I can't upload our packaged app. Each time I attempt to upload the zip file the system uploads it and then it gets stuck on the "validating .....zip" part. :(

I have created an app in accordance with your requirements. Most notably, the app runs well and error free in your provided simulator. However, as I attempt to submit the app on the https://marketplace.firefox.com/developers/submit/ page, immediately after the .zip file (contains the required manifest.webapp in the root directory) is uploaded, the system just gets stuck at the "uploading APP.zip" part and I am never allowed to proceed. This is quite frustrating. Any help with this matter would be greatly appreciated.
Regards,
Ethan-Anthony

Hi,
This is more of an end user support forum so I'm not sure that many of the people here are best placed to answer questions about submitting apps to the marketplace.
The best thing would probably be to connect to the #app-reviewers team via IRC. Then you can chat directly with them and get answers to your questions.
See here for details on how to connect to IRC: https://wiki.mozilla.org/IRC
Alternatively you can email: [email protected]
Also see here for more information on Reviewers/Apps/Testing:
https://wiki.mozilla.org/Marketplace/Reviewers/Apps/Testing

Similar Messages

I am asked to select an app each time I attempt to open a linked file via a website. How do I tell firefox to use the same app every time?

I have a website; www.designed4submariners.com. On several pages, I have created links to images which are located in a upload file folder. Each time I click on one of those links on the active website (using Firefox as browser), a dialog box appears asking me: What should Firefox do with this file? Beneath the question is a pull down menu which has "TextEdit (defualt)" selected next to a radio button. The image file will open in a browser window when I select Firefox from that pull down menu. I can not tell Firefox to open all similar files using Firefox. How can I resolve this issue as I must go through the same process each time I attempt to open one of those links.

Your response identifies the issue exactly! My website is hosted by GoDaddy. I have forwarded your linked information to their tech department. The URL below my signature is the site having the problem I've outlined when attempting to access linked images.
Thank you
Vincent G. Flaherty, Principal
Hamilton 1:1 Communications, LLC
410 Fern Road
Orwigsburg, PA 17961-9210
Tel: (267) 261-8693
Designed for Submarines:
http://www.designed4submariners.com

HT2513 How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled".

How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"

Jerry,
Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
Hey presto, I've got the @ where it should be. Excellent.
However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
Very strange. I'll look at other keyboards and see where that gets me.
Thanks, Maz

Each time I try to begin, it's asked to define adobe ID, and then nothing happens. I don't understand why ???

Each time I try to begin, it's asked to define adobe ID, and then nothing happens. I don't understand why ???

Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
- Then try on another computer

Frustrated beyond belief. Trying to download the new Itunes 11 version so I can sync my phone. It goes thru the whole process, says I was successful and then I get a message - "Apple Mobile Device Failed to start----retry, and retry, same message.

On my desk computer, I tried to download the new Itunes 11 version. I had Itunes 10. It goes thru the whole process and then says "Apple Mobilve Devide failed to start, Verify you have sufficient privileges to start service. I hit retry and then I get Installation successful followed by error 126. I can not enter Itunes at all now. If I click on the former icon it says MSVCR80.dll for error. I can't even figure out how to ask for support on this website. I have several devices linked to Itunes and need to sync.

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

How can I fix my MacBook Pro losing wireless connectivity with Epson Stylus NX625 printer. It will work once and then I get an error saying the printer is not connected.

I can connect to my Epson Stylus NX625 through my wireless network and print a page or two, but then the next time I go to print it says that the printer is not connected. Any fixes? I have tried deleting the printer and re-adding it to my MacBook Pro OS X version 10.9.4, but sometimes it doesn't even find it, and other times it says it is connected, but when I go to print it says not connected. Very frustrated. I have also installed the latest drivers, etc.
What now?

Your computer is going to run hot while playing CPU/GPU intensive games - it should heat up and the fans should be noticably loud. As to why it's 'crashing' - can you post a kernel panic log? You may have some third-party kexts that are causing the problems.
Clinton

Can't access the "Apple" icon in upper main menu to shutdown my MacBook Pro running 10.6.8! Also can't open a new finder window and main menus such as File and Edit are sluggish to open or don't open at all. Doesn't happen each time I attempt to shutdow

Can't access the "Apple" icon in upper main menu to shutdown my MacBook Pro running 10.6.8! Also can't open a new finder window and main menus such as File and Edit are sluggish to open or don't open at all. Doesn't happen each time I attempt to shutdowCan't

There are some keyboard commands (shortcuts) you can use instead of having to go to the Apple menu -
Control-Eject          This brings up the Restart-Sleep-Cancel-Shutdown window.
Command-Option-Eject          This puts the machine to sleep.
Command-Control-Eject          This closes all apps and restarts the machine.
Command-Option-Control-Eject          This closes all apps and shuts the machine down.

TS1367 Hi, I am trying to install 'Playonmac' so I can install Meta Trader 4 - however, each time I reach the next button in order to install XQuartz it hits a deadend there - the 'Installing Quartz' window is saying installing Quartz,but thats as far as

Hi,
I am trying to install 'Playonmac' so I can install Meta Trader 4 - however each time I reach the next button in order to install XQuartz it hits a dead end
- the 'Installing Quartz' window is saying installing Quartz, but all it does from there is the clock the spins around, just keeps spinning and nothing happens - I have waited and waited for it, but it just kind of freezes there. I have reloaded the software over and over, and even switched off the firewall in case it was blocking Playonmac. It is really important I load Meta Trader 4 on my Mac.
Help will be much appreciated - Has anyone had this sort of problem? Does anyone know how to resolve it?
Regards
Joe

According to wiki "the documentation from Apple states that Windows XP Service Pack 2 or Windows Vista is requisite for a Boot Camp installation, and it also mentions that trying to install an unsupported operating system could prevent the computer from booting even into Mac OS X". Sure that was from wiki, but it does seem to support and somewhat validate the problem I had with installing an earlier edition of XP.
http://en.wikipedia.org/wiki/BootCamp_%28software%29#Other_operatingsystems
Thanks for the info on the Filesystem info. My problem is that installing OS X on a mac is just a little bit more technical than installing Windows on a PC as there are a few more things to consider. Plus I'm not familiar with any of the utility programs as well. It's a **** miracle I managed to somehow create a volume to install OS X on when I thought I was erasing the partition I created for WinXP.
But I'm still not sure about the missing 40GB from my 500GB HDD. Upon coming to the desktop straight after OS X was fully re-installed I noticed that the HDD only had 460GB and that 440GB of it available space. So the full installation of OS X was 20GB, but where has the other 40GB gone? I swear I saw that I had much more available space on my harddrive (BEFORE I tried to partition my HDD under Boot Camp Assistant and stuffing up the computer). Is the missing 40GB from the ORIGINAL FACTORY INSTALL of OS X INCLUDING all my iTunes music and other files I uploaded to the computer earlier? It would make sense but there's no way, as far as I know, of checking this. Any ideas?
Cheers.

HT3529 i cannot open my messages app due to a ridiculously long text i sent, it goes to a white screen then just goes back to the home screen, what can i do ?

i cannot open my messages app due to a ridiculously long text i sent, it goes to a white screen then just goes back to the home screen, what can i do ?

OK, just remembered that someone had posted a solution for this "login loop" issue.
If you follow the directions here and be sure to enter all of this EXACTLY as it appears here, you may be able to solve this problem.
You will first need to boot into single user mode, which will bring you to a scary looking text only screen. Don't be frightened.
To do this, startup holding the Cmd-S keys together. At the entry which shows root# enter the following exactly. Write it down now, since you won't be able to copy/paste. Pay attention to case and spaces. Everything is lower case. The only spaces are between /sbin/mount and -uw, between -uw and / and between rm and /var/audit/current
Type in
/sbin/mount -uw /
Hit return and then at the next root# prompt, type in
rm /var/audit/current
Then hit return and at the next root# prompt type in "reboot" no quotes. Don't type in anything new until you get the root# prompt after entering each command.
If after entering rm /var/audit/current, you get a message back saying "no such file," then just type in "reboot" at the prompt.

I can't print an item,and each time I attempt to do so a message reads that the item is either spam

I can't print an item,and each time I attempt to do so a message reads that the item is either spam or contains a virus.
What gives?

What is the format of the item you are attempting to print (via ePrint?)? Is it a supported format? See an updated list here.
Although I am an HP employee, I am speaking for myself and not for HP

HT3226 my mail will just not open, when i try to open it it just gets stuck with the mail home page half open and when i click on the icon at the bottom it says app not responding, is there anything i can do myself or is this a trip to the Apple store?

My mail app will not open at all, it just gets stuck half open and then when i go to the icon below it says the app is not responding, is this something i can fix myself?

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Quit Mail.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Relaunch Mail and test. If the problem is resolved, you'll have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

If i factory reset my ipod touch(5th gen), can i reset it as the option 'set up as new ipod', and then i can just go into the app store/itunes store and restore my music and apps and not icloud with photos and ect?

if i factory reset my ipod touch(5th gen), can i reset it to the option 'set up as a new ipod', and then i can just go into the app store/itunes store and log into my apple ID so i can just restore my music and apps and not icloud with photos, contacts, ect. and then later i can add contacts that i need/want instead of them restoring them from icloud?
The reason i asked this question is because i have been wondering this a lot ever since i got an exchange on this ipod (and ive only had it for a few weeks now) because my last ipod had a lot of problems. so after i restored my ipod with my computer/itunes, i downloaded apps that i wanted, and then when i went to the storage to see how much storage was left, it said 0 bytes. i was freaking out because i didnt know how that could be, i mean, cause like, that is impossible when i just 'purchased' it, that the space was full but i looked and all my pictures were on this ipod and i already put them on my computer so i dont need them anymore thats why i wanna reset it now so there is nothing on it so i can have more space for stuff to do and download on it.
it is updated to iOS 8 but that happened when i purchased it, so i didnt have a choice to update it even though i didnt want to update to iOS 8...
and i hope you understand my problem..
i would REALLY REALLY appreciate it if someone could tell me a solution to my problem!!! thank you so much!
-sierra

Hey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.

How do I get the sync of my 3GS on my computer to transfer everything (files, apps, etc.) to my new iphone4? And then how do I move the sync to a newer computer so I can sync the new phone with the new computer?

How do I get the sync of my 3GS on my computer to transfer everything (files, apps, etc.) to my new iphone4? And then how do I move the sync to a newer computer so I can sync the new phone with the new computer?
My 3GS is dying and it's synced to an older computer. I have tons of datafiles as well as apps, music, text messages, etc. that I need to get moved to the new iphone4 I'm getting. Then I need to move the sync to a newer computer so that I can sync the new phone and new computer.
I understand how to get my apps to transfer to a new pc. That's not the issue. It's getting ALL the data from the 3GS to the 4 and then to a new computer.
Thanks.

Thanks much, that's very helpful for step one (getting old phone onto new phone). Very clear.
However, I still have the problem of moving to the new computer. How do I move the sync to the new computer after the new phone is set up?

I've tried to install flash player several different times ans each time i get a connection error message.It downloads fine and when i run the file to start install,it installs up to 5% and then i get the connection error message.Can someone please help m

I've tried to download the flash player several different times and each time i get a connection error message.It downloads fine and when i run the file to start install, it installs up to 5% and then i get the connection error message. I've tried disabling my antivirus software, closing my browser for install and nothing.Can someone please help me? I'm using Firefox.

Hi!
I had the exact same issue, being on a mac. If you are on a mac and the connection error message occurs, then use this link http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
It allows you to download it offline, which is what I used.
Hope I was help!
-Haroon

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

I can't upload our packaged app. Each time I attempt to upload the zip file the system uploads it and then it gets stuck on the "validating .....zip" part. :(

Similar Messages

Maybe you are looking for