I can't update my iPhone 4 to the iOS 4.3.3 software.
I am running windows 7 Home Premium Edition and just updated iTunes to the latest version. While downloading the iOS 4.3.3 software update the status bar fills completely, then while processing file it stops and I get an error message saying "The software for the iPhone was corrupted during download. Disconnect, reconnect and try again. Make sure your network settings are correct and your network connection is active, or try again later." My network is up and running just fine with no problems and I have attempted this update at least 7 times on my phone and a few on my wife's. PLEASE HELP!
iOS: How to update your iPhone, iPad, or iPod touch - http://support.apple.com/kb/HT4623 - If currently using pre-iOS5 you can only upgrade by connecting with iTunes, not with Software Update.
Back up your device first as updating it will erase content!
Similar Messages
-
i can't update my iPhone 5c to the update os 8. I don't have a wi fi connection. Anyone know how I can update my phone to the new 8 and connect to wi fi or use my cellular data to update it plz and thank u
Hello, Chryslers6.
Thank you for visiting Apple Support Communities.
I understand that you are wanting to update your iPhone 5c via the over-the-air option. You will need to be connected to power and a Wi-Fi source to use this option. You should be able to do this while being connected to any Wi-Fi network. You also have the option to update via iTunes. The article below will walk you through the process of updating your iPhone.
Update the iOS software on your iPhone, iPad, and iPod touch
Cheers,
Jason H. -
I just updated my Iphone 4 to the IOS 6 update and now i cant connect my iphone to Itunes because apparently my itunes is out of date? and then when i try and update itunes it says i need a new OS completely is there anything i can do???
Are you running Leopard on your Mac, Laurie?
If so, try instead updating to iTunes 10.6.3.25. (That supports earlier models of iPhones running iOS 6, even though it can't run the new iPhone 5s.)
A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3 -
I recently updated my iPhone 4s to the iOS 6. Now I can not install application updates, my music library has vanished, iTunes Match (in Settings) keeps setting itself to "Off". I have also logged off of iTunes in Settings, and it will not let me log back in. Just a few moments ago when I again tried to log into iTunes, it asked me for my Password, then replyed that I had no Match account; but I do. Is Restore the best option?
Any suggestionsI couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again. -
I tried to update my iphone 4 to the ios 7 and now its on recovery mode. How can i take it off of recovery mode?
Hi _em24,
It sounds like you are having an issue with the upgrade to your iPhone’s version of iOS, a frustrating situation to be sure. Let’s see if we can get you back up and running.
For basic troubleshooting of upgrades, and assuming you are using iTunes to do it, I would suggest using the steps in this article -
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/TS1275
If not using iTunes or the above do not produce the desired result, use the steps in this article -
Resolve iOS update and restore errors
http://support.apple.com/kb/TS3694
Thanks for using Apple Support Communities.
Best,
Brett L -
After updating my iphone 4S with the ios 6, I can no longer open my apps. HELP!
After updating my iphone 4S with the ios 6, I can no longer open my apps (Facebook, Instagram, games, Voxer, WhatsApp, Tumblr). It prompts me to enter my Apple ID. I enter my email address (what is listed everywhere as my ID) and it does not recognize that. I wondered if it is saved somewhere as something different so I went online to find it. When I go to the support page and request my apple ID, it takes me in circles to reset my password but never tells me my ID. HELP!
Hello JeepJackie
Check out the article to download your past purchases to your iPhone.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I have not updated my iPhone 4 since the IOS 5.1 update. Can I now update it with the latest software even though I am missing other updates?
When going to your software updates on your device it will provide you with the latest available update for your device.
the iPhone 4 will update to iOS 7.0.4 provided all other updates the device is asking for has been completed.
Good luck friend. -
help can't update my iphone 4s sprint to ios 6 because it exit automatically on about 75% of the installotion over the air and itunes ...
So what happened to the phone during the process? It should have gone black and restarted a couple of times and there would have been a white progress bar as the update installed. Sounds to me like you've downloaded the update file but not actually installed it. The quickest way to see version of the software is installed is to go to Settings-General-About and check Version.
-
i tried updating my iphone 4s to the ios 7 but it said error with the firmware now my phone is stuck in recovery mode and i have no idea how to fix it any suggestions??
Try Restoring it 3 times in a row and see if that works.
If not that error can indicate one of two things: Your iPhone was at one time jailbroken, had the iOS version rolled back, or ran an unauthorized beta and if none of those things are true it is a hardware error. -
I updated my iPhone 4s to the iOS 5.1 last Friday. I noticed the next day that the pictures that I had taken with only this phone were gone from my photos. I still have over 1600 pictures on my phone that are there, only the ones taken from this device are missing. Where did they go when I syned my phone? I can't find them in my iTunes.
You should be importing all pics taken with iphone to your computer regularly, particularly before any update, restore, etc.
If for some reason you have failed to do this, tehn they are very likely gone.
You can try restoring from backup. -
i tried to update my iphone 4 with the ios 7. now it want do anything except it has a picture of itune and a power cord. what can I do now to get my phone to work
The picture is suggesting you plug your iPhone into iTunes on your computer using the USB cord.
-
I updated my iPhone 4s to the IOS 7.1 and now my iTunes are mostly gone
I updated my IPhone 4s to the IOS 7.1 now most of my iTunes are missing?
Which part of your iTunes content is missing?
All iTunes content that was on your iPhone should be in your iTunes library on your computer. If so, you can re-transfer the content to the iPhone via the iTunes sync process. -
I tried to update my iPhone 4s to the ios 6 and it wouldn't download and my phone will not work now.
I tried to update my iPhone 4s to the ios 6 and it wouldn't download and my phone will not work. I started the download and it said that it had 6 hours remaining, so i just left it overnight. The next morning it was working fine, but the ios 6 didn't download. I looked at it later and it had the turning on screen with the loading bar under it. It stayed like that for a while and the bar didn't move. I needed to use my phone so I tried to make it go to the home screen, but nothing happened. I held down the lock and home button for a few seconds and everything went black. I tried to turn it back on and all it has done all day is stayed on the turning on screen. I tried plugging it into the wall, and nothing happened. I tried connecting it to iTunes, and nothing happened. I don't know what I need to do to get it to work.
OMG is working OMG OMG OMG Thanks alot dude!
-
I am unable to update my IPhone 4 to the IOS 6. I managed to back up and transfer and then when it asked to update I said yes and the sync process started, left it overnight and it came up with an error if continue you will loose all your data. So stopped! Help!
Are you currently on ios 4? If so that's where the backup comes in. You'll need to restore your backup once the software is updated.
-
HT4623 Why I can't update my iPad 2 to the iOS 7
Why I can't update my iPad 2 to the iOS 7
Are you trying to update OTA (over the air) on the iPad itself? To do so, you need to have iOS 5.x or above installed. The OTA update feature was added with this version. If you are running below iOS 5.x, you need to use your PC to update the iPad to the newest iOS 7.
Check your iOS version: Settings>General>About
The number displayed under "Version" is your current iOS version.
Maybe you are looking for
-
Function module(first name and last name as a parameter with table)
hi, i just want to know how i match input value in function module with the self created ztable first name and last name as a parameter in function module(import). regards Ankur
-
"Mail Contents of this page" images do not show
Hi, if I do send a webpage with "Mail Contents of this page" then the images the page contains do not show up on Windows machines and some Mac's aswell. The message looks good in Mail before i send it. Does anyone have a solution for me?
-
How to display back the JTable based on the coding??
Hi all, I don't know how to display back my JTable after i remove it. I want the table to dissapear and reappear in given time. Hope someone can help me. Thanks a lot import java.awt.*; import javax.swing.*; import java.awt.event.*; public class tabl
-
Hi VC-Pro's, I've created a very large model in VC. To avoid the 32K-Bug, I seperated the model in several nested Iviews. Now the titles of the charts and the tables in the nested Iviews are no longer shown. The only Title that is shown, is the title
-
Whenever I start route planning using Garmin Connect, the map opens at the same distant location every time, by default. How can I change this and make it open at my own location?