I can't use Parallels Desktop after I installed Lion

Every time I try to start Parallels Desktop I get an error message about "no driver found" and "start your mac again".

Thank's for the response.
I'm running version 5 of Parallels and that's obvious causing the problem. I will upgrade to version 7 and see if that solves the problem.
Thanks,
Bjorn

Similar Messages

Can't use parallels desktop ver.7 after installed OS X Mountain Lion

Dear All
Everyone has solution to fix this issue ? I can't use the parallets desktop ver.7 after installed os x mountain lion.
Please advice.
Thanks & regards

Hi,
Make sure you have the most current build of Parallels 7 - it works well fro me, and the other poster, so unless you have some lind of issue internally, it should work for you.
Try doing a repair permissions from Disk Utility. I needed to do that to get Quicken Essentials to work.
Cheers,
M.

Can 2 gb ram on 2.4GHz run windows 7 using parallell desktop

If I buy the new 13 inches 2.4GHz with 2GB RAM, is it enough to run Windows seven using Parallel Desktop or should I have 4GB of RAM?
Thank you

When running a virtual machine such as Parallel you'd be better off running as much memory in the Book that you can afford. 4GB should be enough but 2GB you may find a little troublesome.
Also look into Sun's "Virual Box" it is a free VM. Not as many bells and whistles as Parallels but work very well.
http://www.virtualbox.org/

Can't Uninstall Parallels Desktop, Need Help.

I have stopped using Parallels Desktop and decided to uninstall it using the provided uninstaller. This however didn't get rid of the Kernel service so I used the sudo commands they say to use. However this still did not get rid of the services that are running despite the fact I have done all I can to remove it. How can I get rid of this program as its really bugging me.
Thanks

Yer I ran those sudo commands but I can't seem to get it to stop working. After a restart the console always has Parallels updates and the virtual networks keep remaking themselfs.

Keyboard error with '@' when in WindowsXP (using Parallels Desktop for Mac)

When I go to type '@' when in WindowsXP (using Parallels Desktop for Mac) the symbol ' " ' appears; I have to type ' " ' to achieve the ' @ ' symbols. Can anyone help?

Try switching the keyboard layout in XP to other countries. Maybe US from UK.

Windows XP iTunes won't launch (using Parallels Desktop 4.0)

After installing latest version it won't launch at all.
I get an alert with a red cross that says:
"The itunes application could not be opened. You do not have enough access privileges for this operation"
I am using Parallels Desktop 4.0, with Windows XP SP2.
I've uninstalled all iTunes files, and reinstalled. Still nothing.
Before the update, iTunes would launch, but it said that the library couldn't be used because of access privileges.
Someone please help...

I get the error message "itunes.exe has caused errors in windows. Error log created. Windows will now close." I've tried fixing iTunes using the "repair" option in itunes.exe, uninstalling and reinstalling both QuickTime and iTunes, and am now out of options.
Help, please!

T60p, can't go to desktop after the Windows Logo, only the cursor stays here and can move[pic]

My Thinkpad T60p can't go to desktop after the Windows logo, it has fingerprint, but never appears, only the cursor stays here and can move, the back ground is not black, nothing happens pressing Ctrl+Alt+Del or Win button.
Can go to safe mode but the same situation, the cursor is here, black background, nothing happens pressing Ctrl+Alt+Del or Win button.
After a long time of searching I guess the very most possible reason is system updating many patches guided by a software that lead me did that.
Thanks!
Dan
Link to image
Moderator note: images totalling more than 50k converted to links per forum rules: Lenovo Community Participation Rules

If I was given this laptop to diagnose the first thing I would do is swap in another harddrive and confirm all the hardware works. If you don't have another drive to boot from you can use a Linux live-cd, it'll pretty much tell you the same thing and if the laptop works, your solution would be to either fix your operating system or reformat and start over with a new installation.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Macbook lag when using Parallel Desktop

I always use Parallel Desktop since when college portal website only can be accessed by Internet Explorer, so I installed Windows Xp. The thing is it really uses a lot my RAM memory, only 20 MB of Ram is free. In Parallel Desktop configuration, I have changed the RAM slot for virtual machine, I just allocated 1064 MB Ram, and it ticked for " the best performance" or in other words I let the processor to do the adjust automatically so my Macbook can run at its best performance. I have also changed the processor in virtual machine to 2(dual-core) but still my macbook lags when I run Parallel Desktop. My HDD is 160GB and I have occupied more than of it, like 60 GB left. I have a lot of vital programs so I wonder if this thing is a major cause of this lagging problem. Any advice what should I do to speed up my macbook performance back?

If you want your Mac to run better, turn Parallels down to 1 core and bump the ram down to 512Mb. Having the RAM up high and the cores up high will allow Parallels to grab more of the resources, thus slowing down the whole computer. Limit parallels to less, you shouldn't give it 50% or more of your machine unless all you do is Window stuff.
Check your graphics config too, if your not playing games in Parallels, turn off 3D graphics and only give it 16 or 32Mb VRAM.

Cannot see html pages LOCALLY STORED on Mac drive, using Parallels Desktop?

Using Parallels Desktop running Windows XP, I cannot use Safari 3 to view HTML files stored on my Mac - no matter how I try!
If I locate the file within Windows Explorer and I right-click and choose "Open With > Safari Web Browser" Safari will open, but it will only open a blank window and nothing loads (the Status Bar remains blank).
If I open Safari and choose "Open File..." and navigate to the file on my Mac and click "Open" I get an error message which states:
Safari can’t open the page “file://.PSF/Macintosh%20HD/..."
etc.
Note that the URL it is trying to open begins with:
“file://.PSF/"
whereas doing the same thing from within Internet Explorer shows the URL to begin with:
"\\.PSF\"
without the "file" part. Also notice the BACKslashes, rather than FORWARDslashes.
Lastly, trying to open a blank Safari window and drag-and-drop the HTML file from Windows Explorer directly into the Safari window results in exactly the same problem.
Note that ALL 3 of the above-mentioned methods DO work in Internet Explorer.
Finally, even copying-and-pasting the local URL that DOES work in IE into Safari's Address Bar doesn't work either. The problem this time is that not only does Safari turn all the backslashes into forwardslashes, but it also adds "http:" to the beginning of the URL, when it was not in the originally-copied link, which began with "\\.PSF\".

Again, thanks for taking the time to reply - but you're really really not paying attention to what I'm saying...
I AM giving Safari the full pathname, but when using Parallels Desktop, this full pathname begins with "\\.PSF\". That's how it starts. Nothing else before the two backslashes, OK. That's how it works in Internet Explorer when using Parallels Desktop. That's how it works in Windows Explorer when using Parallels Desktop.
I have given Safari the full pathname in FOUR different ways, as I mentioned in my original post: right-click, open with / file>open / drag-and-drop / copy-paste-URL.
With regards to my particular issue, I'm not concerned about how it works when using Windows running natively on a "proper" Windows PC. I am concerned about how it works when using Parallels Desktop.
If you really want to know the full URL (not that it matters one jot) of an example file that I can open with Internet Explorer, but not with Safari, here's the URL of the file I was originally trying to test:
\\.PSF\Macintosh%20HD\Work\Downie\Website\HTML\index.html
That's it. Everything is there. I have not left off anything at the beginning of that URL.
That's how it works in Internet Explorer when using Parallels Desktop. OK, re-read that. It works in Internet Explorer when using Parallels Desktop.
When I copy that URL exactly as it is, and paste it into Safari and hit return, Safari automatically converts it to:
http://.psf/Macintosh%20HD/Work/Downie/Website/HTML/index.html
Note how it has altered it in several respects:
- It has added "http:" to the beginning of the URL.
- It has turned the original "PSF" into a lower-case "psf".
- It has turned all the backslashes into forwardslashes.
I try manually deleting and altering the relevant parts and hitting return again, but Safari just goes back to the "wrong URL".
When you say "the only prefix for local files is file://" you are obviously not familiar with how Parallels Desktop works with and reads "local files".
Remember what I said earlier about how you're not REALLY looking at LOCAL files, because TRUE local files would be on the Windows section of the drive, and I am trying to look at files on the Mac part of the drive.
I'll repeat what I said earlier:
If you are not testing this from within Parallels Desktop like I am, and where I am having the problems, then your words here are not of much use, because you cannot experience what I am experiencing. You cannot comment on the experience on how this works from within Parallels Desktop if you do not have Parallels Desktop and have not experienced it yourself.

Can we use XSLT mapping after graphical Mapping

Hi,
Can we use XSLT mapping after graphical mapping?
My requirement is to generate two namespace attributes in the target output.
So first I want to generate a structure using graphical mapping and then want to use XSLT mapping only to generate the second namespace XSI (leaving the rest of the structure as it is). Is it possible?
<ns1:Test xmlns:ns1="wmdata.dwbi.interface" xsi:schemaLocation="wmdata.dwbi.interface w_interface_1.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
Please post some solution. (I will reward points)
Br,
Madan Agrawal

Hi Madan,
Can we use XSLT mapping after graphical mapping?
To me it seems feasible...
But to using the two mappings one after another you will have to use BPM .
Use transformation step for this to use the mapping and change in structure.
Regards,

How can I use the desktop gmail instead of mobile?

How can I use the desktop gmail on iPad2 -
instead of the mobile version or app?

Scroll all the way to the bottom of the screen in the mobile site. There is (or at least there used to be) a link to the standard site.
Really, though, the experience through the Gmail app is much better.
Best of luck.

Can u use this desktop as a tv also

can u use this desktop as a tv also

Yes, but not without some extra add-ons.
Try EyeTV. It can give your Mac an antenna and find nearby tv networks. You can also plug in game consoles etc and play them through the Mac.
http://www.elgato.com/

I can't use Lr5.6 after update Lr5.5 to Lr5.6

i can't use Lr5.6 after update Lr5.5 to Lr5.6 and Now it ask me serial number or 30day
Please help me Thank u so much

If you are running the LR 5 from Creative Cloud Photography Program, then try the procedure outlined, here:
https://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html
If you are running LR5 as a standalone serial-number-licensed version, then enter your serial number, again.

Using CS5.5 Master Collection for MAC, I can't use "Replace with After Effects composition"

Using CS5.5 Master Collection for MAC, I can't use "Replace with After Effects composition" because I updated AE to CS6 (but only AE). Even that AE CS 5.5 is still installed, it won't connetct.
How can that be fixed?
Thanks a lot for any suggestions.

Thanks for the answer: I tried different ways (after I read your suggestion) but it always changes back right away ... I can't change it.
Am 16.01.2013 um 03:04 schrieb Jim Simon:
Re: Using CS5.5 Master Collection for MAC, I can't use "Replace with After Effects composition"
created by Jim Simon in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
Maybe try associating AE project files with 5.5 instead of 6.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4997081#4997081
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4997081#4997081
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4997081#4997081. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I can't use the wifi after 10 pm, but i can use it again at 7 am?

so for some reason, i can't use my wifi after 10 pm. but in the morning when i wake up, i can use it again. is this some parental control or something? please lead me through it. i can't really ask my parents to do it, because they're not technologically advanced. they can probably give me the basic like the password and all, but that's it. how can i fix it? i'm using the wifi on an ipod touch. the wifi works perfectly fine on a regular computer but it doesn't work on my ipod during those certain hours. can someone please help me?
the wifi icon shows up in the upper left corner, but its obviously not connected. there are no restrictions on the ipod at all.
any other details you need, please ask. i really need this solved!
Message was edited by: teedeexx

i'd definitely say it was a wifi thing rather than an ipod thing. as far as i can think of there would be no way to tell an ipod to only access the internet between 7am and 10pm. - unless you were to restrict it using the router (i imagine this COULD be possible, but don't know if it actually is).
everything which accesses the internet is given an individual 'mac address'. so if you have say, 3 computers, an ipod, a games console, all accessing a wifi network, that router will recognise them all individually by it's individual mac address. you can use mac filtering to give you an extra level of security to your network. so even if the correct network password is entered onto a wifi enabled piece of technology, if the router hasn't got the mac address entered as one that it should accept, you won't get access to the network.
i must reiterate, i don't know if you can do this, but i would think it may be possible to restrict a certain mac address from accessing the network at certain times of the day (for example a young kid who may be playing with their ipod in bed, but should really be asleep!)
if you go into the settings option on your ipod, general, restrictions, you can play around with your own restrictions and see what they do. mostly they restrict complete access, or the download of explicit content.

I can't use Parallels Desktop after I installed Lion

Similar Messages

Maybe you are looking for