I can't VPN from my Mac to my office's microsoft server HELP!

I am unable to access my company's microsoft network from my Mac computer at home. I believe there is a setting that the company needs "turn on" to allow the network to accept Mac's to access it...does anyone know what that setting is?

What exactly is the error you're getting? What VPN server is your company using? PPTP or L2TP/IPSec?

Similar Messages

  • Can't print from Intel Mac w/Snow Leopard to HP 2600

    Can't print from Intel Mac w/Snow Leopard to HP 2600.  Upgraded from OS 10.4 and printer showed on printer list along with an Epson scanner. but continually shows printer as offline.  I finally deleted the HP Color Laserjet 2600n from the printer list.  When I attempted to re-install it, it doesn't find the printer at all.  I haven't attempted to use the scanner.  I also went to HP and downloaded the driver, no luck.  I've restarted the computer multiple times, tried it with the printer on, and printer off, as well as pulled the usb cable in and out both ends.  No error message on the printer display and it gpes through normal warmup until it shows the green light.  I run software update and it shows no updates needed.  Help!

    Go down a few more posts to the question about the C7180. Answer:
    "Re: iPhoto 08 + HP Photosmart C7180
    Posted: Aug 19, 2007 1:26 PM in response to: Daniel_D
    When you press print the first window is pretty basic.
    When you select print on that the next window should have an advanced option.
    Click that and see if any of the options in the 3rd dropdown box allow you to specify the 'paper tray'.
    AC "
    In this new windaow, click "advanced", go to "paper type/quality" and choose " best" and a photo paper. Then you will be able to choose a paper source (photo tray).
    Once you have these settings, under presets do "save as", and you can choose the preset instead of going to advanced.
    If you have the latest software and drivers downloaded from HP, this will work.
    Scott

  • Can u boot from a Mac in target disk mode

    I'm wanting to know if I put a Mac mini in target disk mode, can I boot from that Mac mini from my MacBook Pro. I'm wanting to set up a mini as a server but it may have to be the basic and ill install server on it but I prefer to do it without using a monitor. I'm curious to know if its possible.

    You don't need a monitor with the MM, and neither boot in Target Mode. Like me, use screen sharing for remote access over the network:
    On the MM, -> System Preferences -> Sharing, there check Remote Management and choose which user, if not all, may have access. If you're not the only one, you can limit access for each user under Options.
    Under  -> System Preferences -> Energy Saver, it makes sense to check Wake for network access.
    Then you can log out from the MM, leave it sitting at the login screen and turn off or disconnect its screen.
    On the remote Mac, open Finder and find the MM under Shared. Click in it, then on Share Screen. You'll need to enter the login credentials for your account on the MM, eventually save it to your Keychain. Then your MM's login screen should appear in a window on your remote Mac. You have now full access to the MM.

  • Can you text from a Mac Book Pro

    Can you text from a Mac Book Pro????

    You might want to check but you are not in notebook forum and it might be an OS X and iMessage related questions.
    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro
    http://www.apple.com/support/

  • Can you airprint from a mac book pro?

    can you airprint from a mac book pro?

    You might want to check but you are not in notebook forum and it might be an OS X and iMessage related questions.
    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro
    http://www.apple.com/support/

  • Received delivery subsystem error email 25,000 plus times. Can delete easily from my mac but deleting from my inbox on my mac does not delete from inbox on my husband and my iphones. HELP

    Received delivery subsystem error email 25,000 plus times. Can delete easily from my mac but deleting from my inbox on my mac does not delete from inbox on my husband and my verizon iphones. HELP

    delete and re-add e-mail on iphone and it will update with whats current on the server

  • I cannot share information to my mac from my i phone with iCloud.. i can only share from my mac to the iPhone :s every setting seems to be find with iCloud.. any ideas ?

    i cannot share information to my mac from my i phone with iCloud.. i can only share from my mac to the iPhone :s every setting seems to be find with iCloud.. any ideas ?

    It may because you have iCloud and On your Mac views set up.
    Let's work with Contacts....
    1.  Open Contacts
    2.  Preferences
    3.  Accounts
    Does your screen look like this?
    2

  • How can i imessage from my mac?

    how can i imessage from my mac?

    If you have Mac OS X 10.6.8 like your product info indicates, you cannot. Messages requires OS X Mountain Lion (10.8) or later.
    See Updating Mac OS.

  • HT4967 I can sync data from my Mac to my iPhone and iPad and from my iPhone to the Mac and iPad, but cannot sync data from the iPad to either device. My iPad is configured to Push. Is there another setting than I'm forgetting?

    I can update data from my Mac to my iPhone and iPad, and from my iPhone to my Mac and iPad, but cannot get data to update from my iPad to either my Mac or my iPhone.

    If new calendar events entered on your iPad do not appear on icloud.com, go to Settings>Mail,Contacts,Calendars>Default Calendar on your iPad and be sure you have selected an iCloud calendar as your default and not something else like On My iPhone, a Gmail or Yahoo calendar, etc.  If you haven't, make this change, then add a new event and see if it appears on your calendar on icloud.com now.
    If your settings are correct and new events still aren't appearing on icloud.com, add any missing calendar events from your iPad to your calendar on icloud.com.  Once the calendar on icloud.com is up to date with your iPad, go to Settings>iCloud, turn Calendars to Off, choose Delete from My iPad when prompted (they will still be in iCloud), then after a 15 seconds or so, turn Calendars back to On.  Then add a new event on your iPad and see if it appears on your calendar on icloud.com now, and on your other devices.

  • My Apple TV2 keeps resetting when watching NETFLIX. This started about one week ago. I can watch fine from my MAC. Both are hardwired to my Aiport network..

    My Apple TV2 keeps resetting when watching NETFLIX. This started about one week ago. I can watch fine from my MAC. Both are hardwired to my Aiport network.

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • How can i airplay from my mac connected through ethernet to an aple tv 2 on wifi

    Hi everyone..
    im having troubles using Airplay on my mac.. i connect my mac to the internet and home network using an ethernet connection to my router (non apple branded router) .. my apple tv 2  is connected to my home wifi network from the same router.. when i first set up my apple tv.. i was able to see the Airplay icon on itunes and it would let me Airplay media from my mac to my apple tv.. however.. it disconnects after a little while.. same thing with viewing my itunes library from apple tv.. i was able to detect my shared library from the apple tv.. i was able to play some media but then it disconnected after some time.. but now.. the Airplay icon doesnt show up in itunes anymore.. and i cant see my shared library from my apple tv neither.. ive looked around for a solution and followed the tip to turn the ipv6 off.. it worked for some time but now the problem is back..
    i know the obvious solution is to connect my mac to the same wireless network as my apple tv.. but i would like to keep it connected through ethernet..
    Mac OS X Lion 10.7.4
    Apple TV 2 software version 4.4.4
    Thanks in advance

    thisguy. wrote:
    ......i know the obvious solution is to connect my mac to the same wireless network as my apple tv.. but i would like to keep it connected through ethernet.........
    I wouldn't say that was the obvious answer at all, my Mac is connected by ethernet and 6 of my 7 Apple TV's are connected by wifi, I haven't had any of your problems. The problem is most likely on your network.
    Intermittent problems
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
    Consistent Problems
    A frequent cause of consistent failure to enable AirPlay or HomeSharing at all, is the service being blocked on the network. Make sure your network isn't hidden, has a unique name, that MAC address authentication is disabled, security is set to use WPA 2 Personal and that there is only one router/device acting as a DHCP server and providing NAT services.
    Make sure your router/computer allows access over the following ports
    Port
    Type
    Protocol
    Used By
    80
    TCP
    HTTP
    AirPlay
    443
    TCP
    HTTPS
    AirPlay
    554
    TCP/UDP
    RTSP
    AirPlay
    3689
    TCP
    DAAP
    iTunes/AirPlay
    5297
    TCP
    Bonjour
    5289
    TCP/UDP
    Bonjour
    5353
    TCP/UDP
    MDNS
    Bonjour/AirPlay
    49159
    UDP
    MDNS (Win)
    Bonjour/AirPlay
    49163
    UDP
    MDNS (Win)
    Bonjour/AirPlay
    Refer to your router manual/manufacturer for any settings that are specific to that model.
    Another frequent cause of consistent failure to enable AirPlay or HomeSharing at all, is security software, in many cases configuring it correctly, disabling it or even uninstalling it can help, but in some cases the security software can cause problems that simply reconfiguring, disabling or uninstalling cannot reverse.
    If you are consistently unable to activate AirPlay, have tried all the steps in this article and have security software installed on your system, you might benefit from contacting its provider or participating in any online forums they run to discuss the matter with them.

  • Can i print from my mac to a win 7 printer?

    I have done a search and was unable to find the answer to my question. I have tried to figure out how to print from my MBP to my wifes printer that is attached to her windows 7 computer. I am able to print to that printer over the network with a windows computer but not my mac.
    Does anyone know how to get this done or if it is even possible?

    Printing from your Mac to a printer attached to a WIndows 7 printer can indeed be done.
    It use to be quite easy under Windows XP or even Vista, But Microsoft changed the SMB code in Windows 7, making it more of a headache.
    Here is how to share your Windows 7 printer:
    http://macs.about.com/od/printersharing/ss/Printer-Sharing-Share-Your-Windows-7- Printer-With-Your-Mac.htm
    You may also find this helpful for sharing files with Windows 7 and your Mac:
    http://macs.about.com/od/networking/tp/Windows-7-And-Mac-Os-X-Getting-Windows-7- And-Mac-Os-X-To-Play-Together.htm
    Tom

  • Can't print from my mac to my HP Colour Laserjet 1600

    I have a HP Colour Laserjet 1600. Whenever I print anything from my mac, a icon appears in the dock but, disappears after about 5 seconds and nothing gets printed. Can someone please tell me what I can do?

    The third party HPIJS drivers do not support the LaserJet 1600 on a Mac.  You can view the list of printers that are supported by the HPIJS drivers at http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpijs# Printers.
    There are third party drivers that do support the LaserJet 1600, but there are no Mac installer packages available for them.  You would have to compile them from source code.  These foo2hp drivers can be found at http://foo2hp.rkkda.com/.

  • Can't FTP from a Mac to a Mac through ABS but can from a PC to Mac

    Hi all,
    I have a problem trying to FTP from a Mac to a Mac through my ABS but can do so from a PC (windows machine).
    I have a webserver http://jeanmatthieu.free.fr/pureftpd/ installed on one of my Macs which is connected to the internet via my ABS (snow). My other Mac is connected to the net via a dial-up modem. I can successfully FTP to the Mac with a webserver using an FTP application on a PC, but am unable to successfully connect from a Mac using an FTP appllication (I have tried Transmit, Fetch, and Cyberduck). The Mac FTP application connects but will not list the files on the FTP server, eventually timing out (see Transmit log below) I think the issue is with the ABS and possible port mapping as I can successfully FTP Mac to Mac if the server is connected to the net through ethernet and not my ABS.
    Can anybody give me pointers as to what I need to do to solve this.
    Thanks
    Cmd: PASV
    227: Entering Passive Mode (82,44,16,203,15,9)
    connect failed: Connection refused.
    Falling back to PORT instead of PASV mode.
    Cmd: PORT 212,67,101,67,204,69
    200: PORT command successful
    Cmd: LIST
    Could not read reply from control connection -- timed out.
    G4 PB   Mac OS X (10.3.9)  

    Hi all,
    I have a problem trying to FTP from a Mac to a Mac through my ABS but can do so from a PC (windows machine).
    I have a webserver http://jeanmatthieu.free.fr/pureftpd/ installed on one of my Macs which is connected to the internet via my ABS (snow). My other Mac is connected to the net via a dial-up modem. I can successfully FTP to the Mac with a webserver using an FTP application on a PC, but am unable to successfully connect from a Mac using an FTP appllication (I have tried Transmit, Fetch, and Cyberduck). The Mac FTP application connects but will not list the files on the FTP server, eventually timing out (see Transmit log below) I think the issue is with the ABS and possible port mapping as I can successfully FTP Mac to Mac if the server is connected to the net through ethernet and not my ABS.
    Can anybody give me pointers as to what I need to do to solve this.
    Thanks
    Cmd: PASV
    227: Entering Passive Mode (82,44,16,203,15,9)
    connect failed: Connection refused.
    Falling back to PORT instead of PASV mode.
    Cmd: PORT 212,67,101,67,204,69
    200: PORT command successful
    Cmd: LIST
    Could not read reply from control connection -- timed out.
    G4 PB   Mac OS X (10.3.9)  

  • Can't download from the Mac app store

    Hi, 
    I was wondering if anyone else is having this issue. Anytime I try to download an app free or paid from the mac app store it goes to my doc but it doesn't download it just sits there and says it's waiting. also when I have an update for an app I click on it and enter my apple id and pass to update and nothing happends.  the store worked when I first got it and then one day it just stopped.
    how can I fix this? Do i have to reinstall the app store? I am running the latest version of snow leopard on a core i7 macbook Pro (early 2010) I also checked my firewall settings and nothing is blocking it from working.
    Thanks

    Then I would first try trashing these files and folder;
    ~/Library/Preferences/com.apple.appstore.plist
    ~/Library/Preferences/com.apple.storeagent.plist
    ~/Library/Preferences/ByHost

Maybe you are looking for

  • What's the best way to move files to new HD in the same PC?

    I just got a new bigger Hard drive and want to move all my iTunes files to it without having to make iTune search for them again. How should I do it? Will I have problems with the files I bough from iTunes store? Thanks IBM   Windows XP  

  • Export INTERNAL TABLE to shared buffer

    Hi all, My requirement: Export INTERNAL TABLE to shared buffer or SAP Memory. Any help will be appreciated. Can SET/GET parameter be adopted for internal tables? Thanks, Tabraiz

  • Text elements and selection screen

    I changed the selection screen using enhancement frame concept. But I can not change the selection text that displays on the selection screen. Does anybody know how to do it?

  • Acrobat can not open pdf email attachment

    Acrobat 8 Professional.<br /><br />A user gets this error message when he tries to open up a pdf email attachment:<br /><br />"Acrobat could not open <File Name> because it is either not a supported file type or because the file has been corrupted (f

  • How to uninstall the "default" Firefox plugins?

    I installed firefox from the extra repo. Sadly, it came with a bunch of plugins preinstalled (e.g., a Windows and Quicktime plugin). Primary reason I moved to Arch was to be able to install only what I want. This is not conducive to that. Anybody kno