I can't write reviews
There's been an error. I can't write reviews.
It says:
"We cannot complete your Music Store Request. The server was not found.
There was an error in the Music Store. Please try again later."
can anyone help me get this fixed?
I had it fixed now
Similar Messages
-
Recent, I have a few apps having problems. I just want to write it on the apps review. I go to the reviews of the apps, and click write a review. First it will pop-up a box with my Apple ID already on the box where I just need to enter password. After I entered password, it will pop up another message box to request me password. This time it also says, "AOL members can sign in using their AOL username and password." Then I click the "Sign In" button on the bottom to enter password again. Then it will just pop up the "AOL" message box again, and I just repeating the same procedure. I tried to input different password. It will reply the password is incorrect immedicately. Thus, I can't write review for any apps now.
I wonder this may happend since the last update of the IOS, and then I have a few apps encoutered problems.Your profile indicates your Mac as v10.8.1 installed.
If that is correct, updating your system software may help the review issue.
Either click Software Update from your Apple menu
Or open System Preferences > Software Update and click Check Now. -
Everytime I try to write a review for an app the App Store keeps barraging me with Apple ID/Password requests. It will accept my password and run for about 2 minutes and ask me for it again. One review, which didn't go through, asked me for my password three times.
Your profile indicates your Mac as v10.8.1 installed.
If that is correct, updating your system software may help the review issue.
Either click Software Update from your Apple menu
Or open System Preferences > Software Update and click Check Now. -
I can't write reviews in the app store
I want to review apps on the app store, but it won't let me.
many months ago I reviewed an app. my very first review. and since then I haven't been able to submit reviews.
the review form doesn't have the "name" part, and I don't know why. the name part is usually by the title part, but it's not there.
sorry if this is in the wrong community, but please help me.Hi
I am having the same problem. When I go to the App store to review an App the review section tab dead ends with a blank review screen. I cannot view other reviews nor add a review. Haven't had this problem before in reviewing Apps! Help! Does the problem reside with Apple or me? Someone please respond! -
Can't able to write reviews in the AppStore
Hi everyone,
I have used AppStore a long time and I never had problem like this. Once all my reviews from iTunes was removed and even in my iTunes account setting there is no Review section under my iTunes nickname. So now I can't leave review for the apps that I purchased or downloaded for free. I've tried to contact with iTunesTechSupport and they said that I can't able to write reviews anymore. And I guess that this was happened after when I wrote a negative review for one app.
I just wanna ask is there any way to resolve this problem? Has anybody here seen this? I'm planning to go in the Apple Store and talk with someone about it but I don't know is this good idea?
Thank you!Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.
If that doesn't solve it then I've also seen suggested going into Settings > General > Date & Time and change the date to a few months in the future and then re-trying -
I have tried to write reviews for both temple run 2 and tiny monsters and they both didn't work but I just thought it was because the review was too long so I tried it again with a shorter review but it still didn't work and then just on a random other app that I didn't really want to review and it still didn't work. Can anyone please help me, Thanks.
Make sure you are signed into the account that purchased it. If the app is on your phone but you are signed into an account that didn't purchase it then it won't let you review the app.
-
How can I write an iBook review without using iTunes?
I have a problem on how can I write a review on an iPad book or iBook without using iTunes. Some of my friends are also asking me on how can I write a review on an iBook without using iTunes. I am on dilemma and I need your help to solve this problem. I hope you can respond soon if possible. Thanks.
Simple, you cannot. You can only post reviews through the store front gateway.
Well, actually, you can write the review in any editor or tool you wish to use, but to post it, you have to login to the store account. If you do not have an AppleID and store account, you cannot post a review. -
No able to write reviews in app store from Iphone 6
Hi,
I'm not able to write reviews for the app I have purchased from app store. When I open write review tab and click on title then screen goes blank and not able to see what i type and also send button is disabled when i write something.
Please suggest what can be done.
Thanks,
YaswanthI Have the same problem full wifi connection everithing wirking safari etc, after i open appstore my internet is down but the wifi signal is still full. I call applecare in hungary but nobody listen and they sad its close in the weekend. I just upgrade my i5s for 6 plus and thos one ruin everithing nothing want to work. I was a iphone maniac not anymore thanks for apple getting like android. Hopefully microsoft make something because this is unaccectable for a 700 € phone.
And im curious abot why like that so many millions of dollar and my old phones 4 5 5s working and this brick is not!!!!!!
if nothing happend i have still 7 days to give back the phone and buy nexus 250€ cheaper. Very very disappointed!!!!!!!
sorry for my bad english
contact me -
How do you write reviews on iTunes from the computer, or can you? I would like to write a review on a series of lectures I found on iTunesU but cannot find where to do this.
Normally there will be a "write a review" link in the Customer Reviews section on the page for the class in iTunes U.
Regards. -
How can i write a Pl/sql Programme for a calender
hi all,
How can i write Pl/sql programme (may be function) for a calendar ,like after the programme is created if call the function at the prompt and give the year 2099 so on, it should display the result with all the 12 months (months and days.)
Please email the answer to
[email protected]
or send the link for the answers.
ThxWell, you can start off by reviewing the SYSDATE command and the TO_DATE and TO_CHAR functions. Also, review addmonths etc.
http://www.unix.org.ua/orelly/oracle/prog2/ch14_01.htm
Cheers -
Why can't i review an app in the app store using my ipad2
When I want to click on write a review it opens the same page again so I can't write a review using my ipad2.
Please see this thread.
-
I have a new iMac (like this):
I am trying to connect the Drobo that I used to use with my Windows Computer. It has 4 drives @ 3TB each, and the whole drive is over half full, so I am not terribly interested in the cost that it would take to "back up" that whole disk pack. It took some shenanigans (reboots of both the drive and the computer; disconnections, and reconnections; fiddling around with MAC Disk Utility) to get it to show up in Finder at all. I still have issues with it unmounting and needing to remount it, but that's not my main issue.
THE REAL PROBLEM:
Though I can get the Drobo to show up in finder, and I can read from it, I can't write to it. Based on some earlier searching I tried this terminal command, which helped it to show up in finder, but didn't seem to affect it's being read-only:
new-host-3:~ davidholcomb$ getfileinfo /Volumes/Drobo
directory: "/Volumes/Drobo"
attributes: avbstclinmedz
created: 12/10/2012 19:06:46
modified: 09/11/2014 03:37:07
Looking at another thread (partition map check failed because no slices were found), which I wandered into because I was getting this error in Disk Utility upon running Verify Disk because I got a failure when I tried to "mount" the drive in Disk Utility:
This thread suggested I try a couple additional Terminal Commands, which I will post the results of here:
#1: diskutil list
new-host-3:~ davidholcomb$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *121.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 121.0 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 999.3 GB disk1s2
3: Apple_Boot Recovery HD 650.0 MB disk1s3
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh HD *1.1 TB disk2
/dev/disk4
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *17.6 TB disk4
1: Microsoft Basic Data Drobo 17.6 TB disk4s1
#2 diskutil cs list
new-host-3:~ davidholcomb$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 7DACBFD5-E22C-404B-98B1-99D97AD08B2F
=========================================================
Name: Macintosh HD
Status: Online
Size: 1120333979648 B (1.1 TB)
Free Space: 114688 B (114.7 KB)
|
+-< Physical Volume F26F7717-B081-4312-8252-65C9E3040AD4
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 120988852224 B (121.0 GB)
|
+-< Physical Volume 414053B5-EFD8-4FC0-87CE-F3913D6E876B
| ----------------------------------------------------
| Index: 1
| Disk: disk1s2
| Status: Online
| Size: 999345127424 B (999.3 GB)
|
+-> Logical Volume Family BE5280EF-B093-4137-88A2-5AF3F1ACEFCC
Encryption Status: Unlocked
Encryption Type: None
Conversion Status: NoConversion
Conversion Direction: -none-
Has Encrypted Extents: No
Fully Secure: No
Passphrase Required: No
|
+-> Logical Volume D35043A0-F886-4223-81DD-4880F04ECEA3
Disk: disk2
Status: Online
Size (Total): 1114146996224 B (1.1 TB)
Conversion Progress: -none-
Revertible: No
LV Name: Macintosh HD
Volume Name: Macintosh HD
Content Hint: Apple_HFS
and #3: Mount:
new-host-3:~ davidholcomb$ mount
/dev/disk2 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
/dev/disk4s1 on /Volumes/Drobo (ntfs, local, nodev, nosuid, read-only, noowners)
Another user who had run these commands and posted the results, seemed to have been missing an EFI partition on their external drive and was asked to run this command and post results. But the thread with that user dies there. Here are my results of this command:
new-host-3:~ davidholcomb$ diskutil info disk4
Device Identifier: disk4
Device Node: /dev/disk4
Part of Whole: disk4
Device / Media Name: TRUSTED Mass Storage Media
Volume Name: Not applicable (no file system)
Mounted: Not applicable (no file system)
File System: None
Content (IOContent): GUID_partition_scheme
OS Can Be Installed: No
Media Type: Generic
Protocol: USB
SMART Status: Not Supported
Total Size: 17.6 TB (17592186044416 Bytes) (exactly 34359738368 512-Byte-Units)
Volume Free Space: Not applicable (no file system)
Device Block Size: 512 Bytes
Read-Only Media: No
Read-Only Volume: Not applicable (no file system)
Ejectable: Yes
Whole: Yes
Internal: No
OS 9 Drivers: No
Low Level Format: Not supported
Can anyone help me with a next step to make this drive read/writeable?Turns out that the Drobo needs to be plugged straight into computer. I had it via hub. Though it has worked for the past couple weeks in this configuration, the new update pushed it over the edge, I guess. Plugged in directly and working fine.
-
I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy -
Can you write an excel file on client machine instead of on the server
I am trying to user cfSpreadSheet functon. The first question I have is, can you write the file on a client machine? I tried but they all end up on the server drive. Scecond question, is there a way to do row and column range formating in CF9.0? SpreadsheetFormatCellRange function is only available for ColdFusion server version 9.01.
Thanks.To expand on Dan's answer: CF doesn't have any interaction with the client browser at all: client->server comms are handled by the client and the web server; the web server simply asks CF to provide the response data if the file requested is a CF file. But even then all CF does is process the requested file and return data to the web server.
Also, one of the restrictions of the HTTP protocol is that that there is *no* *way* that the server can write to the client machine. All it can do is send data to the client agent (eg: a web browser) in response to the client agent requesting it. Can you imagine the sort of security problems one would open one's self up to if a remote web server could write to your PC????
Adam -
How can I write to 4 different tables in database at the same time
I have .mdb file which has 4 tables for each hardware, I have a labview main program which calls 4 sub programs for each hardware, all these 4 subprograms run parallely.
One might finish one test early or late by milli seconds or seconds, the data has to be written to database file which has 4 tables inside.
I am planning to open reference in main program and use the reference in sub programs, I will write to Table 1 for first sub program , table 2 for second sub program and so on,
My question is can we write into one database file having 4 tables parallely/simulataneously? If no why?Try it. It should work. As long as you are opening the database once, and passing the reference around, I don't see how it would not work.
You may run into troubles if two subvi's are trying to write simultaneously. If so, use semiphores to lock out the action until done.
Or you could use a producer consumer architecture where the producer would queue up the table name and data, and the consumer would write to the database. The producer can be replicated in each subvi. In other words, each subvi will contain its own enqueue code. All subvi's and the consumer loop would have to run in parallel.
- tbob
Inventor of the WORM Global
Maybe you are looking for
-
Object reference not set to an instance of an object - SSIS package in Visual studio
I am trying to set ODBC connector as source in connection manager. I get the test connection as successful. But I am not abe to get the tables or views populated under drop down selection within ADO NET SOURCE. It works with old ODBC connections but
-
PO field not appearing while posting Vendor Invoice
Hello, While posting an entry using FB01/ F-43, for posting key 31(Vendor Invoice), despite making Purchasing Document (Purchase Order) field optional in the field status group of both the posting key 31 as well as the Reconciliation (GL) Account, th
-
When syncing iToiuch I receive an error "disk cannot be read from or written to".
When syncing iToiuch I receive an error "disk cannot be read from or written to". Sync fails at step 3 of 6.
-
What RAM do I need and where can I get it from?
Hi all, I know this is probably a simple question, but I just want to make sure I don't mess up my computer! I have an old school DV iMac, and bought the Mac OS X upgrade not too long after it came out (which is rather a while ago now!), but couldn't
-
HTTPS config in SOAP receiver adapter ?
Hi Guys, I have configured the soap receiver adapter with the URL *https://xxxx.abcd.com/xyzv/bbbb.asmx with the user authentication * I have tested the url and the user and pw in the browser and they are working fine but the messages are failing th