I can't use my back and forward cursor, how do I make them work?

My forward and back cursors are not enabled.
== This happened ==
Just once or twice
== My firefox shut down

Go to '''View--Toolbars''' and make sure '''Navigation Toolbar has a checkmark next to it.
If you do not have the menu bar either, press '''ALT V T M__ to get your menu bar back

Similar Messages

  • Thinkpad Yoga and UP710E stylus, how do you make them work together?

    So my work just got me a Thinkpad Yoga as per my request
    I have confirmed that in the Device Manager I do see: "HID-compliant touch screen"
    I have also gone out on my own and purchased the UP710E wacom stylus, as suggested at various points on this board and on other sites, as something that should work with the Yoga
    I've also purchased Manga Studios as an art program that is supported on this device (it seems to run fine) and with the pen.
    I turned on Manga Studios (and MSPaint for good measure), pressed pen to screen and... nothing.  Eraser to screen.. nothing.  Mouse?  Works fine.  Stylus that everything and everyone indicated should work?  Nope.
    So.... what am I missing?  Is there a driver I should be looking at?  Everything should be up to date.. some in-between program I need to install?  Try this when the wind is blowing south by southwest?
    Help please?
    Solved!
    Go to Solution.

    Thanks.
    Here's how the support site describes your MTM:
    i5-4300U(2.9GHz), 4GB RAM, 500GB 5400rpm HD, 12.5in 1366x768 LCD, Intel HD Graphics,
    Wireless Option, Bluetooth, UltraNav, Secure Chip, 8c Li-Poly, Win8.1 Pro 64
    I'll defer to others who might know definitively, but it's my understanding that the 1366x768 LCDs are not Wacom digitizer-equipped, whereas the FHD panels are. That would be one possibility for what you're seeing.
    Regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Graphical modeler error while using the back and forward buttons on the CRM

    Dear Gurus,
    Have issue with segmentation graphical builder in CRM 7.0. The issue is When you are in graphical modeler and try to go back and come forward again using CRM back and forward buttons the graphical modeler is giving error. I am using the following steps.
    1) Log on to marketing professional role
    2) go to create new segmentation
    3) enter the profile name and save
    4) click on graphical modeler
    5) Able to see the graphical modeler
    6) Click on back button on the top right hand corner (CRM back button)
    7) system takes me to profile creation
    8) click on forward button on the top right hand corner (CRM forward button)
    9) unable to see the graphical modeler - giving error
    Please guide me how to fix this issue.
    Regards,
    Niranjan

    Hi,
    Please apply the manual steps given in SAP note 1614524 and retest the issue.
    Also make sure your JRE version is 1.6_19 or higher.
    Hope this helps.
    Regards,
    Anup

  • When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified.  Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

    When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified.  Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

    The only limit is that of the device. No restrictions on how much of it you can use for music. Is part of your music library unchecked?
    tt2

  • I have pages and keynote on my iPad, how to i make them work on mac air i have bought later

    i have Pages and Keynote, and others of course, on my iPad, how to i make them work on mac air i have bought recently ?

    Welcome to Apple Support Communities
    The iPad uses iOS, and your MacBook Air uses OS X, which are different operating systems with different apps.
    iWork apps (Keynote, Pages and Numbers) have got two version: for OS X and for iOS. You already purchased Keynote and Pages for iOS, so you can install them in all your iPhones, iPads and iPods touch for free, but not in the MacBook Air, because the iOS version isn't supported. You have to buy Keynote and Pages for OS X in the Mac App Store for your MacBook Air.
    To access to the Mac App Store, press its icon in the Dock or go to  > App Store

  • How can I activate the back and forward gestue with an Alps Touchpad in firefox 5 an 6. In Firefox 3.6 it already runs.

    I have Windows 7 64 bit
    Firefox 6
    in about config is the Gesture back and forward activated
    I have an Acer Notebook with Alps Touchpad.
    In Firefox 3.6 the Gesture funktion already runs

    You can't run Firefox 3 versions on Windows 98.
    Firefox 2.0.0.20 is the last release that runs on the Windows 98 and Windows ME platform.
    * https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/win32/en-US/
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    * http://www.mozilla.com/firefox/3.6/system-requirements/
    * http://www.mozilla.com/firefox/3.5/system-requirements/
    * http://kb.mozillazine.org/Unsupported_operating_systems

  • Navigation "Back" and "Forward" buttons are inactive, they do not work at all. How do I fix this?

    I have downloaded the latest version of firefox and the navigation buttons in the browser will not work in any way. The "Back" and "Forward" buttons are completely un-usable.

    Toolbar misbehavior could be due to a problematic add-on (e.g., theme or extension), or a corrupted settings file. Next time you upgrade -- and for security reasons, it is highly recommended -- try Firefox's Safe Mode to see whether you can pin it on an add-on or custom setting. You also could clear your toolbar settings.
    More info on Safe Mode:
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.org/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, restart Firefox in [http://support.mozilla.org/kb/Safe+Mode Safe Mode] using
    Help > Restart with Add-ons Disabled
    In the Safe Mode dialog, do not check any boxes, just click "Continue in Safe Mode."
    Does the toolbar work correctly?
    More info on clearing toolbar settings: [[Toolbar keeps resetting]]

  • The back and forward buttons on Logitech mouse don't work

    My logitech performance MX back and forward buttons don't work. I tried in safe mode and they still don't work. I tried creating a custom shortcut in logitech setpoint and that didn't work either. I tried using the native mouse driver and not logitech. No luck.
    I really like this functionality. Is there a way to enable these buttons?

    Hi mike,
    i'm not sure if this will help but how about this add-on called "Vimperator". It is easy to use and works like vim. (Try this as an alternate till we figure out the problem) :)
    Hope that helped.

  • I dont have the awsome bar or the home and i also dont have the back and forword buttons how would i get them back?

    ''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/794662]''
    i dont the a sarch bar or the back button or forward buttons how do i get them back

    * In Firefox 3.6 versions on Windows and Firefox 4 on Windows and Linux it's possible to hide the "Menu Bar" via "View > Toolbars" or via the right-click context menu of a toolbar.
    * Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
    * Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
    See also:
    * [[Menu bar is missing]]
    * http://kb.mozillazine.org/Toolbar_customization

  • I have a dvr and I want to monitor from my phone.  this worked when I had a Belkin router that let me open ports.  I use "canyouseeme" and it can't see 80, 9000 or 1025. How do I make them available?

    I have a Lorex DVR that I want to monitor from my IPhone and IPad.  I used to be able to do this when I had a Belkin router (easy to open ports) but I bought the AirPort Extreme router and no longer have that capability.  When I use "canyouseeme" they can NOT see 80, 9000 or 1025.  Lorex says I need them all available in order to access.  Help!  And all the help I see refers to a earlier version of the AirPort Utility so I cant use those to look at anything, I cant find the same screens, I have version 6.1 (610.31).  I also don't really understand how ports work, so I need a pretty basic explanation.

    Well...I went to the modem (Westell, WireSpeed), found the NAT settings, once again, I'm WAY over my head, I am assuming this is a TCP connection (as opposed to a UDP) and per Lorex my mobile devices will use port 1025.  So I gave it a "global port range" of 1-10 and I indicated that the "base host port" was 80, 1025, & 9000 (ports 1,2,3).  When I selected the 'enable' it asked for a "host devise" my choices are my IPhone, IMac and the IP address for the dvr, so I choose the dvr.  I still cannot connect and canyouseeme still can NOT find these open ports.  This is taking up my whole day! I don't know how people figure this stuff out.

  • Safari and VLC -- how do I make them work together?

    I installed VLC on my Mac Pro and I want to use VLC to play streaming content. I think the link I'm clicking on is Adobe Flash content that then opens another program to play the MMS stream.
    Quicktime Player can't handle the stream and when I click on the link now the computer starts Parallels and tries to launch Windows Media Player from a virtual machine, which also can't handle the stream. I know that the VLC client can handle the stream because it works great on my Macbook Pro.
    I don't know how to change the necessary file/stream associations so that Safari/Adobe launch VLC to play the stream instead of either Quicktime or Windows Media Player. Also, because it is a stream launched from flash content I can't just open it in the Finder and change the application association.
    I found a workaround by creating a new .ASF file and then opening that with Finder to "change all" and associate ASF with the VLC client, but there must be an easier way.
    What is the easiest way to do this?
    - Mike

    HI,
    Might be a bug related to this..
    http://wiki.videolan.org/Flash_Video
    Carolyn

  • Basic voltage measurement, with Meter, Relay, and Load. How do I make it work?

    Hello,
    I have LV2010, and I am controlling a Meter, Relay, and Load.
    Here is what I need.  Please give me any crazy idea that you can think of to explain why this will work all day and then after shift change it hangs, and locks repeatedly.
    I have looked at our LAN, and Server usage.  The second shift operator likes to wear nitrile gloves so we asked that he take them off and that seamed to help but didn't solve it.  I have stood and watched both operators and their methods seam to be the same.  I can operate the test for a dozen cycles and it is perfect, then he takes over and it locks on the second cycle.
    The program is very simple with a loop that calls the subvi for the equipment and then records the data for a service to push to the server.
    So after you laugh at what a poor post this is, please give me any off the wall idea you have because it isn't making any sense to me.
    Thanks,
    Ben P.

    tbob wrote:
    But I would like to throw out one suggestion.  You have a lot of blank space in your block diagram.  You have to scroll across the screen a whole lot.  This makes it hard to look at the code and to understand what it does.  Make it easier for others to read by eliminating the blank space and moving objects closer together.  I have two monitors side by side and I still can't see all the code without scrolling.
    Something is wrong with that block diagram (looking at OCV-CCV.vi).  I ran the block diagram cleanup on it, and it stretches out a lot of structures very wide even when they hardly have any code in them.
    It would be good if someone from NI can look at that VI and see if they get the same results and figure out why the cleanup tool is failing on this one.
    Ben P, you are missing alot of subVI's and typedefs.  You may want to create a source distribution and upload a zip file of that so we can see all the files.
    Look at the event structure in your Wait Case.  You have a Run:Value change event and Change Info:Value change event.  Both of those have their event properties set to lock front panel until event completes, but yet the event may not complete right away since the event structure is inside your state machine in a case that may not be up for execution right away.

  • My Back and Forward buttons are present but do not work. How do it fix?

    I have tried several fixes to no avail. The buttons worked until recently. Not sure when exactly they stopped.

    Back/Forward Home don't work in 7.0.1 due to '''network.http.max-connection'''s being upped to 256, reduce back down to 32.
    *https://support.mozilla.com/questions/889087
    Back button problems -- right-click on tab for tab history, or hold a couple of seconds for tab history, or install an extension
    * "'''Back/forward dropmarker'''" Extension<br>https://addons.mozilla.org/firefox/addon/backforward-dropmarker/
    Extensions that may '''interfere with Back Button''', and these are already listed in [http://kb.mozillazine.org/Problematic_extensions Problematic extensions] for other reasons
    *McAfee Site Advisor see [https://support.mozilla.com/questions/805964 805964] (update perhaps 3rd week July 2011)
    *Yahoo Toolbar (https://support.mozilla.com/questions/845691)
    Back/Forward: navigation/buttons are disabled -- http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
    Back/Forward: buttons missing -- http://kb.mozillazine.org/Corrupt_localstore.rdf
    see more complete answer in https://support.mozilla.com/questions/851574

  • I can't scroll by hitting the space bar, or clicking on the scroll bar itself, or even use the scroll arrows- how do I make them work again?

    I wake up, unhibernate my laptop and suddenly I can't scroll by hitting the space bar, or clicking on the scroll bar itself, or even use the scroll arrows. In other programs it works fine. What happened and how do I fix this?

    You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing].<br />
    You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
    See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    * Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
    You can press Ctrl + L to go to the location bar.

  • The address bar and search bar do not function(no plugins/addons). How do i make them work?

    I recently updated firefox and have a problem similar to what others have posted here. When typing a URL in the address bar and hitting enter there is no response. The major difference is I do not have any plugins or add ons or new themes. I ran combofix and found no virus. I uninstalled then reinstall FF. Didn't work. Then i went into registry and manually removed all FF files and reinstalled. Didn't work. I am currently using chrome and would be happy to come back to FF if it starts to work again. Any ideas guys?
    Thanks!

    Try:
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    You can try to check and repair the places database with this extension:
    *https://addons.mozilla.org/firefox/addon/places-maintenance/
    You can still try Safe mode to check for other causes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Try to create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Maybe you are looking for