastly, some people have had Apple help them anyway if it is just out of warranty, but many have not. Your machine is one of these. Type in 10,1 in the search box. Is there an Apple Store near you? Just b/c it's out of warranty doesn't mean you shouldn't have it looked at by Apple. But no one here can say at all what Apple will or will not do.
Hope you get it taken care of! -
When i called *611 to check my order statud for my 6+ it said 'revieved and activated'
Can anyone tell me what that means?Hello ElAnBr10! So sorry for any confusion over your order status. I would take that comment ("received and activated") to mean exactly as it sounds: The device was shipped, received and activated. In order to confirm that, I propose we take a detailed review. I've sent you a direct message as a follow up to your post. Please reply there!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport -
How can I take pictures of my screen?
How can I take pictures of my screen and then save it?
I need help.
Thankyou.You mean take a screencapture?
Here are some useful keyboard shorcuts:
Screen Capture to disk:
command Shift Key 3 Screen to jpeg file on desktop
command Shift Key 4 + Drag: Selection to jpeg file on desktop
command Shift Key 4 + Spacebar: Window (click camera) to jpeg file
There is also SnapNDrag Pro, it was free yesterday on App Store.
Hope this helps, -
Can't take pictures with Image Capture - Canon Camera
I can't take pictures using Image Capture using either my Canon Power Shot A710IS or my husband's SD600. I can download pictures with both cameras, but if I switch to shooting mode, Image Capture says "No Image Capture Device Connected." I know it worked with my PowerShot A75, but my *&%$ son broke it.
Any help would be greatly appreciated!
KarenI would call (800) 828-4040 Canon Tech Support. I have found them very helpful, and its easier than typing here
Maybe you are looking for
-
Mini player does not work, can only switch playlists by closing and restarting iTunes
For the last few versions of iTunes, my mini player does not work, only choices are large window and larger window. Also, if I am listening to a playlist and hit the pause button, then switch to another playlist, the old playlist keeps playing when
-
After trying to delete the .plist I realised my iTunes had become corrupted and needed to be reinstalled. This may not be a fix for everyone, but here is how I uninstalled and reinstalled. iTunes comes preinstalled as part of OS X, and is considered
-
How do I add a copper layer?
I exported a circuit from Multisim to Ultiboard. I want it to be a two layer board, but the copper top layer is missing from the design. The last board design I made using Ultiboard was a single layer and the problems seem to stem from that. Anyon
-
BAPI for changing BP communication data
Hi, I am trying to change BP Communication data using FM BAPI_BUPA_ADDRESS_CHANGE but it is changing "Address-Independent" data only and not the normal communications data. Which FM should I use ? Or are there any specific parameters which I need to
-
Hi, I would like to Consume a Web Service through WD, The return type of the service is Vector and I would like to display result in Table so I have to bind this return type to Table UI. I have tried to make a Web Service model and mapped it to Co