I can't turn on my ipad 3rd gen after upgrading to ios 7.0.2

my ipad 3rd gen run good using ios 6.XX then last sept i just found an update from my ipad and tries to update with good connection of internet. after upgrading it restarts and a few minutes of using with FB it reboot it self and i can't even turn-it-on, the following day i tried to turn it on but i experince a blue blinking screen for 20 to 30seconds then shut it self. i was scared so i haven't done anything to my ipad. i went to an authorized service provider "Power Mac" @ Festival Mall Alabang Muntinlupa City, Philippines to see if they can do anything about my ipad. but then, after 2-3days of wait thing, the service provider email me that the problem is on display hardware. they are not authorized to open a non-screw unit of an apple so they emailed me that is stated below. i try to set an apointmet call from apple singapore support/customer service but the day and time passed-by apple singapore doesn't call.. why do i have to pay for the said amount if i haven't done wrong to my unit? is it a customer's fault that i found and try its' recomendation to upgrade its' ios?
PHYSICAL INSPECTION
-‐rough edge of the unit
-‐scratches on some area
-‐with screen protector
TROUBLESHOOTING / OBSERVATION
checked iPad
-no power when received the unit
-charge it using known good usb cable and power adapter to D.C
-encountered auto shutdown
-DFU and proceed for restoration
failed to restored encountered unknown error (9) blue screen also encountered while
processing the restoration
-flickering display also encountered
-display issue
REMARKS/RECOMMENDATIONS
-‐display issue
(hardware failure)
-‐eligible for aep
TOT. PARTS ₱18,460.00
PLEASE HELP ME TO SOLVE THIS ISSUE... I CAN'T AFFORD TO PAY FOR THIS AMOUNT.

Following ultimately helped me : Make sure that you are logged in at the App Store App or iTunes App with your apple ID and password with a US account. Turn your iPad off and on and than you should see the Radio button again. It won't work if you are logged on with a foreign account. If you are not logged in at all, it worked, too.

Similar Messages

  • Stuck on Boot 3rd Gen after upgrade to ios 8.1 via itunes following init

    Yesterday the latest update was applied and the initialization questions completed.
    The device rebooted and now it does not get past the apple logo.
    If the power and home button are held down together it turns off. If the power button is pressed it displays the apple logo.
    There is no other functionality.
    Is there a way to fix this or does it need to be reset, or restored from backup?
    The ipad was too full for a normal update but itunes thought it had enough space to upgrade.
    It went through the initial init screens just fine after the upgrade. It was only after it went to reboot following this that there was a problem..
    This iPad has Verizon service on a shared account. The sim card is not the one it  shipped with.
    It is 3rd Gen retina display 64gb wifi / 4G wireless
    You would think there would be a community per model and a discussion about upgrades.
    But alas no.

    I hope you have a backup for the device because you will need to restore the device. To put your device into recovery mode plug the device into your computer with iTunes then press and hold the home button and the sleep/wake button. The unit will power off and turn back on, right before the Apple logo appears release the sleep/wake button and the iPad should show the iTunes logo. In iTunes open your device and press the restore button. When the iPad finishes reinstalling iOS, select your latest backup either from iTunes or on the device through iCloud backup and your device should be good to go.

  • ICloud not working on iPad 4 Gen after upgrade

    iCloud is not working on my iPad 4 gen after upgrade to iOS 8.  I have Yosemite beta and iCloud works on my iPhone, windows 8 and of course my mac with beta Yosemite.  Does anyone else have a similar issue.

    Reset iPad and the problem cleared up for now.

  • What happened to my ipad weather app after upgrading to ios 7?

    What happened to my ipad weather app after upgrading to ios 7?

    If you are talking a built-in Weather app then that has never been included in iOS on iPads. If you mean a weather app that you downloaded from the store then which app is it ?

  • Can't update firmware on iPad 3rd Gen (GSM) 6.0.1

    I received an iPad 3rd gen (gsm) for my birthday from my sister in law, who works at Apple (this will come into play). The firmware is 6.0.1 and I am unable to update to the latest firmware. I have tried using iTunes and OTA and i get the generic error "Not eligible for this build." (device is not jailbroken)
    I have used four different cables and three different computers (the ota issue kind of makes this a redundant check but I tried just to be safe)
    I have deleted and redownloaded the firmware via Apple/iTunes and even finding the update and trying to manually update or restore via the ispw file.
    I have also tried the hosts file method (adding a # before the apple line and also deleting the line completely and every other combination of adding lines and such).
    I am able to restore on the device itself and that does not change my outcome when I try to update. What I think might be the issue (that I found out today) is that the iPad used to have a "Development" sticker on it. When I try to enter in the serial number into the support page it says the serial number does not exist. I have no idea where to go from here.
    Any suggestions? (unfortunately I live an hour and half from an apple store and I'd like to try and fix it myself first)

    She has no idea on what to do as she isnt a developer (I'm not going to disclose her exact position).
    I've tried to reset the content and settings and it restores it to factory default but it unfortunately still gives me the error. I'm going to try and install a beta version of ios 8 (thats still signed by apple) and see if that may work.
    I'm debating on bring it into the apple store or not as that may be my only option.

  • Music albums purchased in March are no longer in my iPad and iPod after upgrading to iOS 7 why?

    After upgrading to iOS 7 all the music albums purchased in March are no longer in the iPad or the iPod although in the iTunes Store are shown as purchased. How I can get them back?

    Your original post:
    I upgraded an iPad 2 to iOS 7 and since then SIRI no longer works when pressing the HOME button.  The settings for SIRI has also disappeared in the GENERAL settings.  I have searched and found no posts with this issue!
    iPad 2, iOS 7
    You're most recent post:
    fldaze wrote:
    I have the iPad 3 and believe me it had Siri before the upgrade!
    Perhaps it might help if you posted your model number as it seems unclear which iPad you actually have. Settings>General>About
    Best of luck.

  • I can't turn on my Mac Book Air after upgrade the Lion software. Please, can you help me?

    I bought a Mac Book Air 3 month ago. I upgrade Lion software several hours ago. Later I reboot and I left to work. When I arrive, I can't turn on my MAC. Only light up the capital letter light, all the other parts are
    dead o seem to be. Can you tell me what I have to do to solve the problem, please?

    We can't, but Apple can, contact customer service, have your serial number ready and for a small fee Apple will send you a replacement.
    If you're in a hurry, go to the Apple Store and purchase a copy of OSX ($29 in the US)

  • Bluetooth keyboard mapping issues with iPad (3rd gen) after iOS 6.1.2 upgrade

    Others may have figured this out more readily than I did, but since I did not find a post on this topic, I decided I would provide this information.
    After upgrading my iPad "3" to iOS 6.1.2, my bluetooth keyboard mapping was a bit off.  Hitting most keys provided the desired result but not all.
    Typing \ would result in ] for example.  Typing shift + 2 would result in " rather than the expected (and marked) @. 
    To fix this I tried turning Bluetooth off and on, etc.  No joy.
    FinaIly, I went into "Settings," selected "Bluetooth," selected "Apple Wireless Keyboard," clicked on "Forget this Device."  
    I then powered off the iPad and the bluetooth keyboard.  Next, I powered on the iPad and keyboard and went back into "Settings" where I paired the keyboard with the iPad again.  Everything then worked as desired. 
    It's possible, that you may not need to go to the trouble of powering off and on the iPad and the keyboard.  Simply "forgetting" the device and then pairing the keyboard with the iPad again may suffice.  

    Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon.  The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
    Use the wall-mount charger that came with the iPad and charge overnight.  Admittedly the labeling is hard to read but, if you use a magnifier and squint your eyes, you'll see "Output 5.1V, 2.1A."  The symbol between volts and amps is the symbol for DC.  Do NOT use an iPhone charger.  Do NOT use an iPod charger.  Do NOT use a computer's USB port.  Then, operate it normally until auto shut-down (ignore any low level alerts that may appear).  An irony is that doing that test to determine the total operating time is also the exact procedure necessary to calibrate the battery level meter.
    I'm not claiming that you do not have a problem.  I am stating, however, that we don't yet know whether or not a battery problem exists.
    According to Apple:
    Use Your iPad Regularly
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

  • HT204023 Hi, my ipad 3rd gen is running on ios 5.1.1 ,but i cant find personal hotspot feature. Do i need to upgrade to ios 6 to have personal hotspot feature.

    Hi,
    I live in indonesia, recently i notice in my friend ipad3 whic running ios 6.1.2 they have a personal hotspot feature. Since then i ve benn searching that feature in my ipad 3 which runnning on ios 5
    Im willing to upgrade to ios 6 if thats the problem however seeing there is many issues with ios6, i want to make sure that the problem is with the ios and not the carrier.
    Thank you for the answer

    I'm using other gadget and wifi tethering works (hotspot)fine.
    Already consult with cellular provider and they confirmed that the problem might be on device.
    Do you think upgrading the ios might solve the problem?

  • Can't open mail on i phone 4s after upgrading to iOS 8.1

    Can't open incoming mail on i phone 4s after upgrading iOS 8

    Hello Cheri,
    Thank you for using Apple Support Communities. 
    If you are unable to download photos from your iPhone. You can use the following article for suggestions to accomplish that task. 
    iOS: Unable to import photos to computer - Apple Support
    Cheers,
    Jeff D. 

  • IPad 2nd Gen, new upgrade to IOS 7, screen doesn't rotate

    I have a 2nd generation iPad that was upgraded to IOS 7 this week.  When the pad is rotated. the screen image doesn't rotate, it becomes updside down.
    What am I missing?

    Understanding the Side Switch
    http://support.apple.com/kb/ht4085

  • Can not sync photos with iPad or iPhone after upgrade to lion

    I upgraded to lion and now i get an error message saying could not sync photos with Ipad as they can not be viewed on the ipad.  I lost everything when i upgraded and had to reload all my files using a new user. Now i cant sync my photos with my ipad or my iphone.  some come over but only about 10% of the photos.

    Same issue here - followed this process and now syncing fine: http://leimobile.com/faq-how-to-fix-ios-5-photo-sync-issues/

  • IPad 3 slow after upgrading to iOS 8.2 from 7.1

    To get ready for the Watch and stay current with iCloud and my devises, I'm moving this weekend to the latest upgrades for my iPhone 5, wife's iPhone 5S, my iPad 3 with 64 gb (celebrating 3 years old on Monday!), my wife's iPad 4 and my MacBook Pro (from 10.8.5 to 10.10.2).
    I noticed immediately on my iPad 3 that things were slower - and especially loading eMails in iOS Mail App.  Is my 3 year old processor not fast enough to handle everything in 8.2?  Other Apps seem OK but startup is weird - took 20 minutes and I really don't want to turn it off again as it may not start the next time!  (It wakes from sleep just fine).
    Also now hesitating to move my wife's iPad 4 to iOS 8.2 -- but hers is a faster processor so should be OK?
    Thanks for any feedback!
    Best regards,
    Steve Schulte
    Saturday 21 March 2015

    II have a similar problem.  After installing 8.2 on my iPad3 performance is much worse.  In Safari, some pages seem to take 2 or 3 times as long to load and I have gone from feeling my iPad is quick and responsive to feeling it is sluggish.  Also, I have a lot of raw photos in the photos app that were loaded via the camera connection kit when I was on IOS 7.  It used to be great browsing them - very snappy.  Now each image takes 7 to 10 seconds to render - unusable.  I had an Apple Genius check it out, and he ran diagnostics and found that a process that renders images was crashing, and advised that I do a clean restore via ITunes which I Did.  Web browsing seems a little better, but still slow.  The slow renedering of raw images in Photos is unchanged - still 7 to 10 seconds.  Called Apple support who ran diagnostics again and said all was O.K.   Only suggestion was to restore software again, but this time don't allow restore to restore any data to create a completely virgin installation.  Haven,t done this yet, but not very hopeful.  Very disappointed - should never have upgraded, and of course you can't go back.  Been using Apple stuff for 30 years, and I think the fact that Apple will not let you install a previous version is one of the things I like the least.  If anybody has any ideas, they would be appreciated.  I do plan to try loading a new raw file into Photos to see if loading raw files on IOS 8.2 gives a different result.

  • Ipad 2 bricks after upgrading to iOS 7.0.6

    Was notified about update to iPad 2 iOS 7.0.6, did the update and the iPad 2 keeps starting running for a moment or 2 and then goes to the apple logo screen when I try to sync in iTunes it won't sync because it keeps going through this cycle.  It starts to sync then it can't find the iPad.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps..

  • I5 can not connect wifi after upgraded to IOS 6.1.2

    i5 can not connect to my laptop share-wifi after upgraded to IOS 6.1.2, while it's ok before upgrade. How can I solve it?

    FIXED!!!!
    I have iPhone 4s running 6.1.2 Everything worked great before the lovely update. My wifi did the same thing that everyone else's seems to be doing. It would not recognize my home router.
    Evidently, in the update, Apple changed how the "Ask to Join Networks" button operates. Previously, I didn't have to have the button toggled to on, my phone would just automatically lock onto my router. I have fought and fought with this update. I have done several "network settings resets". I have even restored my phone twice. I have tried every crackpot, and not so crackpot, suggestion on these forums and NOTHING has worked. I could go to settings and connect to the router each time I used the phone, but it would only stay connected for a few minutes.
    Today, I toggled the "Ask to Join Networks" button to "on", then opened Safari. My phone then asked if I wanted to join the network, I responded with "join". My phone has been on wifi all day! I left home and came back several hours later, and FINALLY... my phone locks on automatically.
    Go to settings>, Wi-Fi>, toggle "Ask to Join Networks" button to "on". Then click on your router/network in the list.
    I realize that everyone's problems are not the exact problems I had, but maybe this will help some of you having problems.
    Good Luck!

Maybe you are looking for

  • Using Parameterized Arrays in Stored Procedure

    I tried following code to pass array value to stored procedure but its giving error, as I am new to this procedure, please advise what am I missing ? Best Regards, Luqman My code is as below. CREATE TYPE num_array AS table of number; create or replac

  • How to pass a KeyEvent to a JTextPane?

    Hi, I have a JTextPane and I display a JPopupMenu on top of it. The menu implements a MenuKeyListener to catch typed text and filters the menu content based on the typed text. I also need to insert the typed characters into the document in the underl

  • Qualified links to Relative links

    Hi All- I have created a course with links to pdfs in two if the scos. They work fine when tested on my computer but when tested in the LMS the pdfs won't come up: I need to change it from being a fully qualified link to my hard drive, to being a rel

  • In a JSF Web Application

    Is there anyway in the .JSP, Javascript or Backing Bean to iterate over all the files in a directory on the server? I want to iterate over all the files in my images directory development http://localhost:8080/<app name>/images production http://<dom

  • Problem  with my "option" key

    somebody please help me of this case! I'm using iMac with OS 10.5.8, I just updated the security update-007 yesterday, actually I did nothing special, just the daily operation as usual, but I found that sometimes my iMac hold the "option" key automat