I can't update my ipad2 to ios 5.0.1

when I want to update my ipad2 to 5.0.1 in the itunes, the itunes show the error "this device isn't eligible for the requested build."
i can't understand what that means, and i want to find the help to solve this problem .
thanks

Try this - Disable your firewall and anitvirus software temporarily.  Then download and install the iOS update.
 Cheers, Tom

Similar Messages

  • HT201210 I can't update my IPAD2 to IOS 6, it fails and I get a message "could not backup the IPAD because the backup could not be saved to this computer--I have tried different computers?  Please, anyone have this same issue and figured out a fix?  Thank

    I can't update my IPAD2 to IOS6.  I've tried through ITUNEs.  I get a message after IOS6 is downloaded and extracted, to the effect of "could not backup the IPAD2 because the backup could not be saved to this computer."  I've tried directly from the IPAD, and by connecting through ITUNES to two separate computgers.  Can anyone help?  Thank you.

    However after part of the Itune update completed a message came up on the screen
    saying   "The feature you are trying to use is on a net work resource that is unavailable.
    Which particular .msi file does the message go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

  • Help! Can't update my ipad2 from iOS 5.1.1 to iOS 7

    IM using iPad 2
    ITs always error when I was updating my iOS 5.1.1 to iOS 7.2.1
    ITs was been lfew months ago I can't update the iOS.
    SOme time can be downloaded but not allowed to install, or can't be download, error.
    PLs help me!!:(

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    You can no longer update to iOS 6.x, or down grade the iOS.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
    Go into the iPad's Settings.
    Locate and tap "General" from the menu on the left.
    The second option from the top is "Software Update". Tap this to move into the update settings.
    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
    After canceling the dialog box, iTunes should automatically sync with your iPad.
    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
    From the iPad screen, click on the Update button.
    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • HT4972 Can I update my ipad2 to iOS 5?

    A lot of apps want ios5 but I'm not sure the ipad2 can use it.

    No, attach to the computer you setup the iPad with, in iTunes select the iPad, on the summary page click the update button.  iTunes should bakup your iPad, update the iOS to 5.1.1, and restore your content.

  • HT201442 hi, i am trying to update my Ipad2 from ios 4.3.3 to ios 7.0.4 i donwloaded the file but i am getting error 3194 and i cant update it what can i do

    Hi, I am trying to update my ipad2 from ios 4.3.3 to ios 7.0.4 after i have downloaded the update it cant update my ipad it gave me error 3194
    what can i do. Thanks

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

  • I was updating my ipad2 to iOS.5 version, and somehow the iPad turned of and the update was not finished. When i turned on the iPad the computer nor iTunes could recognize the iPad. I have windows xp. How can I solve this issue?

    I was updating my ipad2 to iOS.5 version, and somehow the iPad turned of and the update was not finished. When i turned on the iPad the computer nor iTunes could recognize the iPad. I have windows xp. How can I solve this issue?

    Try throwing it into recovery mode and starting over.
    http://support.apple.com/kb/ht4097

  • I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown. Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching f

    I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown.
    Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching for my network by name and continues to run and run without finding the network.
    Prior to updating to iOs 6.3.1 my system worked perfectly.
    Can anybody help please.

    1. Turn off router for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • How can i update my ipad2 Version 4.3.5(8l1)help plz

    How can i update my ipad2 Version 4.3.5(8l1)help no update appeared on setting general about .& is the version are the ios

    If you are using IOS 4, you need to connect to iTune (computer) to update software.
    http://support.apple.com/kb/HT4972

  • I can not update my ipad2 and now only have the itunes symbol and connection cable showing?

    I can not update my ipad2 and now only have the itunes symbol and connection cable showing?

    Connect the iPad to your computer's iTunes. You have to restore your iPad now.
    iTunes: Restoring iOS software
    Read the kb article all the way to the end. You may need to use recovery mode.

  • HT4623 How can I update my ipad2 software from 4.3.5 to 6.01?

    How can I update my ipad2 software from 4.3.5 to 6.01?

    See the chart below to determine whether you can upgrade your device and what you can upgrade to.
    IPhone, iPod Touch, and iPad iOS Compatibility Chart
         Device                                       iOS Verson
    iPhone 1                                      iOS 3.1.3
    iPhone 3G                                   iOS 4.2.1
    iPhone 3GS                                 iOS 6.1.x
    iPhone 4                                      iOS 6.1.x
    iPhone 4S                                    iOS 6.1.x
    iPhone 5                                      iOS 6.1.x
    iPod Touch 1                               iOS 3.1.3
    iPod Touch 2                               iOS 4.2.1
    iPod Touch 3                               iOS 5.1.1
    iPod Touch 4                               iOS 6.1.x
    iPod Touch 5                               iOS 6.1.x
    iPad 1                                          iOS 5.1.1
    iPad 2                                          iOS 6.1.x
    iPad 3                                          iOS 6.1.x
    iPad 4                                          iOS 6.1.x
    iPad Mini                                     iOS 6.1.x
    =====================================
    Select the method most appropriate for your situation. If you are trying to upgrade to iOS 5 or higher, then you will have to connect your device to your computer and open iTunes in order to upgrade.
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • HT4623 I haven't got an option for software update? How can I update my ipad2

    I haven't got an option for software update? How can I update my ipad2 to ios5.1

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Can u please tell me how can i update my old version ios 6 is it possible????

    can u please tell me how can i update my old version ios 6.1.4  is it possible???? plz help me i update ios 8.1.3 but it is toooo slow and some times hang my iphone 5 please suggest how can i speedup my phone:(

    This Apple support article should help you.
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support

  • HT4824 My iPhone is running with ios 4.2.1 & current version of ios is 6.0.1 in this case how can i update my iPhone to ios 4.3.5? itune will show only latest version of ios.

    My iPhone is running with ios 4.2.1 & current version of ios is 6.0.1 in this case how can i update my iPhone to ios 4.3.5? itune will show only latest version of ios.

    If you have iPhone 3G, the latest and greatest is IOS 4.2.1.
    If you have iPhone 3GS or later, you can only update to IOS 6.0.1.
    For iPhone 5 and iPad mini, you can update to IOS 6.0.2.

  • Hi frnds, i am using iphone 3gs, i want to know how can i update my iphone to ios 4.3.3

    hi frnds, i am using iphone 3gs, i want to know how can i update my iphone to ios 4.3.3 or any other ios.

    Please note the iPhone 3G can not be upgraded beyond 4.2.1.
    If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • HT2188 How can I update to the latest ios version on my ipod touch?

    How can I update to the latest ios version on my ipod touch?

    Check to see what model of iPod you have:
    http://support.apple.com/kb/HT1353
    If you have a second-generation iPod, the last version of iOS it can run is iOS 4.2.1. If you have a 3rd or 4th generation iPod touch, see:
    http://support.apple.com/kb/HT4972
    Regards.

Maybe you are looking for

  • How to change output resolution?

    Hi! I have a 13" MacBook Pro, and am using the Dr. Bott Mini DisplayPort to HDMI Adapter Pro with Optical Audio to connect to my Samsung LE22B47 TV. The resolution of the TV is 1366x768, but the best output resolution for it my Mac offers is 1344x756

  • Connecting Sony Handycam HDR-SR10 to Macbook (circa Jan 2007)

    Hey Guys, Sorry for my macbook noobness but I'm actually asking this question on behalf of my girlfriend. She has a HDR-SR10 handycam as mentioned and needs to hook it up via USB. The install disk that came with it is windows (according to her, I hav

  • Dial up Connection question

    Does anyone know if there is a program that will display the dial up speed when logging into your ISP. Internet Connect used to but, they don't offer it in 10.5. I have already tried copying it for 10.4 but, it will not work for me with 10.5. Thanks,

  • Can we include acrobat pro in browser?

    Hi all I used to use adobe reader to view PDFs, and IE and FF has adobe reader plugins to allow me to view PDFs in my browser. Now that I have installed acobat pro, my browser still open PDF files in adobe reader. Is there any way to include acrobat

  • How to transform node name in XML data source for SSIS

    I have the following xml file; I want to change the node name of Emp.location to Emp_location, Edu.location to Edu_location, Addr.location to Addr_location as it was not supported by SSIS. I have multiple files like that. I  am thinking to use SSIS X