I can't uncheck "leave all attributes" in the precompose window

Hi guys, I can't uncheck "leave all attributes" box in the pre-compose window. even after I double check it, I check the other option, I've tried with Crtl+Click over the check box, and so on and nothing works cause the option remains checked.
Somebody knows what would be the reason, is it a Bug or a Program Feature?. I use After Effects CS3 8.0.0.298
It would be so appreciated any hint on this problem. Tnxs.

Thanks to everyone for your help & time .
Steve: I’ve already cleaned them all up and the problem still there (Crtl+Shift+Alt before AE starts).
Adolfo: I’ve did it and the precomposition “Leave all the attributes*” but never “Move all the attributes” what is exactly what I want to do now..
Mylenium: Now I’m back with the first problem: I can’t uncheck “Leave all attributes in*…” cause it appears already selected. BTW That was the last option that I had selected by the moment when this bug ran therefore I’m 100% sure that this is a bug problem. As you said, it’s impossible to leave both option selected, it doesn’t make any sense at all.
I made the same project with the same picture because all of the sudden "Leave all atributtes" just freezes out. As you can see the problem comes sometimes with “Leave” sometimes with “Move”, all depends on which was the last option that I had selected by that moment.
Now is "Leave" the one who doesn't want to leave (If I can allow me a wordplay cause I'm about to cry, )
Then when I want to just select "Move", "Leave" just still selected.
What would it be?
Now, since I’m pretty sure that this is a bug, I know that I can fool it by forcing the program to leave unavailable one option with a "whatever" move, therefore the other option will be the preselected option the next time so I would be able to do my selection right. I can unavailable " Leave" by just select 2 layers, but...
What could I do to leave "Move" unavailable?.
Once again thanks all of you for your help & time.
Here’s my project and picture, just change to "Copia de Project_City.jpg" the extension to aep. (The system doesn't allow me to upload those files).

Similar Messages

  • I am uploading receipts using the PURCHASE_ORDER_RECEIPT EIP.  When I upload serialized assets each one is processed as a separate receipt (receiver_id). How can I have these all aggregated on the same receipt?

    I am uploading receipts using the PURCHASE_ORDER_RECEIPT EIP.  When I upload serialized assets each one is processed as a separate receipt (receiver_id). How can I have these all aggregated on the same receipt?
    Is there a parameter I should be using in the XML or is there a setting in Peoplesoft that will accomplish this?
    Jim

    sundy.liu wrote:
    Unfortunately however, even with the TCP tweaks enabled, I still only get a little over 1 Gb/s through the two aggregated Gig ports. It seems as though the aggregation is only using one port, though MRTG graphs of the two switch ports do in fact show that they are both being utilized equally, essentially splitting the 1 Gb/s speed between
    the two ports.
    Problem with the server? switch? Aggregation software? All the above? At any rate, I seem to be missing something.. Any help regarding this issue would be greatly appreciated!If you're only running a single stream, that's all you'll see. Teaming/aggregating doesn't make one stream go faster.
    If you ran two streams simultaneously, then you should see a difference between a single 1G interface and an aggregate of two 1G interfaces.
    Darren

  • Why i can`t see my all my photos the streaming in my new i-phone? i have 815 and i just can see 175

    Hello. do you know why i can`t see my all my photos the streaming in my new i-phone? i have 815 and i just can see 175

    Photo stream photos are only kept in photo stream for 30 days, although up to 1000 will remain on your device until you delete them.  When you connect a new device to your photo stream it will only receive photos added in the last 30 days as the earlier photos are no longer there.  Chances are, the missing photos were more than 30 days old.
    If the missing photos are on another device, you could create a shared photo stream including the missing photos and invite yourself, as explained here: http://help.apple.com/icloud/#mmc0cd7e99.  You would see then be able to access the photos on your new phone.  Another option is to import them to your computer (see http://support.apple.com/kb/HT4083), then sync them to your new phone using iTunes.

  • After I updated to Yosemite I can't see my Iphoto library in the attachments window.  When I select Media - Pictures only my Photo Booth Library Comes up

    After I updated to Yosemite I can't see my Iphoto library in the attachments window.  When I select Media ->Pictures only my Photo Booth Library Comes up

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Open all documents in the same window ?

    How in Reader 9 can I configure it to open all documents in the same window instead of as individual windows?
    Thanks

    Bug report sent to Adobe:
    ******BUG******
    Concise problem statement:
    MDI removed from Reader 9
    Steps to reproduce bug:
    1. Open more than one document.
    2. Look at taskbar overflowing.
    3.
    Results: Customer is pissed off.
    Expected results: Happy customer.
    Steps to make customer happy: Get your heads out of your ***, and make MDI not just an option, but the DEFAULT. Who the hell thought going back to Windows 3.0 SDI interface technology was a good idea? Please post his/her name, and whoever approved that decision's name publically, because a) they will (or should) be looking for a new job since they just got fired, and b) I don't want to make the mistake of hiring them. I mean seriously. I thought what I was reading on the web was a hoax. I had to check snopes.com to be sure. Do you guys not have a random drug testing policy? For that matter, do you not realize that when a person, that you're trusting to make important decisions that affect millions of people, is sitting at their desk drooling on themselves and can't get out more than a single syllable word, that maybe, just maybe, they're not the person you should have in that position? Is this a product line wide decision? Should I look at scrapping all of my other Adobe / Macromedia products and upgrading to those that support 15 year old technology? Are you going to turn into another Symantec? Hey, lets buy take over great companies with great products, turn the product lines into crap, and then discontinue and abandon them. Seriously, what should we expect for Reader 10.0? Are you going to be upgrading to a console application? Please, please, please for 11.0 can we have it be phosphorous green too? I think Im going to go back to my bottle of wine now

  • Since upgrading to windows 8.1 I can not see any local files in the files window.

    I have recently upgraded to windows 8.1 and can no longer see my local files in the files window. All remote files for all remote sites are visable.
    If I change sites under local view get error thet dreamweaver can not update cache

    Thanks Nancy
    It certainly worked in windows 8.
    I have deactivated and am trying to reload software inside of windows 8.1.
    Will let you know.
    Thanks again
    Terry
    Date: Fri, 1 Nov 2013 12:13:57 -0700
    From: [email protected]
    To: [email protected]
    Subject: Since upgrading to windows 8.1 I can not see any local files in the files window.
        Re: Since upgrading to windows 8.1 I can not see any local files in the files window.
        created by Nancy O. in Dreamweaver support forum - View the full discussion
    I honestly don't know if DW CS5 is compatible with Win 8.1.  The OS compatibility FAQ only mentions DW CS6 & CC.
    http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.ht ml
    Maybe someone else can shed more light on this.
      Nancy O.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5807551#5807551
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5807551#5807551
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5807551#5807551. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Dreamweaver support forum at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Why can i see only one picture in the illustration windows with iTunes 10.5.1?

    why can i see only one picture in the illustration windows since iTunes 10.5.1?

    Assuming Apple doesn't eviscerate the files of the secondary graphics with another upgrade, there could be a plug in that reads the graphic and runs along side iTunes..we should get someone or Apple to program an alternative If we have to accept this downgrade in iTunes proper.
    I've developed a quick workaround, and am still hoping Apple will fix this!
    Go To Get Info on the tune you want to see secondary artwork for.
    Go To the Artwork tab
    Drag the back cover to the desktop, and it will create a new jpg you can open with quick viw or prieview where you can see it large!
    you end up with a lot of jpgs on the desktop to discard!

  • Just got Mac book pro. I can't connect to office remotely thru the remote window. My office is window based and I have no problem connecting while at the office thru the server but cannot at home. Any help would be appreciated!

    Just got Mac book pro. I can't connect to office remotely thru the remote window. My office is window based and I have no problem connecting while at the office thru the server but cannot at home. Any help would be appreciated!

    This what my IT replied with:
    That teh MacBook cannot connect with RWW because it requires Active-X to connect.  That MAc browsers (Safari) do not use Active-X but only Windows (IE) uses Active-X control.
    It would seem to me that there must be a way around this. Any help?
    Thanks,

  • I can't see some collection attributes in the DSAME

    Hi, this is the problem: i want to edit some collection type attributes like channelsHasFrame, channelsRow, channelsColumn... in a Container with the DSAME but the attributes didn't appears, if I try to create them, the DSAME warn me that all ready exists. The advance property for the attributes in the display profile has a false value. Why the attributes aren't displayed in the DSAME?

    That's the point I'm trying to tell. Account works weirdly. I bought so many apps with this id and I'm having a problem with some free apps. Free apps also have to appear on every account's purchases tabs (I tried with my friend's account on his MBP and it works as it has to be) but in my account don't. I'm using only one id on my computer and there is no chance to mixing up. I'm having this problem almost more than 1 year. I completely lost my Garageband, iMovie and iPhoto and I can't get them back to my account's purchases tab even I install them from store...

  • Can't modify user's attributes by the Delegated Administrator

    Hi, I've installed the JES05Q1 on Sun Fire V480. The components are Directory Server�AAccess Manager�APortal Server�AMessaging Server�AWeb Server�ADelegated Administrator. After I adding a user by DA,assigning a service package to the user, I can use it to logon the web mail and sending mail.But I can't modify it's attributes using DA. It said �goperation failed" . I found the error message "Error during user update: Service not assigned" in the log file of DA ,

    there are no operation failed message:
    [05/Aug/2005:10:12:12 +0800] conn=8159 op=1889 msgId=2474 - SRCH base="o=teamsun.com.cn,dc=teamsun,dc=com,dc=c
    n" scope=2 filter="(&(&(uid=testmail8)(&(objectClass=inetOrgPerson)(!(inetUserStatus=deleted))))(&(uid=testmai
    l8)))" attrs="departmentNumber objectClass psIncludeInGAB title givenName mailUserStatus mailForwardingAddress
    dn inetCOS postOfficeBox mailHost telephoneNumber street uid preferredLanguage postalCode mail l sn cn mailDe
    liveryOption facsimileTelephoneNumber mailEquivalentAddress inetSubscriberAccountId description mailAlternateA
    ddress st objectClass" authzid="dn:uid=admin,ou=people,o=teamsun.com.cn,dc=teamsun,dc=com,dc=cn"
    [05/Aug/2005:10:12:12 +0800] conn=8159 op=1889 msgId=2474 - RESULT err=0 tag=101 nentries=1 etime=0
    [05/Aug/2005:10:12:12 +0800] conn=8159 op=1890 msgId=2475 - SRCH base="o=teamsun.com.cn,dc=teamsun,dc=com,dc=c
    n" scope=0 filter="(|(objectClass=*)(objectClass=ldapsubentry))" attrs="sunRegisteredServiceName" authzid="dn:
    cn=dsameuser,ou=DSAME Users,dc=teamsun,dc=com,dc=cn"
    [05/Aug/2005:10:12:12 +0800] conn=8159 op=1890 msgId=2475 - RESULT err=0 tag=101 nentries=1 etime=0
    [05/Aug/2005:10:12:12 +0800] conn=8159 op=1891 msgId=2476 - SRCH base="o=teamsun.com.cn,dc=teamsun,dc=com,dc=c
    n" scope=0 filter="(|(objectClass=*)(objectClass=ldapsubentry))" attrs="sunRegisteredServiceName" authzid="dn:
    cn=dsameuser,ou=DSAME Users,dc=teamsun,dc=com,dc=cn"
    [05/Aug/2005:10:12:12 +0800] conn=8159 op=1891 msgId=2476 - RESULT err=0 tag=101 nentries=1 etime=0
    [05/Aug/2005:10:12:12 +0800] conn=8159 op=1892 msgId=2477 - SRCH base="o=teamsun.com.cn,dc=teamsun,dc=com,dc=c
    n" scope=2 filter="(&(&(uid=testmail8)(&(objectClass=inetOrgPerson)(!(inetUserStatus=deleted))))(&(uid=testmai
    l8)))" attrs="departmentNumber objectClass psIncludeInGAB title givenName mailUserStatus mailForwardingAddress
    dn inetCOS postOfficeBox mailHost telephoneNumber street uid preferredLanguage postalCode mail l sn cn mailDe
    liveryOption facsimileTelephoneNumber mailEquivalentAddress inetSubscriberAccountId description mailAlternateA
    ddress st objectClass" authzid="dn:uid=admin,ou=people,o=teamsun.com.cn,dc=teamsun,dc=com,dc=cn"
    [05/Aug/2005:10:12:12 +0800] conn=8159 op=1892 msgId=2477 - RESULT err=0 tag=101 nentries=1 etime=0

  • How can i create a gradient chooser within the plugin window

    Hi
    i'd like to create a gradient chooser similar to the one used in Photoshop but inside the plugin window.
    How can i do that ?
    And i need a way that is compatible Mac/windows if possible
    thanks a lot!
    Jeff

    Hi Chris
    thank you for your answer.
    finally i got WxWidgets working within Photoshop thanks to Dimitri from wx-users and i also found an all-done gradient editor! so all is good thanks
    Jeff

  • Can we create graphic and text in the same window of smartform without using template?

    we create graphic and text in the same window of smartform without using template?

    Hi Kinjal,
    as far as i understand you are talking about a template which you can partitioned and in one part you wants to show your graphics and in other part you wants to print your text, the border of template shall remain invisible.
    If you wants to do it without using a template, you can do it as sujjested by Susmitha, but creating a template will provide you more flexibility that if you wants to change the attributes in future you can do it easily.

  • Can we open a linked report in the same window instead of new tab

    Hi,
    Please suggest me i have a link to another layout on one of the layout in our report. When ever i click on the link in the layout it opens a new window.
    i don't want that to happen can i have it in the same window?
    thanks
    Vijay

    What is your report template type? Is it RTF or XPT (Layout Editor)?

  • How can i create a filechooser button inside the plugin window?

    Hi
    i'd like to create a filechooser button to load/save but inside the plugin window. Is it possible ? if yes how can i do that ?
    and i need the algorithm to be Mac/Windows compatible if possible
    thanks a lot
    *best regards*
    Jeff

    If by the "plugin window" you mean the dialog an automation or a filter plugin from the SDK sample code opens for you, you have to write platform-specific code using either Cocoa on Mac or regular WinAPI on Windows (e.g. by hooking GetOpenFileName()/GetSaveFileName() functions to a button you will add to the resource file or create dynamically). Take a look at any plugin that has a GUI (e.g. the Dissolve plugin) and you'll see that the GUI code is entirely platform-specific as there is no platform-independed GUI framework bundled with Photoshop anymore.
    Another option is to use some third-party cross-platform library such as Qt, but if you just need a couple of buttons and file selection dialogs it's probably not worth the trouble,.

  • Why firefox in my desktop can't open a new tab in the same windows?

    I can't open a new tab by clicking the + symbol. I don't know why this happen. If I want to open a new tab, I have to take a right click and then choosing open new tab. I think this is so terrible, I can't access the page on the same windows.

    Uninstall the '''''Ask Toolbar'''''. It can cause that problem.
    *http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
    *http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
    *http://kb.mozillazine.org/Uninstalling_toolbars
    If that does not solve your problem:
    *See --> [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
    *See --> [http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
    *See --> [http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Maybe you are looking for