I can't use the Mark Face or +Add People buttons in PSE11 or PSE12

Hi,
I'm really struggling with this as I thought this would be a very important feature for me, one reason I am trying to make PSE 11 work for me rather than Lightroom. When I click on the Mark Face button I get a pop up that says "People Analysis has yet to beperformed on the selected media. Would you like to start the analysis now?" When I click Yes, something pops up for less than a second, so fast I can't read it. I can tell there is a bar with what is maybe 0% to the left and 100% to the right. And that is all that happens. If I click on the +Add People button, same thing. If I right click on the picture I can select Add a Person, and then type in a name and I can add people tag that way. Not what I really want to do. The Mark Face funtion worked for about 50 picturesandthen stopped, I don't know why.
Things I have tried:
Optimize catalog.
Repair catalog,
renaming BreezeSession.dat to BreezeSession.old
I downloaded PSE 12 and am in the first day of my trial. The Mark face function worked for the first picture and I thought I had my solution! On the second picture it is now doing exacttly as before.
Any insight would be appreciated. I guess I could live without this feature but it is onethat I think I would really use.
Thanks,
-AJ

Hi 99jon,
Thanks for the reply. Selecting multiple thumbnails and clicking the +Add People button on the bottom toolbar results in the same problem. I get a popup for a brief instance and that's it. It lasts a fraction of a second. After repeated clicks I thinnk it says "Analyzing your media" or something to that affect.
-AJ

Similar Messages

What are the pros and cons of using people keywords, given that my catalogue is already uptodate with regular keywording of all subjects? e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular

What are the pros and cons of using people keywords, given that my catalog is already up to date with regular keywording of all subjects? e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular keyword in the same photo?

What are the pros and cons of using people keywords, given that my catalog is already up to date with regular keywording of all subjects? e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular keyword in the same photo?

Can you use the native GTK Forward and Back buttons instead of the default ones?

Hello!
On old versions of Firefox, the default theme always used the native GTK forward and back buttons. Ever since I updated Firefox, it overwrites these with its own arrow. Does anyone happen to know off the top of their head if it's reversible?

It looks like the GTK theme was not updated to support versions of Firefox after version 29. Have you contacted the developer about this as well?
Looking for a hack you may find more answers in mozillazine.org.

Can I use the marker option to separate files in one track

Hi, Can anybody give me some advice please on how to record an audio track (speaking) one channel in stereo then split into separate parts like chapters in a book. Its for a charity group Talking Newspaper for the blind. They have readers reading local newspapers clippings which end up as MP3s used like electronic books.
Thanks

Hi markbrads, in order to come up with some useful advice we have to know a bit more about the production in general:
a) are you recording / narrating it all by yourself or is it a engineer - narrator setup? How is the microphone connected?
b) the rec setup is crucial if you do not want to have heaps of edit work (sound wise) afterwards!
and
b) to decide on a production technique will depend on how experienced the narrator is. If you are the producer, rec-engineer and narrator all in one person, then you will have to plan a few thing in advance. The ideal narration production is the one where the narrator reads the script in perfect intonation and all gets recorded in one recording take. However, this seldom is the case! So there is always some editing involved. As producer/engineer you'll have to decide if you want to do corrections on the recording straight away or afterwards. You usually do not want to record 10 A4s of text in one take, split the text in parts and record them separately . Experienced narrators do not panic when mistakes happen, instead they calmly finish there sentence, wait a second and then start the same sentence again as if nothing has happened. The engineer will insert an edit marker without any need to stop the recording. After the recording you'll have to edit the parts and make a continuous narration from it.
So in short, are you engineering, narrating and producing or do you engineer/produce the voice recordings?
Have a nice day!

Project Oxford. Can I use the Face API for law enforcement app

Hello,
I am a .Net developer and have recently learned of Microsoft's Project Oxford.
I am very much interested in developing an app using the Face API but, had a question regarding the code of conduct.
Specifically it states:
People who use your app must have the consent of the people whose images are being processed by your app. We ask that you include a prominent notice in your app UI so your end users know that consent
is required.
The application I am attempting to develop is for law enforcement to detect wanted persons while out on patrol.
My questions are:
1. Is there an exception to the rule above for law enforcement?
2. Can I use the Face api for my application knowing that
in most cases law enforcement will not specifically ask for consent while scanning people?
As always thank you for your assistance.

https://www.apple.com/legal/intellectual-property/guidelinesfor3rdparties.html

I recently bought iphone6, My imessage and face time is not working and still it charged me for normal text message multiple times and still not able to authorise the usage. Let me know how I can start using the same.

I recently bought iphone6, My imessage and face time is not working and still it charged me for normal text message multiple times and still not able to authorise the usage. Let me know how I can start using the same.

Hello vinay34,
If you are having issues with activating your Apple ID for FaceTime and iMessage, then take a look at the article below to get it sorted out. Make sure that you have the Date and Time set to Automatic as well as any other steps listed in the article.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/en-us/ts4268
Regards,
-Norm G.

How can i used the "face time" is facetime is available here in the philippines?

how can i used the "facetime",is facetime is available here in the philippines?

Googling shows that FT is avaialbe in the Phillippines. FT s prohibited in some middle eastern countries and iDevices officially purchased in thos countries eill not have FT and it can't be added back even if the iDevice is moved to a country that allows FT.

How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.

Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
     Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How can i use the same front panel graph in more than one events in an event structure?

i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
Solved!
Go to Solution.

Hi,
I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
Regards,
Nitzz
(Give kudos to good answers, Mark it as a solution if your problem is Solved)
Attachments:
Graph and shift registers.vi ‏12 KB
graph and local variables.vi ‏12 KB

Help Me with Hp Pavilion dv6t-2000 , I Can't Use The Modem

Help Me with Hp Pavilion dv6t-2000 , I Can't Use The Modem Coz A Metal Cover it in my laptop !!

Hi,
Which port(s) are you talking abot ?
Figure 3: Back I/O ports
1 - USB 2.0: 4
2 - LAN (ethernet)
3 - DVI-D
4 - DVI-I
5 - Audio center/subwoofer
6 - Audio rear speaker out
7 - Audio side speaker out
8 - Audio line-in
9 - Audio line-out
10 - Microphone
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I hide the marker button in an ALV GRID line?

Hi all,
I am switching an old program from ALV LIST to ALV GRID. In the old list, I put a checkbox on each line to abilify the user to mark some lines. However, there are some lines that I don't want the user to select. In the list, I set the field for the box name to "*" (asterisk) and in the list, the checkbox is not input enabled.
Now in the grid, this does not function any more. all lines are markable. How can I deactivate the marker function for some lines?
Greetings
Jörg

Hi,
     use the below snippet in your code
DATA: ls_celltab TYPE lvc_s_styl.
REFRESH pt_celltab.
IF p_mode EQ text-103.
*§2a.Use attribute CL_GUI_ALV_GRID=>MC_STYLE_ENABLED to set a cell
   to status "editable".
    ls_celltab-fieldname = c_character1.
    ls_celltab-style = cl_gui_alv_grid=>mc_style_enabled.
    ls_celltab-style2 = cl_gui_alv_grid=>mc_style_f4.
    INSERT ls_celltab INTO TABLE pt_celltab.
    ls_celltab-fieldname = c_character2.
    ls_celltab-style = cl_gui_alv_grid=>mc_style_enabled.
    ls_celltab-style2 = cl_gui_alv_grid=>mc_style_f4.
    INSERT ls_celltab INTO TABLE pt_celltab.
    ls_celltab-fieldname = c_character3.
    ls_celltab-style = cl_gui_alv_grid=>mc_style_enabled.
    ls_celltab-style2 = cl_gui_alv_grid=>mc_style_f4.
    INSERT ls_celltab INTO TABLE pt_celltab.
    ls_celltab-fieldname = text-107.
    ls_celltab-style = cl_gui_alv_grid=>mc_style_enabled.
    ls_celltab-style2 = cl_gui_alv_grid=>mc_style_f4.
    INSERT ls_celltab INTO TABLE pt_celltab.
    ls_celltab-fieldname = c_selectionid.
    ls_celltab-style = cl_gui_alv_grid=>mc_style_disabled.
    INSERT ls_celltab INTO TABLE pt_celltab.
Regards

Safari won't start after showing an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.

Since yesterday evening (19-01-2015) safari won't start. After clicking the safari application it shows an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.
This message almost directly disappears whereupon the Problem Report opens. I've tried to find a solution on the web but without succes.
I'm running OS X Yosemite version 10.10.1 and Safari version 8.0.2 on a:
MacBook Pro (Retina 13-inch, Mid 2014)
Processor 3 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris 1536 MB
Since I updated to Yosemite I've been having multiple problems. I already read a clean install will solve most of them. But till then I would love safari to work again.
Thanks!

There is no need to download anything to solve this problem.
If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Can i use the laser jet printer P1102w with the i pad2?

Can i use the P1102w printer with my i pad or i phone?
This question was solved.
View Solution.

Hi,
Your printer is Airprint Compatible with the latest firmware.
Make sure your iPhone / iPad have iOS version 4.2 and above to support Airprint.
Upgrade the printer firmware from your PC by using the tool below, by using the tool for your OS:
Windows / Mac OS
Then you will be able to print from the iOS built in Print function as long they are connected to the same network as your printer,
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How can I make the marker event pulse width longer in NI-FGEN?

I want to generate a marker event on PF0 line using NI-FGEN.I can set the marker event pulse width but when I was trying to make the pulse width units as 65 I was getting an error-1074115931.
How can I make the marker event pulse width longer without using script as I am using PXI-5412 which is not supporting Script.
Can anyone help me out in doing the same?

Unforunately, as you mentioned, the PXI-5412 does not support scripting mode. This will limit you to 1 marker using sequence mode. However, the PXI-5421 and PXI-5422 would allow the functionality.
As far as making the pulse width longer, and as the KnowledgeBase Article that you linked to discusses, I don't think it will be possible to create a marker as long as 1us - 10ms using just the Marker properties and without using scripting. You can still try to do this with property nodes and see if you can get a usable result. Start with an example such as "Fgen Arb Waveform Marker" and use the "Marker Position" value to set the start time (you would want 0 here it looks like), and then "Marker Event Pulse Width Value" to change the pulse length, but again I am afraid you will probably reach the maximum of 640 ns here. If you're not able to get this going with the property node, you will need either a FGEN card that supports scripting or another card that does Digital I/O to accomplish this.
Thanks!
Stephanie S.
Application Engineer
National Instruments

Can i use the recovery of a different computer to recover my hp dv 6015tx?

os of my dv 6015tx has just crashed...i tried to install windows 7 professional....so can i use the recovery discs of any other computer to recover it??

Hi,
This is not going to work since some hardware "tattoos" have been done. Let's put this way if we could do that how Bill becomes a billionair ???
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I can't use the Mark Face or +Add People buttons in PSE11 or PSE12

Similar Messages

Maybe you are looking for