I Can't update to the 30.2012.07-1

I got a prompt to update my N9 to version 30.2012.07-1
In the first step it downloads some files. After this finished fine it propted to "continue" with the installation.
The installation screen remains at "Updating 0%" for several minutes and then gives me an error that the update is interrupted, try again or cancel.
I tried this several times and always get the same error. The first time the download was ~200MB. all the other times it was 300Kb. I also try to repeat after manual reboot but i get the same error.
any help would be greately appreciated
Solved!
Go to Solution.

I had the exact same problem but was able to solve it.
I believe the problem was caused by the app MeeCatalog, that added 3rd party repositories that the updater doesn't like. This can probably be caused by other programs, that might add repositories as well.
I also had developer mode on, so I had access to the terminal.
Steps to fix this problem:
1) Uninstall MeeCatalog so it removes the repositories.
2) Reboot the phone.
3) Open the terminal.
4) Type devel-su and use password rootme unless you have changed the password.
5) Type apt-get update to update the package index.
6) Close terminal and try updating the phone again.

Similar Messages

Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004 Please help me in solving this problem.

Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004
Please help me in solving this problem.

Make sure Java is enable in your browser's security settings.
Open Java Preferences (in Utilities folder)
Make sure Web-start applications are enabled.
Drag Java 32-bit to the top of the list.
jnlp isn't an audio file format. It's just a java web-start program (Java Network Launching Protocol).

How can I sync a new Iphone 4s with an old 10.4.11 OS mac that can't update to the new version of itunes?

I have a Mac OS 10.4.11 that can't update to the newest version of Itunes. It does not recognize my new Iphone 4s. Is there other any way I can sync my phone? Apple support recommended that I update my Itunes from 9.2 to the new version but it won't install.

You cannot use an iPhone 4S with iTunes 9; you must have iTunes 10.5 or later, and that will indeed not run on Mac OS X 10.4. You'll need to upgrade your computer's OS to at least Mac OS X 10.5.8.
If, as Allan requested, you tell us your specific model of Mac, we can tell you what options you would have as regards compatible OS X versions.
Regards.

I still have ilife '09. How can i update to the new ilife? Do i have to pay for each app seperately in order to update?

I still have ilife '09. How can i update to the new ilife? Do i have to pay for each app seperately in order to update?
I am an Aperture user and I am tired of managing my old iphoto library seperately. In order to use the new combined aperture/iphoto abilities i need a newer version of iphoto. Apple says that the new iphoto is free, however my iphoto (version 8.1.2) did not update. How do i update iphoto so that i can use the library with Aperture?

iPhoto, iMovie and Garageband are free. However, you must be running Mavericks in order to download and use them. Mavericks is free also. Therefore your Mac must be capable of running Mavericks:
The following is from: Apple - Upgrade your Mac to OS X Mavericks.
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
iWork is not as it's an upgrade and not an update. Upgrades for iWork have always had to be purchased. However, the previous iWork apps will work fine with Mavericks.
OT

I get a message that says "This version of pre-release ios will expire in 7 days" What should I do? I am currently running ios 8 GM and I can't update to the public release version.

I get a message that says "This version of pre-release ios will expire in 7 days" What should I do? I am currently running ios 8 GM and I can't update to the public release version. I am stuck in the beta. Itunes will not let me restore my iphone or update it. PLZ HELP ME

Wondering if you have a current Backup on iTunes ...if yes you could put the iPhone in DFU Mode by holding the Home button while you plug in the lightning cable. Then you could Restore the iPhone to Factory Settings on 8.0.2 and after a full Restore go back and then Restore from your Backup. This happens every time a public release occurs. Many folks on the Golden Master or otherwise in the AppleSeed program with a Beta version for some reason don't move to the official release ...then the software time-bomb hits and they can't upgrade.

How do i uninstall iphoto? it was preinstalled on my macbook pro when I bought it used and I can only update with the previous owners password.

how do i uninstall iphoto? it was preinstalled on my macbook pro when I bought it used and I can only update with the previous owners password.

Do you have the current MacOS X version 10.10.2?
Then you can simply move iPhoto from the Applications folder to the Trash,
sign into the App Store with your own AppleID
reload the "Featured" main page of the AppStore with ⌘R,
then download iPhoto with your own AppleID.
Make a backup of your iPhoto Library, before your launch the new iPhoto the first time,
If your current system is not Yosemite, you can only buy a boxed iLife 11 version of iPhoto to install it independent of the previous owner.

HT2188 How can I update to the latest ios version on my ipod touch?

How can I update to the latest ios version on my ipod touch?

Check to see what model of iPod you have:
http://support.apple.com/kb/HT1353
If you have a second-generation iPod, the last version of iOS it can run is iOS 4.2.1. If you have a 3rd or 4th generation iPod touch, see:
http://support.apple.com/kb/HT4972
Regards.

I can't update to the latest version of iTunes - complains that iTunes10.7.dmg is corrupt?

I can't update to the latest version of iTunes - complains that iTunes10.7.dmg is corrupt?

Surely iTunes should be upgraded automatically? It always has in the past.
Typically a computer does not automatically update itself. This would be highly undesirable in my opinion. What if it was it started doing it just as you were going to do a presentation? I have never heard of iTunes automatically updating itself.
Why do I have to download it again?
You can let Software Update do this if you wish.
And why from the Apple website and not the itunes website?
What iTunes web site? The "iTunes website" is the Apple web site.
And if I do, wont I lose all my playlists, the info from my old phone etc.
No, you shouldn't but once a month somebody complains here than an update wiped their iTunes collection. Not sure I believe them since i don't see how it could do it, but you should always back up first.
I have just bought an iphone 5, delivered today, which wont sync with 10.6.3.
Correct. An iPhone 5 requires iTunes 10.7
When I try to upgrade via iTunes, it tells me that I have the latest version.
Maybe it is the latest version your computer can run with the operrating system version you are using.
At this point I am just going to say it is polite to leave this topic to answer the questions of the original poster (OP). You are facing a pretty different set of issues and you should start your own topic where we can focus on your issues and not get it all muddled up with the OP's.

Hi , I just go to a I phone 4s back from repair a new replacement phone. I can't activate my wifi , the wifi button is greyed,so the wifi is unavailable , and I can't update to the new iOS 6.1.3,so what should I do? Pls help me.

Hi , I just go to a I phone 4s back from repair a new replacement phone. I can't activate my wifi , the wifi button is greyed,so the wifi is unavailable , and I can't update to the new iOS 6.1.3,so what should I do? Pls help me.

Go through the steps in this Apple Support document in order
http://support.apple.com/kb/TS1559

Can i update to the OS Lion if my Mac is currently running OS 10.4.11?

Can I update to the OS Lion if I am currently running OS 10.4.11?

You first must meet the system requirements:
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
Next, you must purchase the Snow Leopard DVD from an Apple retailer or the Online Store. You must then upgrade to Snow Leopard:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).
Next, use the 10.6.8 Combo Updater to update Snow Leopard. You can now access the App Store to purchase and download Lion. Before you install Lion you should read the following:
Make Your Own Lion Installer
1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to several hours depending upon the drive size.
3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the InstallESD.dmg disc image file into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable Lion installer that you can use without having to re-download Lion.

HT5460 I can not update to the new OS X Mountain Lion. Whenever I do I get a message an error has occurred, timed out 102.W

I can not update to the new OS x Mountain Lion. I get an error that says it has timed out then "102". WHy can't I get it update??
Thanks for your help.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

My os is osx version 10.4.11 can I update to the latest os without having the os between?

My os is osx version 10.4.11 can I update to the latest os without having any of the osystems that are in between these two?

I would suggest Snow Leopard from there. Last I heard, telesales were selling it at $20 for the single user.
With that, you can run mostly everything that runs in Tiger, providing you specify Rosetta to be installed (custom installs).
You will almost certainly have problems with printer and scanner drivers unless they're very new models.
Also, some software may need updates (Adobe in particular) not all of which are free.
Normally, you can install 10.6.3 directly over the Tiger installation without upsetting your user data, applications or preferences, but you should always back up to an external drive, preferably as a bootable clone (you can use the Restore function in Disk Utility or a number of third-party apps for this).
I've done 8 installs from Tiger to SL; 6 of them went without any problems, but 2 of them wouldn't install until I erased the HDD and did a clean installation. Should that be necessary, you migrate your data back from the external during the Setup process.
For Lion, your specification is minimal and you can't make use of more than another GB of RAM (your maximum is 3GB). It would run, but very slowly.
Also, Lion doesn't have Rosetta and will not run older PPC applications (like Apple Works and older versions of MS Office), or indeed drivers for peripherals that were written in PPC code, so you'd be looking at more expense to replace a lot of programmes.

How do I keep my installer from trying to update with Photoshop instead of installer? Quark can't update because the installer opens Photoshop which doesn't recognize the file and I'm not given the option to choose anything else.

How do I keep my installer from trying to update with Photoshop instead of installer? Quark can't update because the installer opens Photoshop which doesn't recognize the file and I'm not given the option to choose anything else.

1. Sync wasn't intended to be used in that manner. You would be better off carrying around a USB Flash Stick with Portable Firefox for use on "strange" PC's.
2. You could open the "Library" {Ctrl + Shift + B} and highlight all those bookmarks and then delete them all at once. But that would also delete all the other bookmarks, and it isn't foolproof. All another person would need to do it to '''''restore''''' a bookmark backup file that has your bookmarks. Beyond that, a new Profile could be created and then the current Profile deleted; but that's "messing with" someone else's computer - an action that is worthy of terminating a friendship over, IMO.
And if that "public" computer was set up properly, Sync should have been disabled.

I currently have a 10.4.11 operating system. Can I update to the iTunes 10?

I currently have a 10.4.11 operating system. Can I update to the iTunes 10?

No.
http://www.apple.com/itunes/download/
Macintosh Hardware
Mac computer with an Intel, PowerPC G5 or G4 processor and 512MB of RAM
To play Standard Definition video from the iTunes Store, a 1.0GHz PowerPC G4 or faster processor and 512MB of RAM is required
To play HD video, an iTunes LP, or iTunes Extras, a 2.0GHz Intel Core 2 Duo or faster processor and 1GB of RAM is required
Screen resolution of 1024x768 or greater; 1280x800 or greater is required to play an iTunes LP or iTunes Extras
Broadband Internet connection to use the iTunes Store
Apple combo drive or SuperDrive to create audio, MP3, or back-up CDs; some non-Apple CD-RW recorders may also work
Apple SuperDrive to back up your library to DVDs; some non-Apple DVD-RW drives may also work
Macintosh Software
Mac OS X version 10.5 or later
Safari 4.0.3 or later
200MB of available disk space

After creating deliveries, the Bill-to and payer can be updated in the sales order.

After creating deliveries, the Bill-to and payer can be updated in the sales order.
Is there any standard customizing avaiable which will not allow the change of bill to party and payer in Sales order after delivery creation?

Either via sdh0 you can set the field as non-editable or in configuration, if you set the field for BP as not modifiable in Partner Determination for Sales Order Header, then users wont be able to change the partner function in sale order.
G. Lakshmipathi

I Can't update to the 30.2012.07-1

Similar Messages

Maybe you are looking for