I can use a modem 3G in the AirPort express, put it in gate USB of the equipamentos?

No. The USB port on the AirPort Express is designed to be used only for a USB printer.

Similar Messages

Im trying to download the new itunes so i can use my iphone 5 , however , the new itunes requires Mac OS X 10.6.8 or later and i cant seem to install that onto my imac even after searching for the new update (my imac is currently on 10.5.8.

.Im trying to download the new itunes so i can use my iphone 5 , however , the new itunes requires Mac OS X 10.6.8 or later and i cant seem to install that onto my imac even after searching for the new update (my imac is currently on 10.5.8.

You have already seen that you cannot load the new iTunes into your 10.5.8, so as Neil says, you need Snow Leopard (current cost £14). And you'll probably need to update the disc you buy via the combo update, though that is free.
As far as the new iTunes is concerned, there's been a certain amount of grumbling so you may want to study the forums before you update. The main problem has been with album artwork which does not transfer easily.

Hi i can use my mobile number on the receipt to imessages

Hi i can use my mobile number on the receipt to imessages

Settings > Messages > Send & Receive > Start New Conversations From > Select your cell phone number.
If someone addresses an iMessage to an email address that you have selected under - you can be reached by iMessage at, the reply will be from that email address.

I can use my Playstation 4 on the mac?

I can use my Playstation 4 on the mac?

Settings > Messages > Send & Receive > Start New Conversations From > Select your cell phone number.
If someone addresses an iMessage to an email address that you have selected under - you can be reached by iMessage at, the reply will be from that email address.

HT3131 I would like to darken my Mac Air screen, so I can use may external display and the keyboard on the notebook--it is possible on a PC-does it work on a Mac?

I would like to darken my Mac Air screen, so I can use may external display and the keyboard on the notebook--it is possible on a PC-does it work on a Mac?

Sure it's possible.
Go to System Preferences (under the Apple logo on the top left of the menu).
Choose "Display". There's a slider bar for the screen brightness. Adjust it and you're all set.

Hi, folks can some body help me¡ How I can use de second code to the Itunes card to use the Itunes card.... My number is vanished, how i can submit my Itunes card?

Hi, folks can some body help me¡ How I can use de second code to the Itunes card to use the Itunes card.... My number is vanished, how i can submit my Itunes card?

iTunes Store: Invalid, inactive, or illegible codes
http://support.apple.com/kb/TS1292

And 'can use for commercial purposes Gallaria the images in photoshop?

and 'can use for commercial purposes Gallaria the images in photoshop?
type print shirts

If the images belong to you or you are using images that you were given permission to use such as public domain images. The other requirement (as far as I know) is photoshop is not the student/teacher version.
There is an eula on the main web page of Adobe that you can read. Just search for it. Be specific with the search for example eula for lightroom or eula for Photoshop CC 2014.

How can I set up a wi-fi network, using one time capsule and two airport express

how can I set up a wi-fi network, using one time capsule and two airport express ?
The time capsule is near the Mac. ok
The first Airport is on the corridor, ok, works well and the App on the iPad signals so, ok
But when I plug the next Airport on another room nearby nothing happens, and signals disconected ....
is the signal so weak that is not able to go to ono room to the other ?

Well, even if you have the first express set up to extend the network, the second express can only extend from the TimeCapsule.
Maybe you got walls of sheetrook in the way, or kitchen/bathroom tiles, etc, dampening the signal rapidly.

I want to use a Netgear router instead of Airport Express...

I'm trying to create a network of my Mac and my wife's Windows (Vista) laptop, really just so we can print wirelessly from the laptop.
Currently my cable broadband modem is linked to Airport Express which "feeds" the Mac. I'd like to remove the Airport (whose range I imagine will be insufficient) and replace it with a Netgear DG834G wireless router, then add the laptop to the network.
I've looked around this site but haven't found any advice that addresses this particular issue and am hesitant to start changing things for fear of losing my online connection and also my access to the good people on this forum.
Can someone point me to any pages that address my query?

Basically all you need do is power everything down; modem, router, computers. Then power up in 2 minute sequences; modem, router, computers in turn. However, you should read the manual of your new Netgear router so you set it up properly. Having gone through this I can say it is quit easy. Don't use the CD supplied. Connect your Mac to one of the router's LAN ports; power the router and the Mac. Launch a web browser. You should get the router's admin page. default user name is 'admin'. Default password is 'password'. You should at least change the password so no one outside can gain access to your router. Then you should change the name of the SSID to whatever you want to call your network. Then you should set up your wireless access password protected. Then power every thing down and set up the network as above. There are tweaks you can add. If you have issues post back.

Should i buy modem separately after buying airport express?

Should i buy modem separately after buying airport express?

It depends entirely upon the way you wish to connect to the Internet.
First of all, an AirPort Express does not contain a modem.
If you have access to the Internet through a direct LAN (Ethernet) connection, no separate modem is needed.
If the Internet connection is through DSL (ADSL), your Internet service provider should supply a DSL modem (this modem may be combined with a router/switch). Ensure that the modem has an Ethernet port if you want to use it with an AirPort Express base station.
For a cable (TV) Internet connection, the Internet service provider would supply a modem. Make sure that this modem has an Ethernet port if you wish to use an AirPort Express as a base station.
For mobile broadband (3G or 4G) there are different solutions, such as a USB mobile broadband modem or a mobile broadband hotspot. A USB mobile broadband modem stick is for direct use with a computer (often with special software) and cannot be connected to the USB port of an AirPort Express. A mobile broadband hotspot converts the mobile broadband to local Wi-Fi, which can be received by a computer having Wi-Fi capabilities. In principle, an AirPort Express (n) could be configured to connect to a hotspot as well.
Please post back with details about the intended setup, Internet service type, et cetera if you need additional information.
Jan

I have a 1st generation AirPort Extreme and want to create a guest network, can I? If so, how? Can I do this by adding an Airport Express?

I have a 1st generation AirPort Extreme and want to create a guest network, can I? If so, how? Can I do this by adding an Airport Express?

I have a 1st generation AirPort Extreme and want to create a guest network, can I?
This version of the AirPort Extreme does not have guest network capability.
Can I do this by adding an Airport Express?
Why not simply buy a new Airport Express.....which does have main and guest network capability*.....and sell the AirPort Extreme?
* The AirPort Express will need to connect to a simple modem.....not a modem/router or gateway type of device.....for the guest network feature to work correctly.

Can't get itunes to connect to airport express via air tunes

Hi,
I just bought and installed an airport express (for windows 7) everything is now connected but i can't get itunes to recognize my airport express via air tunes. I can see the multiple speakers in itunes, but when i click on it to connect to airport it just comes up with connecting, loads for about a minute then minimizes without connecting.
Has anyone else experienced this? How can i get this to work?
Message was edited by: Toddy85

You've probaby solved this by now, but if not... When upgrading itunes on a Vista or Windows 7 machine with Windows Firewall running for some reason Bonjour can't get through the firewall and thus Airplay does not work. Not good when all your Hi-fi's are connected via airport express!
I found to resolve the issue you have to install an older version of Bonjour. It won't work if you try to do this straight from Apple. So try this...
1. Firstly install and older version of itunes from the web (say version 10.1) Try www.oldapps.com
2. Then find the Bonjour file in program files
3. Cut and paste it to your desktop with its contents
4. Uninstall itunes and Bonjour via your control panel (the desktop file of Bonjour you moved will still be there).
5. Install your new version of itunes, say version 10.5, from the apple website.
6. Before opening it go to program files and cut the (newly installed) Bonjour file and paste it somewhere different to the desktop (you can't just delete it). It does not matter where you won't be needing it.
7. Now Cut and paste the old version of Bonjour you stuck on the desktop in Program files in place of the one you just moved.
8. Hey presto, Airplay, Windows firewall and your Airport Express' should all get on again.
Hope this works...
Jim

Can i transmit music from iphone to airport express without being connected to internet?

can i transmit music from iphone to airport express without being connected to internet? just from phone to express via local network or whatever it's called.

Do you mean Lan cable? Can this be done wirelessly from itunes to airport express without the internet connections? I can't connect to an airport express that's not connected to the internet.

How do I direct all internet traffic I on my firefox portable browser I use at school, through to my computer at home, so I can use my modem as a proxy?

My school has a web filter that prevents me from accessing any website I want to at school, and I want to get past it.
I know, from experience, that I can use a program called Ultrasurf to get around this, though it requires me to use IE, and is inconvenient.
I want to know if it's possible to configure the proxy settings on Firefox (and some on my modem/router, and/or computer at home), in order to direct all my traffic through my router at home, similarly to how one would use a proxy.
If so, how is this possible?
(I'm relatively experienced with computers, but have very little programming, and other complex knowledge of the workings of these things)
At home, my computer is running 64 bit Windows 7, has 4 GB of RAM, a 2.1GHz Intel Core 2 Duo processor, and can be turned on and online 24/7, such that if necessary, it can direct traffic sent to it.
My router/modem at home is (I believe) a Westell 327W, I can get more information by looking at it later if necessary.
At school, as of last year (and probably the same this year), the computers run Windows XP, and I am able to run programs installed on a flash drive on them, though cannot actually install programs on the computers themselves.
I'll be using whatever the latest (not beta) version of Firefox Portable exists when I return to school in a week.

My school has a web filter that prevents me from accessing any website I want to at school, and I want to get past it.
I know, from experience, that I can use a program called Ultrasurf to get around this, though it requires me to use IE, and is inconvenient.
I want to know if it's possible to configure the proxy settings on Firefox (and some on my modem/router, and/or computer at home), in order to direct all my traffic through my router at home, similarly to how one would use a proxy.
If so, how is this possible?
(I'm relatively experienced with computers, but have very little programming, and other complex knowledge of the workings of these things)
At home, my computer is running 64 bit Windows 7, has 4 GB of RAM, a 2.1GHz Intel Core 2 Duo processor, and can be turned on and online 24/7, such that if necessary, it can direct traffic sent to it.
My router/modem at home is (I believe) a Westell 327W, I can get more information by looking at it later if necessary.
At school, as of last year (and probably the same this year), the computers run Windows XP, and I am able to run programs installed on a flash drive on them, though cannot actually install programs on the computers themselves.
I'll be using whatever the latest (not beta) version of Firefox Portable exists when I return to school in a week.

How we can use class and methods for the FM of reuse_alv_list_display

Hi Abapers,
Please provide the sample code of class and method of REUSE_ALV_LIST_DISPLAY.
Which Class i can use for this Function module.
I need to write a code using OOPS concept.
I was done the GRID display using this class cl_gui_alv_grid.
But i want only List Display using the class & methods.
Plz provide sample code.
Thanks
Nani.

Hi Nani,
This is the sample code..
*& Report Z_OO_ALV
*& We can Use Two containers in OOALV
REPORT z_oo_alv LINE-COUNT 50.
*types gt_struct type sflight.
DATA BEGIN OF gt_struct.
INCLUDE STRUCTURE sflight.
DATA rcol(4) TYPE c.
DATA colors TYPE lvc_t_scol.
DATA END OF gt_struct.
*ALV GRIDs
DATA gr_alvgrid TYPE REF TO cl_gui_alv_grid.
DATA gr_alvgrid1 TYPE REF TO cl_gui_alv_grid.
DATA gc_custom_control_name TYPE scrfname VALUE 'CC_ALV'.
DATA gc_custom_control_name1 TYPE scrfname VALUE 'CC_ALV1'.
*CONTAINERs
DATA gr_ccontainer TYPE REF TO cl_gui_custom_container.
DATA gr_ccontainer1 TYPE REF TO cl_gui_custom_container.
*FIELDCATALOGs
DATA gt_fieldcat TYPE lvc_t_fcat WITH HEADER LINE.
DATA gt_fieldcat1 TYPE lvc_t_fcat WITH HEADER LINE.
*LAYOUTs
DATA gs_layout TYPE lvc_s_layo.
DATA gs_layout1 TYPE lvc_s_layo.
DATA pt_exclude TYPE ui_functions. "internal table declaration to be passed.
*DATA pt_cell TYPE lvc_t_cell with header line.
DATA : gt_list LIKE gt_struct OCCURS 50 WITH HEADER LINE,
gt_list1 LIKE gt_struct OCCURS 50 WITH HEADER LINE.
*DATA v_ucomm TYPE sy-ucomm.
CALL SCREEN 100.
*& Module display_alv OUTPUT
text
MODULE display_alv OUTPUT.
PERFORM display_alv.
ENDMODULE. " display_alv OUTPUT
*& Module PAI INPUT
text
MODULE pai INPUT.
CASE sy-ucomm.
WHEN 'EXIT'.
PERFORM exit_program.
WHEN 'PICK'.
PERFORM cell_info.
ENDCASE.
ENDMODULE. " PAI INPUT
*& Form display_alv
text
FORM display_alv.
PERFORM prepare_field_catalog CHANGING gt_fieldcat[].
PERFORM prepare_layout CHANGING gs_layout.
PERFORM data_retrival.
IF gr_alvgrid IS INITIAL.
CREATE OBJECT gr_ccontainer
EXPORTING
container_name = gc_custom_control_name
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
ENDIF.
CREATE OBJECT gr_alvgrid
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
i_parent = gr_ccontainer
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM exclude_tb_functions CHANGING pt_exclude.
PERFORM set_col.
CALL METHOD gr_alvgrid->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = gs_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
it_toolbar_excluding = pt_exclude "excluding toolbar functions
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
it_outtab = gt_list[]
it_fieldcatalog = gt_fieldcat[]
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE.
CALL METHOD gr_alvgrid->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
PERFORM prepare_field_catalog1 CHANGING gt_fieldcat1[].
PERFORM prepare_layout1 CHANGING gs_layout1.
PERFORM data_retrival1.
IF gr_alvgrid1 IS INITIAL.
CREATE OBJECT gr_ccontainer1
EXPORTING
container_name = gc_custom_control_name1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
ENDIF.
CREATE OBJECT gr_alvgrid1
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
i_parent = gr_ccontainer1
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM set_col1.
CALL METHOD gr_alvgrid1->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = gs_layout1
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
it_outtab = gt_list1[]
it_fieldcatalog = gt_fieldcat1[]
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE.
CALL METHOD gr_alvgrid1->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. "display_alv
*& Form prepare_field_catalog
text
-->GT_FIELDCAT text
FORM prepare_field_catalog CHANGING pgt_fieldcat TYPE lvc_t_fcat.
DATA ls_fieldcat TYPE lvc_s_fcat.
ls_fieldcat-tabname = 'gt_list'.
ls_fieldcat-fieldname = 'CARRID'.
ls_fieldcat-scrtext_m = 'Air line code'.
ls_fieldcat-col_pos = 0.
ls_fieldcat-outputlen = 10.
ls_fieldcat-emphasize = 'C400'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO pgt_fieldcat.
ls_fieldcat-tabname = 'gt_list'.
ls_fieldcat-col_pos = 1.
ls_fieldcat-fieldname = 'CONNID'.
ls_fieldcat-scrtext_m = 'Connection code'.
ls_fieldcat-emphasize = 'C900'.
APPEND ls_fieldcat TO pgt_fieldcat.
ls_fieldcat-tabname = 'gt_list'.
ls_fieldcat-fieldname = 'PRICE'.
ls_fieldcat-scrtext_m = 'PRICE'.
APPEND ls_fieldcat TO pgt_fieldcat.
ENDFORM. "prepare_field_catalog
*& Form prepare_layout
text
-->GS_LAYOUT text
FORM prepare_layout CHANGING gs_layout TYPE lvc_s_layo.
gs_layout-stylefname = 'FIELD_STYLE'.
gs_layout-zebra = 'X'.
gs_layout-grid_title = 'FLIGHT'.
gs_layout-sel_mode = 'A'.
gs_layout-ctab_fname = 'COLORS'.
ENDFORM. "prepare_layout
*& Form data_retrival
text
FORM data_retrival.
SELECT carrid
connid
price
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE gt_list
UP TO 50 ROWS.
ENDFORM. "data_retrival
FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD gr_ccontainer->free.
CALL METHOD gr_ccontainer1->free.
LEAVE TO SCREEN 0.
ENDFORM. "exit_program
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STAT'.
SET TITLEBAR 'xxx'.
IF W_CUSTOM_CONTAINER IS INITIAL.
**sets TITLEBAR
PERFORM TITLEBAR.
ENDMODULE. " STATUS_0100 OUTPUT
*& Form prepare_field_catalog1
text
-->GT_FIELDCAT text
FORM prepare_field_catalog1 CHANGING pgt_fieldcat1 TYPE lvc_t_fcat.
DATA ls_fieldcat TYPE lvc_s_fcat.
ls_fieldcat-tabname = 'gt_list1'.
ls_fieldcat-fieldname = 'SEATSMAX'.
ls_fieldcat-scrtext_m = 'MAX. SEATS'.
ls_fieldcat-col_pos = 0.
ls_fieldcat-outputlen = 10.
ls_fieldcat-emphasize = 'C400'.
ls_fieldcat-key = ' '.
APPEND ls_fieldcat TO pgt_fieldcat1.
ls_fieldcat-tabname = 'gt_list1'.
ls_fieldcat-col_pos = 1.
ls_fieldcat-fieldname = 'SEATSOCC'.
ls_fieldcat-scrtext_m = 'SEATS OCCUPIED'.
APPEND ls_fieldcat TO pgt_fieldcat1.
ENDFORM. "prepare_field_catalog
*& Form prepare_layout1
text
-->GS_LAYOUT text
FORM prepare_layout1 CHANGING gs_layout1 TYPE lvc_s_layo.
gs_layout1-stylefname = 'FIELD_STYLE'.
gs_layout1-zebra = 'X'.
gs_layout1-grid_title = 'DETAILS'.
gs_layout-sel_mode = 'C'.
gs_layout1-info_fname = 'RCOL'.
gs_layout-no_toolbar = 'X'.
ENDFORM. "prepare_layout
*& Form data_retrival1
text
FORM data_retrival1.
SELECT seatsmax
seatsocc
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE gt_list1
UP TO 50 ROWS.
ENDFORM. "data_retrival
*& Form exclude_tb_functions
&---- subroutine to exclude toolbar options -
text
-->PT_EXCLUDE text
FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions.
DATA ls_exclude TYPE ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_maximum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_minimum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_subtot.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_sort.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_sum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_mb_subtot.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_mb_sum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_mb_filter.
APPEND ls_exclude TO pt_exclude.
ENDFORM. "data_retrival1
*& Form cell_info
text
FORM cell_info. "CHANGING pt_cell TYPE lvc_t_cell.
DATA lt_cell TYPE lvc_t_cell WITH HEADER LINE.
CALL METHOD gr_alvgrid->get_selected_cells
IMPORTING
et_cell = lt_cell[].
LOOP AT lt_cell.
WRITE : lt_cell-col_id , lt_cell-row_id.
ENDLOOP.
MODIFY pt_cell[] from lt_cell[].
ENDFORM. "cell_info
*& Form set_col
text
FORM set_col .
DATA ls_cellcolor TYPE lvc_s_scol.
LOOP AT gt_list.
IF gt_list-price GT 500.
ls_cellcolor-fname = 'PRICE'.
ls_cellcolor-color-col = 5.
ls_cellcolor-color-int = 1.
ls_cellcolor-color-inv = 0.
APPEND ls_cellcolor TO gt_list-colors.
else.
ls_cellcolor-fname = 'PRICE'.
ls_cellcolor-color-col = 3.
ls_cellcolor-color-int = 1.
APPEND ls_cellcolor TO gt_list-colors.
ENDIF.
MODIFY gt_list.
ENDLOOP.
ENDFORM. "set_col
*& Form set_col1
text
FORM set_col1.
data : ind type sy-tabix,
indx type sy-tabix.
loop at gt_list1.
ind = sy-tabix / 2.
indx = sy-tabix - ind.
if indx eq ind.
gt_list1-rcol = 'C500'.
endif.
MODIFY gt_list1.
endloop.
ENDFORM. "set_col
*FORM TITLEBAR.
*SET TITLEBAR 'TITLE'.
*ENDFORM.
*double click on TITLE and write ur title
Thanks,
Samantak.
Rewards points for useful answers.

I can use a modem 3G in the AirPort express, put it in gate USB of the equipamentos?

Similar Messages

Maybe you are looking for