I can't turn on or wake up my iMac :-(

I am desperate!!!
I had working with our iMac. There was an Adobe Flash update (I think after opening Safari) and I left it up to the end so that I could continue what I was working with. Well, once finished, I updated Flash and it said it was successful. Then I asked the iMac to "shut down", yet it seemed to take longer than usual. I could see my display, but all the icons were gone. Yet, it did so at the end. Some minutes later I recalled I had forgotten to print out something and I went to turn on the iMac... but it is DEAD!!!
I followed this https://discussions.apple.com/message/16788901?searchText=My%20iMac%20does%20not %20turn%20on!!!%20:-(#16788901 but that first part doesn't work and I can't do the 2nd part because the iMac does not turn on at all.
I don't know if the iMac was "shut down" or if I accidentally chose "sleep".
Our iMac has Snow Leopard.
Please help me!

The iPhone 4 is doscontinued. It' can't be "brand new".
Hold down the power and home buttons together until you see the Apple logo on the screen. It should take about 20 seconds or so.  If you get no response from that, make an appointment at the genius bar and have them look at it.

Similar Messages

  • How can I turn off popup blockers on my imac 10.7.5 in Firefox

    I looked in preferences under both privacy and security and couldn't find a place to turn off Popup Blocker

    Hi shop2kill,
    You should look under the ''Content'' tab of the options window. The [[Pop-up blocker]] Knowledge Base article will give you all the details you need. It will also give you steps on setting an exception for a particular site. That way you don't have to turn it off completely.
    Hopefully this helps!

  • How can I turn off the volume when I turning on my computer?

    Hi,
    how can I turn off the volume when my imac is turn on? later if i use it to listens music or whatever I can turn it on manually
    I don't want to sound that indicates the computer is on
    thanks
    adaltam

    Hello:
    Simply hit the mute key on your keyboard (found over the F10 key).
    Barry

  • How can I turn my Mac using iTunes into an alarm clock?

    Here's my question: How can I turn my Mac, using iTunes, into an alarm clock?
    I want to be able to put my Mac to sleep but have it set up so that when it wakes up at the predetermined time iTunes will open and start playing the music I've selected....
    A "musical alarm clock"...
    A friend suggested using the Energy Saver option in Sys. Preferences to wake the computer at the right time. He said that then I could use iCal to start iTunes. I would then have to use an Apple Script to get iTunes to play the song I want.
    But is there a SIMPLER way to do this? Are there any programs out there that do this already??
    Thanks for any help....

    I recently got a copy of AlarmClock Pro from MacWorld UK. It is shareware, I think it is (USD?)19. I haven't had a chance to try it out much, but it does look quite good. I have an older version. The latest version looks even better.
    I'm sure there's plenty of freeware apps out there. You might also want to try looking here for an applescript here Doug's AppleScripts for iTunes
    p53

  • TS2621 I have my data retrieval se to manual. When I get mail I get a popup on the screen for each and every e-mail asking if I want to view it or cancel and I have to cancel each one before I can resume any other actions on my ipad. How can I turn this o

    I have my mail set to retrieve data manually. When I retrieve mail, I get a popup box for each and every e-mail message asking if I want to view or cancel and must either view or cancel each one before I can use other apps on the ipad. How can I turn these popups off?

    Try reset iPad (not Restore)
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • My phone is not working at all, I can't turn it on the screen is black

    please i need help

    Hello there,
    Firstly, welcome to the site, it's great to have you here, but I see your problem must be frustrating.
    Your iPhone may be really low on charge, meaning that it can't turn on, or show anything on the screen. Plug your device in to a power outlet (a wall socket is better than your computer) and leave it. At first, you may see no change on the screen, or no acknolegment that it is charging, but this is normal. Your iPhone may need to charge for up to twenty minutes before you see anything on the screen. Leave your iPhone overnight to do a full charge, and everything should be back to normal.
    In the event that your iPhone still does not respond, try plugging it into your computer, and opening iTunes. If iTunes doesn't recognise it, try booting it into recovery mode. To do this, make sure your device is disconnected (but stay by your computer) and hold down both the sleep/wake button on the top, and the home button. Then, after 30 seconds, release the sleep/wake button (continue holding the home button) and plug in your device into your computer. Eventually, iTunes should give you a message, and then allow you to restore your device in iTunes. It should then work as normal.
    If this still doesn't work, then it may be a hardware faliure. Take your device to your local Apple Store, and they will talk you through repair and replacement options.
    Let me know how you get on,
    Have a great day,
    Nathan

  • Can I turn off the monitor for Mac Mini and use it as a music server?

    I am in the process of upgrading my PC most likely to a Mac product. With the non-server version of Mac OS X, can I turn off the monitor connected to a Mac Mini and use it as a streaming server? Or I have to get the server version of OS X to do that?

    I plan to run Logitech Media Server on the Mac to stream music to players. Each player interacts with the Logitech Media Server to select songs to stream. When I turn on a player, it will wake up the computer from the sleep mode.
    Currently, this Logitech Media Server runs on a Windows Vista machine and it will keep the PC from entering sleep mode while playing the songs. After I play the last song, the PC will start the idle count down and then enter into sleep mode.
    Do you see any problem with my intended use of a Mac Mini?

  • Today I charged my iPhone then after the charge I can't turn it on unless I plug it on any kind of power device. It tells me to plug onto iTunes but after I do so it kept rebooting.

    My iPhone is a 3GS and is iOS 5.0.1 never JBed. After I charged at school it just crashed and unable to be turned on. I can't turn it on unless it's plug onto any power source. Even I turned it on it stays at a screen says "iPhone" and after I swiped the screen it tells me to plug onto iTunes. But after I plugged it on iTunes it just kept rebooting and not syncing or whatever. My computer and iTunes can't detect it also.

    If your iPhone suddenly freezes or is just not working right, you can do a hard reset by following these simple instructions:
    Press and hold the Home button (big circle below the screen) and the Sleep/Wake button (on top of the iPhone) simultaneously.
    Hold both buttons until the iPhone shuts off and begins to restart.

  • Please help me..?! My iphone 4 is low battery so i'm charging for 8 hours and i turn on it..But the iphone 4 can't turn on..!! Please help me..!!

    Please help me..?! My iphone 4 is low battery so i'm charging for 8 hours and i turn on it..But the iphone 4 can't turn on..!! Please help me..!!

    Try
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • Can i turn the Laptop screen off while connecting the TV?

    Dear All,
    I am connecting my Mac to TV 32'' via mini display port converted to HDMI.
    I am using it on MAC OS X 10.6.6, and on Windows 7 Ultimate SP1 also.
    when i am connecting my TV, the 2 screens are on, Laptop screen and TV screen.
    Can i turn the Laptop screen off while connecting the TV?
    how to do this on both operating systems?
    Thanks & Regards,
    Boudy,

    The quick answer is, hook up the tv to the computer, close the lid, then wake the computer up by clicking the mouse while the lid is closed. Not sure if it'll work while running windows, but I'd bet it does if you have the mac drivers installed on the win os.

  • I can't turn my i phone off

    i can't turn off my phone.
    it is a 3 or 3s whatever but none the less i cant re boot it.
    can anyone help

    Press the sleep/wake button & home button at the same time, keep pressing until your phone turns off. You can either release at that point or keep pressing until you see the Apple logo...that's an iPhone reset.

  • I can'nt turn on my iphone

    The logo apple is on the screen and I can'nt turning on or off

    See Here for  >  Frozen or unresponsive iPhone
    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430
    More Info here...
    https://discussions.apple.com/message/19521062

  • Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603

    Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603 & 1611 appeared! please help me!!

    You may have a faulty USB cable. Try another.
    Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
    Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the iPhone.
    If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Select the device in iTunes and choose "restore from backup".
    If you still can't get it to work, you have done all you can and only Apple will be able to help.

  • I can't turn icloud backup on.  The off/on is grayed out.

    How can I turn iCloud backup on my ipad?  The off/on is grayeed out.

    First make sure you have icloud set up. Go to settings/icloud
    You can also try..
    Make sure IOS is updated to latest version
    (How to update your iOS device
    http://support.apple.com/kb/HT4623)
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings  (or for network connection issues 'reset network settings').
    (no media or data will be deleted from the device, this will only take a minute).

  • I can't turn my IPad on

    I can't turn my IPad on. I have tried restarting it and the Apple Icon will show up but it is still not working. What should I do?

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

Maybe you are looking for

  • How to pass 2 parameters in a hyperlink?

    Hi, I have a jsp form: <form name="form1" action="/servlet/ShoppingServlet" method="get">      <input type="radio" name="productid" value="1">Solitaire Classic / 4.50<br/>      <input type="radio" name="productid" value="2">Bingo / 3.95<br/>      <in

  • 1z0-054: Oracle Database 11g Performance Tuning Expert

    I am planning to give the exam 1z0-054 to get the certification, "Oracle Database 11g Performance Tuning Expert". The Certification Path says that, if you are and "OCP DBA 11g" then you can directly take this paper, and there is no Instructor Led Tra

  • Class Creation Problem in Publish settings

    now iam working in flash 8 version .fla file.......firstly iam save as it to cs4 via Macromedia flash cs4....when i trying to add a new main class for this file it showing error as "This feature is not supported by flash 8 , Action script 2.0,to use

  • Character coding problem in UIX application

    Hi, I've just created a simple UIX Struts application with an input field on the page. If I write in a character with a code greater than 127 (e.g. 'á' (0xe1)), in the ActionForm I get its UTF-8 coded, 2 byte long variation: 0xc3 and 0xa1. I think I

  • Activation problem of Illustrator CS2

    Hi, i'm from IT of Brandt Italia S.p.A., we have 4 licence of Adobe Illustrator CS2 installed and actually utilized by users. 1 pc was broken last week, the hard disk failed and i cannot recover any data. I'm installing another pc for the same user w