I can't use the right click to set jpg as wallpaper anymore

Help!
I used to be able to right-click pictures (using track pad) and the very last option on the toolbar that opened would be "set desktop picture". It is no longer there. what happened, and how can i fix it?
Jake

Try holding down the control key and then click.

Similar Messages

  • HT2216 I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly.  That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse.  Any clues?

    I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly.  That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse.  I only have a previous version re-install disc as I bought the latest OSX off the app store.  Any help gratefully received?

    Hmmm, no, no drivers needed, now it sounds like a bad install... unless you might have some old Mouse software installed???
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • I can't use the right-click function on websites (i.e. Yahoo! Mail) because Firefox's context menu is in the way. How can I fix this?

    I can't use the right-click function on websites (i.e. Yahoo! Mail) because Firefox's context menu is in the way.

    Tools > Options > Content : JavaScript > Advanced > Allow Scripts to: [X] "Disable or replace context menus"

  • I was on facebook and deleted an icon by using the right-click menu but then all my pictures and all profile pictures, could no longer be seen. I was able to view them in Explorer so this is something I did in Firefox. How can I unblock a site?'

    '''I was on facebook and deleted an icon by using the right-click menu but then all my pictures and all profile pictures, could no longer be seen. I was able to view them in Explorer so this is something I did in Firefox. How can I unblock a site?'''

    If you select that right-click context menu entry then you block all images from that domain and not one specific image, so do not use that.
    * Check the exceptions in Tools > Options > Content: Load Images > Exceptions (e.g. sphotos.ak.fbcdn.net)
    You can use these steps to check if images are blocked:
    * Open the web page that has the images missing in a browser tab.
    * Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
    * Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
    * Go to the <i>Media</i> tab of the "Tools > Page Info" window.
    * Select the first image link and scroll down through the list with the Down arrow key.
    * If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

  • How can I get the right click to work in firefox -- it works in internet explorer

    how can I get the right click to work in firefox -- it works in interne

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • How to always rotate objects around the same point, even using the right-click menu?

    I need some of my objects to always rotate around the same point. How can I select a point which will stay that way?
    Using the rotate tool resets after deselecting.
    Also, I'd like to rotate objects around a certain point even when using the right click > Transform > Rotate.
    Is it possible?

    Right, so this is where Illustrator falls short with respect you your need, but only in the sense that the reference point can't be made to stick. You can, however, use Smart Guides to make it so the point is easy to set at exactly the same location, (especially since your object has an anchor point there), manually before each rotation.

  • How can I modify the "right click" menu of a table control?

    Hello,
      How can I modify the "right click menu" of a table control. I would like to be able to remove the ability to add or delete columns and maybe other selections. I want to keep the ability to
    add or delete rows

    Hi Andy,
    Dialog & User Interface VIs -> Menu functions
    Never used them, eh?

  • Downloaded 3.6.13 today and now I can not use my right click function when trying to open a new tab!

    When browsing the net I can not use my right click function on a link to open a new tab. How can I fix this? It was working fine until I downloaded 3.6.13 Firefox this am.

    I un-installed the yahoo toolbar and my problem was solved!!!!

  • Inside the browser, right click on the mouse seems to be disabled. How can I enable the right click button? It works fine on toolbars and tab bar but not inside tabs or windows. I would like to be able to copy and paste and such. Thank you

    Right mouse button does not open any menu when clicked inside of tabs or windows. Works properly on the toolbars, in the address line, search bar...etc. but has no action on the page I'm browsing. I purchased a mouse recently and like the old one, the right button works in all other areas of my operating system. I would like to know if there is a setting in firefox that I can change to correct this.

    There are also websites that can disable the right-click context menu.
    See Tools > Options > Content : JavaScript > Advanced > Allow Scripts to:
    [ ] "Disable or replace context menus"
    There are other things that need attention:
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Shockwave Flash 10.0 r42
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • Can't use the Zoom Tool to set the Magnification level of pages to diff sizes from the preset ones

    Hi, I am trying to use the Zoom Tool and "Set Magnification" on my Dreamweaver CS5.5 in order to view my pages at different magnifications when working on them.  My problem is that I need to use different sizes than those sizes that are available under the preset magnification levels list (which are for example 100%, 150% or 200%).  These are the ones that  come up on the zoom pop-up menu.  The dreamweaver tutorial says that I need to type in the size I want (e.g. 115% or 130%) in the "zoom text box" and it will then apply that size to the page but the box does not let me change whatever size is currently in it.  I can’t override or delete whatever preset size is in the box or do anything to change the zoom from the pre-set levels! I would really appreciate some help with this thanks

    Hi Ben, thank you for the reply, unfortunately that was one of the pages I was looking at to try and fix this issue but it is of no help. 
    The page says for zooming in and out of a page to "Type a magnification level in the Zoom text box.".  My dreamweaver will not let my type a manficiation level in the zoom text box.  It just won't let me override whatever is in the box (e.g. 100%) so I can't change it from the default pre-set magnification levels. It is so frustrating!
    Does anyone else have any other ideas?
    Thanks
    Rachel

  • Can v use the same Client for setting the ALE ??

    Can i use the same client like 080 for my ALE configuaration ?

    Configuring is a Cross-Client(Client Independent) activity.
    Check whether you have necessary access/authorizations to Configure.
    This should be always done in Development client.
    Hope this helps.
    Regards
    Vinayak

  • Can't use toolbar, right-click menu or hyperlinks

    For some reason when I open a PDF, the bottom toolbar that fades in and out does not function at all. I can't click the save, print, zoom, next page buttons. Also,  when you right click on the PDF, the menu appears in a different spot than where you clicked.  I also have the issue that I cannot click any hyperlinks in the PDF. When I hold my mouse over them, it rapidly switches between the text editing mouse icon and the finger hand mouse icon.. I have also noticed that when you try to move the fading toolbar, that the toolbar you have clicked and started to drag appears far above/below where the mouse is.
    I have tried playing with many of the settings in the Edit > Preferences panel, with no luck on any of the. I have also fully uninstalled and reinstalled Adobe Reader X with no luck. I have tried opening the PDF on multiple other computers and they can all open and function properly. I am not using a work around by downloading the PDF and using the actual Adobe Reader rather than the IE version. (I have also tried opening the PDF in FireFox and it too has the same issue.)  Any suggests would be great, I have no clue what else to do! Thank you in advanced

    I think I have solved the problem. If anyone else is having an issue with this, try looking at your font size settings in Control Panel > Display (Windows 7) . It needs to be set to iether 100% or 125% for Adobe Reader to work correctly.

  • How do I copy and paste an image form the internet to Keynote. I have done this successfully in the past by selecting copy and then paste by using the right click function and now am unable to do so. I am thinking it is an outdate OS problem...not sure.

    How do I copy and paste an image from the internet to Keynote. I have done so successfully in the paste by using the copy and paste right click functions but am unable to do so now. That was about a year ago that I attempted that I was able to do this. Thank you for your help.

    Some images are copy-protected.
    If all else fails, you can make a screen shot of the image: 
    With the image visible in your browser, press CMD-Shift-4 and your cursor will change to crosshairs.
    Position the cross hairs at one of the corners of what you want to copy and drag to the opposite corner, then release the mouse. An copy of the image will be saved to your desktop.
    You can now edit and use this image.
    Be sure to respect copyrights.
    Message was edited by: bwfromspring hill

  • Save as quicktime file so quicktime player can be used after right-click

    Hey,
    I'm adding short .aiff's to a site for people to right click and save.
    -I'm making the .aiff using logic express.
    -Bouncing to desktop.
    -Changing file to "open using quicktime player" which makes the file look like a quicktime file with the big "Q" on it. When I double click on the file, it opens with quicktime player.
    -Creating text box and linking .aiff (actually they are .aifc) file to text box, just regular stuff for creating links for files.
    -After I publish site to folder. When I go in and right click on the link to save to desktop, the file I thought used quicktime player becomes an itunes .aiff file with the itunes colors (green) and opens using itunes, thus adding the file to my itunes library.
    I'd like people to be able to just open the .aiff and quicktime player would automatically play the file, this way unwanted stuff won't be added to itunes library.
    Any thoughts?
    Thanks, byt
    ps, I've been looking up the difference between .aiff and .aifc. It looks as if they are about the same except you can compress .aifc. Does it really matter which is which if you're not compressing or anything and just clicking and playing?
    imac g5   Mac OS X (10.4.5)   Woodwinds, presonus firebox, Garageband and Logic Express, iweb

    -After I publish site to folder. When I go in and
    right click on the link to save to desktop, the file
    I thought used quicktime player becomes an itunes
    .aiff file with the itunes colors (green) and opens
    using itunes, thus adding the file to my itunes
    library.
    I think this is a function of how someone's browser is set up or maybe system preferences that associate file types with certain default applications. For instance, you can take the .aiff file on your desktop that is currently associated with iTunes (and has the iTunes icon)....right click on it and select "Open with..." In the opened window select QuickTime player and then check the "Always Open With" box. This will make QuickTime player the default player of .aiff files instead of iTunes. So you see how it is a user defined variable in terms of which application opens which document.
    I'd like people to be able to just open the .aiff and
    quicktime player would automatically play the file,
    this way unwanted stuff won't be added to itunes
    library.
    An alternative would be to convert your sound files to .mov files that will by system default be opened by QuickTime player directly...just like iTunes is the system default for .aiff sound files.
    If you have found any of this information to be useful to you, please take the time to provide me with feedback by marking my reply as "solved" or "helpful" using those little buttons that you see in the title bar of this reply. I'd really appreciate it!

  • I have graphical errors on the browser edges when i use the right click menu and close out tabs.

    Ok I will try to explain this the best way I can as I'm not sure what to call it. But simply put, if I have FF4 open, sometimes I get a graphical glitch on the edge of the window. It seems to always occur when I right click near the edge of the browser window, then close out that current tab. A small part of the context menu remains on the screen. Here is a screenshot:
    [http://img.photobucket.com/albums/v475/JunkHead/fireglitch.jpg]
    notice the section in the lower right hand part of the browser. That's the leftover context menu in the edge of the window. There is also a section on the bottom of the browser as well. I didn't plan on that one, and have no idea why it is there. I had no menu open there. Anyone every see this before?

    You can also use ctrl-T or File > New tab (if you have the menubar showing). I can't find an extension that will help you bring back the previous behavior but there probably will be one soon.

Maybe you are looking for