I can't update to version 28.0. The update is not applied.

Firefox is trying apply the partial version of 28.0 - and says it doesn't work.
I tried to install the full update, but get the same result.
The same happens with the manually downloaded version.
What to do?
Regards / Bengt

Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 28: http://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Similar Messages

When opening a Photoshop file with Bridge, how can I control which version of Photoshop the file wil

When opening a Photoshop file fthrough Bridge, how can I control which version of Photoshop the file will open in?
I store my PSD files adjacent to the original RAW file from which it was derived.
If I open the file folder and double click on that PSD file, it opens in CS6. But,if I use Bridge (CS6) to navigate to and open the same file, it first opens Photoshop CS5 and then opens that PSD file in CS5.
How can I control which Photoshop will open a file I select when opening it through Bridge?.

Interesting, but it doesn't give a clue what I'm supposed to do. No Photoshop ducuments listed.
Look at the PSD file on the location Curt provided and search for Photoshop Document. Next to it ideally should show Adobe Photoshop CS6 if you have Bridge CS6 open. Click on it to provide the fly out menu and choose the correct Photoshop from the list.
But probably something went wrong with your install. By default Bridge chooses the latest version of PS to open its file in.
Maybe a reset of the preferences might also help you. Can you provide more details about OS version etc.
And do you have a good reason for keeping your Raw and finished files in the same location. Personally I keep them apart and use a proper file name convention (yyyymmdd and details) so I can easily search for the DNG files in my archive if I needed them but I don't make mistakes in opening the wrong one

Hi, so today i decided to update my iPhone 4 from ios 4.3.5 to ios 6.1. But it keeps giving me the 3194 error, which means my device is somewhat not eligible. So can i update or not? since apple has stopped signing ios 5...

Hi, so today i decided to update my iPhone 4 from ios 4.3.5 to ios 6.1. But it keeps giving me the 3194 error, which means my device is somewhat not eligible. So can i update or not? since apple has stopped signing ios 5...

OMG guys, i got it to work. Here's how:
1. kill everything on your iphone 4, settings, contents...
2. now uninstall itunes and install the latest one again
3. now update
Good luck everyone
<Edited By Host>

When downloading the latest version of Itunes, the software is not accessible anymore and needs re-installing. How do I prevent that when re-installing I will not loose the numbers stored on my harddisk?

When downloading the latest version of Itunes, the software is not accessible anymore and Itunes seems to need to be reinstalled. How do I ensure the Itunes music is not lost and my pc is still recognized by Itunes store?

Crikey. Okay, that's part of the Gracenote SDK (that iTunes uses to go online to get album and track information for imports).
Let's take the message at it's word. If the file is damaged, we may be able to get past this by removing it from the iTunes program files and then doing a repair install of iTunes.
In Computer, open Local Disk C:\ (or whichever drive you've got your program files installed on).
If you've got a 32-bit version of Vista, open the "Program Files" folder.
If you've got a 64-bit version of Vista, open the "Program files (x86)" folder.
Open the "iTunes" folder.
Drag the gnsdk_sdkmanager.dll file out of the folder and onto your Desktop.
Restart the PC. Head into your Uninstall a Program control panel, select "iTunes" and then click "Repair".
Does the repair install go through properly? If so, can you launch iTunes now?

TS3297 After downloading the latest version of iTunes, the store will not load. It appears as if it has loaded, but the screen remains blank.

After downloading the latest version of iTunes, the store will not load. It appears as if it has loaded, but the screen remains blank.

I have the same problem and have been fighting with it for several days. I think the last thing that I did before this happened was to let Quicktime update itself. When I open itunes and click on store, the connecting bar gets halfway and then stops. That leaves me with the white store page, if I leave it alone for a bit, I see words as in names of singers and but no pictures.
I have ran the diagnostics and see no problems at all, no event logs in windows, no errors at all. I've un-installed itunes and re-installed but no change. I'm using Norton 360 from comcast. I have windows 7 pro 64 bit. Also, the help in itunes doesn't display.
I put in a ticket with apple and the response I got back basically told me to do what I've already done. I created a new user and have the same issue.
Any help at all will be very much appreciated. I think this started August. 8, 2011.
thanks so much for reading

Error - The version number in the package is not valid. The version number cannot be greater than current version number

whats does this error mean
i download 2008 r2 and try to open package but still getting error
Error 1
Error loading The version number in the package is not valid. The version number cannot be greater than current version number.
Error 2
Error loading Package migration from version 8 to version 3 failed with error 0xC001700A "The version number in the package is not valid. The version number cannot be greater than current version number.".

can you tell me which version it is >
i try to fix in dtexec
getting following error :
Started: 2:02:13 PM
Error: 2015-01-30 14:02:14.68
Code: 0xC000F427
Source: Member Eligibility
Description: To run a SSIS package outside of SQL Server Data Tools you must
install Member Eligibility of Integration Services or higher.
End Error
Warning: 2015-01-30 14:02:14.69
Code: 0x80019002
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution
method succeeded, but the number of errors raised (2) reached the maximum allow
ed (1); resulting in failure. This occurs when the number of errors reaches the
number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the e
rrors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 2:02:13 PM
Finished: 2:02:14 PM
i cannot upgrade original package

SMC fan update does not apply

As some of you know apple released a SMC fan update to overcome the issues experienced with overworking processors.
I assumed it was doing something to overcome the BSOD which generally happens to me when I am playing WOW from as cold start.
Just for you information, this update does not apply to our models and as of yet still nothing coming.
I will be talking to a Mac person this afternoon.
Just wondering if people are still experiencing the BSOD on the 'better' NVIDIA cards.

2011-06-13 11:25:29.289 PatcherApplication[1249:e07] Verifying from caps:2011-06-13 11:25:29.289 PatcherApplication[1249:e07] Version does not match.
In English: You already have patched another Adobe product that uses an external shared library e.g. for Bridge or PDF handling an it has locked the installer database because an older version is not allowed to overwrite a newer version. Short of completely uninstalling everything, deletzing caps.db and then re-installing in correct order there is no way to resolve this, so if there is nothing crucial going on that would make the patch something to die for, simply leave everything as is...
Mylenium

How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

Two ways to print a portion of a page: zooming or using the Snapshot Tool.
ZOOMING:
Zoom into the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
SNAPSHOT
Choose Edit > Take A Snapshot.
Drag a rectangle around the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
Hope this helps!

I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.

I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.
I am running Mac OSX 10.4.11. According to the System profiler the CD/DVD drive is a "PioneerDVD-RWDVR-112D." When I compare the information under this heading, the only unusual difference from my iMac is that the G5 reads "Burn Support: Yes (Unsupported)." My iMac reads "Burn Support: Yes (Apple Shipping Drive)."
Under the System Preferences the options are set to "Ask what to do" when a blank CD or DVD is inserted. Music CD set to open iTunes, Picture CD set to open iPhoto, Video DVD set to open DVD player.
Do you have any suggestions?
Thanks, Jack

Hi Jack, great help so far!
Internal...
http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
External be sure it's Firewire & not Bus powered...
http://eshop.macsales.com/shop/firewire/optical-drives/

When i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

when i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

Unfortunately, the recording & movie industry does not respect the rights of the people who make them money, and thus you can only use the paid-for content in ways they see fit. Even if I lived in a bunker where no one else could possibly see the movie I paid for, therefor I'm not 'sharing it illegally', I would still not be allowed in a blue moon to copy that movie to DVD for TV viewing. Someone will tell you to get an AppleTV. How about Apple give us one for free? Until this changes, people wanting to use their content in multiple locations will continue to download music & movies via torrents, legally or illegally.

When I facetime the ipad (email address) it calls my phone. The accounts are completely separate. How can I get this to only call the ipad and not my phone as well?

When I facetime the ipad (email address) it calls my phone. The accounts are completely separate. How can I get this to only call the ipad and not my phone as well?
It calls both the ipad and iphone when calling the associated email address for the ipad. However, when I call the iphone it does not call the IPAD.
Thanks for your help

Are you trying to message another Apple device?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
 Cheers, Tom

I retrieved my serial number for Acrobat 8 Standard from Adobe because my system crashed. I went to the downloads and can only retrieve Acrobat 8 Pro. The installer will not take my serial number what can I do?

I retrieved my serial number for Acrobat 8 Standard from Adobe because my system crashed. I went to the downloads and can only retrieve Acrobat 8 Pro. The installer will not take my serial number what can I do?

Hi floyd99,
You can download Acrobat 8 Standard from : https://files.acrobat.com/a/preview/80aa8c58-2951-494e-808a-fb61a6b4aa29
Reagrds,
Rave

Hello, I can´t active my iPad because appears the following mesage: "Not Enough Storage, This iPad cannot backed up because there is not enough iCloud storage available. You can manage your storage in settings". I did click on Settings but still locked.

Hello, I can´t active my iPad because appears the following mesage: "Not Enough Storage, This iPad cannot backed up because there is not enough iCloud storage available. You can manage your storage in settings". I did click on Settings but still locked.

Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should restart. This will have no affect on your data.

How can I repair my internal earpiece? The speaker works not the earpiece., How can I repair my internal earpiece? The speaker works not the earpiece.

How can I repair my internal earpiece? The speaker works not the earpiece. All other sound features work. I can use an external earpiece and I get sound.

OK, I went to Private Browsing to change Never remember history to choose Use custom settings for history and then clicked on Permanent Private Browsing Mode and clicked on the bottom OK. I then went to my Firefox messages and clicked on that internal-linked multimessage and then clicked on a link. It went there for only 1 second and reverted to the top of the message, not moving on further clicking.
I then went to tools > options > privacy only to find that the default Never remember history was back in the panel. It wasn't stable at Use custom settings for history. I tried this several times. It always reverts either right away or after that 1-second success. One time it lasted an amazing 3 seconds before reverting to the top of the multimessage e-mail. So THAT failed too.
OK, so then I went to Internet Explorer and called up that message. Clicked on an internal link and watched it fail for 1 second and then clicked again and it held the message for a long time. It's something in Firefox not Int. Explorer. Please see the image to let you know what I am doing.
Comments?
Carl

I tried to play candy crush, but when i launch, app closed. I tried all (reset, restart, reload, etc.) I have the app on my pc, but even if i try to sync, the app do not apply on my iphone. When i load the app direct on my iphone, same proplem, can t open

i tried to play candy crush, but when i launch, app closed. I tried all (reset, restart, reload, etc.) I have the app on my pc, but even if i try to sync, the app do not apply on my iphone. When i load the app direct on my iphone, same proplem, can t open

Thank you for your help are you aware of any apps that will work the iso 4.2.1 system that will let you watch movies on the phone. Also I tried to down load something else the other day and got message that Safari wont let you open this is ther any to see if i have the latest safari on my phone?

I can't update to version 28.0. The update is not applied.

Similar Messages

Maybe you are looking for