I can't use the iCloud feature on Safari with Mountain Lion.
I updated to Mountain Lion but my iPad 3rd gen and my iPhone 4S will not update or use the iCloud function in Safari. It says it works on my computer, but the icon is not on my IOS devices. In the IOS 6 update info it says that iCloud web page sharing between devices would come out in fall, so why do I have it on my
computer then? If it is supposed to work just give me a sollution please, I just want it to work.
PS. My IOS devices says they are already up to date.
Thanks!
-Nick Auen
Please tell me that it has NEVER been jailbroke. If it has not been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.
Similar Messages
-
Can i use my older verison of office with mountain lion
Can I use my older verison of ms office with mountain lion
...or now:
If you are unable or unwilling to update to Office 2008 or 2011, you can install Snow Leopard Server (with Rosetta) into Parallels or VMWare Fusion and continue to use Office 2004 (and most other PowerPC applications) concurrently with Lion or Mt. Lion:
[click on image to enlarge]
Snow Leopard Server is now available from the Apple Store for $19.99 + sales tax & shipping: 1.800.MYAPPLE (1.800.692.7753). Apple Part Number: MC588Z/A -
Late 09 iMac. Can I use the new features in Yosemite with this platform?
I want to use handoff and other features, but I can't seem to get them to work. Is it because of the age of my iMac? if so will there be a work around for this?
In addition, if you use older iDevices, like iPad 2 or 3 or an iPhone 4 model, these DO NOT support iOS 8 Handoff or Continuity features, either.
-
how can i use the iCloud,i can't find the icon which should need i download
system preferences - internet & wireless section - iCloud
-
My icloud account is not verifying it says check my mail witch I have done and I get a message say your iPhone for has been used to set up and Icloud account but still can not use the icloud can anybody help me.
Be sure you are checking the email account that you used to set up the Apple ID you used to create the iCloud account. Also, be sure to check your spam/junk folder as well as your inbox. The email you should receive looks like the image below. When you get it, click the Verify Now link.
If it still isn't there, try going to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right look for a link to resend the verification email. -
Can i use the 'Record' feature in Applescript editor to automate bulk mail
Hi,
Is it possible to use the 'Record' feature of the Applescript editor to create a script that will automatically copy a website address into a new email message and then send that email message to everyone in my Friends category from the Address Book.
I want to do this because I want to alert my friends to changes on my website once a week, but I don't want to have to sit and type out the email and copy the website address and everything like that. So I was thinking I could do it with one click using Applescript.
Is that right and how dangerous is it. Like if i somehow manage to mess up the script can I just delete it and start again without causing any damage to my Mac
Thanks
JasonJayTelford wrote:
Hi,
Is it possible to use the 'Record' feature of the Applescript editor to create a script that will automatically copy a website address into a new email message and then send that email message to everyone in my Friends category from the Address Book.
I want to do this because I want to alert my friends to changes on my website once a week, but I don't want to have to sit and type out the email and copy the website address and everything like that. So I was thinking I could do it with one click using Applescript.
Is that right and how dangerous is it. Like if i somehow manage to mess up the script can I just delete it and start again without causing any damage to my Mac
Thanks
Jason
Perhaps I should make myself more clear what I want to do.
I want to do the following.
1: Open Mail
2: Create a new email message
3: Set the recipients from my contact group "Friends" so that everyone in my my 'Friends" contact group will receive the email
4: Set the subject as: "Check out these great new updates to my site"
4: Set the body of the mail message as follows:
Hi There,
Thanks to you all for subscribing to these updates. Here are this weeks updates from Jason's Online Mag. [website address]
Regards
Jason Telford
http;//web.me.com/jasongtelford
5: Send the email
Am I correct in thinking that I will need to use Automator and schedule the automation to run a script as per a weekly iCal event.
If this is correct, then how would I do that. Can I use the 'Record' feature of Automator and the Applescript Editor, to create the automation and the script. I am new to doing this kind of thing so I am unsure of the procedure for accomplishing the task I described above automatically.
Also I should apologise for not making my original post clearer.
Regards
Jason
Message was edited by: JayTelford> Corrected a spelling error -
i couldn't open new terms and conditions of icloud, and so i can't use the icloud on my device iphone 5, this problem appears, when I get new ios 7
Try download the Find My Friends app and signing in to accept the terms and conditions there.
-
I have a powerbook running on osx 10.5.8. can i use the icloud
i have a powerbook running on osx 10.5.8. can i use the icloud?
Hello, sealaw.
Thank you for visiting Apple Support Communities.
Here are the system requirements for using iCloud.
System requirements for iCloud
http://support.apple.com/kb/ht4759
Cheers,
Jason H. -
Can't use the panorama feature
Hi,
I just acquired PS 12 & wanted to build a panorama from a suite of photos.
I loaded the photos in the Expert Edit mode and then tried to open a new file of the panorama type, as shown in the video tutorial. But the only choice I have is "Empty File".
What is it I do wrong ?
Thanks for your help,
JayPeeMThank you: it works
Cheers,
Jean-Paul
Le 09/03/2014 22:31, nealeh a écrit :
>
Re: Can't use the panorama feature
created by nealeh <http://forums.adobe.com/people/nealeh> in
/Photoshop Elements/ - View the full discussion
<http://forums.adobe.com/message/6193656#6193656 -
Can I use the USB cable that came with my digital camera to conect camera to iPad by connecying the camera cable to the USB end of the iPad cable? I have a double ended USB connector if necessary.
No.
You need to use this.
http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter?fnod e=3a
or this
http://store.apple.com/us/product/MD822ZM/A/lightning-to-sd-card-camera-reader?f node=3a -
I have purchased iphone 4s for India from India. Can I use the same phone in usa with usa based sim
An unlocked phone is an unlocked phone, which is the same for the iPhone.
-
Can I use the iPone 3gs SIM Card with the iPad 2?
Can I use the iPone 3gs SIM Card with the iPad 2
The iPhone 3GS uses a full size SIM card.
The iPad uses a micro-SIM card. -
Can you use the 13-inch MacBook Pro with Retina display straight out of the box, or do you have to charge it up fully before you can use it. I do not want to damage the laptop by misusing the battery.
Attach the charger and start charging the battery to 100%. The good news is that after you have connected the charger, you may start using the MBP as well.
Ciao. -
Can I use the lightning to USB cord with any USB/AC adapter?
Just got a new IPhone 5. Can I use the lightning to USB cord with the AC adapter I had for my IPhone 4 (or any other USB to AC adapter)?
Yes I just check and the one for my MacBook fits my 12 Watt iPad charger.
-
Can I use the Sony XVAC-I Codec with Premiere Pro V6.0.5?
Can I use the Sony XVAC-I Codec with Premiere Pro V6.0.5?
No. You need to convert to another format first or use a third party plug-in.
Maybe you are looking for
-
CP1025nw firmware upgrade for eprint and/or airprint?
I bought one of these which is supposed to be eprint capable by late 2010. I can't find the firmware for this update. Otherwise, I believe it's misleading of HP to advertise the availability. If I had known, I would have returned the printer withi
-
Trying to get my MacBook Pro to show up on home network.
I just bought a Macbook pro and am realtively new to macworld. It will access the network and internet with no issues at all. Yet when I try to access the Macbook pro from my Windows Vista computers, I cannot see the MacBook. Why?
-
I have tried all the optons to change the home page, but when I exit from Firefox and restart, it will revert to the iZip search engine home page. I even deleted the izip search engine reference from the searchplugin directory but with no success
-
Hi, Please let me know the uploading techniques for Equipment BoM, Equipment Task List & General Task List. Regards, Maheswaran.
-
Register Oracle Streams with OID
I'm trying to setup an Oracle Streams environment that registers queues with OID. I have the db registered, and set global_toppic_enabled=true. DB is in archivemode. When I try to setup a queue with: BEGIN DBMS_STREAMS_ADM.SET_UP_QUEUE( queue_table =