I can't zoom with the scroll pad within Finder

It worked fine in Snow Leopard, but not Lion. Any help?

I HAVE SOLVED THE PROBLEM FINALLY!!!
Somehow I knew that this was a software problem so I tried to find a solution by deleting the apps one by one... the problem was caused by an app called QuickDo, after I've deleted QuickDo everything was fine. The strangest thing is that I've been using QuickDo for 3 months and everything was working perfectly, until sudenly this problem occurred...

Similar Messages

HT203171 Track pad is erratic, sometimes scrolling without touching the pad. Also highlighting chunks of my Thesis with the touch of a finger. Frustrating because I have accidentally deleted during this out of control mechanism with the track pad.

My Mac Book Air has developed an erratic process with the track pad. Sometimes the page scrolls without touching the pad, great chunks of my Thesis can be highlighted and sometimes I delete without realising. Does anyone else have this problem. The Tech wants to replace my track pad today, not sure what to do?

See if any of these items apply:
http://support.apple.com/kb/TS1449
Regards,
Captfred

HT2477 Just bought a Mac book and the set up is with the Voice over key commands,how do you switch this off as it is painfull to use and use the scroll pad

Just bought a Mac book and the set up is with the Voice over key commands,how do you switch this off as it is painfull to use and use the scroll pad?

It's the button (key) that is labelled Control.
Each of the modifier keys and similar keys has its own symbol; this makes listing command keys easier to do. The Command key is usually the only key which has its symbol printed on the key. If you open Keyboard Viewer (in the Input menu, the one which displays the flag in the main menu bar), you can see what symbol refers to which key.

Can't zoom with trackpad in safari how can i solve that?

Help please!!!
can't zoom with trackpad in safari how can i solve that?

There are two places on settings where you can tunr zoom on or off for the trackpad.
They both need to be on for it to work.
The first is under: system preferences>trackpad>scroll & zoom, then you just need to chekc the box to turn zoom on. ( this is the one you already have checked i think)
The second is under: system preferences>universal access>seeing, then check the box that says zoom.
Hope this helps.

How do you Play audio only OAM file with the scroll in Muse ?

Hi guys,
I am building a pretty cool site that shows off a telescopic pole with scroll animation ..
I am trying to add the audio of the pole telescoping with the scroll when the pole section scrolls on ..
Check out the site at : http://www.multi-pole.com
Thank you
Harrison

Hello,
Suppose you have a symbol instance named 'mysound_track' inside your stage.
After embedding the OAM in Muse, you can try the following snippet on scroll event
var comp = document.getElementById('<OBJECT ID>').contentWindow.AdobeEdge.getComposition("<COMPOSITION ID>");
var sym = comp.getStage().getSymbol("mysound_track");
sym.stop(time); //Seek to the required time position
sym.play();
Notes:
Replace ObjectID, CompostionID, time as required
To make sure that Object tag is loaded, you can initiate the communication from Object tag by using window.parent property

HT1657 How can I turn off the scrolling movie ads in itunes store?

How can I turn off the scrolling movie ads across the top of the screen when I open the itunes store and am in the movies section?

Thanks varjak paw.
I was afraid this was the case. To the degree that Apple marches down this well-travelled road towards making money by trying to pound customers into submission with flashing ads, etc. that actually serve only to aggravate and drive away at least people like me (28 year user of macs) from both Apple and whatever is being advertised, and indeed get in the way of my being able to efficiently do what is my part of what I always thought was the core of the synergism between Apple and its customers -- them innovating to provide the best tools to help us to be creative and productive, then the company will find itself sharing that space with myriad other companies so bankrupt for ideas and innovation that they have no other possible strategy that to promote mindless consumerism. That does not seem a place of strength for Apple and a complete forfeiting of its unique position. Sad to watch.

MENU's are coming with the scroll bar

Hi,
I have a problem like this, I am migrating one menu file from a forms6i to 10G after that i tried to put that menu in the form then i found that the menus are coming with the scroll bar is there any parameter so that i can set that to false so i can see all the menus at one time.
Thanks in advance.
Saravanan.K

below is my code.
Display will have some graphics, the mouse click on the part of the graphics will produce different values in the table. class DatabaseDataDisplay has the JTable who display the values.
Display.addMouseListener(new MouseAdapter()
{ public void mousePressed(MouseEvent evt)
//get the location of the mouse
          int x = evt.getX();
          int y = evt.getY();
          current = find(x, y);
if(current!=-1)
DatabaseDataDisplay D_Display=new DatabaseDataDisplay(Table_Name, current);
                                   //remove the old panel
                    WholePanel.remove(scrollPane5);
          //add the new DataPanel
JScrollPane scrollPane5 = new JScrollPane(D_Display,
JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,
JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
WholePanel.add(scrollPane5, new GridBagConstraints(0, 1, 1, 1, 1.0, 1.0,GridBagConstraints.CENTER, GridBagConstraints.BOTH, new Insets(0, 2, 0, 2), 659, 5));
/*if I put a repaint() here, the value on the table will always the values of the first time values when I click the mouse*/
WholePanel.validate();

I have inserted a mini cd in my Mac Book Pro and cannot eject it. I have tried re-starting with F12 depressed and re-starting with the mouse pad depressed.

I have inserted a mini cd in my cd drive but the drive did not detect it; I am unable to eject the cd. I have tried re-starting with F12 depressed and also re-starting with the mouse pad depressed.
I am in a country where I belive there is no Apple support - Azerbaijan.
Apart from a tin opener, any other methods for extracting the mini cd.
I only found out that mini cds are not suitable after inserting this one and then reading 2 help manuals!!!

Take it to a place that repairs computers if you're not close to any apple authorized dealer.
You user guide clearly states that you can not use smaller CDs in your Macbook.
Lesson learned. Hopefully a repair shop can get it out for you.
Do not try to take it out yourself. You might cause more damage than good to your macbook.
Good luck.

I can't zoom with finger pinch( 2 fingers)

I can't zoom with finger pinch( 2 fingers) in photos, safari and google maps on iphone 4s...
Does anyone have any idea what may be the problem?

I HAVE SOLVED THE PROBLEM FINALLY!!!
Somehow I knew that this was a software problem so I tried to find a solution by deleting the apps one by one... the problem was caused by an app called QuickDo, after I've deleted QuickDo everything was fine. The strangest thing is that I've been using QuickDo for 3 months and everything was working perfectly, until sudenly this problem occurred...

I have the i-pad 'Apple Pages' app that needs updating but i keep getting the message that this app is incompatible with the i-pad. What's the deal?? updating.

why can't I update the i-pad specific app "Apple Pages". I keep getting a message that says this app is incompatible with the i-pad. I don't know how to fix this. makes it really inconvenient to up other apps......I have to do them one at a time since I can't remove "Pages" from the update list.

I had the same problem , u have to update to iOS 5 since the pages app has updates that are made to work
With the new iOS .

Having trouble with the touch pad responding when I click it on the macbook pro I have to click it about 3 to 4 times before it works

has anyone had trouble with the touch pad on the macbook pro not working properly. I have to click it 3 or 4 times befre it responds. Can these be replaced?

Your MacBook Pro has enough compute power to do airframe stress analysis modeling or weather forecasting. This is not a computational issue.
Most USB printers do the imaging on the Mac, then send the stream of bits to the printer. The speed of doing this depends on the Printer driver.
Some drivers will image the page in "slices", and then pause to image the next slice after the first one completes. This may also depend on whether you have enough RAM memory available to do the imaging for a whole page at a time.
You have not mentioned what Printer, or whether this is indeed the latest driver for it.

HT5815 Updated to 10.8.5 and now I cannot control my macbook pro with the track pad. Any solutions?

Like any other time, the App Store said there was a new update and asked if I wanted to update now. I did. Unfortunately, the update, after rebooting, has rendered the system unusable. I can no longer control the system with the track pad. The arrow is moving itself around the screen and the Launchpad periodically opens itself and gets locked in that mode. I've rebooted, launched in safe mode, and zapped PRAM. Nothing has changed. I experienced the same thing in safe mode, no change. Anyone else having these problems? Not sure what to do next.

There are several possible causes for this issue. Take each of the following steps until it's resolved.
1. Follow the instructions in this support article, and also this one, if applicable.
2. Open the Bluetooth preference pane in System Preferences and check for unknown or forgotten input devices. Disconnect any USB input devices that you aren't using.
3. Boot in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you reboot as usual, stop here and post your results. If you can't boot in safe mode, do the same. If you booted in safe mode and there was no change, go on to the next step.
4. Reset the System Management Controller.
5. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
6. A swollen battery in a MacBook Pro or Air can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
7. Some people have reported that they fixed a malfunctioning trackpad by pressing down on all four corners at once. I can't confirm, but it does no harm to try.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

How can I print with the black and white cartridge only?

I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
The printer is out of ink.
The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
How can I print with the black and white cartridge only?
Mac OSX 10.7.3
HP Photosmart C7280 (7200 series)
This question was solved.
View Solution.

I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!! I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
You should be ashamed!!

Slave instance can not synchronized with the master for a long time

Hi,
Slave instance can not synchronized with the master for a long time, and the gap of LSNs between slave and master are more and more larger. The transfer bytes per second between master and slave is 118MB/s , upper limit to the ethernet card. Why???
ENVIRONMENT:
1. A network program which we called mcdb is based on BDB 4.8.30. It is used to accept get/set requests and then query data from bdb or save data to bdb.
2. mcdb implements replication with bdb replication manager api. The default start replication policy is DB_REP_ELECTION, rep ack policy is DB_REPMGR_ACKS_ONE_PEER and rep priority is 100.
3. The bdb data files, bdb log files, region files and rep files are all in the same home directory.
4. There are two instances of the mcdb are separately on two standalone servers which has no other programs. These two instances are in one replication group which can elect a master automatically.
5. The master instance is online, which has lots of requests (get, set, delete).
ACTIONS:
1. Start two mcdb instances on two servers and the two instance make a replication group. Slave has already synchronized with the master.
2. Stop the slave for a long time (more than 20 hours).
3. Start the slave instance to synchronize data with master.
RESULT:
1. the gap of LSNs between slave and master are more and more larger.
2. db_stat of master and slave:
master db_stat:
467170     Number of PERM messages not acknowledged
9245     Number of messages queued due to network delay
172415     Number of messages discarded due to queue length
25880     Number of existing connections dropped
3407     Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.146 (eid: 0, port: 30011)
Environment configured as a replication master
331726/3574994     Next LSN to be used
0/0     Not waiting for any missed log records
328872/466092     Maximum permanent LSN
0     Next page number expected
0     Not waiting for any missed pages
0     Number of duplicate master conditions originally detected at this site
2147M     Current environment ID (2147483647)
100     Current environment priority
49     Current generation number
50     Election generation number for the current or next election
2323     Number of duplicate log records received
0     Number of log records currently queued
6768     Maximum number of log records ever queued at once
55284     Total number of log records queued
120M     Number of log records received and appended to the log (120475988)
111     Number of log records missed and requested
2147M     Current master ID (2147483647)
2     Number of times the master has changed
0     Number of messages received with a bad generation number
8505306     Number of messages received and processed
12     Number of messages ignored due to pending recovery
471869     Number of failed message sends
12M     Number of messages sent (12959945)
0     Number of new site messages received
1     Number of environments believed to be in the replication group
990543     Transmission limited
0     Number of outdated conditions detected
0     Number of duplicate page records received
0     Number of page records received and added to databases
0     Number of page records missed and requested
Startup complete
6244678     Number of transactions applied
0     Number of startsync messages delayed
1     Number of elections held
1     Number of elections won
No election in progress
0.057097     Duration of last election (seconds)
8944103     Number of bulk buffer sends triggered by full buffer
0     Number of single records exceeding bulk buffer size
5273M     Number of records added to a bulk buffer (5273592170)
10M     Number of bulk buffers sent (10490865)
0     Number of re-request messages received
0     Number of request messages this client failed to process
0     Number of request messages received by this client
slave db_stat:
0     Number of PERM messages not acknowledged
0     Number of messages queued due to network delay
0     Number of messages discarded due to queue length
1454     Number of existing connections dropped
0     Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.147 (eid: 0, port: 30011)
Environment configured as a replication client
329544/2916048     Next LSN expected
330433/2013808     LSN of first log record we have after missed log records
329543/5500501     Maximum permanent LSN
0     Next page number expected
0     Not waiting for any missed pages
0     Number of duplicate master conditions originally detected at this site
2147M     Current environment ID (2147483647)
100     Current environment priority
49     Current generation number
50     Election generation number for the current or next election
5256M     Number of duplicate log records received (5256599432)
3925284     Number of log records currently queued
3925285     Maximum number of log records ever queued at once
4880561     Total number of log records queued
3578038     Number of log records received and appended to the log
1912297     Number of log records missed and requested
0     Current master ID
1     Number of times the master has changed
0     Number of messages received with a bad generation number
12M     Number of messages received and processed (12980442)
2     Number of messages ignored due to pending recovery
0     Number of failed message sends
1912307     Number of messages sent
0     Number of new site messages received
0     Number of environments believed to be in the replication group
0     Transmission limited
0     Number of outdated conditions detected
0     Number of duplicate page records received
0     Number of page records received and added to databases
0     Number of page records missed and requested
Startup incomplete
110568     Number of transactions applied
80     Number of startsync messages delayed
0     Number of elections held
0     Number of elections won
No election in progress
0     Number of bulk buffer sends triggered by full buffer
0     Number of single records exceeding bulk buffer size
0     Number of records added to a bulk buffer
0     Number of bulk buffers sent
0     Number of re-request messages received
0     Number of request messages this client failed to process
0     Number of request messages received by this client
Edited by: 899585 on 2013-1-4 下午10:54
Edited by: 899585 on 2013-1-4 下午10:55

Hi,
Unfortunately, this issue is beyond the level of what is supported over the forum. Performance related issues are extremely complex and require an in-depth understanding of your environment and dedicated support. In a generic sense, you can look at this as a basic queueing problem. You have a server that went down and work is still coming in. When the server gets started it is possible that it may never catch up depending on new work coming in and the rate at processing the old work.
So what would you do in this case --- one thing would be to reduce the new work coming in. In HA terms this would be slowing the master down and you can increase DB_REP_ACK_TIMEOUT for this. Another thing you could do is add fresh servers to help reduce the workload. In HA terms, this would be the equivalent of restarting the client and give it a fresh look at everything. Another thing you could do is replan the system and load balance. In HA terms, it would mean something like take a hot backup of the master and reinit a client from scratch.
If you are interested in getting a dedicated support person working on this concern, please let me know and we can move forward down that path. Just respond to the thread with your email address and I will get in contact with you so we can pursue that approach.
thanks
mike

I have LabView but I do not have the Calibration and Configuration Palette,and I could not download it, how can I download it or if i cannot,can I work with the NI-DAQ Calibration_1200?

I have read in a tutorial for the board 1200 that I can calibrate it with the Calibration and Configuration Palette in LabVIEW, but I do not have them and I could not download it to access its libraries, so I can only download the NI-DAQ software,What's my best choice and if it is to download the palette with its libraries, how can download it with them?I'd appreciate your answers

If you wish to use your 1200 device in LabVIEW, you must download and install NI-DAQ. When you install NI-DAQ, it will ask you if you would like to install support for LabVIEW. By installing this support, you will then have access to the DAQ pallette in LabVIEW. The DAQ pallette requires that you have NI-DAQ installed.
For more information on installing and using your device, you can refer to the DAQ Quick Start Guide. You can download it from:
http://digital.ni.com/manuals.nsf/14807683e3b2dd8f8625677b006643f0/0eca53fe80911b1f862568560068295d
Regards,
Erin

I can't zoom with the scroll pad within Finder

Similar Messages

Maybe you are looking for