I CAN USE MY TRANSITIONS ON MY PROYECTS!!!!

I CAN USE MY TRANSITIONS ON MY PROYECTS!!!ONLY EFECTS OR TITLES.. PLEASE WELP ME WHAT CAN I DO !!! I HAVE THE LAST UPDATE! iMOVIE HD 6.0.3 THANKS FOR YOUR HELP FRIENDS

Hi eyecat - welcome to the forum!
I am sure that you mean you can NOT use the transitions:-)
You need to tell us what happens when you try to use them.
You should be dragging the little blue square from beside the transition you have chosen, down to the join between two clips. Is that what you are doing?
Are you storing your imovie projects on an external drive, or on the computer's internal drive?
Just a little tip - when typing your questions and replies, do not use the Caps Lock on your keyboard. On the forum, that is considered to be shouting angrilly, which I am sure you are not intending to suggest!

Similar Messages

Can't use editing transitions

I am in the process of making a slideshow in iMovie HD 6.0.3. I have inserted all of the photos and now I am trying to put the finishing touches such as transitions. However, when I try to use the 15 choices, it only allows me to use 4 (fade in, fade out, wash in, wash out). Why is this? How can I get those other transitions to use? I would like to add a little variety to the transitions since the movie is almost 15 minutes long. I need to have this finished within the next two days, so any suggestions would be greatly appreciated!!
Thanks!!

When iMovie starts acting weirdly, a common procedure is to do the following:
Close iMovie and trash the file com.apple.iMovie.plist found in User (the house icon)/Library/Preferences. (iMovie will recreate the file upon relaunch). Before relaunching, do a permissions repair using the Utilities/Disk Utility app on your Mac. Now see if you can select your transitions.
If you still can't select your transitions, try dragging the transition to your iMovie timeline.

Wanting to use multiple transitions on 1 slideshow?

I want to make a slideshow for graduation party. This will be played continuously. I want to incorporate different transitions on one. I've read that you can to do it if you use slideshow from iphoto. I can not seem to get past the files when I click on media, photo. Slideshows don't show up. This is my first attempt with wanting to use multiple transitions. I've made DVD's with chapters. Plus, I never have used it as continues play. Any help and ideas would be a welcome.
Thank you,
Lisa

In iPhoto, put your photos into an album. Then, open your album to display the photos that you put in it. Select all the photos. At the bottom of the album display window, there will be an icon called Slideshow. Click on it, and the photos that you selected will be placed into a slide show with a separate icon in the display panel. In the slideshow transition settings, select Random. That will play the available transitions at random.
If you want more flexibility than iPhoto's "Random" setting will give you, you will need to create your slide show in iMovie where you can manually insert any of iMovie's transitions. Then drag your iMovie project icon (the one with the star on it) into the window of your iDVD project.

Can't add transitions to either LT files or .mov

Hi,
I'm trying to and some transitions for a title sequence, I've created the titles in LiveType, when I either use the LiveTYpe files or rendered out files.
I can a transition into the first title but no more.
Any ideas?
iMac 20" Core Duo Mac OS X (10.4.6)

Do you have enough Media Handles to create
transitions?
Open a clip into the Viewer and see where the in/out
points are, if they are at the very start or end of
the clip there is no Media Handles available for FCE
to use for transitions.
Al
~bangs head on desk~ thanks, that's fixed it, some days I can be really thick...
I guess it's just going to be one of those days today.
I could have sworn that I'd dropped titles/video clips in and used transitions before without havign set in and out...
It's working that's what matters.
Thanks again

Using multiple transitions in slideshow

Is there a way to use multiple transitions when creating a slideshow in idvd?

Hi
I don't think so.
AND - there are one very important thing with transitions and SlideShow in iDVD. They degrade the sharpness on the full DVD SlideShow. So avoiding them results in a far better DVD.
I assemble mySlideShows in iMovie HD6 (not iM'08 or 09 or 11 - as quality severely dropps) and here I'm free
to use any transition and can time it to the audio/music much better.
From here I DO NOT use Share to iDVD - but just close iMovie HD6 and import the movie project (icon with a Star on it) into iDVD - just to prevent iMovie to render (this also degrade the end result)
Yours Bengt W

Using idvd transitions in imovie.

I would like to use the transitions that are found in idvd and add them to the choices of trasitions available to me in imovie. How do I locate those transition files being used in idvd program and move them to the imove program?
I am using ilife 4.

I doubt is possible.
But you can try and then post back here the results .
Right click the iDVD application, choose Show Package Contents, and then it's up to you to search for files that might be the transitions. Look for similar things in iMovie, and see if it works.
Be aware: back-up the two apps, so if you do something wrong you have a way back.

(1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elem

(1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elements 12. In older version the menu would stay on the screen.
(2) In pan and zoom how can start zoom on a photo in the original picture and zoom in and the next picture zoom out and the next photo pan from right to left and the next photo pan left to right.
Thanks
Sam

TidyCup
What computer operating system is your Premiere Elements 12 running on? If you have not already, be sure to update 12 to 12.1, using an opened project's Help Menu/Update.
But to the immediate questions, assuming Windows 7, 8, or 8.1 64 bit....
1. No, it is what it is. But, are you applying the same transition each time? If so, then highlight/select all the clips involved (all at one time), then Timeline Menu/Apply Default Transition will do just that for the highlighted/selected clips.
To highlight/select more than one clip at a time, hold down the Shift key of the computer main keyboard and then click on each clip that you want in the group selection
or
with your mouse cursor draw a rectangle around the clips that you want to select
2. Are you using the Premiere Elements 12/12.1 Expert workspace Pan and Zoom Tool? Or the pan or zoom presets under fx Effects/Presets/? With those you can do pan or zoom, not pan and zoom.
Or, are you in the Elements Organizer 12 Slideshow Editor using the pan and zoom effect there? Or, are you using keyframing the Motion Scale property for zoom and the Motion Position property for pan?
Are you asking about photos with landscape or portrait orientation?
The pan and zoom tool does one photo at a time.
Have you read the Adobe documentation on the Pan and Zoom Tool?
http://help.adobe.com/en_US/premiereelements/using/WSeffff8bffc802084-494411db12fd35452dd- 8000.html
Please review and clarify and then we can get into greater details on this.
Thanks.
ATR

Can't add transitions, titles

Hi,
I have iMovie 4 and I am trying to add transitions and titles to color clips that I have placed in my imovie. I know you are supposed to be able to "drag" titles on to the clip that you want, but there is nothing for me to drag. I am at a loss. I can't add transitions either. Please help! My first experience using iMovie has been completely awful. I thought this was supposed to be user-friendly...

You are supposed to drag the name of the title/transition from the list.
http://www.danslagle.com/mac/iMovie/usage/5017.shtml

Can't add Transitions b/w LiveType clips in FCE

I'm making small promo movie in FCE, with a lot of LiveType clips interspersed with some movie clips (Apple Interm. Codec--but I've also tried using DV-NTSC). My problem: when I've strung together several LT clips (.ipr--but also .mov after rendering) I can't add transitions b/w them in FCE (and can't add trans. b/w a LT and movie clip). I get msg: "insufficient content for edit."
I don't understand well the whole codec process. I've read here that the properties need to be the same b/w LT and FCE, but I'm not sure exactly how to do that. The property options in both programs have slightly different presets and I've tried to match the codec & aspect ratios etc. as best I can. Since I don't know what I'm doing in this area, I've tried to match things up as best as possible, yet no luck.
BUT, even when I've opened a brand new project in FCE, brought in several .ipr clips (w/out bringing in any movie clips), I still can't add transitions b/w .ipr clips (or LT .mov files).
Help! What am I doing wrong?
Thanks

OKay, but how do i do it..
I have 2 movies...I want a transition of 2 seconds..do i Mark in from the point of the first movie where i want to have the transition to start ? And out in the 2nd movie where i want it to finished (maximum) ?
Or do i mark out on the first movie and mark in on the 2nd movie ?
The whole day i am trying things but nothing works for me.
I even did see a video tut that says it's because the videos are not NTSC...But they are HD so that wouldn make a problem ? Or does it ?
Sorry for these simple questions but there is no tut in my language and i can't find a forum that explains it in dutch..
Thanks in advance

Can't Add Transitions/All Clips Stacked in one Box in Sceneline

Help-
I'm a total newbie with Premier Elements 7, but I'm about ready to throw a brick through my monitor.
I'm in Sceneline, and when I drag clips, they all get stacked on top of one another in the left box. I can't add transitions (I can find them, but when i drag them onto the transition arrows nothing happens).
What is the trick to dragging clips into new entries on the Sceneline?
Thanks in advance!
Dean

The audio format (stereo or 5.1 surround sound) of your video does not match the audio format of the project preset you selected. In Timeline mode the first three tracks are reserved for the audio format determined by the project preset. If you use another audio format it will be placed on track 4. When this happens you can not see the clips in Sceneline mode... they are stacked as you are seeing.
Solution is to either use Timeline mode or if you wish to use Sceneline mode you have to use the correct project preset. HOWEVER... PE7 only supports 5.1 audio in AVCHD high definition projects... so if you have standard definition with 5.1 audio you have no choice other than to use Timeline mode. If you want to do any serious editing you will really need to use this mode anyway.

Two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account?

I have two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account
Or is it possible to transfer the purchases (apps) to my new .me account so that I can re-download them in the future without having to switch accounts?

crazyshark wrote:
I have two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account
Or is it possible to transfer the purchases (apps) to my new .me account so that I can re-download them in the future without having to switch accounts?
You can't do this, and you can't transfer purchases between accounts. There is no conflict about using one ID for iTunes, iTunes in the Cloud and iTunes Match (the ID you've been using for iTunes) and using the other ID for iCloud.

HT202667 Hi - My daughter was using her Apple TV until recently when she got a Smart TV. Now the Apple TV is not needed so she passed it on to me. How do I get it transferred over from her Home Sharing account to mine so that I can use it with my PC?

Hi - My daughter was using her Apple TV until recently when she got a Smart TV. Now the Apple TV is not needed so she passed it on to me. How do I get her Home Sharing account transferred over to mine so that I can use it with my PC? Thanks!

As Winston Churchill wrote, however you might want to do a factory reset on the Apple TV.
This way all information pertaining to your daughter will be removed from the device. Specifically if see was sign into any of the streaming service, Netflix, Hulu, etc. her credentials will still be associated with this Apple TV, doing a factory reset will remove all that and make it as if you purchased the device and just plugged it in.
regards

How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both.

how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both. From systems Preferences I must select one or the other. I want both to work all the time.

Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer

I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog. Is there any way I can use the apple tv on analog cables?

I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog. Is there any way I can use the apple tv on analog cables?

Welcome to the Apple Community.
It's do-able, but I don't think it's a great idea.
DVI
Some users with DVI have managed to get their TV's to work with DVI-HDMI cables. DVI carries no audio, so alternative connections need to be explored to enable audio. DVI doesn't necessarily support HDCP as well as other standards used by HDMI (which may or may not be an issue)
Analogue
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (Apple TV 2), 720p/1080p (Apple TV 3)
DAC
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

Using iPad mail program I have a draft of an email. I attempted to "cancel" and "delete draft" but it is still on my screen even after shutting down and restarting. How do I exit so that I can use other mail functions?

Using iPad mail program I have a draft of an email. I have attempted to "cancel" this and "delete draft" but the email stays on my screen. How can I exit this so that I can use other email functions?

Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I CAN USE MY TRANSITIONS ON MY PROYECTS!!!!

Similar Messages

Maybe you are looking for