I can't use facetime on my ipod touch....it says can't connect to the face time server. Anyone else have this problem?
I can't get facetime to load on my ipod touch. It says unable to connect to facetime server. Anyone else have this issue? Any suggestions??
i bought my daughter an ipod touch and i can not connect facetime from my iphone 4. i get a picture on both but the one that's calling continues to ring and says connecting. is this a firewall issue?
Similar Messages
-
Hi, at the moment I can only seem to watch a rented movie once - previously I used to be able to watch it as many times as I liked during the 48hr window. Anyone else have this problem?
This doesn't seem right.
I paid for a rental and downloaded an HD movie, Avatar. I could start watching within about a minute, it played without skipping a beat.
My wife started watching the movie the next night and got about half way through.
The next day, she tried watching the rest, and selected the film and clicked on "resume watching".
But instead of streaming and playing like it should, we got the spinning wheel of death followed by a message "Ready to play in 1 minute" which soon became "Ready to play in 2351 minutes"!
Additional information that I can add is that it was Sunday afternoon which is peak time for internet usage and I'd just exhausted my data allowance before the speed limiting kicks in. Basic internet using browsers at that time was really slow.
So it was as though the movie we were going to resume watching was going to be downloaded from the iTunes Store again, and since my connection had been speed limited, it was going to take forever. I thought you downloaded a rental to your hard drive and it deleted itself after it expired? So any subsequent streaming to AppleTV would be coming direct from your hard drive. It shouldn't have been affected by the speed of my internet connection at that time, surely. Anyone else experienced this?
Actually, I just noticed this post, I'm sure it's related...:http://discussions.apple.com/thread.jspa?messageID=12398832� -
I did the recent update on my ipad 7.0.4 and now it keeps freezing up and can not use it. Tried reboot and works for a second then freezes right up again. Anyone else have this issue or know a fix?
Madmonkey,
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Gaylefromnewhope,
Seems like you tried this all ready and it didn't help.
Next might be to reset all settings.
Settings > General > Reset > Reset all Settings
Note that when you do this you will not lose data but you will have to enter all passwords again.
If that doesn't help you might tries a restore of your iPad using iTunes on the computer you normall sync with. Do a backup and save all data first. Or
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
Whenever I use the dictaphone in ios7, I loose the lockscreen image, does anyone else have this problem?
Same problem on im iPhone4 / iOS6 with normal camera!
The camera takes a picture but the picture (video) doesnt appear in my Photos and therefore is not saved! -
Firefox is crashing every time I have my MSN email account up. (Since I use it for business, that's many times per day.) It seems to coincide with hotmail's latest update where the email is checked and downloaded to the inbox automatically. Then when it asks me if I want to send the crash report to Firefox, I select yes and it tells me it had trouble sending the report. Is anyone else having this problem? Is there a setting I can change? I can't seem to keep my email account up for more than 10 minutes.
p.s if you're reading this Microsoft, it's still not bad enough to make me to go back to Internet Explorer!Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple menu (top left in your screen) then click: Software Update ...
Carolyn -
since this afternoon i can't use any of my apps on my iPhone it keeps asking me to log onto iTunes so i log on to iTunes and it just sends me straight back to log onto iTunes so tried to log onto iTunes on my mac and i have error code -50 anyone else had this issue
As per the Apple iCloud status page, they are having issues. Do not make changes at your end.
https://www.apple.com/support/systemstatus/
Edit -
My crash apprears before the browser opens and so i cannot submit the report with the built in tool.
Problem signature:
Problem Event Name: APPCRASH
Application Name: firefox.exe
Application Version: 2.0.0.4085
Application Timestamp: 4d77ab07
Fault Module Name: xfire_toucan64_44036.xll
Fault Module Version: 1.0.0.44036
Fault Module Timestamp: 4d685460
Exception Code: c0000005
Exception Offset: 00000000000065f6
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057
Additional Information 1: b7ec
Additional Information 2: b7ec39bb86f047f23e4546593c4d32e8
Additional Information 3: cbe3
Additional Information 4: cbe3f569a391f716bdc9010295cb018fI'm expreriencing the same conditions with the same environment. Windows 8, iTunes-64 11.1.2.32, iTunes Store with a processing bar up to 80 +/- and the POPUP MESSAGE OF "iTunes stopped working. The error ...."
I UNINSTALLED, iTUNES WITH NO POSITIVE RESULT. I CHECKED THE FIREWALL AND IS THE SAME DEFINITION AS THE PREVIOUS ITUNES VERSION.
My iTunes StoreS from my iPhones ARE OK.
I'm spending a lot of time of research for WINDOW'S iTUNE with no solutions.... -
my airplay from my MacBook Pro to my tv through my apple tv is fuzzy- it just started being fuzzy about 2 months ago- it used to be clear- anyone else have this problem? How can I fix it?
Hi freezebri,
The following steps may resolve your issue:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Selectbutton will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.
Hope this information helps ...
- Judy -
i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?
My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck! -
When i'm using facetime or skype video chat, the camera would work just fine for about 5-10mins and then it starts to blink and then just turns into a black screen. Does anyone else have this problem? HELP!
Try Resetting the PRAM
-
Can't use HT x 3 on Diamond board, anyone else have this problem?
No matter what I do I can't use the HT multiplier of 3, works fine at 4 and 5 but 3 just give me a no boot up. Anyone else have this problem?
Quote from: K6dude on 09-May-06, 00:05:39
Hi,
If your BIOS was based on version 5.XX then you might like to try version 1.9/3.9 as when I tried that BIOS 3x didn't work either....come to think of it, neither did a few other things!
In fact that BIOS you are using is one that I have not ever seen for the 7100 series, where did you get it? ...and are you sure it is for the SLi version of the board and not for the 7125/Ultra chipset?
Regards
K6dude
The Bios is available from the Diamond Club so its for my board. I have to date tried Bios V1.7, 1.9 1.A1 and 50C and none of them allowed me to use HT x 3.
Tiresmoke, would you mind sending me a pm of your settings? It may give me a clue as to what the problem may be. Cheers. -
My new IPad mini has poor wifi reception. It goes in and out. My IPod, Iphone4, Ipad1 and Ipad2 work fine. What can I do? Does anyone else have this problem?
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
I have an iphone 4, when I plug in headphones I can pick up music and only background sounds, but no voices. It happens on every video or movie I see, but music works perfectly fine. Did anyone else have this problem or was it just me? If not can anyone help me?
Hey there Srkupo,
It sounds like your vocal audio is not working with your headphones connected to your iPhone. I would start with the troubleshooting from the following article to help troubleshoot them named:
Resolve issues with iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/ts2634
Update your software
Install the latest version of iOS. You can see which version is on your iPhone by going to the About screen.
If the device doesn't update successfully, the issue might be with your device and not the accessory. Learn how to check your iPhone, iPad, or iPod touch.
Disconnect and inspect the accessory, then restart your device
Disconnect the accessory and turn it off, if possible.
Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
Try a different device
Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
Restore iPhone, iPad, or iPod touch
Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
If this does not resolve the issue could you elaborate on where you are listening to this content from to help isolate the issue?
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I cannot get scrabble to work on my ipod touch. It only works on my macbook. I've uploaded, deleted, reloaded and nothing seems to work. It asks for a password but will not let me in. Anyone else have this problem?
Hi BDAqua,
I can go to /System/Library/Frameworks/, but JavaVM.framework/Versions/A/JavaVM does not exist!
Hi Linc,
I have already downloaded that updater, and it says 'A newer version of this package is already installed' -
Don't know if it's sync or icloud but I have started getting thousands of ithmb files in my pictures library each day. I can't open them and I have to continually delete them. Anyone else have this problem?
Unfortunately... Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
However... Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Jessica Sanchez wrote:
I am installing itunes to a laptop and have not sync device to this lap. ...
Using a computer, other than the one you have regularily been Syncing and Backing up to, was the begining of your issue. -
I bought my iPhone on Friday and when I tried to use it to make a call (after I had left the store) the screen had turned green - as if a green filter had been placed over it. When I turned the phone sideways the color turned to magenta. Anyone else have this problem? I plan on exchanging the phone but can't get there until later this week.
Next time you post here, you might think about using a title and the provide your description below.
Maybe you are looking for
-
I have 3 songs waiting to download for 3 days. I am unable to swipe to delete and I have rebulit my itunes libary which did not remove the songs from my phone. What do I need to do to get rid of these songs?
-
Clipboard issue- Automatically copying content past into another system across the network.
Hi, I am facing issue related clipboard in all windows platform in our organization. Say example: Person A copying something from any application or browser in his system and when he is going to past into another apps(word file or text file) in the s
-
Doubt about Agent Inbox with ERMS and NON-ERMS
Hi All. We have configured both ERMS and NON-ERMS email receiving (to make some tests) and we verify that only the workitem generated by the NON-ERMS workflow (WS14000164) is shown in the IC Web Client Inbox. The workitem generated by the ERMS workfl
-
Generating Moving Average Price Report
We got a u2018Sales document Flow reportu2019 already in BW. But we got a new requirement where we need to create a u2018New Enhanced Sales Document Flow BW Reportu2019 which should include u2018Moving Average Priceu2019 as well. Have got 3 Infoset
-
Photoshop keeps crashing when saving
This is the event log for the crash. It crashes randomly and the user is working with small files and maybe a maximum of 10 layers if that. The issue usually comes up when trying to save a file.