I can't update my MBP from 10.8.1 to 10.8.2

I recently bought a used MBP 13 (latest model) from Amazon. I can't seem to get the update to install from 10.8.1 to 10.8.2. I tried the manual download from the support pages and that won't work either. When I do that it states: OS X Update can't be installed on this disk. This volume does not meet the requirements for this update. Iphoto won't update because I need 10.8.2 for the update and going through software update just takes me to the app store and gives me the same error message. I saw some posts a few months back where mac mini owners had this same problem but I can't find any discussiuons concerning my model. Any help would be appreciated.

Then you need to contact Apple directly. Phone them. Or you could take it into an Apple Store and ask then to install the 10.8.2 update.

Similar Messages

My ipod touch is 3rd gen how can i update my ios from 4.2.1 to 5.1.1 when i shift restore and load the ipod3_5.1.1.ios its always say your firmware is not compatible

my ipod touch is 3rd gen how can i update my ios from 4.2.1 to 5.1.1 when i shift + restore and load the ipod3_5.1.1.ios its always say your firmware is not compatible

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

I can't update the iphone4, from an insertion iOS4.3.1 on an insertion iOS 4.3.3 - itunes gives out me an error 3259. What to me to do? How to me to update the iphone?

I can't update the iphone4, from an insertion iOS4.3.1 on an insertion iOS 4.3.3 - itunes gives out me an error 3259. What to me to do? How to me to update the iphone?

Temporarily disable your firewall and ALL of your antivirus/antispyware software and try again.

Can I update my iPhone from any PC w/o downloading and just logging in to iTunes account? Can't find that option. thanks for the help!!

Q: Can I update my iPhone from any PC w/o downloading, just logging in to my iTunes acct? Can't find that option. Thanks!!

You mean update your iPhone software? Yes, you can do that on any computer, but it REQUIRES an internet connection & yes the software needs to be downloaded unless already on the computer and the exact version for your model iPhone.

Oracle 11g database can we update patch directly from 11.2.0.3.0 to 11.2.0.4.0?

Hi,
I have installed Oracle 11g database.
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for 64-bit Windows: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
I want to update the patch.
Oracle 11g database can we update patch directly from 11.2.0.3.0 to 11.2.0.4.0?
Is any impact on the database?
Kindly suggest,
Regards,
Sachin

11.2.0.4 is nothing but a patchset of 11.2.0.3, in-place upgrade is allowed :
http://docs.oracle.com/cd/E11882_01/server.112/e23633/preup.htm#UPGRD12370
"You cannot install the new software into the same location for Oracle home as your current release, unless you are installing an Oracle Database 11g patchset release. For a patchset release, you can use the same Oracle Database 11g Oracle home."
And since it's a patchset, a direct upgrade is ok.
Lastly, yes, every upgrade has an impact (e.g. perf.), it has to be tested.
Nicolas.

Can we update the data from SSRS report to any database ?

Hi Team,
Greetings !!!!
Can we update the data from SSRS report to any database ?
Thanks,
Anand Gavle.

Nope SSRS doesnt have write back options. Its just a reporting tool
However one thing you can do is to link a webpage from SSRS report and do the changes through it
SSRS has the ability to navigate to web page through which you can capture any data inputs from users and save it to your db.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Unique data record means you can't update a record from ECC with same key.

Unique data record means you can't update a record from ECC with same key fileds right?
Details: For example i have two requests Req1 and Req2 in DSO with unique data record setting checked. on day one Req1 has a filed quantity with value 10 in Active data table. On day two Req1 can not be overwitten from ECC with Req2 with the same key fields but different value 20 in the filed quantity because of the Unique data record settings. finally the delta load fails from ECC going to DSO because of this setting. is it right?
I think we can only use unique record setting going from DSO to cube right?
Please give me a simple scenario in which we can use this setting.
I already search the threads and will assign points only to valuable information.
Thanks in advance.
York

Hi Les,
Unique Data Records:
With the Unique Data Records indicator, you determine whether only unique data records are to be updated to the ODS object. This means that you cannot load a data record into the ODS object the key combination for which already exists in the system otherwise a termination occurs. Only use this setting when you are sure that only unique data records are to be loaded into the ODS object (for example, single documents). A typical application of this is in the loading of mass data. It improves the load performance.
Hope it Helps
Srini

Can't update daisy disk from Mac App Store

Can't update daisy disk from Mac App Store!! What can i do? AppStore wrote You must login in to @@@@mail, but I login to my account!

You must sign in to the App Store with the Apple ID you used to install the app. If you don't recognize the ID, see below.
You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store notice. For example, if the App Store says you need to update "Twitter," the hacked app may be "Angry Birds" or something else entirely. Don't make any assumptions about which app you're looking for. To find it, you have to carry out a systematic search.
Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard (command-C).
In the Finder, press the key combination command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu initially showing Kind. From that menu, select Other...
A sheet will drop down. In that sheet, select Raw Query and click OK or press return.
Now there will be a text box to the right of popup menu. Click in that box and paste (command-V).
The search window will show all the App Store products you've installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the items listed in the search window is not among your purchases in the App Store. Move each such item to the Trash. You may be prompted for your administrator password. Empty the Trash.
Log out and log back in. Test.

HT4623 Can I update my iPad from iOS 5.1 to 6?

Can I update my iPad from iOS 5.1 to 6? It says there are no updates available when I check but there are apps I want that require the newer iOS.

If yours is an iPad 1 then it can only update as far as iOS 5.1.1

Can I update to yosemite from 10.6.8

Can I update to yosemite from 10.6.8, or do I need to order Lion or Mountain Lion first?
I thought I could just upgrade but when I select UPGRADE, I get messages like: "Safari can't open the specified address"

Well yes, however you do not give enough information. Technically all you need is 10.6.8, but there is more to the equation.
Easy to figure out if you look at this ref of requirements
https://www.apple.com/osx/how-to-upgrade/

How can i stop my mbp from starting up in target disk mode

how can i stop my mbp from starting up in target disk mode

It should only do that if you hold down the T key at startup. Otherwise the PRAM battery is probably near death, or the T key needs to be cleaned so it doesn't think it is being held down. To clean the keyboard properly, you will probably need to bring it in for service.

HT4972 can i update my iPhone4 from 4.3.1 to the latest ios 6.0 or do i need to update my phone to ios5.0?

can i update my iPhone4 from 4.3.1 to the latest ios6.0 or do i need to update my phone to ios5.0 first?

When you update, iOS 6.0.1 will be installed. Follow the directions here:
http://support.apple.com/kb/HT4972

Can't access new MBP from other Macs on my network

I just got a new last-gen MBP running Leopard. All Apple updates are installed. I need to access it from two Macs on my network that are running Tiger (also with all current updates installed). Tiger-to-Tiger connections are running perfectly. And the new Mac accesses the Internet, networked printers and so on just fine.
Problem: While the MBP shows up in the other machines' Network Browser, they can't connect to it. And, while the MBP sees the other machines, all it can connect to is the account Public Folders (the entire volumes are set to share).
The new MBP was populated with data from my old PB G4 using Migration Assistant.
I've never had a problem like this. I've tried disabling the MBP Firewall, rebooting the network, rebooting all of my Macs, but still no luck.
I've searched the Discussions and didn't find any help in previous postings. Hopefully someone can help me now...
Thank you!

Abbott Schindler wrote:
I can connect to any of the Tiger machines from the Leopard machine.
And the Leopard machine shows in each Tiger machine's network browser.
I've rebooted all of the machines at least once and rebooted my router and switch as well.
I've tried connecting to the Leopard machine by specifying its afp address.
None of this works. I guess I'll need to take advantage of my free 90 days of tech support and call Apple. In 20 years of owning Macs, I've never encountered anything like this. I still hope I don't need to reinstall the OS, but I'm getting very worried.
Thanks for all the suggestions; I'll keep checking back and will also post the solution if one is found.
I do not think it's an OS issue. At least one requiring a reinstall.
I just started my other MBP with Tiger. Takes a bit since it's booting via a FW400 pipe.
I will see if I can access this MBP from that one in a few minutes. Never did that - all my systems have been peers. (Booted faster than I expected.)
First I note that this Leopard box does not show up on the Tiger box.
Also "go" and browse does not show this box.
It worked but I had to enter this IP into the "connect to" on Tiger.
Required login and password.
Connected via afp and a window popped up with the volumes on this box to connect to.
Clicked this user account and there I was.
After that, this box showed up in the Finder sidebar.
So Tiger will connect to a Leopard box, but it seems that one needs to enter the IP of the Leopard box. If that does not work, then something is wrong.
Curiously, that Tiger box has not registered on this Leopard under Places.
Ah, I did not have filesharing on in the Tiger box. Turned it on and I can see it from here.
So I have bilateral network connections: Leopard here <-> Tiger there
Works for me, but that does not help you except to know that it should work.
BTW The Tiger version is 10.4.11.
Message was edited by: nerowolfe

Help! Can't update my ipad2 from iOS 5.1.1 to iOS 7

IM using iPad 2
ITs always error when I was updating my iOS 5.1.1 to iOS 7.2.1
ITs was been lfew months ago I can't update the iOS.
SOme time can be downloaded but not allowed to install, or can't be download, error.
PLs help me!!:(

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

Can't update InDesign CC from 9.0 to 9.1

I've tried re-installing InDesign CC several times, but I can't update 9.0 to 9.1. My problem is that the option to update does not appear. I've tried going through the Help > Updates panel in InDesign as well as the Creative Cloud app. Both say the app is "Up to date" but it's a lie! It says 9.0 when I look at the info.
When I uninstall InDesign CC and the Creative Cloud app and reinstall I get a notice that there IS an update but when I click it, I get an error and it won't download. Then CC app restarts itself and the update is gone.
WHAT DO I DO??? I've spent hours downloading and uninstalling and reinstalling.

Steve Werner wrote:
Try downloading the update from the Adobe website:
http://www.adobe.com/downloads/updates.html
We have been down this road before.
If you can download this update (ID 9.1) from the Adobe website why don't you point out where or provide a direct link.
It would be great if you could download updates the way we used to be able to. But no more with CC.

I can't update my MBP from 10.8.1 to 10.8.2

Similar Messages

Maybe you are looking for