I can´t use folders and sub folders in the screensaver now, whay´s that?

My problem is that since I install OS X Moutain Lion I only can choose one folder and doesn´t give me the option to mark olso sub folders. would you please tell me why you take that option that was so great to use?
thank you

Because Apple doesn't want you to have choices. They also remove many previously installed ones, apparently because they would work well with their retina displays. I restored those. File a bug report with Apple for lost functionality.

Similar Messages

  • Can we addnew partition and sub partition in the existing table in one shor

    can we addnew partition and sub partition in the existing table in one short

    nav wrote:
    can we addnew partition and sub partition in the existing table in one shortYes,
    You can and below is the example for Range-List partition
    ALTER TABLE <table_name>
       ADD PARTITION <partition_name> VALUES LESS THAN (<value>
          STORAGE (INITIAL 20K NEXT 20K) TABLESPACE <TS name> NOLOGGING
              SUBPARTITION Clause
              SUBPARTITION Clause
              SUBPARTITION Clause
              SUBPARTITION Clause
               );

  • Can I use conditional and advanced actions on the same button?

    I'm fairly new to Captivate, but come from a background of flash and am struggling to use Captivate to do some things I would have expected to be fairly simple and a normal requirement.
    I want to create a screen with a number of interactive objects, in this case pictures, that the learner clicks on to display a piece of text.
    On clicking the next picture the first piece of text is hidden and a second piece shown.
    There are 6 pictures/buttons that need to work this way.
    However I also want to assess whether all the buttons have been used, as we have to force the user to view the entire slide before they continue.
    I can do the hide/show of text and buttons, and I've written a conditional action to check the variables for each button. However I don't know how/when to call this action.
    I was hoping that in my advanced action for each button I could add in a call to the conditional 'check variables' action, which would nicely fulfil this requirement, however this doesn't seem to be the case.
    I have also got animation/effects on the timeline before the images are on screen meaning I don't want to go back to the start of the timeline to use a 'on enter' event.
    I'm surprised this isn't something more people need as although it may be frowned upon out in the e-learning field, disabled navigation is frankly not going away and working for any large corporation will be a must.
    If anyone can shed some light on this, or maybe suggest a better approach then I would appreciate it.
    Thanks.

    Hi Lilybiri,
    Thank you for this, I suspected that this was going to be the way I would have to progress.
    I have to ask though, at present the company I work for uses a very straight forward off the shelf WYSIWYG elearning content designer.
    One of the core template pages is a hotspot page, which works in the way I have explained at the top.
    This is also one of the standard e-learning pages I have used in all my other positions, including when building in Flash.
    It seems incredible to me that to do such a simple, commonly used, page type we will require what is a fairly involved process rather than this being one of the page types or templates.
    I am currently trying to pilot Captivate to show how much better it is to the current product, however the other designers have no programming background and I think will stuggle with the conditional actions, meaning that this is pretty much going to be a no go which I'm gutted about...
    I think I stand a chance of teaching advanced actions but anything beyond that is unlikely initially.
    RodWard, thanks for your comments, I'm finding the actions ok in Captivate, as I say above I'm just amazed that this simple and commonly used page is so convoluted to create!
    My other frustration is the lack of control of the events, not being able to specify x and y for motions etc. but I'm finding work arounds...
    Is there a way to create my own page template? Could I write all the actions and bundle that into a page to provide the other designers so with some naming conventions they could use this functionality?
    Thanks for your help.
    Matt

  • Can I Use HDMI and Thunderbolt Outputs At The Same Time? And Mac App Store Issues

    I have a Mid-2011 Mac Mini. I am currently using the HDMI output with an HDMI to Digital Input for a dell monitor. If I wanted to have a second monitor, can I use the Thunderbolt output with a MiniDisplayport to VGA adapter? I know it may sound a little unclear, so if you need a clarification, pelase let me know.
    Also, on the same macine, I am having trouble connecting to the Mac App Store. My internet connection is working, and I've tried going into the Keychain Access and there isn't anything with a blue plus. When I go to Store --> Sign In , the sign in widnow doesn't appear.
    Thanks
    Joey

    Yes, that is exactly how to use dual monitors.
    Optionally:
    if the second monitor has DVI input, use the MiniDisplay Port to DVI adapter.
    or if it has Display Port input, then all you need is a straight MiniDisplay Port to Display Port cable.
    In Quick Links try Account if Sign In does not work.

  • Can I use "g" and "n" AXs at the same time for Airtunes?

    Hi, hope someone can help with this.
    I currently have a wireless "g" network made up of a Netgear DG834PN router handling DHCP and with wireless off, an AEBS "n" as a wirelss base station and 4 AXs (2 "g" and 2"n") doing extended wireless and airtunes to different rooms around the house.
    If I use the Netgear for the "g" wifi and the AEBS for an "n" network and then set up the two "g" AXs on the "g" network and the two "n" AXs on the "n" network, but all still plugged into remote speakers will all the AXs still appear in my iTunes remote speaker list?
    Also, will I still be able to control them all from the Remote app on my 1st gen iPod touch connected to the "g" network?
    I seem to have built a bit of a monster here but it works fine as is. I'd just like to know if I can get a seperate "n" network going without losing any of my airtunes functionality.
    Thanks

    If I use the Netgear for the "g" wifi and the AEBS for an "n" network and then set up the two "g" AXs on the "g" network and the two "n" AXs on the "n" network, but all still plugged into remote speakers will all the AXs still appear in my iTunes remote speaker list?
    Yes, just like any network resource they should be available.
    Also, will I still be able to control them all from the Remote app on my 1st gen iPod touch connected to the "g" network?
    The app on your iPod controls iTunes on your computer streaming the music, so yes you would be able to control them all because you are controlling iTunes.

  • HT4623 my iPhone 5 is frozen while I was updating with iTunes.  Can not use phone and is stuck on the iTunes and USB screen.  How do you fix it?

    I can not use the phone at all.  It is frozen on the iTunes and USB screen.  iTunes is not recognizing the phone as connected either. What do I need to do to fix it.

    Open iTunes on computer. Connect iPhone to computer with Lightning Cable. Hold both home and power buttons for about 20 seconds until iTunes recognizes the iPhone in Recovery Mode. Click the Restore button of iTunes. If there are any problems with this, you have 1 year Warranty with Apple. Make Genius reservation or set up service and take or send to Apple for resolution.

  • Can I use CS3 and CS6 both on the same Mac?

    Hello
    I just purchased the upgrade from CS3 ti CS6 web and design premium MLP TLP.
    Before to install I need to know if I can use both CS on the same Mac, to avoid problems with old files and be sure I could work.
    Also I need to know if I can install CS6 on the two Mac internal hard drives, one with Snow Leopard MacOS (10.6.8) and one with the Lion MacOS (10.7.x). In some cases I must use Snow Leopard for compatibility issue with other software.
    Thanks a lot

    Installing on two partitions uses two activations, but can be done with no issue. There is no issue on running CS3 and CS6 on the same Mac. However, there is no guarentee that running CS3 on a newer machine will be totally error free. But I think for the most part you should be ok on Snow Leopard.

  • Can't use gestures and shortcuts when on the mail application

    When mail is open and in the foreground (so says 'mail' in the finder bar), the normal shortcuts and gestures that switch desktop, open expose, open launchpad, clear to desktop, etc... simply dont work. Is anyone else having this problem, I find it frustrating that on such an advanced OS I have to click on a window behind before using these commands or select whatever i want from the dock/applications folder.

    Works for me,in mail double mouse tap and go launchpad,or swipe between desktops or expose or dashboard ..

  • Can i use bluetooth and standard headphones at the same time?

    I would like to be able to use my bluetooth headset and have a line out of my iphone using the headphone output.  is this possible?  i seem to only be able to select one or another.
    thanks

    No, it's not possible... sound output is one or the other.

  • Can I use FaceTime and other apps at the same time

    I want my kids to read a book using one ap while they talk to their grandma on FaceTime. Is there a way to do this?

    No. Just talk to grandma. Read a book when she's not available.
     Cheers, Tom

  • Can i use my old IPOD dock with the new G5 IPOD?

    Can i use my old IPOD dock with the new G5 IPOD?

    That's really good to know. I thought because it was a different thickness you wouldn't be able to, and the dock adaptor that comes with the new iPods doesn't fit into the old Photo dock.
    Do you know if you can use the charger that came with the old Photo iPods? You can plug straight into the power socket, but the cable that goes into the charger from the iPod is the firewire cable, so I was thinking maybe it wouldn't work, and I don't want to try it in case I short out my iPod or something!

  • Data types used in a sub VI - selecting the correct input and output types?

    data types used in a sub VI - selecting the correct input and output types?
    I can never work out how to choose an input or output format for Subvi's.
    I want to create a SubVI for the code in red. I needs an VI Server Reference compatible input and an output that goes to  a waveform.
    Thanks in advance.
    Attachments:
    data types.PNG ‏11 KB

    GerdW,
    I realise now I have taken us in the wrong direction. apologies for that.
    History, this is not my code and I do not own the process and NOT my preferred method of using it. I was looking for a simple way to make subtle changes.
    What we do - We use these programs to collect data from typically 6 pressures and 6 temperature probes and capture RS232 / USB VISA strings from sensors.
    So every few weeks / months or up to a year we rearrange each sensor location to suit the new process. I did not write the code. I cannot change the procedure too much without resistance.
    So headers in the CSV file have the DaqMX string passed through the code. Great.
    Other data to the CSV file comes from calculations or extracted from the VISA string. Hence why we have headers with "Untitled 1 ()". These values also go to a History Chart.
    So I was looking for a simple way to read the the local variable label as it is always linked to the front page indicator. People can cope with editing the indicator label, save the VI and hit run.
    TL;DR - GerdW is now a psychologist.
    Attachments:
    data to csv and history chart.png ‏1043 KB

  • How can I use OmniPortlet and Web Clipping Portlet?

    How can I use OmniPortlet and Web Clipping Portlet?

    You find information on OmniPortlet and Web Clipping in the Portal Developer's Guide.
    o Building Portlets with OmniPortlet
    o Building Content-Based Portlets with Web Clipping
    Peter

  • How can I use excel and word on the IPAD2

    How can I use excel and word documents on my Ipad 2

    There are apps such as Documents To Go which support reading/editting/creating those sorts of documents :
    standard version  -  http://itunes.apple.com/us/app/documents-to-go-office-suite/id317117961?mt=8
    premium version  -  http://itunes.apple.com/us/app/documents-to-go-premium-office/id317107309?mt=8

  • Macbook pro keeps saying connection timeout, and it used to connect to the internet fine. what's up, why can't it find and automatically connect to the internet anymore???

    Macbook Pro keeps saying connection timeout and it used to connect to the internet fine. What's up, why can't it find and automatically connect to the internet anymore???

    Like this: https://discussions.apple.com/thread/2775868?tstart=0  ?

Maybe you are looking for