I can't watch 4OD or Demand 5 using firefox. I used to be able to - now there is just a grey screen

I can watch 4OD and Demand 5 using Internet Explorer, but I get all the annoying adverts. I used to use iGoogle instead, which got rid of all the adverts, but recently this has stopped working, and now there is just a grey screen where the video should be. So I tried Firefox instead, which is just the same. I assume that Channel 4 and Channel 5 have done something to stop people watching their programmes on iGoogle or Firefox without having to endure the adverts. Is there any thing I can do. I run Windows 7 Home Premium on a standard Advent desktop.

I could not run anything on Demand 5 because of my IP adress - "THE VIDEO YOU ARE TRYING TO WATCH...), so I could not check further.
Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Similar Messages

  • Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603

    Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603 & 1611 appeared! please help me!!

    You may have a faulty USB cable. Try another.
    Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
    Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the iPhone.
    If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Select the device in iTunes and choose "restore from backup".
    If you still can't get it to work, you have done all you can and only Apple will be able to help.

  • HT2499 I ejected ACDs from my Mac Pro DVD player and now there is just a black screen with DVD player and the Apple insignia the bottom right corner. I can't get anything to turn on and shut this down. Got stuck. What do I do?

    On my MacBook Pro I finished using a CD and it ejected. Then I have a black screen just a DVD player showing on the bottom of a black screen. I can't do anything with my cursor at all nothing opens up and I don't know how to get that off the screen and start using the computer again – thanks for any help you can give me

    Hi there,
    You may need to force quit the application. Take a look at the article below for more information.
    Mac OS X: How to quit an unresponsive application using Force Quit
    http://support.apple.com/kb/ht3411
    -Griff W.

  • I have an iPhone 3gs and it used to show up on my computer, but now it shows up on my screen that it is charging however, does not appear in iTunes or My Computer so i can't sync it. Can anybody help? Thanks

    I have an iPhone 3gs and it used to show up on my computer, but now it shows up on my screen that it is charging however, does not appear in iTunes or My Computer so i can't sync it. Can anybody help? Thanks.

    Did you already make sure that Apple Mobile Device Service is installed and active on your computer?
    http://support.apple.com/kb/TS1567
    More troubleshooting about your device not recognized in Windows can be found here: http://support.apple.com/kb/TS1495

  • Using Firefox, I used to be able to open a document on a website and look at it without downloading.  Now, I must download a document in order to view it.  How can I change settings so that I can open documents without saving them?

    Using Firefox, I used to be able to open a document on a website, such as a bank statement, and view it without downloading.  Now, I must download and save a document before I can view it.  How can I change settings so that I can open documents without saving them first?

    Do you know what kind of docs they are? Did you upgrade/Update Firefox lately?
    https://addons.mozilla.org/en-US/firefox/addon/pdf-download/
    http://kb2.adobe.com/cps/333/333563.html
    https://addons.mozilla.org/en-US/firefox/addon/open-it-online/

  • All of a sudden I can not print my e-mail in firefox (I used to be able to) I can print if I copy and paste to MSW or do it in IE or a Web sight.

    All of a sudden I can not print my e-mail in firefox (I used to be able to) I can print if I copy and paste to MSW or do it in IE or a Web sight.
    == This happened ==
    Every time Firefox opened
    == About a month ago

    Is it possible you mistakenly clicked on a [Clear Layout] button?
    But a great hint is- Always click on the [Create a Saved Book] button, early in your new book design.
    Then you have a permanent link to the book in the Collections panel. (In addition to the standard collection of your selected images)
    Note: a Book Collection shows an icon that looks like a book.
    Every time you come back to edit the book, open the Book Module by clicking on the white arrow that appears on the end of your Book Collection title. (The title as saved)
    Re-opening a book without using the "Saved Book" option can have unpredictable results.
    A "Book" Collection is like a "Smart Collection" because anything you do to the book design, change pages, change images, etc,  is automatically updated in the Saved Book collection.

  • When i go to the app store to update the one app that needs to be updated, the screen is blank.  It used to list all the apps that need updating and have a button called update all.  Now nothing.  Just a blank screen.

    when i go to the app store to update the one app that needs to be updated, the screen is blank.  It used to list all the apps that need updating and have a button called update all.  Now nothing.  Just a blank screen.  How can I fix this?

    There's been a problem with this all day.  Seems to be a server problem  -  wait a day and try again, or use itunes on the computer to update, that works.

  • I just finished downloading and attempting the install of ios 7 on my iPhone 5.  I'm using the newest version of iTunes.  And now, I'm stuck at the screen with the iTunes logo and the plug.  But no matter what recovery mode wont work

    I just finished downloading and attempting the install of ios 7 on my iPhone 5.  I'm using the newest version of iTunes. 
    And now, I'm stuck at the screen with the iTunes logo and the plug.  But no matter how many times I try, recovery mode will not work.  My phone is currently useless unless I can figure this out.

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • I am using Firefox 3.6 on my PC , and now, when I select File New Tab (Ctrl+T), no new Tab shows up. Nor does it show up when I click the new Tab symbol next to my other tabs. How can I get the New Tab feature to work again?

    In the past 48 hrs, all of a sudden, the New Tab feature on my PC< using Firefox 3.56, simply stopped working. I did not change settings, or download a new version of Firefox. it just stopped working. There are other scenarios where it does still work (for example, if I want to open a link on a web page, I can right click and open the link in a new tab), but if I simply want to have multiple websites open at once on my PC, I am forced to have multiple versions of Firefox open, as my New Tab option seems to be disabled or something. Can you help?

    Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
    For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I have windows 7 and have been using Firefox for the last several months and now I can' open it up for some reason.

    I've been using firefox as my principle browser for quite some time. I normally just click on it once and it opens to the home page with google search in the middle of the page. I downloaded some e-mail attachment about a job and that's when it seemed to act up. I ran a scan on my computer and it says there is no problems but I still can't open up Firefox home page by clicking on the fox/world icon.

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Whenever I try to use Firefox I get a message cannot load page, this problem just started today, I can connect to the internet through Internet Explorer, what should I do?

    Today, whenever I try to use Firefox I get a message about Problem loading page. Cannot connect to internet, yet I can connect without any problems if I use Internet Explorer.

    See https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox

  • I've used Firefox for years w/no problem but now I can't get a window to open I still get the menu bar on top. When I try to click open a new window nothing happens. I have a Mac.

    I never have problems with Firefox before. I usually don't put my Mac on sleep mode but I did do that last night. I don't know if that caused the problem or not. I tried to restart my computer thinking that might help but it didn't.

    Try:
    *http://kb.mozillazine.org/Corrupt_localstore.rdf
    You can also try to move (delete) the Firefox plist file.<br />
    See [http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results]<br />
    Go to "Library > Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist).

  • Been using Firefox for years, yesterday not able to get Firefox page at all, page comes up blank

    I have been using Firefox for years. Somehow I seem to have blocked it. I get a blank page when trying to enter the site. What to do? thank you

    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    *Use a compressed image type like PNG or JPG to save the screenshot
    *Make sure that you do not exceed the maximum size of 1 MB
    Check the date and time and time zone in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
    Check out why the site is untrusted and click "Technical Details" to expand this section.
    If the certificate is not trusted because no issuer chain was provided (sec_error_unknown_issuer) then see if you can install this intermediate certificate from another source.
    You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
    *Click the link at the bottom of the error page: "I Understand the Risks"
    Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
    *Click the "View..." button and inspect the certificate and check who is the <b>issuer of the certificate</b>.
    You can see more Details like intermediate certificates that are used in the Details pane.
    If <b>"I Understand the Risks"</b> is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
    *Note that some firewalls monitor (secure) connections and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the website's certificate.
    *Note that it is not recommended to add a permanent exception in cases like this, so only use it to inspect the certificate.

  • ITunes update caused my iPhone to FAIL. I was only wishing to connect to my pc iTunes, then I was told I could upgrade to the latest iTunes for the mobile. Bad idea! I'm abroad, and now I'm stuck in grey screen-- how can I get my iPhone back?

    Please help me, I am verging on desperation! I am flying tomorrow, so I was only trying to add some music to my iPhone.
    During the process, connected to the latest version of iTunes for Windows, I was asked a seemingly innocent question-- would you like to
    update your iTunes for iPhone?  If only I could go back and ignore this question,
       But no, I am now stuck in purgatory-- no use of iPhone, at al! -- the upgrade FAILED. Perhaps because I'm in Asia? At any rate,
    I was told that I needed to reformat my phone to factory settings (losing all data!) That was the info on the pc. My phone would ONLY display
    a phone cord pointing to iTunes (beckoning to connect), but I was connected to the pc already. So I had to click to reformat.
       There was no other option, I browsed tha forums, was semi-assured that iCloud would help back me up. I heard about iTools,
    but that also proved a dead end.  My phone ended up in this grey screen, where choices are limited. They originally asked if I wanted to connect
    with iTunes, but I chose WIFI. I tried many times to "activate" the phone this way, and it always fails. ( I wanted to try activating through
    iTunes, but I can't go back to that original option. At times "Connect with iTunes" is only very briefly shown, but disappers before I can select
    it.)
      Every time I'm left with the message "Your iPhone (failed) bec. the activation server is temporarily unavailable. Try connecting phone to iTunes"
    But HOW?

    Why did you disconnect it?
    You will have to restore it.
    Your data is gone if you failed to make sure it was on your computer before updating, as you always should you.

  • I have used Firefox on this Apple (10.6) but now tend to use Safari. It is still in Applications but wont open.Ive tried down loading it again into computer but it wont accept it.

    I have an Apple running 10.6.
    Normal browser is Safari but want to use Firefox for something that it apparently runs better on.
    Firefox was used when I 1st got the computer & is still in Applications folder
    App's folder says its 10.2 MB
    Last modification date 25/08/2009
    I have tried to down load new version but pop-up window says;
    ''''''tutorial-note-07a.zip
    The operation couldn't be completed.(SafariErrorDomain error 0."''''

    I tried logging into my old account with add ons disabled... I still received this same message....
    Sorry, something went wrong.
    We’re working on getting this fixed as soon as we can.
    Note.. I also did a new password with the account and I know that is operating because it led me to this error message again... FB does not post this Sorry message as a common error message.. But I know from looking at forums that others have gotten this in the past.. I have no idea what is the problem.

Maybe you are looking for

  • Packing status becomes complete after using Pick HU

    Hi Experts, We use Pick HU for Outbound to pick products from warehouse to packing work center but as soon as we use pick hu in warehouse order for Out delivery and confirm the WO to pack center the status of packing becomes complete which should be

  • Hi  experts urgent

    hi all i have report in  ONE SERVER. In that  i am calling a zfunction module is a function module  which  is in another server.   in my report , there is a selection screen as agrrement number in <b><i>select option.</b></i> .i  ll give input to thi

  • I have jsdk2, but I can't compile servlet program

    I have jsdk2 version. which create in my c:\ dirve a folder jdk1.3. I do all the program from that. But I found that some of the class files of Servlet (servletRespose etc ) is missing. What I do to recover that. Even I can't compile any servlet prog

  • Error while loading javaGUI from BSP via Applet

    Hello Folks, i saw an interesting Thread by Thomas Jung (SAP) how to starting a R/3 Transaction via javaGUI from a Business Server Page. I did the same steps but get an Java Error while loading the applet. Can anyone help me? The error listed in the

  • SG300 series and CDP

    Hi, I noticed that the SG300 series of switches do not support CDP.  However, will these switches pass CDP packets onto an upstream device? Thanks