I can VPN into my work but can't connect to any devices inside that network
I authenticate fine and get an address but I cant connect to any devices inside my work. I am connecting to Cisco Lan controllers, routers, and switches.
I thought it was a routing problem but I can connect with my iphone and open the webpage for my lan controllers and I even tested it on a pc laptop with Windows XP and it works fine. I have a 2012 Macbook pro. I prefer to use my Macbook all the time. I haven't used my Windows laptop until today since I got the Mac. Do you think I have the V-Word?
Please read this whole message before doing anything. This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it. The purpose of this test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.
Similar Messages
-
I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest. (Network settings, ISP, Internet and server.)
Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Can I connect a wired device to access network?
I have an Airport Express set up as "Join a Wireless network" Can I connect a wired device to the ethernet port of my AE so that it can access the network?
The Ethernet port is normally enabled in the "Join" mode, if you have one of the newer 802.11n models of the AirPort Express.
If you have an older "b/g" version of the Express, the Ethernet port is not enabled in the "join" mode. Check the model number on the side of the Express. If you see A1084 or A1088, this is an older version of the Express.
Test your current Express to see if the port is already enabled by temporarily turning off the wireless on a laptop and connecting the laptop to the Express using an Ethernet cable. See if you can get an Internet connection. If you can, you know the Ethernet port is working. -
hi, i am in a wifi (macbook pro) works fine but ipad2 and iphone doesnot work but shows as connected into wifi (wifi defenetley works) ? anybody can help
Make a Genius Appointment at the Apple Store, take your laptop in and get them to help you upgrade it.
-
I dropped my iphone 4s in water and everything works but the backlight. I have heard rumors that I can take my damaged iPhone into an apple store and trade it in for a new phone and pay the difference. Is this true?
Apple offers an out of warranty or not covered under the warranty "repair" price, which pays for an exchange at a discounted price off the full retail sales price.
-
I have Comcast Internet and have it connected to a Motorla Surfboard modem and have that running directly to a 2TB Time Capsule. The TC is serving as our time machine as well as our wireless router. We lost power in a storm a week ago and can no longer connect to my wireless network I can see the network and sign into it via password, but cannot connect with any device(iMac, MacBook, iPhones, iPod touches, air tv, etc.). ALL of these devices worked gat before the power went out. I reset both modem and TC and still can't connect. I can connect to the Internet through Ethernet cord directly from the modems dn have confirmation(per Comcast service) that the Internet is working and we have a good connection.
The TC is less than six months old so I'm not sure what is wrong. I have reset settings with TC to no avail. I have reset the TC SEVERAL times and have no idea what could be wrong and what is prohibiting me from connecting. Anyone that has ANY suggestions or ideas as to how to fix this, PLEASE HELP!!! I'm going crazy using iPad 3G and not being able to connect to our wifi. THANKS FOR YOUR TIME AND I LOOK FORWARD TO GETTING BACK TO THE 21ST CENTURY!Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.
-
My iPhone shut down and factory reset itself for no reason, and now when I plug it into my computer or any power source, the apple shines but it doesn't get any further than that. How can I fix it?
Try Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work. -
please can someone help me out. I initial configure my bluetooth stereo ear piece with my iphone 4 and it was working but I mistakenly forget the bluetooth device and I cannot reconfigure it again with my iphone 4?
place the device in pairing mode and re-pair.
If you don't know how to do this, go to the manufacturer's website and download the user guide for your device. -
Every time I open a new illustrator file it says "print.ai" file unknown. I can open previous work but no new files. Any fixes?
All nee AI files are based on document profiles, which are actually plain AI files.
Print.ai is one of them. You may try and select a different profile to see if it's just the Print.ai
But it may of course be all of them that somehow got corrupt.
Could be that the files are corrupt or that Illustrator doesn't have access privileges.
The files are located in your user folder. Find the exact location in this article:
http://blogs.adobe.com/adobeillustrator/2009/05/startup_profiles_a_great_tool.html
In case the files are completely corrupt you may try and rebuild the preferences or even do a complete reinstall. -
Our airport extreme network works fine with our 6 devices. But when someone comes over and tries to log on, they can't until we restart the airport. Then they can get on, but it knocks one of our devices off the network. Any ideas?
I have not done a factory reset, I was trying to find out if I had some setting configured wrong first. I figured I'd just make things worse if went through a reset!
Here is a couple of screen shots: -
I can't load pictures to online site... IPhoto works but not aperture3. I have edited photos that I exported to an external drive but they will still not load to Walgreens for printing. Does anyone know what I can do?
Are you shooting RAW? Are you exporting masters or versions? Is there a size limitation on the Walgreens site?
-
After I upgraded to IOS 8 my iPhone is not working well at all .. the most serious issue is the wifi which is too slow and can't connect to apple store and can't update my application .. also tried to search or update for ios 8 but also can't connect . safari also always can't connect to any the server . please check and advise
Hey ahmedfromtanta,
Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Wi-Fi networks and connections
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
How can i connect a usb device (keyboard) into ipad 4
How can i connect a usb device (keyboard) into ipad 4
The only keyboards that will work are bluetooth ones and keyboards made specifically for iPad.
-
I Just bought a IPAD2 and I can connect to my home wifi but I can't connect to any free hotspots. My Ipad shows the connections but I can't get any web pages. what do I do?
Many free wi-fi hotspots require that you register first - agreeing to their terms and conditions, etc. This is usually provided via a web page with Safari provided immediately after connecting. If the register page is provided via Flash, you won't see it and you won't be able to register.
-
I am trying to airprint from an iPad , but get, " no AirPrint printers found" , how can I connect the two devices?(I have followed all the usual network steps!
Make sure you have a AirPrint enabled printer.
http://support.apple.com/kb/ht4356
Maybe you are looking for
-
BUS2105 Issue on creation of PR
1) We have 4 levels of approvers, after 2 levels are approved , then the status is 'IN Release' , Also when we cancelled a PR its status is 'IN Release' , 2)We want to take different actions on 'Pr Cancelled' & 'PR IN Release' , How can we differenca
-
Aperture 2.1.1 upgrade problem
I upgraded to 2.1.1 and cannot access Aperture anymore. I get the first screen and then it freezes. It does not open and the only way to close is Force Quit. I have a genuine serial number (bought the software at Apple) and reinstalled the upgrade fr
-
CAN SOMEONE PLZ TELL ME HOW TO SHUT OFF THE LIGHT FROM FLASHING WHEN I RECIEVE A CALL?
CAN SOMEONE PLZ TELL ME HOW TO SHUT OFF THE LIGHT FROM FLASHING WHEN I RECIEVE A CALL?
-
StreamCorruptedException problem
I am trying to append serialized objects to a file without doing it all at once, ie, writing some objects to the file (for example three objects), ending the application, closing the object input stream and file storing the serialized objects. Late I
-
Hi, I am using a Tababr in my application and I need to specify a particular style for the tabs when a tab is selected. Any Ideas? Cant find anything in the docs that allows you to do this. Right now it just turns the background to white. I would lik