I cann't install drivers for wifi and usb2 on inspiron 3721.
Hi.
I cann't install drivers for wifi and usb2 on inspiron 3721.
My OS is windows 8.1
ID for usb2:
USB\VID_0BDA&PID_0129&REV_3960
USB\VID_0BDA&PID_0129
ID for wifi:
PCI\VEN_168C&DEV_0036&SUBSYS_020C1028&REV_01
PCI\VEN_168C&DEV_0036&SUBSYS_020C1028
PCI\VEN_168C&DEV_0036&CC_028000
PCI\VEN_168C&DEV_0036&CC_0280
Please, help me!
Install the Intel Chipset Drivers if you haven't done so already:
https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-
http://downloads.dell.com/FOLDER01739853M/1/Chipset_Driver_498GM_WN_9.5.14.1724_A01.EXE
http://downloads.dell.com/FOLDER01744340M/2/AHCI_Intel_W8.14_X00_A01_Setup-9V0D2_ZPE.exe
That's the Realtek Card Reader:
http://downloads.dell.com/FOLDER01692810M/1/Chipset_Driver_7HRCT_WN_6.2.9200.39050_A00.EXE
That's an Atheros Dell Wireless 1705 Wireless Card use this driver:
http://downloads.dell.com/FOLDER02227589M/1/3340_Network_Driver_XVXC6_WN_10.0.0.320_A00.EXE
Also install...
Aeroplane Switch Driver:
http://downloads.dell.com/FOLDER01646912M/260/AirplaneMode_W81_x64_1.4.1_ZPE.exe
Touchpad:
http://downloads.dell.com/FOLDER01918135M/1/Input_Driver_JCY9W_WN_18.0.1_A08.EXE
Audio:
http://downloads.dell.com/FOLDER01706440M/1/Audio_Driver_8F9KD_WN_6.0.1.7023_A00.EXE
Video:
http://downloads.dell.com/FOLDER01815953M/1/Video_Driver_W1PPW_WN_10.18.10.3316_A02.EXE
http://downloads.dell.com/FOLDER01726226M/1/Video_Driver_3JMFD_WN_13.151.0.0_A00.EXE
Dell Quickset:
http://downloads.dell.com/FOLDER01861763M/1/Application_7JTWX_WN_10.16.004_A01.EXE
You may also update the BIOS to A12:
http://downloads.dell.com/FOLDER01818934M/1/3721A12.exe
Similar Messages
-
How to install drivers for importing and burning CDs
When I open my iTunes program, I receive a notice that: the drivers for importing and burning CDs and DVDs are missing. I have attempted to re-install the iTunes program, but to no avail.
See iTunes for Windows: "Registry settings" warning when opening iTunes and/or iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
tt2 -
HT1926 need to install drivers for cd and dvd burning
the registry settings used by itunes drivers for importing and burning cd and dvd are missing because of other burning sofeware
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
When I attempt to log on to I tunes I get the following message:
"The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
This can happen as a result of installing other CD burning software. Please re-install I Tunes."
To my knowledge no new software has been installed. I have tried un-installing and re-installing I Tunes but I still
get the same message.
Can anyone offer any suggestions? Do I need to download a new driver?
Bill MartinI can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
If so, here's the relevant instructions for that step:
On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu. -
when i start up i tunes i get the message,"The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i Tunes." I tried reinstalling and still get the same message. when I ran the i Tunes diagnostics is says that the high and low filters are missing.
when i was having trouble with my optical drive(before Dell sent me a new one) the dell tech support representative had me delete some reg. files to try to fix the problem. I was told this would not affect the new drive when i install it or any of my existing programs. here is what he had me do....
Agent (CLKsmb_RyanJose_224427): "Click on Start
Click on Run
Type in REGEDIT
Click on OK
Click on the plus sign next to HKEY_LOCAL_MACHINE
Click on the plus sign next to SYSTEM
Click on the plus sign next to CurrentControlSet
Click on the plus sign next to Control"
Click on the plus sign next to Class
Click on the plus sign next to {4D36E965-E325-11CE-BFC1-08002BE10318}
On the right pane, click to highlight Upperfilters
Right click on Upperfilters
Click on Delete
Click on OK
On the right pane, click t
o highlight Lowerfilters
Right click on Lowerfilters
Click on Delete
Click on OK
Right click on Silent Install
Click on Delete
Click on OK
Close the Registry Editor
Reboot the computer
how can i get this message box to stop poping up every time i open i tunes? otherwise i tunes works fine. it still rips cd's. I just keep getting this message even after reinstalling i tines.
thanks,
chrisRefer to this article to fix:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299 -
Everytime I connect my iPod Touch (4th Gen) to my laptop, running Win 7 (64 bit) I get the message "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes" I have reinstalled iTunes several times and it has not fixed the issue. I am running ver 10.2.2.12 of iTunes. I HAVE NOT installed any other burning software to my laptop either. I haven't tried uninstalling iTunes and then re-installing it yet. Would that perhaps fix the problem? I've read that many users have had issues with the new version of the software and I was wondering if that might be causing my issue. I'd like to point out that iTunes seems to work after getting rid of the message, but I haven't tried to burn any CDs or put music from a CD to my laptop. Any ideas on how to get rid of the annoying message?
I also am having trouble hooking up with our other computers using Homegroup. I noticed quite a lot of people are having the same issue and hopefully they come up with a fix for that soon.
Thanks in advance.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters -
When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility. Any tips on removing this error message for good?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
When I click on itunes, I get a message that says, "the registry settings used by the itune drivers for importing and burning cds and dvds are missing. this can result from installing other cd burning software. Reinstall itunes." I am a really inexperienced computer user. My computer is a windows 7. Would someone please walk me through this or tell me where to find information on how to do this. Thanking in advance, Laurie
Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems? -
How to install drivers for ati radeon 3200?and how to config xorg.co ?
how to install drivers for ati radeon 3200?and how to config xorg.conf?
mawch wrote:how to install drivers for ati radeon 3200?and how to config xorg.conf?
Hello
I am using ati hd 3200 which is integrated with my motherboard. If you are using arch you can download & install through pacman. The package is named like catalyst*. You can install them by issuing as root user
#pacman -Sy
#pacman -S -l | grep -i catalyst
#pacman -S catalyst catalyst-utils
After installation reboot your machine in runlevel 1. (single mode). Ensure "fglrx" module is loaded correctly using
#lsmod | grep -i fglrx
If the resultant output have "fglrx" part the module is loaded correctly. The next step is to create a working /etc/X11/xorg.conf. Backup your current xorg.conf if needed.
#cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bkup
Then issue
#aticonfig --initial --input=/etc/X11/xorg.conf
This will create a new xorg.conf file. Now we can test our confign.
#telinit 3
I am using runlevel 3 to avoid graphic messup!!
issue
#gdm
If you graphical login screen works correctly there is nothing to do more except adjust your monitor resoloution as you like.
To know your ati driver is working correctly issue as root
#fgl_glxgears
If gears are rolling happily it seems correct. You can also know more about installed ati driver
#fglrxinfo
Now the installed driver version is in the output
If there is any problem try following
##### Soloutions to solve various display problems using ATI Catalyst Drivers in Linux #####
yes video playback is choppy until i ran :-
sudo aticonfig --overlay-type=Xv
Try adding the following to the 'Device' section in /etc/X11/xorg.conf
Option "TexturedVideo" "true"
### This is a half solution for mythtv problems. Run mythtv in window (no full screen) If You have a screen resolution of 1024x768 try the command;
mythfrontend --geometry 800x600
Append the "Device" Section of /etc/X11/xorg.conf file as follows;
Section "Device"
Identifier "Videocard0"
Driver "fglrx"
Option "OpenGLOverlay" "off"
Option "VideoOverlay" "on"
Option "TexturedVideo" "on"
Option "TexturedVideoSync" "on"
Option "Capabilities" "0x00000800"
BusID "PCI:1:0:0"
EndSection
Add following in the .bashrc of each user or /etc/bashrc file* Most Effective In My Case!!
export LIBGL_ALWAYS_INDIRECT=true
####### Arch Linux - Add the "nopat" option to the /boot/grub/menu.lst or /boot/grub/grub.conf
####### as in the following example
title Archlinux Ice Kernel
root (hd0,1)
kernel /boot/vmlinuz26-ice root=/dev/sda2 ro resume=/dev/sda3 quiet splash nopat
initrd /boot/kernel26-ice.img
NB: REGULAR DISCLAIMER IS ALSO APPLICABLE TO THE ABOVE MATTER; USE IT AT YOUR OWN RISK !!! ALL THE ABOVE INFORMATION IS COLLECTED FROM VARIOUS POSTINGS IN THE FORUM AND FROM MY OWN EXPERIENCE
Wish U good luck
mvdvarrier -
I received the message 'The registry settings used by the iTunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result on installing other CD burning software. Please reinstall iTunes.' I have re-installed iTunes and still receive this message. Any suggestions?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Note I am receiving when opening up iTunes: The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
Question: Do I have to uninstall iTunes and then reinstall? I am a little hesitant to do this!
NoelynHi for the message error "Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
Here are the resolutions I found and it fix the problem for me.
Resolution
iTunes installs a device filter which helps it work with your optical drive. If this device filter is missing, you will see the message mentioned above. To resolve this issue, reinstall iTunes to put the device filter back in place. To reinstall iTunes, follow the steps in the article below appropriate to your OS:
HERE http://support.apple.com/kb/HT1923
If you still get the pop up error "Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
Do this
http://support.apple.com/kb/TS3299
Good luck!
B -
When connecting to Itunes, it shows the following error: registry settings used by itunes drivers for importing and burning cds are missing.
I have edited the registery, downloaded the Gear drivers, uninstalled and installed itunes, and the error still appears.
What else can I do. Cannot connect any of our iphones or ipods to itunes because of this error.I have edited the registery,
We'd better have a closer look at the keys to see what's going on.
Can you post a screenshot of the contents of the key you've been editing, please? Include all of the regedit screen, including the left-hand column. Save the screenshot to an image file, and insert the image file in a reply by clicking the wee camera icon at the top of the reply window. -
Lenovo g570 network adaptor not found (for wifi and blue tooth)
my lenovo g570 laptop does not found network adaptor for wifi and blue tooth it did not recognize the hardware part may be. because i install software for that so may time. few days back i used wifi as well as bluetooth in my lapi but for last two or three month i just used lan for internet connection and in between i chanded my os wihich is win 7 ultimate to win 7 proff. i dont know what is the reason for that.
please troubleshoot this so that my lapi can detact network adaptors for wifi and blue thooth.
vivek
Solved!
Go to Solution.hi VIVKGP,
Thanks for Posting!
Please check under Control Panel and uninstall Lenovo energy Management and uninstall it,
Now Download and install this, now Download and Install this.
Lenovo Energy Management -WIndows 7
caez29ww.exe
13.6MB
Restart after Installation
After Installation:
Press Fn+F5 and make sure Wifi and bluetooth are on "ON" status.
You can also Try installing Drivers for both.
Broadcom Bluetooth Driver
IN3BTH50WW5.exe
58.8 MB
Intel Wireless WiFi Link Driver
IN1WLN101WW5.exe
138 MB
and check the status again.
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???
If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.
-
Windows Vista Drivers for 1820 and 1616 - Lets have some drivers ple
RePost from http://www.productionforums.com/view...?p=47643#47643<img alt="" src="http://www.productionforums.com/images/icons/icon8.gif[/img]?Lets have some drivers please
<span class="postdetails">Windows Vista Drivers for 820 and 66
I hate to say this about E-MU but the way they are dealing with Vista Drivers is unprofessional. I am a repeat customer of Creative products and was so impressed by my old Platinum eX that I bought a second to run duals for tons of audio processing. That was back in the day. Then I jumpped ship and tried out an M-Audio Firewire 40. That did not last too long beforei was completely unimpressed. So I came back to Creative... Purchased a 820 in the box. So impressed I turned around and purchased a 66 in the box just 8 months later. Both ran smooth as butter... All until i just recently built my new system designed primarily with audio production in mind.
With a setup like this, who needs a mac?
AMD Athlon X2 x64 Dual Core +6000 3.0 Ghz
2 Gigs Corsair
Samsung SyncMaster 206BW 2" Wide Screen
EVGA NVidia 9700s 256 DDR3 Graphics
SATAs up the yin
and a PCIMIA to PCI Dock
All under Vista Ultimate OEM
And Guess what?
Months into RTM of Vista...
E-MU is caught pushing release dates.
Last month it said they would release beta drivers middle of April...
I waited, patiently I might add.
I waited<waited some more, I try running xp drivers... computer wont even try to install them properly.
My software waits, computer waits, turns into a gameing machine just because my all together 600 dollar investments in Creative are not important enough to leld me the drivers i need to be producti've in what i love.
I need x64 drivers stat. I need them working, I need them installable without a glitch, a hitch, no driver signing problems, no questions, no fuss no muss. I find it ironic that you guys at E-MU are willing to jump right in there and make sure to have drivers compatable for you new products, yet faithful advocats of the most powerful soundcards you have are sitting here dead in the water because you dont find it nessesary to place priority on ready and waiting end users who have purchased long term support buy investing large amounts of moola into hardware from your company.
Come on, its not like the 820 or the 66 are exactly legacy technology. We are talking about Hardware that is only two years old and should be usable for up to 6 years. This is deffinatly a strike against the company and just goes to show where Creative stands.
I have stood by waiting in silence for a very long time.
Now i think my time has come to tell how i feel and i believe there are alot of others out there that feel the same. the only items that do not work soothly are my E-MUs... go figure.
And I have been looking forward to all i can do running both of them side by side.
Oh yes, and that link posted above to the beta news for vista... its a joke. open up your betas, and have a real dev tell us what the hang ups are... At least give us real concreate reasons why it is taking so long.
with that said, when you guys get yoru act together and get me some drivers, I will sit happy as a lark.
My thoughts for today.
~Alpha-Beta ReaKKtorHello Silas,
sorry for my bad english
I already checked that page. On the first time I was trying to install Vista on a clean hard drive. The installation process finishes without errors but after installation Vista shows me a lot of error messages, mostly about unknown hardware. So I installed all available drivers I have found on Toshiba web site. It not helped me too much, hardware problems still remains. I could not find out what exactly causes probles. Finally I decide to install XP and then upgrade to Vista. Now everything seems to be ok. :D
There was some hardware problems but much easier to resolve. It seems to me that Toshiba did not provide all the drivers, for example StarForce Protection drivers. Vista did not recognized this hardware on the first time.
Now it works!
Maybe you are looking for
-
Hi, I need to print both the cleared and uncleared items at the footer of the smartform. For this I need to pick dmbtr and zterm fields from BSID and BSAD tables.How can I print the cleared and uncleared items by picking the data from both these tabl
-
Email accounts won't sync between iPhone and iPad
I can't figure out why email account syncing between my iPhone and iPad stopped? For instance, if I delete a message in one of my email accounts on my iPhone it doesn't delete it on my iPad? Any help or suggestions is much appreciated!
-
Force flash to open file download box in front of the flash movie
Folks, I'm making a dvd title using flash to auto start when people pops the dvd disc in. I have a button 'Click here to download the movie' and clicking the button should pop up a file download box so people can save the movie file(.mov) to their de
-
I can't open my pdf files with adobe reader because I get a message that saysThere was a RAISE with
i can't open my pdf files because i get a message that saysThere was a RAISE without a handler. The application will now exit.
-
Yahoo messenger is not logging in
I am not able to log in YM in my Mac Pro - (new OS)as I do it in my Windows OS in my other laptop . Every time it says - the user id adn password is not correct , where as same is opned else where in different computer including in my smart phone . I