I can used the application

Hi, my problem is I can download the application, Irecived this messege "Unable to purchase. Please try again later." please help me!!

Do as it says and try again later

Similar Messages

Creative Cloud membership (one-year) .. I Can use the application on my Computer and Laptop

Creative Cloud membership (one-year) .. I Can use the application on my Computer and Laptop

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each
-Both computer Cloud subscriptions may not be in use at the same time

How I can do to display the comments of the cells in an Excel spreadsheet? I have an iPhone (4S) and use the application Numbers

how I can do to display the comments of the cells in an Excel spreadsheet? I have an iPhone (4S) and use the application Numbers

I would write a LabVIEW VI to read the Excel file(s) on computer n°1 and publish the data in a shared variable over the network.
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

Logic Pro 9 (9.0.0). Message You can't use this version of the application Logic Pro 9 with this version of Mac OS X You have Logic Pro 9 9.0.0. I have been told that I can use the Logic Pro 9.1.4 Update (.dmg) which you can download from Apple Logic

Since upgrading to lion, I can't use Logic pro, hope someone can help. thank you
Logic Pro 9 (9.0.0).
Message
You can't use this version of the application Logic Pro 9 with this version of Mac OS X
You have Logic Pro 9 9.0.0.
I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

Since upgrading to lion, I can't use Logic pro, hope someone can help. thank you
Logic Pro 9 (9.0.0).
Message
You can't use this version of the application Logic Pro 9 with this version of Mac OS X
You have Logic Pro 9 9.0.0.
I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

I made the purchase association for more than a week, but even having already received confirmation of payment and the invoice , I can not use the application . I am being told I do not have no purchase on my name

I made the purchase association for more than a week, but even having already received confirmation of payment and the invoice , I can not use the application . I am being told I do not have no purchase on my name. What i must to do ?

Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page

Report Generation for Excel does not work after using the Application Builder

I have a VI that writes data to an Excel file using the Report Generation Toolkit. I recently compiled the VI into a single Application (EXE) using the Application Builder. My VI runs its tests properly, but no data is written to Excel. What could be the cause? I don't receive any error messages.

Hi
I usually build exe-files, which sometimes also have report functionality.
Open the Application Builder and check the following things:
1. Add the following vis: _Word Dynamic VIs.vi, _Excel Dynamic VIs.vi They should be located in the directory ..\LabVIEW X.X\vi.lib\addons\_office in the llbs _wordsub.llb and _exclsub.llb (report1.jpg)
2. If you use an Installer, go to the Advanced Settings. There you can select some things to include in the Installer. Check if "NI Reports Support" is selected. (report2.jpg)
These are the things I always do, if I need reports and I never had problems up to now. I made two screen-shots of these settings.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
report.zip ‏25 KB

HT203421 i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this

i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this problem.

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

HT5621 I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully und

I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

After installing an application that was created using the Application Builder

After installing an application that I created using the Application Builder I get this error if I try to run " ANY " LabVIEW App's that I have built. "Executable Version 7.1.1 doesn't match Resource File 7.1. Check your configuration."
The way that I tried to fix this is to reload LabVIEW 7.1 and DAQmx 8.0. I am using two NI-6528 switch cards.
After I reload LabVIEW and DAQmx I can run my applications but as soon as I install one on this development machine the error begins again.
The executable that I built works fine on the development machine and any other machine that I try it on but it appears that the Run-Time engine 7.1 becomes corrupt after I run setup.exe for the newly created application.
I have built numerous Installers, setup.exe's in the past without this error. Just this latest one caused this problem to start.
I can NOT upgrade to 7.1.1. I am doing work for many different sections of this factory and I can not force them to upgrade. I've asked. Others supply code for the same machines using LabVIEW 7.1.
I am stuck creating executables and manualing moving the correct files to the target machines.
What can be done?

No. The KB article was talking about a machine with 7.1.1 installed. I have LabVIEW 7.1 installed.
The machine that I am having trouble with is my development machine. LabVIEW 7.1, DAQmx 8.0.
If I build the executable all is fine. I can still run old executables including the one I just built.
If I create the installer all is fine. I can still run old executables including the one I just built.
When I install the app on my development machine the corruption occurs. I can " NOT " run old executables including the one I just built. The subject error pops up.
I have not moved any executables to the other machines yet. I don't want to corrupt others.

I have Lightroom 6 (not CC) on a Windows machine. I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into m

I have Lightroom 6 (not CC) on a Windows machine. I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into my Adobe account...AGAIN! And then to further add insult to injury, I'm prompted to enter in the license number of my product. I've gone through this process a dozen times now...SCREAM!!!

Paulou12 what type of a Creative Cloud Membership do you have? You can find details on how to update Lightroom using the Creative Cloud Desktop application at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
Finally if you are in a managed environment then please work with your I.T. department to apply the update.

Can use the same thread safe variable in the different processes?

Hello,
Can use the same thread safe variable in the different processes? my application has a log file used to record some event, the log file will be accessed by the different process, is there any synchronous method to access the log file with CVI ?
David

Limiting concurrent access to shared resources can be better obtained by using locks: once created, the lock can be get by one requester at a time by calling CmtGetLock, the other being blocked in the same call until the lock is free. If you do not want to lock a process you can use CmtTryToGtLock instead.
Don't forget to discard locks when you have finished using them or at program end.
Alternatively you can PostDeferredCall a unique function (executed in the main thread) to write the log passing the apprpriate data to it.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

What do I have to do to bring iPhoto up so that I can use the program?

This morning we received a software update for iPhoto (36MB) immediately after this download and installation we received a second software update for iPhoto (57.7MB). Shortly after finishing the second update I tried to open iPhoto to work on a slideshow of holiday activities.
I went to:
Dock > iPhoto
Message: " The photo library needs to be upgraded to work with this version of iPhoto."
upgrade ( I clicked on the upgrade button)
"Loading photos... " " Examining Photo Library "
Everything stopped.
New screen: " There is a problem accessing one or more files in your iPhoto Library folder. >Finder, >iPhoto Library, >get info., ... check read/write permissions."
I proceeded as directed. Permissions were all read/write for the iPhoto Library folder.
I went back to iPhoto... repeat of problem.
What do I have to do to bring iPhoto up so that I can use the program.

Welcome to the Apple Discussions. What was updated and did you repair disk permissions after it was completed?
As a first fix attempt download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administartive name in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How best we can use the Rollback and RollbackAlways mechanism in Visual Studio Release Management Template

Hello All,
We need a clarification on Rollback and RollbackAlways in Release template.
We checked a scenario for Rollback and RollbackAlways:
In Release Template, we have the first activity as “Configure Application Pool” and then followed by a rollback action of “Create Application Pool”
and “Create Web Site” then followed by "Code Deployment" via TFS build.
We tested with 2 scenario’s:
With App Pool and Web Site already existing: when triggered the build, configure
app pool succeeded, then Rollback action was skipped (as previous action was successful), finally deploy the code executed (code deployed) and build got succeeded.
Deleted App Pool and Web Site: when triggered the build, configure app pool failed (as no app pool existed), Rollback action executed (as previous action failed) – created app pool and web site then finally
deploy the code executed (code deployed)
But build failed (Error: Configure app pool action failed).
Ideally the build should succeed as the roll back action got executed and code deployed successfully.
Please correct us if our understanding is wrong.
Also, Kindly let us know how best we can use the Rollback and RollbackAlways mechanism in Release Management
Looking forward for your positive response.
Thanks in advance.
Regards,

Hi Shashank,
Rollback Always runs if any of the actions in the template failed. Rollback will run if action just above rollback fails or if any of the actions below the Rollback fails.
Article here (http://www.incyclesoftware.com/2014/03/understanding-rollbacks-release-management/) clearly explains how Rollback and Rollback
Always work.
I think you come across this issue since you are using build to do the "code deployment" action. You should use the release template to do that.
As far as I know you cannot use Rollback to achieve condition check (App pool exist in your case) action.
For this you can create your own Power Shell component (which checks if the app pool exist and is not create it) and add it as a tool in RM server (RM Server Inventory).
Another option is you can follow the workaround in below thread "Answer" quoted below. That is execute Remove app pool regardless if it exist or not (which does not fail) and then create app pool.
I was able to get it working by removing the app pool which does not fail if it doesn't exist. Removing then creating seems the long way around but it works.
Flow:
Remove Application Pool
Create Application Pool
https://social.msdn.microsoft.com/Forums/en-US/43bf21c8-e233-4e58-a5a8-2592b78bc466/vs-2013-release-management-create-application-pool-fails-if-it-already-exists?forum=tfsbuild
Cheers!
Chaminda

I have a macbook white (Snow leopard), just started using mac, Is there anyway we can use the Iphone Apps( downloaded from ITune) on Mac

I have a macbook white (Snow leopard), just started using mac, Is there anyway we can use the Iphone Apps( downloaded from ITune) on Mac, they are getting saved in Mobile applications and have ipa extension

The operating systems for iOS devices and for Macs are completely different. Applications written for iOS won't run on a Mac no matter what fiddles you try with it. You can sometime extract data by opening the package, but it still won't do you any good. Look in the Mac App Store in your Applications folder to see if there are Mac versions or similar programs (iTunes login required).

"...cannot use the application "Address Book.app" with 'leopard.'...????

I get the message: "You cannot use the application “Address Book.app” with this version of Mac OS X. "What does this mean, wat do I do? Do I lose my address book.?

you can do the following to transfer your Tiger addressbookdata file to Leopard if none of your other countermeasures are working.
Create a new folder and give it a name such as TigertoLeopard data or whatever;
then drag your Tiger addressbook data file into that folder;
add .abbu to the end of the name you gave that new folder;
remember where you placed the folder and use Leopard Mail import command.

I can used the application

Similar Messages

Maybe you are looking for