I can use my password just to open my session i can't do with it nothing else (no updates, no downloads,...)

i can use my password just to open my session i can't do with it anything else (no updates, no downloads,...)

Sorry to ask but... are you absolutely certain you have entered your Apple ID and account password correctly?
If you use the same Apple ID for iCloud and the iTunes store, see if you are able to log into the iTunes store from either your computer or your iPod.

Similar Messages

Not able to open mail from my mac, gmail repeatedly asking for password. but using same password able to open gmail on safari

not able to open mail from my mac, gmail repeatedly asking for password. but using same password able to open gmail on safari

okay well they got me to take out some .plist files to see if that would help it didn't. I'm not sure what ones that they deleted for my self maybe someone here would be abel to tell you what ones to take out but didn't work the one that came close to working was this going into keychain and deleting the account(s) then reading them again.
if you are to do this please back up first with Time Machine. You can do this with a usb drive.
Okay so go back to where you had internet accounts and make sure mail is shut. click the - on the account your having problems with then quit system preferences.
Okay so then press cmd and space bar at the same time then type 'keychain access' into the search then click on 'keychain access'
once it is open go to the top of the window and put your email address that you are having problems with.
once you have put in your full email, have a look at what comes up i deleted things in the kind colome with 'internet password' and anything with under name that had smtp.gmail.com or imap.gmail.com so it would look like this, map.gmail.com - internet password.
right click and delete them. make sure not to touch any other files that dont say them things on them.
Once you have done this quit keychain access and then restart the computer, once the computer is restarted go back to system preferences and internet accounts and re-add the account.
Hope this helps. if something is not clear just ask.

After upgrading my I-Pad I now have to use a password everytime I open it. How do I delete using the password to get into my i-pad?

After upgrading my I-Pad I now have to use a password everytime I open it. How do I delete using the password to get into my i-pad?

Thank you,
out of the five helps -
your's was the most explicite
and it worked.
Thank you so much,
Susan

HT1752 I recently purchased an old iMac G3 Macintosh. I was wondering, is there a way where I can update it without using an external disc? I've seen the newer Apple products with the dock, if I update my iMac G3, will it have that, and if so, how can I d

I recently purchased an old iMac G3 Macintosh. I was wondering, is there a way where I can update it without using an external disc? I've seen the newer Apple products with the dock, if I update my iMac G3, will it have that, and if so, how can I do that?

I was wondering, is there a way where I can update it without using an external disc?
If you mean the iMac does not have an internal optical drive capable of reading DVDs, the only option requires another Mac with a DVD-capable drive and FireWire ports. Your iMac G3 will also require FireWire ports. Not all G3 iMacs have Firewire. FW started with the Summer 2000 models with 400mHz and faster processors.
With FireWire, you can use FireWire Target Disk mode to install from a retail OS install DVD in another Mac. If you supplemental info info tells us if you have another Mac with a DVD reader and the FW ports, we can walk you through the process.
If the iMac has a tray-loading drive, I'd forget it. They are very limited not only in the OS max (10.3.9) but also in RAM capability. Starting with the slot-loading iMac G3s, the max RAM increased to 1 GB (2 X 512MB modlules). Tiger likes 1GB RAM.
Understand that pre-Intel Macs are getting harder to use. Even with 10.4.11, your choice of browsers is limited (TenFourFox is the most viable option) and the G3s rudimentary video hardware means web browsing will be choppy at best.
If you are in the USA, you can try calling the Apple Store (1-800-MY-APPLE) for an OS disk. As recently as Jan 20, someone posted here that they were able to buy Tiger by calling. It was not clear whether the disks were replacement system install/restore disks or full retail install, but it's a free call.
When you do "About this Mac" to check teh OS verion, also look at the processor speed and tell us what that says. That can help with recommendations for an upgrade path.

When I open iWeb it does not "Highlight" the New site or new page options. It ahs had this issue for over a year! I have tried uninstalling and re-installing it. What do I do? It opens the tutorial video, then when you close it, nothing else is clickable.

When I open iWeb it does not "Highlight" the New site or new page options. It has had this issue for over a year! I have tried uninstalling and re-installing it. What do I do? It opens the tutorial video, then when you close it, nothing else is clickable.

Open iPhoto, select a couple of photos and use the Share ➙ iWeb ➙ Photo page menu option. That has jump started iWeb for others. I could take a couple of tries.
If that doesn't work try the following:
1 - delete the iWeb preference file, com.apple.iiWeb.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iWeb folder.
Click to view full size
3 - launch iWeb and try again.
OT

I'm unable to steam flash videos in Firefox. I can view youtube videos, but nothing else. Some videos take forever to load and my webpages are starting load slo

I can view youtube videos, but nothing else. Some videos take forever to load and my webpages are starting load slowly as well.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Safari is not connecting to internet on my iPad. Says "could not open the page becuase the server stopped responding." Everything else that updates over wireless connection is working fine. Get same response on any site I try to visit. Need Help!

Safari is not connecting to internet on my iPad. Says "could not open the page becuase the server stopped responding." Everything else that updates over wireless connection is working fine. Get same response on any site I try to visit. Need Help!

I am having identical problem on my iPhone 4 running iOS6. Did NOT experience this issue prior to upgrade.

When i open firefox, a window pops up saying i have either opened or closed another window in firefox even tho nothing else is opened... how can I get it to sto

When I open Firefox, a window pops up saying I have either opened or closed another window in Firefox even tho I haven't and nothing else is opened. I have to close that window to continue. How canI get it to stop?

Are you using the Default Theme? ''If not, switch to the Default Theme.''
If it isn't a problem with a 3rd party Theme, try the Firefox SafeMode. 
''A troubleshooting mode, which disables most other Add-ons.''
# You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

When I power up my mac, I see the white screen and the apple icon. After a few seconds of powering up the screen goes dark. Yet I still can the mouse arrow but nothing else.

When I power up my Imac, I see the white screen and the apple icon. After a few seconds the screen goes dark. I am able to still see the mouse arrow as I move it around. But nothing else. What is the problem and how do I recover?

Try this from another user:
1. Shut the computer down by holding the power button for 10 seconds
2. Restart the computer and press shift at the same time until you see the progress bar start moving
3. Once you reach the point where your screen goes dark and you see the cursor, type the first letter of the username for your computer, then hit Enter, then type your password, then hit Enter.
4. After a moment, you should see the spinning beach ball
5. Your screen should then move on to something along the lines of "Completing OSX Installation" (I can't remember the exact wording). Let it finish. After that it should go to your normal desktop and the issue should be fixed. (If your screen goes pitch black during this process, hit the space bar. I thought it wasn't working, but the screen was just sleeping).

Whenever i try to switch on my iPod it just gives me a message to go to ipod support and nothing else

whenever i try to switch on my iPod it just gives me a message to go to ipod support and nothing else

First, try doing a reset (to restart the iPod)
http://support.apple.com/kb/ht1320
If that just goes back to the error message, try putting the iPod into Disk Mode
http://support.apple.com/kb/HT1363
If that works, connect it to the Mac and run iTunes. iTunes may say something about "recovery" and prompt you to do a Restore on the iPod. That could mean the iPod's storage has some type of data corruption, and needs to be erased, and its software reinstalled.
Unfortunately, (if the iPod does not go into Disk Mode) the most likely cause for this on a "classic" iPod that uses a hard drive for storage, is a faulty hard drive.

I am using a new Mini Mac via HDMI, I get the First gray screen then nothing else

I am a First time user of a Mac and I've gone toturn it on fr the first time today, i conected it to a HD ready LCD tv via HDMI and get the first gray 'loading' screen then an 'English' over the speekers then nothing else
Any help would be apreciated

Make sure the TV's menu is actually set to connect to that HDMI port.
Make sure the TV is 1080p and is setup to use that resolution on the HDMI port in question.
Try zapping the PRAM, by following these instructions:
http://support.apple.com/kb/ht1379

Firefox would open on Vista but would not connect with any website. I had to download Firefox again using IE in order for it to function. What's going on?

Using Firefox 6.0. No connectivity with any website yesterday.
The download was 5.0.1; which is now working and retains all features of the previous version including

You do not have the properties in the Bookmarks Manager (Library), but you should have it if you right-click a bookmark the Bookmarks Toolbar or in the bookmarks sidebar.
On Mac you probably do not have it if you right-click an item in the Bookmarks menu (this menu is under control of the Mac OS), but I assume that this should work if you click the "Show your bookmarks" button on the Navigation Toolbar that is next to the star to bookmark the current tab and right-click an item in the bookmarks list that opens.

I have Premiere Pro CS5. I just had to switch out my hard drive and even though nothing else changed, Premiere is not allowing me to use the GPU acceleration mode. It's grayed out. It was working fine before I switched out the hard drive. What do I do?

The specs on my computer are correct for GPU acceleration. It has been working fine but my RAID 0 drive failed and I replaced it and now Premiere no longer recgonizes it. I am assuming I need to reset something but I can't figure it out. What do I do?

You will need to reapply the cuda hack, see Ann's answer:
Re: How to activate Cuda with a quadro k2000 into premiere cs6

PDF only opens in one install of Std 7.1.0, nothing else at all

The business I work for has received a PDF from a customer, that is a version 1.3 file created using PDF-Xchange, and the PDF only opens on one computer in the whole of the business which is running Acrobat Standard 7.1.0.
On all other computers it will not open and Acrobat states that it is damaged. I've attempted to open it on other computers also running Std 7.1.0 with no success, and on my own which is running Pro 9.3.2.
How on earth is the PDF able to open on just this single computer and no others, no matter what software they are running ?.
Thanks.

Thank you both for the replies. The install had gone well up to step 29 of the process. I made sure I read the notes closely and applied everything that was needed for the install on V6R1.
Like Luis stated, I realized what was happening with the password because we did find that message in the system history log. To make a long story short, we have '/usr/sap/trans' on a separate LPAR on our 570 and needed to create the <SID> profiles on that LPAR and grant them authority to the needed transport directories. What happened though is once I did that I changed the passwords on both systems to match and didn't take into account the install process had the password we installed in the preliminary steps of the install stored somewhere. So after changing both LPAR's <sid>adm password to the install defined password, all went well.
Again thank you so very much. Much karma to both of you.
Doug

HP Deskjet F4280 - can print test page but nothing else on new Windows 7 laptop on home network

I hope you can help me. I have an HP Deskjet F4280 set up on my desktop computer running Windows Vista Home Premium 64x. I've also got a home network on a D-Link Wireless N router.
My new laptop is a Toshiba with Windows 7. I can connect to the network no problem and can add the printer (attached to my desktop via USB) and can print the test page. My problem is that I can't print any other documents. When I check the print queue all it says is "spooling" and then after a few seconds the job just disappers from the queue.
I connected the printer directly to the laptop and dowloaded the drivers for Windows 7 and it works fine. I've uninstalled and reinstalled all software on both computers. I've spent hours trying different solutions I've found on this web-site and others...and nothing works! I am very frustrated to say the least.
Is there any way you can help me???

Hi Lisamcgack,
Print sharing is a Microsoft supported application. Since the printer is working on the computers independently. Then this would be an issue between the operating systems. Check out the following Microsoft document on print sharing.
http://windows.microsoft.com/en-US/windows-vista/Share-a-printer
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

I can use my password just to open my session i can't do with it nothing else (no updates, no downloads,...)

Similar Messages

Maybe you are looking for