I can't uninstall or repair Quicktime

Hi,
I have Quicktime (recent version)on my PC. De installation didn't go right. No messages what went wrong. No I try to uninstall. But I get about the same message. So now I am stuck. Ik can't uninstall, I can't repair and so I can't use iTunes for my iPod.
How do I get rid of Quicktime, so I can do a clean install.
Frank

Hi, Frank
I got the same problem too and this is how I fixed it.
1.Go to C:\Program Files, then delete the entire QuickTime folder.
2.Go to C:\Windows\System32, then delete QuickTime. and QuickTime directory.
3.Click Start - Find/Search - All Files And Folders, select the hard drive ( C: ) to look in, type in QuickTime, then click Find/Search. when the list of files appear, right-click on and delete all the ones that you confirm are associated with QuickTime.
4.Click Start - Run, type in REGEDIT, then click OK. Click the + in:
HKEYLOCALMACHINE
Software
In the Software sub-menu, right-click directly on the Apple Computer entry, then click Delete - Yes.
(Note: If you click the + in the "Apple Computer" entry, you'll see "QuickTime" listed there)
5.Go back into the registry and click the + in:
HKEYLOCALMACHINE
Software
Microsoft
Windows
CurrentVersion
Uninstall
Start at the top of the Uninstall list and click on each sub-folder and look at the entries in the right pane. When you find the sub-folder for QuickTime, right-click it and delete it. The QuickTime entry will possibly be listed more than once in the Uninstall list, so keep going until you get to the bottom of the list.
Close the registry editor. The QuickTime entry should now be gone from Add/Remove Programs
6.Run CCleaner to help delete registry keys related to QuickTime.
7.Run Windows Install Clean Up to remove QuickTime installer.
Maurice

Similar Messages

  • TS3988 error 2343 - can't uninstall or repair icloud

    My itunes would not recognize my iphone or my ipod after latest itunes update.
    I tried everything and itunes kept saying that it could see the devices but not recognize them, and if the prob persisted, to uninstall
    itunes.
    I did and I noticed there were 2 versions of icloud installed.  I installed one with no problem.  The second won't uninstall and won't repair.
    Also, it wont allow me to reinstall itunes.
    Help!

    Hi, Frank
    I got the same problem too and this is how I fixed it.
    1.Go to C:\Program Files, then delete the entire QuickTime folder.
    2.Go to C:\Windows\System32, then delete QuickTime. and QuickTime directory.
    3.Click Start - Find/Search - All Files And Folders, select the hard drive ( C: ) to look in, type in QuickTime, then click Find/Search. when the list of files appear, right-click on and delete all the ones that you confirm are associated with QuickTime.
    4.Click Start - Run, type in REGEDIT, then click OK. Click the + in:
    HKEYLOCALMACHINE
    Software
    In the Software sub-menu, right-click directly on the Apple Computer entry, then click Delete - Yes.
    (Note: If you click the + in the "Apple Computer" entry, you'll see "QuickTime" listed there)
    5.Go back into the registry and click the + in:
    HKEYLOCALMACHINE
    Software
    Microsoft
    Windows
    CurrentVersion
    Uninstall
    Start at the top of the Uninstall list and click on each sub-folder and look at the entries in the right pane. When you find the sub-folder for QuickTime, right-click it and delete it. The QuickTime entry will possibly be listed more than once in the Uninstall list, so keep going until you get to the bottom of the list.
    Close the registry editor. The QuickTime entry should now be gone from Add/Remove Programs
    6.Run CCleaner to help delete registry keys related to QuickTime.
    7.Run Windows Install Clean Up to remove QuickTime installer.
    Maurice

  • Can't uninstall or reinstall Quicktime/Itunes etc.

    I have Vista X64
    I recently install itunes and quicktime. Now I want to remove them but it won't let me in control panel. So I manually deleted the folders in program files and did a search for the keywords in regedit and deleted every single reference.
    Now If I try to run the installer it says:
    http://short-media.com/forum/attachment.php?attachmentid=22751&d=1173170420
    This installer has encountered an unexpected...Error code 2738.
    And I heard on Apple forums people suggesting to use "Windows Installer Cleanup" [URL="http://support.microsoft.com/kb/290301"]http://support.microsoft.com/kb/290301[/URL]so I downloaded it but when I tried to run it:
    http://short-media.com/forum/attachment.php?attachmentid=22750&d=1173170420
    Cannot find script engine "VBScript" for script
    So now I can't use itunes/quicktime/and who knows what else requiring windows installer.
    I tried to find something to reinstall Windows Installer or the VBscript/.Net but it's all for XP and below, and doesn't work on vista.
    Can anyone help?

    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Follow through this link if you miss or forgot something. To reinstall iTunes 10.4, check here:
    iTunes Windows 10.3.1 (64 bit) (Windows 64-bit)
    iTunes Windows 10.3.1 (32 bit) (Windows 32-bit)
    Thats all I could find that close enough. Hope this helps.

  • I can not uninstall or repair my Apple Software Update.  Can someone please help?

    I am having problem installiny the latest Itunes.  I have tryed repairing my apple software update,  i have also tryed unistalling and reinstalling itunes.  i keep getting a message that a fatal error has occured.  Can someone pleez help?

    I have tryed repairing my apple software update,
    Can you walk us through what happens when you try to repair ASU? (If you get an error message, let us know what it says. Precise text, please.)

  • I can't uninstall/install iTunes or Quicktime onto my com.

    i can't uninstall itune or quicktime due to " Could not access network location C:\ProgramFiles\iTunes\iTunes.Resources\sv.lproj\EULA.nib" and  for Quicktime " Could not access network location C:\ProgramFiles\Quicktime\QTSystem\QuicktimeVR.Resources\ru.lproj

    In My Computer, open the C Drive.
    Open the "Program files" folder.
    Open the "iTunes" folder.
    Open the "iTunes.Resources" folder.
    Rename the "sv.lproj" folder svlprojOLD.
    Go back into the "Program files" folder.
    Open the "QuickTime" folder.
    Open the "QTSystem" folder.
    Rename the "QuickTimeVR.resources" folderQuickTimeVR.resourcesOLD.
    is this part the correct part or am i wrong?
    Open the "iTunes.Resources" folder.
    Rename the "sv.lproj" folder to  svlprojOLD. or "sv.lprojOLD"
    and this
    Open the "QuickTime" folder.
    Open the "QTSystem" folder.
    Rename the "QuickTimeVR.resources" folderQuickTimeVR.resourcesOLD.
    do i need to renamed the inside folder "ru.lproj"  to "ru.lprojOLD" ?

  • Cannot uninstall or repair

    I cannot uninstall or repair quicktime.  Have tried many things.  Always get error message:
    C\ProgramData\Apple Computer\InstallerCache\Quicktime 7.70.80.34\Get Last Error: 5
    Any help would be greatly appreciated.

    Hi,
    Before going further, we can check whether this was caused by software restriction policy. To check out, we can go to Control Panel->Administrative
    Tools ->Local Security Settings-> Software Restriction Policies.
    Besides, this issue can be caused by corrupted registry keys. In this case, we can click
    Run button in the following page to fix it.
    Fix problems that programs cannot be installed or uninstalled
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Best regards,
    Frank Shen

  • Can't install iTunes 6.0.2.23 and can't uninstall QuickTime

    help!!! i can't uninstall quicktime 7.0.2 (tried from control panel), which was included in my pc when i bought it, in order to install the newest version of itunes/quicktime. i would try lorraine's fix but can't even manually uninstall qt. got an error message "cannot delet file: cannot read from source file or disk". old version of itunes is gone, couldn't reinstall qt 7.0.2 (to try & repair), and remove apple itunes from NIS. i'd be grateful for any help.

    HELP!!! this is driving me crazy...does anybody know how to fix this problem. how do i uninstall old version of QT in order to upgrade to the stand alone QuickTime and newest version of iTunes? I've already tried to manually delete the QT files and folders but got an error message. This totally *****! Both Apple & Windows support are pointing to each other for fixes.

  • Quicktime Error Message/Can`t uninstall Quicktime

    After the last update all **** has broken loose nothing is working have looked all over at the forms for soultions have seen were i should uninstall both iTunes and Quicktime I`ve uninstalled my iTunes and now trying to uninstall the Quicktime so I can start all over and keep getting this error message when ask if I want to repair some files
    Error writing to file:C\Program Files\QTSystem\QuickTime.qts. Verify that you have access to that directory
    How do I verify that I have access...??? So I can finish uninstalling this mess and get thing running again...

    Did you mistype the the path? It should be c:\Program Files\Quicktime\QTsytem\Quicktime.qts.
    If you typed it correctly, that's odd.
    Assuming you mistyped it, try running a disk check to make sure there isn't a filing system error.
    Open My computer and right click on your c: drive, select Properties>>tools>>error checking. Check both the boxes.
    The check starts on the next reboot and can take a while.
    Download the version of QUicktime that does NOT include iTunes from here:
    http://www.apple.com/quicktime/download/win.html
    Close all other programs.
    Then try manually uninstalling Quicktime using the method here:
    XP
    http://support.apple.com/kb/HT1925
    Vista
    http://support.apple.com/kb/HT1923
    If that goes though OK, Restart your PC and install the stand alone Quicktime.

  • Can't install, uninstall or run QuickTime - help!

    About three weeks ago my QuickTime all of a sudden stopped working.
    When I try to play something, I get the following error message: "An error occurred inside a plug-in contained on this page".
    Then the following message comes up: "The plug-in did not initialize properly".
    I get a picture of a film strip with a broken section through it.
    When I try to uninstall Quicktime from my computer, I get the following message: "Fatal error during installation".
    I can't uninstall it, and I can't re-install it. I can't repair it or change it or remove it from the computer. Everything else on my computer seems to be working just fine.
    Any ideas? I appreciate your help!!!

    replying to Shisou
    I recently installed ACE codec version 6.3.911.0, i had a suspicion (sp) that this is what was causing the problem, but the codec pack is great so i'm hoping there's a work around.
    it's our prime suspect at the moment.
    the runtime problems arise when the codec packas contain componentry/codecs for earlier versions of QuickTime than the minimum version needed for iTunes to run. the iTunes 7.1.x versions required at least a QT 7.1.5 (up from QT 7.1.3 for the iTunes 7.0.x versions), so we got a fresh round of the codec pack businesses with that.
    (now of course, with QT 7.1.6 on the scene, i daresay we might start having some trouble with Codec packs that just contain QT 7.1.5 codecs and componentry.)
    the best thing to do first would be trying to uninstall the Codec pack. if QuickTime (and therefore iTunes) is still not running after that, try seeing if an uninstall/reinstall of QuickTime now goes through (without the fatal error). if it does, does QuickTime start working again?

  • I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have.  Can I uninstall it and go back to an older version that would have screen recording?  If so, how?  Step by step needed.  Thank you for your time.

    I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have.  Can I uninstall it and go back to an older version that would have screen recording?  If so, how?  Step by step needed.  Thank you for your time.

    Did you remove Quicktime X?
    On a normal install Quicktime 7 is installed in the Utilities folder and Quicktime Pro in the main Applications folder.
    You will need to reinstall OS X to get Quicktime X back if you have deleted it.
    I notice yor profile says 10.5.8. Quicktime X is only available on 10.6 and above.

  • I can't uninstall, repair or install itunes?????

    I get an error:
    Error with install file at C:\Windows\Installer\itunes.msi.
    The file is none existent. I can't get past this when I try installing, uninstalling or repairing.
    What do I do?
    Thanks in advance!

    Do the following, go here and install the MS cleanup utility.
    http://support.microsoft.com/default.aspx?scid=kb;en-us;290301
    Then run it and select itunes.
    Then delete the itunes folder in c:\program files\
    Then reinstall itunes.
    Of course the question might be how did that file disappear. I hope you didn't delete it. As you found it its needed to do uninstalls and repairs.

  • HT1349 I had iTunes and QuickTime on my p.c. and they stopped working. Now I can't uninstall them or re-install them. I'm stuck and Apple doesn't seem to have any avenue to go down concerning their programs. I'm getting really frustrated. Anybody know wha

    Why can't I get my iTunes or Quicktime to play? I've had my pc checked and it isn't a problem there. My java is up to date and all other programs work well. Other people I know have been having similar problems with Apple downloads. Now I can't uninstall them therefore I can't re install them.  Help! Anybody out there have the same problems? I've tried every suggestion I've gotten from these blogs and can't get Apple to respond. 

    why are you posting this in the iPhone forum?

  • Can't uninstall or reinstall itunes/quicktime

    Thursday night I used itunes. Friday night it gave me an error when I tried to use it, saying that files were missing and I needed to reinstall itunes. I tried to do that and I was given to option to repair or uninstall itunes. I attempted to repair. I got the same messages. I attempted to remove it and reinstall it. I got the same messages. I tried to restore my system to a previous setting, to see if that repaired itunes. I got similar messages. I have tried to follow advice I have seem for similar problems on this forum, to completely uninstall itunes and quicktime, I have been unable to uninstall quicktime, although it seemed to uninstall itunes, when I tried to uninstall quicktime in the add/remove programs, I get an error message that says: error- 1618 another installation is already in progress. Complete this process before proceeding.
    If I try to open quicktime alone, I get a message saying: Runtime error- this application has requested to terminate it in an unusual way. Please contact the application's support team for more info.

    Refer to yhis article:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926

  • Can't Uninstall/Install Quicktime error number: 0x80040707

    I am also having probelms with quicktime. I went to uninstall/reinstall it and have had no luck. When I run the uninstall shield, it starts and then before it goes farther than half way loaded it disappears.
    I tried everything listed in the post below mine with no luck but I noticed that I have a different error code.
    Also, I tried to install the standalone 7.0.4, it installs and then before it completes, when I click finish is comes up with this error:
    Error Number: 0x80040707
    DLL Function Call Crashed: QT Install code.Quicktimepostinstallproc
    Setup will now terminate
    I can't do anything with quicktime: run updates or use the plugins: nothing comes up or it restarts my firefox. What do I do? Really appreciate any help, I'm useless technologically. Thanks
    Inspiron 700m   Windows XP  

    hi ChummyGirl!
    Error Number: 0x80040707
    DLL Function Call Crashed: QT Install
    code.Quicktimepostinstallproc
    in this context, that often means the installation
    configuration information of the QuickTime has been
    compromised.
    here's what we'll try first.
    Download and install the Windows Installer CleanUp
    utility. then use it to clear any existing
    QuickTime installation configuration
    information from your PC:
    Descrip
    tion of the Windows Installer CleanUp Utility
    next use the QuickTime component of the
    complete uninstall instructions in the following
    document as a guide to a manual removal of leftover
    QuickTime program files and folders.
    Trouble installing iPod, iTunes, or QuickTime
    software in Windows
    once we've got all the existing QuickTime scraped
    away, let's try a standalone QT 7.0.4 reinstall,
    taking a few additional precautions.
    download and save a copy of the QT 7.0.4 standalone
    installer to your hard drive. (we'll run the install
    from there rather than online.) switch off
    antivirus and antispyware applications prior to the
    install.
    Quicktime 7.0.4 Standalone Installer
    does that install go through okay?
    love, b
    hi ChummyGirl!
    Error Number: 0x80040707
    DLL Function Call Crashed: QT Install
    code.Quicktimepostinstallproc
    in this context, that often means the installation
    configuration information of the QuickTime has been
    compromised.
    here's what we'll try first.
    Download and install the Windows Installer CleanUp
    utility. then use it to clear any existing
    QuickTime installation configuration
    information from your PC:
    Descrip
    tion of the Windows Installer CleanUp Utility
    next use the QuickTime component of the
    complete uninstall instructions in the following
    document as a guide to a manual removal of leftover
    QuickTime program files and folders.
    Trouble installing iPod, iTunes, or QuickTime
    software in Windows
    once we've got all the existing QuickTime scraped
    away, let's try a standalone QT 7.0.4 reinstall,
    taking a few additional precautions.
    download and save a copy of the QT 7.0.4 standalone
    installer to your hard drive. (we'll run the install
    from there rather than online.) switch off
    antivirus and antispyware applications prior to the
    install.
    Quicktime 7.0.4 Standalone Installer
    does that install go through okay?
    love, b
    hi nior
    Error Number: 0x80040707
    DLL Function Call Crashed: QT Install code.Quicktimepostinstallproc
    this is the error msg i get.and i went thru ur previous posts and did everything it said.the problem is still there.and as u stated in one of ur posts,itunes was working perfectly until i installed a video codec.i donno what happened after that.i tried restoring my computer to a previous setting.still it doesnt solve the problem.
    ur advice will help me solve this mess.
    thanx
    lucifer
    ibm t43   Windows XP Pro  

  • ITunes will not launch - can't uninstall Quicktime

    I'm really, really annoyed with iTunes.
    Rebuilt computer and installed iTunes 7 on a fresh config after antivirus software and firewall were installed. Had sound problems but managed to fix them.
    Rebooted and tried to open up iTunes - only to get an error, rebooted again, same thing. Tried opening Quicktime - same. Tried Quicktime settings from control panel - a Fatal error has occured.
    Uninstalled iTunes, with an eye to trying to install it again. That worked, but when I tried to uninstall Quicktime it got half way, then "A fatal error has occured". Tried downloading and installing Quicktime without iTunes - that wouldn't even run.
    Tried iTunes install anyway, but got the same problems as before. Tried v.6.5 - but that claimed the freshly downloaded file from Apple was corrupt.
    I now cannot uninstall or use Quicktime, cannot use iTunes or update my iPods and am really fed up with Apple over this shoddy update.
    I've searched through the support pages, but cannot find a fix for this problem.
    I'd be happy to try any fixes that might be around, especially if it means I can get v.6.5 on my machine (which worked fine!)
    For now, I'm going to be searching out another player for my audio and video.
    Most dissapointed.

    Tried opening Quicktime - same. Tried Quicktime settings from control panel - a Fatal error has occured.
    that corresponds to a "standalone 1603" error message on earlier versions of the itunes and quicktime installers.
    let's try this first.
    here's what we'll try first.
    Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
    Description of the Windows Installer CleanUp Utility
    Next, we’ll manually remove leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    once we've got all the existing QuickTime scraped away, let's try a careful standalone QT 7.1.3 reinstall.
    download and save a copy of the QT 7.1.3 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
    Quicktime 7.1.3 Installers … get the one that doesn’t mention itunes
    if that install goes through okay, reboot the PC and try another itunes install. does that go through okay this time?
    (if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)

Maybe you are looking for

  • Can I change my hard drive but save all the programs without having to reinstall them?

    I'm considering upgrading my MacBook Pro 13 Inch (2010) hard drive from the stock 250GB to a 500GB (not set on this size yet.) I know that upgrading would, obviously require me to take out the old hard drive and install the new one. Will I have to re

  • Custom layout

    I am trying to build a custom screen that would have a number of rows with a different number of controls in each  row. If I use TileGroup I get a nice set of rows and columns but if a row has more controls than another the TileGroup is trying to pos

  • Newbee needs help

    Hi. I'm having problems with my i-pod shuffle not showing up on my itunes. I've tried re-installing and trouble shooting to no avail. Both times I've reinstalled everything goes smoothly until I open itunes and I get a error message in my toolbar say

  • Well formed WSDL document for matrix data object

    We are not having any success in passing a matrix (row / column) data into Xcelsius using  Web Services.  We can pass a string 'vector', one dimensional but can't figure out how to get a matrix of data into Xcelsius.  It appears that Xcelsius is very

  • Is it possible to create a script that would convert 1/1/2013 (m/d/yy) to 01/01/2013 (mm/dd/yyyy)?

    Thanks in advance. Based on the feedback that I have received on my forms, I have found that users get frustated with the alert regarding the date not being formatted as mm/dd/yyyy. Is there a way to convert their entry of m/d/yy to mm/dd/yyyy? Thank