I CAN´T WRITE EN LOWERCASE EVEN I CLIC "CAPS LOCK

I CAN´T WRITE EN LOWERCASE EVEN I CLIC "CAPS LOCK", I RESTART THE COMPUTER, AND I ACCES TO "SAFE BOOT" BUT I CAN´T GO FAR BECAUSE MY PASSWORD IS IN LOWERCASE

Use an external keyboard to resetting your SMC and PRAM.
Resetting the System Management Controller >>
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

Similar Messages

Software stuck in capslock but the key is not stuck, can't log in now due to the caps lock. what should I do?

I was doing homework and the software started lagging, followed by all the font being stuck in caps lock. My keys are find and I could still turn the caps on/off. This had no effect; still caps. I used shift, still the caps stayed on. I restarted it and it pops up with "OS x safeboot" and asks for my password. I type it in accordingly and it's wrong because the caps are still on. I don't know what to do and I have an online test due soon ;( help?

I would first try compressed air to blow anything from under the key. More knowledgeable people will hopefully chime in, but a problem starting at a level as low as logging in would make me think that the contacts under the keys might be dirty. Do you have another keyboard that you can plug in?

TS4006 how can i find my ipod even though it's locked

Please i lost my ipod and it's i want to find can somebody please tell me how to find cause i have a lot of imortant things on it that i need and i need help quick tank you.

In Settings>iCloud you can turn on Find My iPhone service. If you hadn't done that, then there's no way to track its location. If you did turn that on (and assuming the device is not out of power, it's turned on, connected to wifi, and no one shut it down or turned off the service, then use a computer browser and log into icloud.com. There, go to the Find My iPhone page and see if it shows up in the map.
You say it's locked, that's good.

Lightroom crashed and now I can't open the catalog - even after deleting the lock file.

Lightrooms crashed, which is a common occurrance. But, this last time was different. After I restarted it my catalog was not linked and all my settings were gone. I tried opening the catalog through the file menu, but absolutely nothing happens. I tried going to the folder and clicking on it but this only opens lightroom with no catalog. After having scanned this forum I found that I need to delete the .lock file, but after doing that the same things happen. Any suggestions on how to open my catalog? Will reinstalling Lightroom help?

The problems mostly happen when I am using X-Y compare in Library mode. It shows black rectancles over the tops of the sections that contain the photos and these flash. They aren't always the same size, but are only on the top of the section - never big enough to completely cover the photos. Then I get anywhere from one to about four or five extra windows stacked on top of the Lightroom Icon at the bottom of my screen (I use Windows 8) opening and closing, though there isn't enough time for me to click on them and read them because my computer gets so slow that my mouse actin is delayed by a few seconds. And, to shut Lightroom down, I need to use Windows task manager because clicking on the little red box with the X in the upper right corner accomplishes nothing. I have a new Sony Vaio i5 chip and 8Gb RAM. This also hapened on my old computer, though not as often

Why does my MacBook start typing in upper case even though Caps lock is off?

On occasions, when typing, my MacBook starts to type in upper case even though the Caps lock is off? This is not a physical sticking of the shift key as it happens even when using a USB keyboard? I have to use the shift key kind of in reverse to revert to lowercase entry.
I have checked settings and I cannot find anything that could be causing it.
Really bloody annoying!
Can anybody help.
I have a two week old MBP w Retina Display. This did happen on my old MBP and I did restore this new MBP from my Time Capsule disk so assume I brought the problem with me so to speak.

Do you have "sticky keys" turned on under Accessibility by accident?

My text tool is all in capital letters even though caps lock is off.

My text tool is all in capital letters even though the caps lock button is off. Also I cannot click on the set fond style button. What seems to be the problem?

Hi Neale --
I am having the exact same issue, and it's a problem with any & all fonts I've tried. Of course, my keyboard's CAPS LOCK feature is OFF -- and I've tried many different font styles, nearly all of which allow for standard, non-ALL-CAPS usage.
I'm intending to use Century Gothic for the work I'm doing right now, but it's been an ongoing issue for at least a few weeks -- but I know I never had an issue with this before recently. (Note that I typically don't use or need the text tool for most of the photo editing work that I do w/PSE, so I'm not sure how long this has been an issue.)
In addition, I would like to access other font-setting-related features, like kerning, character spacing, small caps, & other adjustments, etc. -- but I don't see ANYWHERE within the program (or on this forum...or online) how to adjust these relatively standard settings.
Please help

How can I get a Caps Lock indicator to show on my Aspire E1 571?

I can't see any indicator to show if Caps Lock or Number Lock is on. There are no LEDs on the keyboard, the function key brings up a notification on screen but not caps or num lock. Thanks

I wanted to know the answer and found this solution when trawlling though the official aer site: This article only applies to: Windows 8 When pressing the Num Lock or Caps Lock on your keyboard, there is no notification to indicate the status. The on-screen indicators for Num Lock and Caps Lock are not available in Windows 8. Instead, it is possible to activate a beep signal when the key is pressed: Press theWindows () key to open the Start screen.. Type Control and select Control Panel.In the Control Panel, selectEase of Access.SelectChange how your keyboard works.EnableTurn on Toggle Keys.Click or tapOK to save the changes.

Can't write on SD card even first party apps

Since I updated my Xperia Z to the 4.4.4 kitkat using pc companion, I couldn't copy any file to SD card
Searching on Google I knew their is a restrictions for third party apps but even my first party apps can't write on my SD card (32 gb). Camera app can't save captured pictures to SD, file commander says error when I try to copy to SD.
I got a notification than is my internal is full with more than 75% space when try to transfer media to SD says error
I am really tired of this **bleep** tried factory reset, changing my SD card but didn't fix the problem.
When I mount SD card from settings then remount it works even with third-party apps but when I reboot the phone all files I copied to SD card is lost as I didn't even use it
I still can use file that is already on SD card and also can copy it to internal storage.
The sony's kitkat update really ruined my SD card, pls any help to fix this?

You may need to perform a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).

My phone is stuck between off and on. It has a white, slash circle going around and around. The button on top doesn't seem to do any good. The phone is only 31 days old. Please write back, I can't use it to even call in an emergency. Thank you

My phone is stuck between off and on. It has a white, slash circle going around and around. The button on top doesn't seem to do any good. The phone is only 31 days old. Please write back, I can't use it to even call in an emergency. Thank you

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

Can you write an excel file on client machine instead of on the server

I am trying to user cfSpreadSheet functon. The first question I have is, can you write the file on a client machine? I tried but they all end up on the server drive. Scecond question, is there a way to do row and column range formating in CF9.0? SpreadsheetFormatCellRange function is only available for ColdFusion server version 9.01.
Thanks.

To expand on Dan's answer: CF doesn't have any interaction with the client browser at all: client->server comms are handled by the client and the web server; the web server simply asks CF to provide the response data if the file requested is a CF file. But even then all CF does is process the requested file and return data to the web server.
Also, one of the restrictions of the HTTP protocol is that that there is *no* *way* that the server can write to the client machine. All it can do is send data to the client agent (eg: a web browser) in response to the client agent requesting it. Can you imagine the sort of security problems one would open one's self up to if a remote web server could write to your PC????
Adam

How can I Write a sine wave in an Access-file?

I measure a sine wave in LabView 6i. How can I write the datas automatically to an Acces-file, at the same time?
In my program, I managed it with Execute SQL.vi, I change a number in a SQL statement(String) -> after this I push start and then it writes the statement in the Access-file.
The problem is, it writes only one data per measurement in the file. How can I write all datas in the Access-file and measure the wave at the same time?
Thanks for help!
Attachments:
getwave.vi ‏49 KB

On the waveform palette, you will find a "to components" vi that you can break out the array of the waveform. You can then, using a for loop write all of the values from the waveform.
Better yet, there are examples in the database toolkit manual on pages 3-13 to 3-15 that deal with reading arrays (and even has a waveform example).
Good luck!

Hi, the problem of deleting files / videos seeds desktop to go into Terminal and then sudo rm-rf ~ /. Trash Pohangina the answers I've had e of someone in her forum but when I write procedures line in Terminal as the Krever my password and it can not writ

Hi, the problem of deleting files / videos seeds desktop to go into Terminal and then sudo rm-rf ~ /. Trash Pohangina the answers I've had e of someone in her forum but when I write procedures line in Terminal as the Krever my password and it can not write anything there, I write but nothing comes and my problem is not löst.När I want to delete the movie / video image Frin desktop still arrive Finder wants to make changes.Type your password to allow this. But even that I type my password file / video is left I need help in an easier way or another set-even those on the terminal that I can not type my password to solve the problem Regards Toni

If you want to preserve the data on the boot drive, you must try to back up now, before you do anything else.
There are several ways to back up a Mac that isn't fully working. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

Can I write photo captions in Elements 12 and upload the Photo to Revel, keeping the same Caption?

Can I write photo captions in Elements 12 and upload the Photo to Revel, keeping the same Caption?

Yes. Even if you edit Captions post uploading to Revel from Elements Organizer, the updated caption syncs to Revel.
Thanks
Andaleeb

[SOLVED]trying to mount disk so all users can read write

I'm trying to mount my hard drive to /mnt/2TB automatically at startup. My /etc/fstab looks like this...
/dev/sda2 / ext4 errors=remount-ro 0 1
/dev/sdb1 /mnt/2TB ntfs auto,exec,rw,users,uid=1000 0 0
ls / shows...
drwxrwxrwx 3 root root 4096 Jun 30 20:09 mnt
ls /mnt shows...
drwxrwxrwx 1 root root 4096 Jun 20 21:21 2TB
When I restart the disk mounts fine but I cannot write anything to disk. I want to mount this disk so that anyone can read, write, and execute on it. I specified these options in my fstab. What options am I missing?
EDIT:
I figured it out. I had to install ntfs-3g. Once I did that I changed my fstab to this...
/dev/sda2 / ext4 errors=remount-ro 0 1
/dev/sdb1 /mnt/2TB ntfs-3g defaults,uid=1000 0 0
Then I changed /mnt permissions to ...
drwxr-xr-x 3 root root 4096 Jun 30 20:09 mnt
Then I changed /mnt/2TB permissions to...
drwxrwxrwx 1 necbot users 4096 Jun 20 21:21 2TB
Works great!
Last edited by necbot (2014-07-02 00:07:43)

I ran across this in the ntfs-3g manual which might be of some interest. It appears that adding "permissions" to the mount options for ntfs-3g might accomplish roughly what you want, but you may have to perform some work to get it operational. Likewise, the Windows ACL may interfere and a quick glance seems to me to suggest that you might have to tweak things from Windows to get the permissions working well.
I personally have all of my Windows partitions mounted under /windows, but I can see why that isn't an ideal solution if you're dabbling in Arch or have things you want to more easily share in one direction.
Hope this helps somewhat even though you've already marked the topic as solved.

Can't edit PDF, not even select anything

Hello community!
I got a PDF that is not write-protected, not passworded, not restricted in any way from what my Acrobat 9 tells me, nor it does not seems to be PDF/X, PDF/E or PDF/A.
But I can not edit anything or even select text or objects. The pages are normal A4 pages with text and images, nothing scanned, created in Indesign CS5.5 (from the document properties), but exported
with something called Ghostscript.
Any clue what switch I need to toggle to make this refusing POS bend to my will?
Thanks in advance.

Does it definitely contain any text? You can test that by trying to copy/paste text. It could be outlined shapes (nasty, but often done).
Does it definitely contain images? A photo is an image but a logo might be drawn shapes.
What happens if you use the Touch-Up Object Tool (not Select Object Tool), then Edit > Select all?

I CAN´T WRITE EN LOWERCASE EVEN I CLIC "CAPS LOCK

Similar Messages

Maybe you are looking for