I can't unable the alarm.

So in January my Ipod fell on the floor and the screen crack on the top left corner. After 2 week the touch screen stat to have some problem (bottom of keyboard dont working, sometime I had to touch twice to active an apps.) but to day it seem don't want to work any more. If I get lucky, after maybe 100 try I can open it but I not able to open the clock app. So I'm not able to unactive the alarm, so the alarm ran every 5 min to the death of the battery. Is there an other way to unactive the alarm? At least I would be able to use my 300$ as a watch without the annoying alarm.
As I remember the OS is the lastest for Ipod 4 so 6.1.5

Connect the iPod to your computer and restore vi iTunes. See what happens

Similar Messages

How can I stop the alarm using fingerprint function

I set two alarm records in my 5s and i was aware. I use fingerprint to stop it but it didn't work and each alarm rang for 15 min. I couldn't stop it. How can i stop the alarm?

You can either snooze it, or slide to unlock to stop it.

Can I log the Alarms & Events in Citadel?

Platform - LabVIEW DSC 6.1
OS - WinNT 4.0 SP 6.0
Hardware - NONE
By using "HIST Alarm & Event Query.vi" I can view the Alarms and events occured over a span of time. The data can be retrived even when the DSC Engine is shutdown but if I re-start my PC the Alarm & Event data is lost though the file "Ale00000.ale" which logs the Alarms & Events is there. Can you tell me what the problem is ? Is there a method of logging the Alarm & Event data automatically in the Citadel like the logging of the tag values ?

Somehow nobody replied to you. Maybe this is because we do not exactly understand what you describe.
Just in general : LabVIEW DSC 6.1/7 logs all the values/data and all the alarms and events through the Tag Engine (DSCEngine). Therefore, you need to do everything through tags. I can imagine that you configure a discrete tag with a certain alarm configuration. Once you set this tag to high it will generate an alarm. The unfortunate thing is that you can not specify a unique customized HIHI/HI/LO/LOLO message.
The behavior you descirbe with the "life-time" of alarms is wired. Either you ran an older version of Logos which might had - a long time ago - an issue with some 'zero-files' or you mix up the historical alarms with the current, live alarms. The LabVIEW
DSC Engine could keep some alarms and shows them up in the alarm summery as long a the engine is running (live-alarms) once you shut down the engine the alarm summery will not show those alarms anymore. However, when you query the historical alarms you should get those alarms back from the database (regardless if the engine is running or not)
In LabVIEW DSC 7.0 National Instruments distinguishs between historical alarms and life alarms much better by having a "DSC Engine-internal" alarm server implemented. The Citadel Service is monitoring this alarm server and once it gets a new alarm it will put it to a relational database (MS SQL Server/MSDE).
This new change sounds quite promising for the new feature set of LabVIEW DSC 7.
Hope this helps
Roland
PS: ftp://ftp.ni.com/support/lookout/logos - Where you can get the latest logos 4.4 version for LV DSC 6.1.

How can I change the alarm ring sound?

I had to reboot my entire iPhone system yesterday, and now I can't figure out how to change the sound or the volume of the alarm, neither in the manual nor on the phone. Thanks in advance.

To change the sound associated with an alarm, when setting the alarm, go to the Sound area and select your sound from there. You can set an individual sound for each alarm. The alarm volume is the same as the ringer volume. Set it when the phone is awake in the home screen, you can set it with the volume buttons on the side of the phone.

Can't adjust the alarm volume

Why is it that the alarm volume does not change if you change the phone volume setting on the 1-30 scale. The alarm volume level is insanely loud, and s always the same whether you phone volume setting is on 1 or 30.
It would be very nice if the volume of the alarm could be changed as well as currently it scares the s..t out of me every morning when it goes off.

Currently there is no way to adjust the volume of the alarm clock sound. Even with GDR2 installed.
All i can suggest is for you to choose an alarm sound that isn't so disturbing.
I do agree though that the ability to adjust the alarm volume should be there along with the ability to have separate volume controls for other aspects of the phone's sound system.

How can I change the alarm clock sound on my iPhone

I can't figure out how to change the alarm sound on the Alarm Clock in my iPhone? Anybody got an idea for me?

What's wrong with you? Oh, now that you realized you made a mistake and I didn't say "Alarming"? The app tited "Alarmed" is the first thing that pops up if you search the App Store using the search term "Alarmed". It is also the name of the app as it appears on the screen of my phone. Oh, and the developer refers to it as "Alarmed" on his website.It may not have occured to you but, it is possible for more than one app to have the same name. Most of the people here are smart enough to figure out which one is the alarm clock by reading the description. But, we've already covered the reading comprehension thing,

How can I deactivate the alarm-clock?HELP

Every morning at 10 AM my Ipod Nano is ringing -.- I have forgotten how the alarm-clock can be deactivtated.Can somebody give me an advise how i can solve it.
Thanks

Marcel,
Navigate to the clock, then settings. You'll find a listing for alarm. Turn it off.
Jrsy

How can I get the alarm to sound on my Iphone with ios7

I set two different alarms on my phone, and I never had a problem hearing them until I updated to IOS7. I wake up late and can see the notification and snooze option, but no sound. Can anyone help?

Turn up the alert volume all the way in Sounds. Lock it so you can't change it with the buttons.

I sold my Ipad and I erase all settings how can I unable the Ipad fom my list??

Hi I sold my Ipad and i want to remove it from my list...
where is my list of products??

If you mean that they were registered to your account then you can remove them from your support profile : https://supportprofile.apple.com/
If you mean that they were linked to your account (e.g. via using iTunes Match on them, automatic downloads, or you re-downloaded past purchases) then you can see if you can remove them from the 'manage devices' part of your account : http://support.apple.com/kb/HT4627

Can't get iCal alarm to work

I've tried everything that I've read ... but I can't get the alarm to work - Does anyone else have this problem OR solution?
Thx in advance!

Do you have it set to go off to a certain song, or the beep? It might be that if you have it set off to go to a song, that listening to tunes might override the alarm. I'll know more in about 1 minute...
Mine works while playing music without headphones and the alarm is set to beep. Another minute or two and I'll test the alarm going off to a song while in shuffle mode.
I did just what I said...and it worked fine. It plays the little beeping tune and then switches to a song in the playlist you've selected.
I'm out of ideas on why it might not be working. All I can think of is to make sure that the alarm you set is listed before going back to the main menu.
Message was edited by: Spectra09

Can't set an alarm on Reminders.

I recently got the iPhone 5s, and have been having trouble with setting an alarm on the reminders app. When I set the date and time for the alarm, I hit done and I can see when the alarm is set for under the task. After about 5 seconds, the date disappears, and the alarm will no longer go off. Is there any way to fix this?

I think the problem is that reminders just doesn't work! Life's too short - The best thing is to stop wasting time trying to figure out a completely dysfunctional app until you hear that apple have reverted to the old one, or bought out a new one that does work.
There - I've saved you loads of time and angst!

In the Alarm & Event Query VI how to show the alarm data

In the Alarm & Event Query VI how to show the alarm data in the front pannel using the table or multicolumn listbox .thank you very much！！！

Hi,
Most likely there is something wrong with your specific database or your LabVIEW DSC installation. I just used the Alarm & Event Query.vi in my machine and it seems to work fine, I can see all the alarms as well as events containned in the database.
You may considerer generate another database (change the logging directory) and see if the behavior goes away. Also, make sure you have alarms and events on that database.
I could run the Alarm & Query.vi by just openning its front panel and placing the correct database in the appropriated control.

DSC-Merging the Alarm Events Generated

I am afraid whether I will be able to merge the alarm events generated in two different database configured in two PC’s (Servers).
Both the data base monitors same traces and processes, one pc will be an active server and another will be an backup server. We have situation that one server may fail and come back alive. In this situation how can I combine the alarm events generated in two different PC's?
Merging the database doesn’t helps instead generates the error when queried for logged Alarms and Events. However merging the data base combines the traces data.
We are using Labview 8.2.1 and DSC 8.2.
Any help will be much appriciated.
Thanks,
Vijay Jayabalan.

Thanks for your reply
We are monitoring about 25000+ I/O points (cFP-180X), we are using Shared Variable in order to read data from cFP and update the data for Shared Variable deployed on Two Central Server Computer (One Duty and other standby named A and B servers respectively) each hosting a separate set of shared variable for the I/O points (only difference being the computer names)
The Set of shared variable deployed on both servers, have the same configuration information such as alarms, logging etc as well as the same names.
Given a situation that Server A fails (PC Crash/shutdown/restart), then the other server B will still provide the Alarms and Event information.
However, when Server A return to normal operation then the Alarm and Event Set Time, Acknowledgement Time and Clear Time will be different than that in Server B.
With an example let us say that,
At 4.00 am in the morning Server A works fine and Server B is down, now the Shared Variable Deployed in the Server A will read data from the Field and Update any alarm information, if an alarm occurs (Shared Variable) at 4 am then this information of Set Time of Alarm (Read Alarm VI) is present in Server A and not in Shared Variable deployed Server B.
Now, on the same day let us say Server B start working normally at 11.00 am, so the (Read Alarm VI) from the Shared Variable deployed in Server B will return the Set Time of the alarm as 11 am and not as 4 am (which is when the alarm actually occurred)
What we would like to know is there any way we could merge the alarm information between both the computers for two sets of Shared Variables (similar to Redundancy in Lookout)?
Kindly reply in case you need more details.

Lost the Alarm Icon

OK, did something **bleep**....
Was dumping unused applications, and I had two different alarm apps in the list. Uninstalled the one I thought was an extra, but I guess it wasn't.
I still can get to the alarm through the clock app, but I no longer have an Alarm app show up in the app drawer.
Anyone know how I can get that icon back? I've searched 3 different boards and can't find a relevant post.

Aha. I didn't know that. Thanks.
I never noticed after the update.

Why does iTunes/iPhone 4S insist it can't find a song on my PC or my phone when it is on both? This is resulting in me being unable to use the ringtones I created from these songs, but I can still play the songs.

OK, so I'm clearly a newb. I thought if I asked a question, it would post, and now I'm being told to post a comment, so I'm asking the same question again. Sorry I sound like an idiot. I'm new to this apple/mac stuff.
Why does iTunes/iPhone 4S insist it can't find a song on my PC or my phone when it is on both? This is resulting in me being unable to use the ringtones I created from these songs, but I can still play the songs.

If you have added the ringtone file correctly to iTunes, it will appear under iTunes 'Tones' library.
If you don't find Tones library in iTunes, go to iTunes menu EDIT/PRFERENCES under GENERAL tab, check the Tones Box under Library source to display Tones library in iTunes.
iTunes accepts only m4r file as ringtone and has to be less than 40secs.

I can't unable the alarm.

Similar Messages

Maybe you are looking for