I can't write in hebrew

Hello everyone,
I recently bought the new version of Photoshop (CS6 13.0) and I have encountered a serious issue with the middle eastern languages. I have switched my text engine to middle eastern, enabled middle eastern features through the type menu, and changed my text direction to RTL (right-to-left) and yet, it still writes my Hebrew backwards (LTR).
I've searched the web, and haven't found anything useful yet. :/
If someone knows how to fix this, I will be graceful.
Thank you very much,
Tomer.

have you tried changing the text direction in the paragraph panels? as well as in the character direction?
To create content in Arabic and Hebrew, enable right-to-left (RTL) text direction. While RTL is the default direction of text, many documents also include left-to-right (LTR) text. You can seamlessly switch between the two directions.
If you have a mix of languages in the same paragraph, you can specify the direction of text at a character level. Also, to insert dates or numbers, specify the direction of text at the character level.
From the Character panel menu, choose Character Direction and then select a direction.
http://helpx.adobe.com/mena/using/arabic-hebrew.html#id_41125
janelle

Similar Messages

I can not write in Hebrew And create effects It shows all distorted When This problem solved?

I can not write in Hebrew
And create effects
It shows all distorted
When This problem solved?

roeisarusi wrote:
When This problem solved?
Nobody knows. iWorks apps have always had bugs that make them unsuitable for Hebrew/Arabic for most people. Tell Apple here:
http://www.apple.com/feedback/keynote.html

When I write in hebrew from right to left the periods/quotation marks/question marks at end of sentences jump to the beginning of the sentence. help

I cannot seem to format a message correctly when I write in hebrew from right to left
even if I press left margin and the message starts from the left side, all question marks, and end of sentences (periods, etc) jump to the front of the sentence and quotation marks or separation marks (such as dashes) split up the lines and jump words to the front of the sentence.
how can I change the formatting to solve this so the recipient receives a properly formatted email?

are you using in bidi add-on?
https://addons.mozilla.org/en-US/thunderbird/addon/bidi-mail-ui/

I can't write to my Drobo

I have a new iMac (like this):
I am trying to connect the Drobo that I used to use with my Windows Computer. It has 4 drives @ 3TB each, and the whole drive is over half full, so I am not terribly interested in the cost that it would take to "back up" that whole disk pack. It took some shenanigans (reboots of both the drive and the computer; disconnections, and reconnections; fiddling around with MAC Disk Utility) to get it to show up in Finder at all. I still have issues with it unmounting and needing to remount it, but that's not my main issue.
THE REAL PROBLEM:
Though I can get the Drobo to show up in finder, and I can read from it, I can't write to it. Based on some earlier searching I tried this terminal command, which helped it to show up in finder, but didn't seem to affect it's being read-only:
new-host-3:~ davidholcomb$ getfileinfo /Volumes/Drobo
directory: "/Volumes/Drobo"
attributes: avbstclinmedz
created: 12/10/2012 19:06:46
modified: 09/11/2014 03:37:07
Looking at another thread (partition map check failed because no slices were found), which I wandered into because I was getting this error in Disk Utility upon running Verify Disk because I got a failure when I tried to "mount" the drive in Disk Utility:
This thread suggested I try a couple additional Terminal Commands, which I will post the results of here:
#1: diskutil list
new-host-3:~ davidholcomb$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         121.0 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:          Apple_CoreStorage                         999.3 GB   disk1s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *1.1 TB     disk2
/dev/disk4
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *17.6 TB    disk4
   1:       Microsoft Basic Data Drobo                   17.6 TB    disk4s1
#2 diskutil cs list
new-host-3:~ davidholcomb$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 7DACBFD5-E22C-404B-98B1-99D97AD08B2F
    =========================================================
    Name:         Macintosh HD
    Status:       Online
    Size:         1120333979648 B (1.1 TB)
    Free Space:   114688 B (114.7 KB)
    |
    +-< Physical Volume F26F7717-B081-4312-8252-65C9E3040AD4
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     120988852224 B (121.0 GB)
    |
    +-< Physical Volume 414053B5-EFD8-4FC0-87CE-F3913D6E876B
    |   ----------------------------------------------------
    |   Index:    1
    |   Disk:     disk1s2
    |   Status:   Online
    |   Size:     999345127424 B (999.3 GB)
    |
    +-> Logical Volume Family BE5280EF-B093-4137-88A2-5AF3F1ACEFCC
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume D35043A0-F886-4223-81DD-4880F04ECEA3
            Disk:                  disk2
            Status:                Online
            Size (Total):          1114146996224 B (1.1 TB)
            Conversion Progress:   -none-
            Revertible:            No
            LV Name:               Macintosh HD
            Volume Name:           Macintosh HD
            Content Hint:          Apple_HFS
and #3: Mount:
new-host-3:~ davidholcomb$ mount
/dev/disk2 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
/dev/disk4s1 on /Volumes/Drobo (ntfs, local, nodev, nosuid, read-only, noowners)
Another user who had run these commands and posted the results, seemed to have been missing an EFI partition on their external drive and was asked to run this command and post results. But the thread with that user dies there. Here are my results of this command:
new-host-3:~ davidholcomb$ diskutil info disk4
   Device Identifier:        disk4
   Device Node:              /dev/disk4
   Part of Whole:            disk4
   Device / Media Name:      TRUSTED Mass Storage Media
   Volume Name:              Not applicable (no file system)
   Mounted:                  Not applicable (no file system)
   File System:              None
   Content (IOContent):      GUID_partition_scheme
   OS Can Be Installed:      No
   Media Type:               Generic
   Protocol:                 USB
   SMART Status:             Not Supported
   Total Size:               17.6 TB (17592186044416 Bytes) (exactly 34359738368 512-Byte-Units)
   Volume Free Space:        Not applicable (no file system)
   Device Block Size:        512 Bytes
   Read-Only Media:          No
   Read-Only Volume:         Not applicable (no file system)
   Ejectable:                Yes
   Whole:                    Yes
   Internal:                 No
   OS 9 Drivers:             No
   Low Level Format:         Not supported
Can anyone help me with a next step to make this drive read/writeable?

Turns out that the Drobo needs to be plugged straight into computer. I had it via hub. Though it has worked for the past couple weeks in this configuration, the new update pushed it over the edge, I guess. Plugged in directly and working fine.

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

Can you write an excel file on client machine instead of on the server

I am trying to user cfSpreadSheet functon. The first question I have is, can you write the file on a client machine? I tried but they all end up on the server drive. Scecond question, is there a way to do row and column range formating in CF9.0? SpreadsheetFormatCellRange function is only available for ColdFusion server version 9.01.
Thanks.

To expand on Dan's answer: CF doesn't have any interaction with the client browser at all: client->server comms are handled by the client and the web server; the web server simply asks CF to provide the response data if the file requested is a CF file. But even then all CF does is process the requested file and return data to the web server.
Also, one of the restrictions of the HTTP protocol is that that there is *no* *way* that the server can write to the client machine. All it can do is send data to the client agent (eg: a web browser) in response to the client agent requesting it. Can you imagine the sort of security problems one would open one's self up to if a remote web server could write to your PC????
Adam

How can I write to 4 different tables in database at the same time

I have .mdb file which has 4 tables for each hardware, I have a labview main program which calls 4 sub programs for each hardware, all these 4 subprograms run parallely.
One might finish one test early or late by milli seconds or seconds, the data has to be written to database file which has 4 tables inside.
I am planning to open reference in main program and use the reference in sub programs, I will write to Table 1 for first sub program , table 2 for second sub program and so on,
My question is can we write into one database file having 4 tables parallely/simulataneously? If no why?

Try it. It should work. As long as you are opening the database once, and passing the reference around, I don't see how it would not work.
You may run into troubles if two subvi's are trying to write simultaneously. If so, use semiphores to lock out the action until done.
Or you could use a producer consumer architecture where the producer would queue up the table name and data, and the consumer would write to the database. The producer can be replicated in each subvi. In other words, each subvi will contain its own enqueue code. All subvi's and the consumer loop would have to run in parallel.
- tbob
Inventor of the WORM Global

How and where can I write a subject matter in a reply I am doing,

How and where can I write a subject matter in a reply I am doing, I dont want the original subject matter and all I can see is the person to whom I am sending it and cc on the right?

What are you actually asking about use of webmail ?
*[[Problems with email and how to find help]]

Crystal Report XI: Can you write your query in SQL instead of using the GUI

Hello
In crystal report version XI, can you write your query in sqlplus and then use the crystal report designer to build your report instead of using the GUI . I would like to be able to go database and show sql query and open that query and make changes directly there, is that possible on this version, if yes is there a setting somewhere? Please let me know.
Thank you
alpha

Moved to Database forum.
No you can no longer modify the SQL directly. Use a Command Object to enter the SQL directly.
Thank you
Don

How can I write a program that compiles without warnings?

I tried the following with the 1.5 beta-compiler (build 28; I think):
class Y {
     public static final class Pair<X,Y> {
       private X fst;
       private Y snd;
       public Pair(X fst, Y snd) {this.fst=fst; this.snd=snd;}
       public X getFirst() { return fst; }
       public Y getSecond() { return snd; }
       public String toString() { return "("+fst+","+snd+")"; }
public static void main(String... args) {
     Pair[] pairArr = new Pair[10];              // supposed to be an array of Pair<Integer,Integer>
     for (int i=0; i<pairArr.length; i++)
         pairArr[i] = new Pair<Integer,Integer>(i,i);
     for (int i=0; i<pairArr.length; i++) {
         Pair<Integer,Integer> p = pairArr; // unchecked warning
     System.out.println(p);
     Integer first = p.getFirst();
     Integer second = p.getSecond();
// ... more stuff ...
It turns out that I get an unchecked warning when I extract an element from the array of pairs. Okay, that's fine. How can I avoid the warning? I had expected that an explicit cast would help.
Pair<Integer,Integer> p = (Pair<Integer,Integer> )pairArr;
With a cast I'm telling the compiler: "I _know_ what I'm doing; please trust me." But the compiler still issues a warning.
How can I write a warning-free program in this case? The only thing I can think of, is not using the parameterized type Pair in its parameterized form. But it's not the idea of Java Generics that I refrain from using parameterized types. What am I missing?

It turns out that I get an unchecked warning when I
extract an element from the array of pairs. Okay,
that's fine. How can I avoid the warning? I had
expected that an explicit cast would help.
Pair<Integer,Integer> p = (Pair<Integer,Integer>
)pairArr;
With a cast I'm telling the compiler: "I _know_ what
I'm doing; please trust me." But the compiler still
issues a warning. Yes, but at least you were able to change the warning from "unchecked assignment" to "unchecked cast" which is a little shorter ;-)
Seriously , since arrays of generic types are disallowed, there is probably no way to get rid of these warnings - which makes a strong point for eliminating "unchecked" warnings altogether (see the other thread "selectively suppressing compiler warnings")
Cheerio,
Gernot

How can I Write a sine wave in an Access-file?

I measure a sine wave in LabView 6i. How can I write the datas automatically to an Acces-file, at the same time?
In my program, I managed it with Execute SQL.vi, I change a number in a SQL statement(String) -> after this I push start and then it writes the statement in the Access-file.
The problem is, it writes only one data per measurement in the file. How can I write all datas in the Access-file and measure the wave at the same time?
Thanks for help!
Attachments:
getwave.vi ‏49 KB

On the waveform palette, you will find a "to components" vi that you can break out the array of the waveform. You can then, using a for loop write all of the values from the waveform.
Better yet, there are examples in the database toolkit manual on pages 3-13 to 3-15 that deal with reading arrays (and even has a waveform example).
Good luck!

Error while relocating (Can't write file (no space)) - Help please

I have been having trouble relocating master files since upgrading to Leopard. The problem doesn't seem to affect only Aperture. I can happen when using Finder or another application to move files from one drive to another. Other types of files don't seem to be affected, just my library of image files.
The copy operation runs for a while then hangs up. The application doing the copy reports an error that that's the end. Aperture gives this error message: Error while relocating (Can’t write file (no space)). The Finder reports plenty of available space on the destination drive!
I remember seeing a thread--but can't find it now--about a problem with certain xmp metatdata embedded into files causing problems with file operations.
Hoping for a solution!
Message was edited by: thomas80205

It's possible that you might have a corrupt file. Have you tried to copy different files on to the destination drive? If those files copy fine, then narrow down the offending file by copying less images at a time.

Can't write cache file for while creating domain in soa 11.1.1.5 on HP-UX

Hi,
Installing SOA 11.1.1.5 on HP-UX and during domain creation/configuration I am getting the below errors
**sys-package-mgr: can't write cache file for**
and have lots of cache file errors for different packages
Any idea what might be wrong and whats the cause of these errors and is it safe to ignore these errors if not what is the work arround. As I already looked at the below post but I don't find */var/tmp/wlstTemp* on my machine as suggested in the post below.
SOA 11.1.1.5 install got can't write cache file
So wondering if there's anything else I can do i.e. while creating or configuring a Domain pass some parameter to config.sh etc.
Thanks

Hi,
I don't see python.cachedir in config.sh. Here is config.sh
#!/bin/sh
mypwd="`pwd`"
# Determine the location of this script...
# Note: this will not work if the script is sourced (. ./config.sh)
SCRIPTNAME=$0
case ${SCRIPTNAME} in
/*) SCRIPTPATH=`dirname "${SCRIPTNAME}"` ;;
*) SCRIPTPATH=`dirname "${mypwd}/${SCRIPTNAME}"` ;;
esac
# Set the ORACLE_HOME relative to this script...
ORACLE_HOME=`cd "${SCRIPTPATH}/../.." ; pwd`
export ORACLE_HOME
# Set the MW_HOME relative to the ORACLE_HOME...
MW_HOME=`cd "${ORACLE_HOME}/.." ; pwd`
export MW_HOME
# Set the home directories...
. "${SCRIPTPATH}/setHomeDirs.sh"
# Set the config jvm args...
CONFIG_JVM_ARGS="${CONFIG_JVM_ARGS} -DCOMMON_COMPONENTS_HOME='${COMMON_COMPONENTS_HOME}'"
export CONFIG_JVM_ARGS
# Delegate to the main script...
"${WL_HOME}/common/bin/config.sh" "$@"Thanks

I can't write to usb stick [solved]

I've installed arch on my notebook yesterday. It took a few hours, but I got almost everything working correctly.
My issue is that when I plug in a usb stick, it gets automatically mounted, but I can't write to it.
I had the same issue with my ntfs data partition, but I solved it by adding an entry to /etc/fstab.
Unfortunately that won't be an efficient solution for usb sticks, since their partition type might vary.
/dev/sda1: LABEL="arch" UUID="6c7ecf62-2ffb-4bfe-9af0-39d7cdb89751" TYPE="ext4" PARTUUID="000e19e1-01"
/dev/sda2: LABEL="swap" UUID="ff87fb8b-773b-45ca-9198-c2abf9a1a017" TYPE="swap" PARTUUID="000e19e1-02"
/dev/sda3: UUID="AAACDC9DACDC657B" TYPE="ntfs" PARTUUID="000e19e1-03"
/dev/sda4: LABEL="Dados" UUID="EC60740C6073DC30" TYPE="ntfs" PARTUUID="000e19e1-04"
/dev/sdb1: UUID="2013-11-01-08-10-26-00" LABEL="ARCH_201311" TYPE="iso9660" PTUUID="0d738582" PTTYPE="dos" PARTUUID="0d738582-01"
[hfluz@hfluz-arch ~]$ sudo fdisk -l
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x000e19e1
Device Boot Start End Blocks Id System
/dev/sda1 2048 398753791 199375872 83 Linux
/dev/sda2 398753792 402948095 2097152 82 Linux swap / Solaris
/dev/sda3 402948096 1399447551 498249728 7 HPFS/NTFS/exFAT
/dev/sda4 1399447552 1953519615 277036032 7 HPFS/NTFS/exFAT
Disk /dev/sdb: 14.8 GiB, 15879634944 bytes, 31014912 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0d738582
Device Boot Start End Blocks Id System
/dev/sdb1 * 0 1056767 528384 0 Empty
/dev/sdb2 84432 147919 31744 ef EFI (FAT-12/16/32)
My usb stick is /dev/sdb.
Anyone already had the same problem?
Last edited by hfluz (2013-11-11 16:40:38)

MW wrote:Check your groups, you should be in the storage group.
https://wiki.archlinux.org/index.php/Users_and_Groups
I don't think that the storage group covers this. All USB storage devices that I have seem to come up as being part of the disk group. You should really not make your user part of the disk group.
If you read the post, and saw the info provided by the OP, you would see that he/she is trying to write to an iso, which is read-only.

Windows error msg: "Can not write to drive G: Joe's iPod"

Halfway thru the download process (1780 songs) from itunes to my ipod I get a windows error msg:
"Can not write to file G: Joe's ipod. All the data has been lost. Check for an error on your computer or network."
Getting the error msg: " Can not write to drive G: Joe's ipod. All data has been lost, your computer or network may have failed."
"Windows/ My computer" shows my ipod as drive G: and itunes starts up properly when I plug my ipod into my firewire port. About halfway thru the download (1780 songs) the transfer from itunes to my ipod stops and I get the above error message. (Never worked with USB). I am not on a network.
According to tech supt, I have:
-Installed Service Pack 2,
-Restored ipod to factory settings
-Installed update 5.0.1. Everything worked fine last Feb with the version 4 of itunes when I first loaded everything up.
Have tried to reinstall version 4, but no luck.
My ipod charges fine thru the firewire cable.
Any ideas?? Thanx anyone.

Joe,
I am having the same problem, did you ever solve it, please email me at [email protected] with any help
Thanks

I can't write in hebrew

Similar Messages

Maybe you are looking for