I can't use WebDav

Hi!
When I try to connect to WebDav via Windows Explorer I obtain the following error:
"Server configuration properties could not be obtained"
<?hda version="10.1.3.3.2 (071031)" jcharset=UTF8 encoding=utf-8?>
@Properties LocalData
StatusCode=-1
StatusMessage=No service defined for COLLECTION_PROFILE_GET_COLUMNS.
blFieldTypes=StatusMessage message
IsJava=1
IdcService=COLLECTION_PROFILE_GET_COLUMNS
ClientEncoding=UTF8
blDateFormat='{ts' ''yyyy-MM-dd HH:mm:ss{.SSS}[Z]'''}'!tAmerica/Buenos_Aires
@end
I revised the the following Metalink note:
WebDAV with Apache: Unable to Login, Login Prompt from Apache not IDC Security
Doc ID: Note:445741.1
My filter version is > 5.1.1.41
and this is my section of httpd.conf
Alias /idc "D:/scs751/weblayout"
<Location /idc>
DirectoryIndex portal.htm
IdcSecurity Stellent
</Location>
Any help are welcome!
Thanks,
Diego.

Hi
Seems that CS version is 10.1.3.3.2. I would suggest you to upgrade your CS to latest patchset level and install the Folders_g and CoreWebDav component and then try to see if the issue persists.
Also if not getting around this issue put the following details:
Folders component version
Webdav component version
Thanks
Srinath

Similar Messages

UCM - I can't use WebDav

Hi!
When I try to connect to WebDav via Windows Explorer I obtain the following error:
"Server configuration properties could not be obtained"
<?hda version="10.1.3.3.2 (071031)" jcharset=UTF8 encoding=utf-8?>
@Properties LocalData
StatusCode=-1
StatusMessage=No service defined for COLLECTION_PROFILE_GET_COLUMNS.
blFieldTypes=StatusMessage message
IsJava=1
IdcService=COLLECTION_PROFILE_GET_COLUMNS
ClientEncoding=UTF8
blDateFormat='{ts' ''yyyy-MM-dd HH:mm:ss{.SSS}[Z]'''}'!tAmerica/Buenos_Aires
@end
I revised the the following Metalink note:
WebDAV with Apache: Unable to Login, Login Prompt from Apache not IDC Security
Doc ID: Note:445741.1
My filter version is > 5.1.1.41
and this is my section of httpd.conf
Alias /idc "D:/scs751/weblayout"
<Location /idc>
DirectoryIndex portal.htm
IdcSecurity Stellent
</Location>
Any help are welcome!
Thanks,
Diego.

Hi
Seems that CS version is 10.1.3.3.2. I would suggest you to upgrade your CS to latest patchset level and install the Folders_g and CoreWebDav component and then try to see if the issue persists.
Also if not getting around this issue put the following details:
Folders component version
Webdav component version
Thanks
Srinath

Using WEBDav methods

How can I use WEBDav methods in ABAP.
I like to access Exchange Public folder from SAP side using WEBdav development.
Does anybody know where I can find information on how to do this ?
Thanks
Georg

Hi Georg!
For the starting, have a look at help.sap.com:
http://help.sap.com/saphelp_erp2004/helpdata/en/46/bb1853ab4811d4968100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/46/bb184dab4811d4968100a0c94260a5/frameset.htm
Regards,
Christian

Can't upload files using webDAV

hi guys. i have a bit of a frustrating problem. im trying to upload zip file (~50MB) to a file hosting site (in.solit.us specifically) and i'm using webDAV to do so. i have no problem connecting to and mounting the server, but whenever i try and add anything to the dav disk it give me the error:
"you cannot copy some of the items to the destination because their names are too long or contain invalid characters for the destination."
i freaking hate this error message, whenever i get it it is so unwarranted. my zip file is titled "one.zip"... so no the name isn't too long or any such thing. the compressed files inside this zip file are also of similar length and composition. when i try and upload anything, even a smaller (regularly named) doc file, finder gives me the same error. what's more, when i try and create a new folder within the dav drive the "new folder" icon pops up for a few seconds then immediately disappears. which is kind of funny because when i then try and create another new folder it names it "new folder 2" -- which then subsequently disappeared as well. last time something like this happened to me it was a problem with the disk automatically ejecting itself after a couple of seconds. this does not seem to be the case here, console reads:
"Feb 11 18:55:45 localhost webdavd[1641]: /Volumes/dav mounted"
and then, when i manually eject it:
"Feb 11 19:15:17 localhost webdavd[1641]: /Volumes/dav unmounted"
console does not lie.
any help would be much appreciated

Hi Bilinbaja,
I am not sure if you are using FTP to upload the files, however this error can sometimes refer to a hardware issue. Please try to toggle the hardware acceleration by right clicking on a item using the flash plug in and selecting settings.
Please let us know if this improves the performance as well as if this also happens on other computers, or if it still happens after you delete cache and cookies. Each browser has its own cache, Firefox's cache may also be longer. [[How to clear the Firefox cache]]
Did this help? We look forward to your reply.

Can I use OSX Server instead of Dropbox?

We are considering buying OSX Server. One basis for the purchase would be to replace Dropbox. We currently use Dropbox with local sync of folders, so all oru people work directly in folders that are synced to everyone else. Thus all docs are available locally all the time adn then they are available on everyones iPads, iPhones and Android phones. However a downside of that is that it takes space on the local hard drive, we can have conflicts where multiple people open a file.
Can someone please explain how remote users get access to the OSX server and the documents on it and if there is a "syncing" option similar to Dropbox?
Thanks
John

Answers:
#1 Yes, if set up correctly the server can be available to everyone with Internet access.
Typically this would be via a VPN connection. One caveat–only one VPN connection can be active from a particular LAN. In other words, if two computers on the same LAN want to connect via VPN to your server, this will not work (at least it wouldn't under earlier versions of OS X).
WebDAV is a possibility but I have not had good results when using WebDAV. Access is limited to apps that support WebDAV connections (such as Pages, Numbers, and Keynote). Even then it seemed a bit problematic.
#2 Any offline documents from the server must be managed manually. In other, you must manually copy them back and forth. As Linc mentioned above, OS X Server does not offer sync functionality.

Query on integrating windows file server into SAP KM using WEBDAV

hi
I have sucessfully integrated windows file server into SAP KM using WEBDAV. I have query in it regarding the possible validation against the portal Database user. Can we configure such that the user comparison happens for LDAP as well as database user. Have anyone configured such a scenario?
Regards,
Ganesh N

Hi Ganesh,
this should work in principle.
However you would need a user in Active Directory for each user in the portal database that should connect to the file server if you are using the SSO22KerbMap Module as I assume.
In my whitepaper I have mentioned this for the internal user index_service that does only exist in the portal database.
Best regards,
André

Time machine backup on NAS using WebDav?

Hi, I regularly use Time Machine to backup my mac on a NAS using my home network (Synology instructions are for configuration using the afp protocol). I have been travelling a lot lately and Time Machine backups on my NAS are not a choice. I’m using an external drive as a temporary strategy until back home. Anybody knows if it is possible to configure Time machine to backup on a NAS using WebDav protocol? If so, how to do it?
I appreciate any information / help with this.

Extremely unlikely.
It is possible to use Back to my Mac to back up to a Time Capsule over the Internet, but many folks can't get it to work; even when it does, it's very slow.
I've never seen any posts about it being done to any other Internet destination.

File transfer from backend to sharepoint server using WebDAV

Hi,
Currently we are in development process of our product and we have a component called Document Publisher which should publish(upload) the documents to the web folders in the sharepoint server using WebDAV from the backend.
I was able to find some classes in the backend like CL_HTTP_WEBDAV, CL_HTTP_WEBDAV_SKWF etc and these classes have some set of methods which i feel can be used for uploading the documents to another location from the backend. But i am not sure how to achieve this and i was not able to find much of the information about this online.
It would be really great if somebody can help me in this.
Thanks a lot in advance,
Kasthuri

Hi Kasturi,
What you exactly want to do because your query not clearly visible to anyone?
Regards

Regarding mass upload of contents in KM using WEBDAV

hi all,
plz do help me out with mass upload of contents in KM using WEBDAV .
its urgent

Hi,
check this out.
http://help.sap.com/saphelp_nw70/helpdata/en/42/e6753939033ee5e10000000a1553f7/frameset.htm
You can install an application an upload files and folders.
Regards
Ismail

Problem while integrating windows file server into SAP KM using WEBDAV

Hi
I am trying to integrate windows file server into SAP KM using WEBDAV . I have downloaded the kerberos ini filter and included in the windows system. I am only trying to bring the files in the same system into KM but with no luck. When i check the log file in the kerberos folder i am getting
<b>12:02:22 10828/10476 E OnPreprocHeaders: Found 0 UserPrincipalNames for ADSI Filter (&(objectCategory=person)(objectClass=user) (userPrincipalName=xxxx))</b>.
In the log i am getting the following
ERROR! Delegation Flag:Use any authentication protocol: NOT ACTIVE
                       Open 'Active directory Users and Computers'. Choose <domain> -> 'Computers'.
                       Right-click 'IDBSRV8' and choose 'Properties'.
                       Select 'Delegation' and 'Trust this computer for delegation to specified services only'.
                       Select 'Use any authentication protocol'.
                ERROR! The Trusted-to-Authenticate-for-Delegation flag is not set for SPN 'HOST/idbsrv8.idbhq.org'.
                       Please check the SPN by calling 'setspn -l IDBSRV8'.
                       If the SPN is well known, configure the Trusted-to-Authenticate-for-Delegation flag:
                       Open 'Active directory Users and Computers'. Choose <domain> -> 'Computers'.
                       Right-click 'IDBSRV8' and choose 'Properties'.
                       Select 'Delegation' and 'Trust this computer for delegation to specified services only'.
                       Select 'Use any authentication protocol' and choose 'Add'.
                       Select 'Users or Computers' and enter IDBSRV8 as object name.
                       Add the ServicePrincipalName HOST/idbsrv8.idbhq.org.
Can anybody please help me in this regard???
Regards,
Ganesh N
Message was edited by:
        Ganesh Natarajan

Hi Ganesh,
this error message tells you that there is no user in your active directory that has the userPrincipalName xxxx.
The SSO22KerbMapModule works as follows.
1. It receives a SAP Logon Ticket from the WebDAV request.
2. If valid the SAP username is extracted. In your case the SAP username is xxxx.
3. It then searches for a user in AD. It does so using the attribute in the ini-file that has been specified to contain the SAP username. In your case the SAP username should be identical with the userPrincipalName.
So you have to make sure that the portal user id (j_user) is mapped to the same AD user attribute that is specified in the ini-file .
Best regards,
Andre

Exception while contributing content using webdav

Hi All,
Getting the below exception when i try to check in files using webdav (i.e. from windows explorer), not sure why this is happening ? please provide your inputs for troubleshooting this issue.
Stellent Product Version: 7.5.2
helperservice     04.28 00:11:13.716     IdcServerThread-290730     service exception in COLLECTION_CHECKIN_REVISION[23] -1 doService -1 !csDynHTMLArgumentMessage2,3,<$dAlias$>!syParameterNotFound,dAlias!$
deprecation     04.28 00:11:13.719     IdcServerThread-290730     obsolete method SystemUtils.error() called, use err() instead-exception stack
java.lang.Exception: obsolete method SystemUtils.error() called, use err() instead
     at intradoc.common.SystemUtils.reportDeprecatedUsage(SystemUtils.java:767)
     at intradoc.common.SystemUtils.error(SystemUtils.java:477)
     at webdavextension.WebdavHandler.doPutMethod(WebdavHandler.java:614)
     at sun.reflect.GeneratedMethodAccessor215.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:336)
     at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:128)
     at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:73)
     at intradoc.server.Service.doCodeEx(Service.java:674)
     at intradoc.server.Service.doCode(Service.java:656)
     at intradoc.server.Service.doAction(Service.java:580)
     at intradoc.server.Service.doActions(Service.java:425)
     at intradoc.server.Service.doRequest(Service.java:1860)
     at intradoc.server.ServiceManager.processCommand(ServiceManager.java:350)
     at intradoc.server.IdcServerThread.run(IdcServerThread.java:162)
Thanks,
Bharani

Hi
syParameterNotFound,dAlias is the core reason why the checkin is failing .
Looks to me that you have a metadata configured on your UCM instance with this name .
So what you can do is to navigate to Administration - Folder Administration - Default Information Inherit - Check the option box for <dAlias metadata> - Update
Set the value for this metadata from CS GUI for the Folder where the checkin is being done .
Then checkin the content to this folder from WebDAV again .
See if the issue still persists .
Thanks
Srinath

Dreamweaver CS3 fails when publishing to the web server using WebDAV

Dreamweaver CS3 fails when publishing to the web server using
WebDAV
using an earlier version (7.x/8.x) works fine.
Does anybody know if there is a solution for this.. This is
urgent..
Attempting to call the 1-800-833-6687 number fails with:
recording, music, rings as though someone will finally answer, but
gets a few dial tones and connection goes silent..
Thanks
J.

If all of your credentials are correct, Server Name/IP Address, Username, Password, Root Directory and it's still not connecting, I would try toggling the Passive FTP checkbox.
If you still can't connect in DW, try downloading a third party FTP program like Filezilla (free) and uploading there. If the third party app doesn't work either, there is likely a problem with your credentials and you would need to contact your hosting provider to straighten it out.

NTLM authentication fails to connect using webdav on osX

We are having problems in our organization getting our macs connected via webdav using NTLM authentication.
Our structure is as follows:
Netapp/IBM nSeries gateway/filer model n6040 which is our FTP/CIFS/Webdav host.
Windows Server 2008 R2 Domain Controller with Active Directory
Windows 7, Mac osX clients (various versions).
From the windows side, we are able to connect to our filer via FTP, CIFS, and http/Webdav after we authenticate using our AD credentials. From the Mac side, we can authenticate and connect to our filer using FTP, CIFS (using Connect to Server "smb://ourfiler.com") and through a browser using the address of http://ourfiler.com. This type of connection using webdav works with Firefox but not using Safari or Chrome but isn't adequate enough for our users since the browser based connection is read only. However, when we try to Connect to Server via webdav using our server address of http://ourfiler.com:80, we never get past the "Enter your name and password for the server "ourfiler.com."
We tried a third party webdav client on our macs: Cyberduck, which also fails to connect using webdav. We also tried a separate linux client and were able to connect without any problems.
Since authetication for webdav works on windows and linux, we're thinking there is problem with osX itself. Has anyone else had this problem or can anyone suggest any workarounds/solutions?

Sorry for the late replies gentleman... for some reason I didn't get email alerts when you guys posted....
Anyways, yes the DC is on a different subnet and no we don't have WINS. The way I understand it is the client will contact the master browser in it's local subnet... all the master browsers in all other subnets contacts the Domain master browser ...
and they share the server list this way... I mean it's a little more complicated than that....well to me at least...
Can you try resolving the short name with the domain controller being on another subnet and you having a different master browser in your client subnet?
What is the process the client goes thru when looking up Domain netbios name? LIke for DNS, it's straight forward... the client looks at DNS server, then for the SRV records for the Site the client is in and get's domain controller....... How
does this work for netbios domain name? There is NO WINS in the environment.
Chau

Is it possible to share a Mounted Blank Disk Image using WebDav?

I am trying to find a good solution to give individuals the ability to change files in there hosted websites on the Mac Mini Server (10.6.4), but also having a limited folder size. I have seen a few post on using Blank Disk Image as the share folder. I have created the folder and I can see it contents using a WebDav client, but no matter what permissions I put, anytime I try to upload or delete a file from the image I get a 403 error, saying "Forbidden". I can get the WebDav to work on normal shared folders, so I am wondering if it is even possible to share a mounted blank image using WebDav?

It seems if I make an MS-DOS(FAT) image, I can actually make changes to this image file using WebDav, but I cant see how to changer the permissions of the folder. All the methods I have tried do not actually seem to change the file permissions, they default to read and write for everyone.
I am trying to figure out if I am trying to get something to work that is not even possible. I need to be able to limit the size of a folder, share it with specific groups/users in the Open Directory. It also has to be viewable on both Windows and Mac Systems. FTP does not seem to work, since it gives access to the root. I want to be able to have a student/student group post to a wiki, have a website for there project, but they should only have access to this image....
Does anyone know if you can share a mounted image through WebDav, or if there is another way I can setup multiple folders and have websites point to this folder and give only selected users access to the folder for uploading and sharing files?
Any guidance would be greatly appreciated

HT5051 Can I use Dropbox with Pages?

Can I use Dropbox with Pages

True that gets the file into Dropbox, and yes you can use the dropbox app and open in app protocol all for free but that does mean you have to open two apps have the iPad do some manipulation with duplicate files copied.
What dropdav does is contain everything within Pages.
Your working in Pages and want to edit a document you know is in your Dropbox you simply tap on the + in the top left of the Pages document screen scroll to copy from Webdav and all your Dropbox files and folders show up right there WITHIN Pages thusly
Any compatilbe file is bold and can be opened DIRECTLY in PAGES edited and returned seemlessly with the copy to Webdav or yes the print to Dropbox (Both work)
The key is Webdav integration within Pages allows for external file transfer.

I can't use WebDav

Similar Messages

Maybe you are looking for