I can't update LOGIC X! URGENTE NEED HELP
I want to update my Logic X because it having some problems. But when i click in update in App Store appear "An error occurred on the App Store. Try again later. (13)"
Anybody knows what can i do for update my Logic X.
PD: I already update Mavericks
First take the steps recommended in this support article. If there's no change, continue as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Cookies/com.apple.appstore.cookies
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. Log out or restart the computer and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Similar Messages
-
Can't update ipod...need help asap!
Help!!! My computer was sent to get fixed and because some stuff was reformatted, I am unable to use certain programs....most importantly, I am unable to update my ipod which I need to do in the next day. Unfortunately, I will not be home where the software is for about three weeks. When I attempt to plug in my ipod to update the songs, the hardware isn't recognized. Is there anything I can do to get it working?
If desperate I may be able to use someone else's software but will that work or do I need to use the one that came with my particular ipod?
pc Windows XPunfortunately this didn't solve my problem. from the little i know, i think the problem is that my entire hard drive was transferred while fixing my computer, and because they were temporarily relocated, that somehow tampered with all of my files, causing many to need to be reinstalled. my problem is that i do not have any of the software needed.
t> this might help
http://docs.info.apple.com/article.html?artnum=93716 -
Can i update logic pro 9 to x or do i have to rebuy it?
can i update logic pro 9 to x or do i have to rebuy it?
The full price of Logic Pro was reduced during the life of Logic Pro 9 to be only a fraction of the original price. Thus, the full price today is still cheaper than the old model for upgrade prices. Net result - just buying the new version when one comes out (e.g. Logic Pro X) costs about the same, if not less than upgrades did in the past, but with the added bonus that if you're a new customer, you pay a far cheaper price first time round.
Everyone's a winner! -
Hi!!
I urgently need help with this:
When I compile this in Flex Builder 3 it says: The element type 'mx:Application' must be terminated by the matching end-tag '</mx:Application>'.
but I have this end tag in my file, but when I try to switch from source view to desgin view it says, that: >/mx:Script> expected to terminate element at line 71, this is right at the end of the .mxml file. I have actionscript(.as) file for scripting data.
This is the mxml code to terminate apllication tag which I did as you can see:
MXML code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundGradientAlphas="[1.0, 1.0]" backgroundGradientColors="[#007200, #000200]" width="1024" height="768" applicationComplete="popolni_vse()">
<mx:HTTPService id="bazaMME" url="lokalnabaza/baza_MME_svn.xml" showBusyCursor="true" resultFormat="e4x"/>
<mx:Script source="dajzaj.as"/>
<mx:states>
<mx:State name="Galerije">
<mx:SetProperty target="{panel1}" name="title" value="Galerije MME"/>
<mx:SetProperty target="{panel2}" name="title" value="opis slik"/>
<mx:SetProperty target="{panel3}" name="title" value="Opis Galerije"/>
<mx:AddChild relativeTo="{panel1}" position="lastChild">
<mx:HorizontalList x="0" y="22" width="713.09863" height="157.39436" id="ListaslikGalerije"></mx:HorizontalList>
</mx:AddChild>
<mx:SetProperty target="{text1}" name="text" value="MME opisi galerij "/>
<mx:AddChild relativeTo="{panel1}" position="lastChild">
<mx:Label x="217" y="346" text="labela za test" id="izbr"/>
</mx:AddChild>
<mx:SetProperty target="{label1}" name="text" value="26. November 2009@08:06"/>
<mx:SetProperty target="{label1}" name="x" value="845"/>
<mx:SetProperty target="{label1}" name="width" value="169"/>
<mx:SetProperty target="{Gale}" name="text" value="plac za Galerije"/>
</mx:State>
<mx:State name="Projekti"/>
</mx:states>
<mx:MenuBar id="MMEMenu" labelField="@label" showRoot="true" fillAlphas="[1.0, 1.0]" fillColors="[#043D01, #000000]" color="#9EE499" x="8" y="24"
itemClick="dajVsebino(event)" width="1006.1268" height="21.90141">
<mx:XMLList id="MMEmenuModel">
<menuitem label="O nas">
<menuitem label="reference podjetja" name="refMME" type="check" groupName="one"/>
<menuitem label="reference direktor" name="refdir" type="check" groupName="one"/>
<menuitem label="Kontakt" name="podatMME" groupName="one" />
<menuitem label="Kje smo" name="lokaMME" type="check" groupName="one" />
</menuitem>
<menuitem type="separator"/>
<menuitem label="Galerija">
<menuitem label="Slovenija" name="galSvn" type="check" groupName="one"/>
<menuitem label="Nemčija" name="galDeu" type="check" groupName="one" />
</menuitem>
<menuitem type="separator"/>
<menuitem label="projekti">
<menuitem label="Slovenija" name="projSvn" type="check" groupName="one"/>
<menuitem label="Nemčija" name="projDeu" type="check" groupName="one" />
<menuitem label="Madžarska" name="projHun" type="check" groupName="one"/>
</menuitem>
</mx:XMLList>
</mx:MenuBar>
<mx:Label x="845" y="10" text="25. November 2009@08:21" color="#FFFFFF" width="169" height="18.02817" id="label1"/>
<mx:Label x="746" y="10" text="zadnja posodobitev:" color="#FFFFFF"/>
<mx:Panel x="9" y="57" width="743.02814" height="688.4507" layout="absolute" title="Plac za Vsebino" id="panel1">
<mx:Text x="0" y="-0.1" text="MME vsebina" width="722.95776" height="648.4507" id="Gale"/>
</mx:Panel>
<mx:Label x="197.25" y="748.45" color="#FFFFFF" text="Copyright © 2009 MME d.o.o." fontSize="12" width="228.73239" height="20"/>
<mx:Label x="463.35" y="748.45" text="izdelava spletnih strani: FACTUM d.o.o." color="#FBFDFD" fontSize="12" width="287.60565" height="20"/>
<mx:Panel x="759" y="53" width="250" height="705.07043" layout="absolute" title="Plac za hitre novice" id="panel3">
<mx:Text x="0" y="0" text="MME novice" width="230" height="665.07043" id="text1"/>
<mx:Panel x="-10" y="325.35" width="250" height="336.61972" layout="absolute" title="začasna panela" color="#000203" themeColor="#4BA247" cornerRadius="10" backgroundColor="#4B9539" id="panel2">
<mx:Label x="145" y="53" text="vrednost" id="spremmen"/>
<mx:Label x="125" y="78" text="Label"/>
<mx:Label x="125" y="103" text="Label"/>
<mx:Label x="0" y="53" text="spremenljivka iz Menuja:"/>
<mx:Label x="45" y="78" text="Label"/>
<mx:Label x="45" y="103" text="Label"/>
</mx:Panel>
</mx:Panel>
<mx:Label x="9.9" y="10" text="plac za naslov MME vsebine" id="MMEnaslov" color="#040000"/>
</mx:states></mx:Application>I know it's been a while but… did you fix this?
It looks to me like you are terminating the <mx:Application> tag at the top. The opening tag should end like this: resultFormat="e4x">, not resultFormat="e4x"/> (Remove the /).
Carlos -
Urgently need help for parsing IP header
Hi, could anyone tell which class I should use to parsing the IP header of a packet?
Thanks many many times!> Hi, could anyone tell which class I should use to
parsing the IP header of a packet?
DatagramPacket?
> Urgently need help for parsing IP header
Don't flag your question as urgent, even if it is for you.
* We all answer questions here voluntarily, in our leisure time. We do that because doing so is fun for us, because we enjoy helping people and having interesting discussions. Guess what, it is much less fun if it gets stressful. So the last thing you want to do to get us to answer your question is to pass your stress over to us.
* People who are stressed and want a fast answer often don't even find the time to do the necessary research or to formulate their question in an easy to comprehend way. That's even less fun to work with. So you really don't want us to feel your stress. Instead you want to take your time to write a well formulated post that is fun to answer. The less likely it is for us to know that your question is urgent, the more likely you are to get a fast answer!
* The simple notion that you want your post to be answered faster than those of the other members might feel rather unfair to some of us. Doubly so because often "urgent" questions actually are homework questions. Yours might be different, but someone who had bad experiences with this type of question might not read far enough to notice. -
How can I update Logic Pro X offline
How can I update my Logic Pro X on my 27" iMac at my project studio withouth internet access? I obviously moved the huge iMac to the studio after installing Logic Pro X, but I don’t intend to move it from the studio to my home whenever I need to update software.
Also there is virtually no 3G coverage in the area, so tethering is not an option either.
Will there be offline updates available (couldn’t find any at support.apple.com/downloads)? Or do I have to always copy the Logic Pro X.app from one of my Macbook Pros onto a USB stick to overwrite the Logic version on my studio iMac?
Thanks, Josh
PS: there is a related question here: https://discussions.apple.com/message/22505719#22505719
added link to related issue. Message was edited by: joshTheGreenDragonMy best guess...and it's only a guess but it is based on other Pro Apps and how Apple have handled them along with what seems to be Apple's roadmap for OS X in the next few years.. is as follows.....
Logic Pro 9 was sold as both a physical item (Logic Studio 2.0) and a download from the Mac App Store. Because some users could buy it as a physical item at one point in time, Apple continued to provide updates that could be downloaded as individual files (outside of the online Update system) and then could be physically transported to the Mac that has L9 installed.
Now LPX is only available as a download item from the Mac App Store, and the only way one can (officially) download/install LPX on a mac.. is to use the internet...the only way updates can be done is online too, via the Mac App Store online update system. Add to this the fact that Mavericks does all updates automatically without the need for User intervention and I can see why Apple have taken this path.
So, my guess is there will be no offline update files...(Unless Apple have a major change of direction with Mavericks.....) and it seems your "USB stick" method may be the one of the few practicals way of updating LPX on a Mac..when you have no internet at that location.
My method to get around the problem that one of my studios are in a location where the internet is poor... is to install OS X and Logic onto a fast external HD and boot from that. I then take that HD to another location which has a good internet connection, connect it to a Mac and boot it up and update it there. On two occasions I have even taken it to my nearest Apple store and they have happily allowed me to use their bandwidth and a Mac to achieve this. The advantage of this method is that both the OS X and Logic can be updated at the same times along with any other related content or 3rd party plugins/content.. which may or may not be updated in the future. -
Hello
Some how I switched to Apple Store in the USA. I need to switch back to Saudi Arabia Store. Saudi Arabia is not listed. The closer country is United Arab Emirates is the closest but it can not update my IPAD. How can I switch store if my country is not listed.
Thank you so much...Me also same problem
-
Can´t update logic Pro 9.0.0 to 9.1.3
Hi
I have a problem updating logic pro. I was wondering, my version is still 9.0.0 and the automatic update never find any updates for logic. So I downloaded the update manually, but I receive a massage...that there is no logic 9.0 on the system and I can´t update...very funny, because there definitely is a logic 7, 8, and 9 on the system working.
Anyone with an idea out there?
Thanks
MitschTBPlayer1950 wrote:
As well as being in the Applications folder, you MUST NOT rename the app. It has to be "Logic Pro.app" or the updater will not find the file.
Cheers
TB
...or just *Logic Pro* (if you have the .app suffix disabled systemwide, which I believe to be the default in OS X) -
Alright, this is driving me quite mad. This is my original thread: http://discussions.apple.com/message.jspa?messageID=2061139#2061139
Basically in a nutshell, I am having an issue trying to update Logic Pro 7.1.0 to 7.1.1. I have gone and done what some kind and helpful board members here have advised me to do; I've done and repaired my permissions and I've went through the disk utility to repair any disk errors. And I have been in a tech support email exchange with Apple's Logic Pro Support for about a week now, and their final word was "ERASE & INSTALL"
And here I am, fresh off a clean install of Tiger and the error still lingers.
At this point, I no longer have a clue of what might be the issue anymore. My only guess is...could the actual installer file on Apple's server somehow become corrupt? My guess is no, because some board members from my last thread had noted that they had absolutely no problems updating Logic without any hassles.
I know this is a very miniscule error. It is only a minor update to Logic, but because it's still not corrected after a clean install has got me worried.
Can anyone here see a solution to this? I would really appreciate any more help.I'm on Tiger 10.4. The reason why I haven't upgraded to 10.4.6 is because I really don't feel like updating Pro Tools LE and the DigiCore Audio drivers to adapt to the new Mac OS update. But now that you mention it, could that be the reason why?
And I haven't changed anything in Logic's setup. Didn't create subfolders, move files, or anything. Just intalled it in the Applications folder. And I know its in there. -
[URGENT] Need Help Updateing BIOS
well my concern is recently purchased Lenovo G580 (2689)
my BIOS version is 62CN41WW, 10-09-12
I want to flash the BIOS kindly somebody help me to geta detailed procedure for flashing the BIOS
Any help would be highly appriciated
And if so is it possible to Remove the exiting the Pheonix BIOS and Flash it and Install Insyde BIOS??....kindly help mehi Abinash,
You can follow this article on how to safely flash the BIOS.
As for modifying the BIOS, you can only update the BIOS that came with the PC. If you flash it with a different type (i.e. Phoenix BIOS to Insyde BIOS, you might end-up corrupting the CMOS settings rendering the computer unsuable.
It maybe possible though to modify BIOS files using different tools as discussed in this thread.
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
URGENT *** Need help with SPEL
Does anyone have sample code of assigning SPEL attributes in both Process Request and Process Forms Request.
SPEL is adaption of EL in jsp/servelets in OA Framework. Its basically expression langauge so, you can't update it in process or process form request directly. SPEL in OAF is used attcah any UIX bean property like render,read only etc to a attribute in a View object. Hence if you need to update SPEL, update the VO attribute programatically in process or process form request.
--Mukul -
Hi my friends and Labview Application Engineers,
I need help urgently.
I need to map my table control into a multicolumn listbox.
However, I get Error 1057 as shown in attached photo.
How should I get rid of the error? Thank you very much!
Attachments:
Error Msg.jpg 84 KB-You want to get more views??? I think if your post is important and valid automatically many will view the post and try to help. But if you simply post the same thing 2 times doesn't mean you get more views.
-Coming to solve problem can elaborate your problem little more and post your vi if possible in LV12.
Thanks
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13 -
have macbook pro with OS X yosemite 10.10.1 that i need step by step procedures to clean so I can give it to someone else, need help
Before you sell or give away your computer, in addition to the steps listed in this support article, take these steps:
1. Run Apple Diagnostics or the Apple Hardware Test. The buyer will do this (or he should), and you don't want to be surprised by the results.
2. Reset the PRAM and the SMC, which might contain personal information.
3. If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
4. If you activated FileVault in OS X 10.7 or later, turn it off.
5. If you use Boot Camp, the partition must be deleted.
6. If you created any other data partitions on the internal drive, remove them in Disk Utility.
7. If the machine has an internal hard drive, erase the one remaining data partition with the option to zero out data. An SSD doesn't need to be zeroed.
You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you upgraded to OS X 10.7 or later, you must reinstall an older OS, either from the installation media, if applicable, or by starting up in Internet Recovery mode (option-command-R at the startup chime.) If you installed from physical media, deliver those to the new owner.
If you're selling the machine, or donating it in working order, and it originally shipped with OS X 10.4 or 10.5, then you have the option of installing either from the discs that came with it or from a retail Snow Leopard disc (which you must then transfer to the buyer.) The buyer should understand that if he doesn't get the original discs from you, he won't get the bundled iLife applications or the Apple Hardware Test. Replacements for the original discs can be ordered from Apple.
The new owner will have to redownload any software that came from the App Store, including OS X upgrades, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer those either. The buyer will have to purchase them.
Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.") -
I urgently require help in recovering my user password for my MacBook Pro on OS X Lion, I forgot my password and Apple ID recoveries aren't enabled and I can't enable them as I don't know my password and my hint didn't help me at all, I really, really need help!
Also, a solution may be found if you search in the "More Like This" section over in the right column.Solution may be found if you search in the "More Like This" section over in the right column.
-
10.5.4 update interrupted...NEED HELP PLEASE
Hi everyone, this is my first post here and I REALLY need help.
I was updating to 10.5.4 today, when my laptop crashed while it was 49% into the install of the update. It said that I have to manually shut down the computer. After that, the computer loads the "User Login Information" screen and whenever I login with my password, the screen goes blue (as if its logging in) then goes back to the login screen. And no matter what I've done, I can't get passed the login screen and into the OS.
Is there is anyway I can fix this or revert back to what I had before?
If you need to know, I have a PowerBookG4 17"
Thanks In Advance
RayIs there is anyway I can fix this or revert back to what I had before?
Only if you have a data backup. You can try data restore options on my FAQ*:
http://www.macmaps.com/backup.html
If you don't have one. If you got a four language screen telling you to restart, that's a kernel panic, and you'll want a backup or restored data in any case to isolate what caused the kernel panic*:
http://www.macmaps.com/kernelpanic.html
- * Links to my pages may give me compensation. -
URGENT: Need help reading URL of current page
Hello kind people!
I need help, and its very simple:
How do i read the URL of a web page?
For example, the URL of this page is:
http://forums.sun.com/thread.jspa?threadID=5327796
So how can i be able to read in this URL in my java program?
thanks SO MUCH
P.S. I HAVE searched the java docs and everything, the closest thing i found was request.getRequestURL().? but i have no idea how to use it. you have NO IDEA how appreciative i would be if you could simply show me exactly how to read in the URL of a given page.
thanks SO MUCH
Edited by: homegrownpeas on Aug 31, 2008 5:19 PMGoing by what I understand here is a simple version of how you can read data from over HTTP.
This expects the "page" to be text (hence an InputStreamReader instead of an InputStream.)
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.OutputStreamWriter;
import java.net.HttpURLConnection;
import java.net.URL;
import java.net.URLConnection;
import java.util.HashMap;
* GPLv2.
* @author karlm816
public class HomeGrownPeas {
* @param args
public static void main(String[] args) {
HashMap<String, String> params = new HashMap<String, String>();
params.put("threadID", "5327796");
System.out.println(loadHttpPage("http://forums.sun.com/thread.jspa", params));
public static String loadHttpPage(String sUrl, HashMap<String, String> params) {
// Build the HTTP request string
StringBuilder sb = new StringBuilder();
if (params != null) {
for (String key : params.keySet()) {
if (sb.length() > 0) {
sb.append("&");
sb.append(key);
sb.append("=");
sb.append(params.get(key));
System.out.println("params: " + sb.toString());
try {
URL url = new URL(sUrl);
URLConnection connection = url.openConnection();
connection.setDoOutput(true);
connection.setRequestProperty("Content-Length", "" + sb.length());
connection.setUseCaches(false);
if (connection instanceof HttpURLConnection) {
HttpURLConnection conn = (HttpURLConnection) connection;
conn.setRequestMethod("POST");
OutputStreamWriter osw = new OutputStreamWriter(connection.getOutputStream());
osw.write(sb.toString());
osw.close();
// Now use sb to hold the resutls from the request
sb = new StringBuilder();
BufferedReader in = new BufferedReader(
new InputStreamReader(
connection.getInputStream()));
String s;
while ((s = in.readLine()) != null) {
sb.append(s);
// To make it more "human readable"
sb.append("\n");
in.close();
} catch (IOException e) {
e.printStackTrace();
return null;
return sb.toString();
}
Maybe you are looking for
-
What is the keyboard command to wake from sleep?
Im trying to remotely wake my mac from sleep from my iPad (Actions app) and wonder if there is a keyboard command to wake from sleep
-
Is it possible for the labels of new fields to not line up with already existing fields?
I am attempting to create a form where some of the labels are longer than others. Unfortunately, it appears that all labels have to match up exactly with each other. So, when I create a new field and extend the length of the label, it extends the len
-
CUCM 8.6, UnityCon 8.6 and Presence 8.6 on ESXi 5 C200 web interface lag
When trying to bring up any web interfaces or even vSphere it is so slow as to also not be usable.. Brand new install on 2 C200 UCS servers. Before you ask. Yes LRO is disabled according to Cisco's instructions and confirmed. I have CUCM and Presence
-
In the vi that I am writing I have rise and fall times to post in a very specific pattern. I can initialize an array,and I can replace elements, but in "replace element" I only find that I am given the choice of specifying a single dimensional positi
-
Want to Read BLOB data and display on Oracle form
Hi All, I have a table with a BLOB field and there is blob data saved here against a account id. I want to display the blob data on the oracle forms front end for the queried account id Any one to help me out how to read and display blob data in Orac