I cannot access "bridge" on my newly installed Photoshop CC.

Need to access "bridge".
Also unable to allow updates as says I need administrator password.

Bridge CC is now a separate download and it's installed from the CC Desktop app.
If you are an Administrator on your PC, just use the same password you use to log in to your PC in order to install updates.

Similar Messages

I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. going again?

I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. up and going again?

Niel...
I installed Leopard 10.5.6 and then it upgraded to 10.5.8, when I installed it I had the old info saved to a "previous systems" folder, where most of my artwork, etc. were saved, I have a one terabyte Lacie backup that unfortunately did not work as it was intended...it saved the new info and not the old. I did look into the system preferences folder and found the classic file, of course it wouldn't launch...but I have the old G 5 startup discs and will try to do it as you stated. I will try also to move it out of the previous folders file to my hard drive and see how that works.
thank you for your time and help,
Dennis

Cannot Access the Service Partition after installing Lenovo Driver and Application Installation

I recently upgraded my Lenovo 3000 H210, M/T 5355-2NU from Windows Vista Home Premium (64-bit) to Windows 7 Home Premium (64-bit) with the media received through the Windows 7 Home Premium Upgrade Fulfillment Program.
I installed the 64-bit version of the Common Components Installation v1.0.0.8 and restarted the computer and then installed the 64-bit version of the Lenovo Driver and Application Installation program, v5.1.0.0900. After
restarting the computer, I receive a message box stating "Cannot access the Service Partition". If I click on
Lenovo Driver and Application Installation on the Start Menu, I receive an error that the installation has not
completed. Restart to complete the installation. If I restart the computer, I am back to the first error.
Any idea how to resolve this situation?
Any help is greatly appreciated. Thanks in advance.
-Larry

I am having the exact same problem. It's driving me nuts. I also downloaded and attempted to reinstall the factory software from Lenovo's site. It installs but will not launch, giving me the following error message: "This software is for intallation on a Lenovo computer." Or words to that effect.
Hopefully someone knows the answer. Tried tech support twice. Ugh... Thanks in advance.
Lenovo 3000 H210 Desktop, 64-bit, Intel E5200 Duo Core, 4GB RAM, 320 GB Hard Drive

Polygonal Lasso tool issues in newly installed Photoshop CS6 on IOS X Lion 10.7.4

I'm using a new install of Photoshop CS6 (via creative cloud) on a new iMac and getting superb performance aside from constant issues with the polygonal lasso tool.
All the other variants of the tool work fine without fault, but when using the polygonal selection , either the first 'point' won't register or subsequent 2nd or 3rd points won't register, causing photoshop to hang for a second then fill the marquee incorrectly.
I'm using a magic mouse and also tested it with a USB Logitech but still getting the same issue.
3.4ghz Intel Core i7 Quad core iMac
16GB Ram
OS & Photoshop on a SSD
Scratch Disk 1TB internal HD
2GB Video Card
IOS X Lion 10.7.4
... latest OS update
... latest photoshop update
Any help much appreciated ...

same here!
very unpredictable behavior from polygonal lasso tool with apple magic mouse and fresh wacom intuos 5 large.
work on imac 27" i5 late 2013 with 32GB RAM and mac pro 2006 with 16GB RAM
- can observe unsteady and unpredictable behavior of the polygonal lasso tool
in 10.7, 10.8 and 10.9 meaning it wont react on my click and "hang"
or suddenly fill the lasso selection as complete, when i just do a simple click.
- can reproduce this behavior with my apple magic mouse over usb, wireless and
more frequently with my wacom intuos 4 and 5 over usb.
- even on my latest imac 2013, newly installed only photoshop cs5 and cs6, i can reproduce much more strange behavior fo this tool ever: the first point/click won't register at all, it feels like the polygonal lasso tool hangs and waits and nothing happens. i click on another tool, click back on poly.lasso and try again. after the second attempt, after seconds of waiting, the third click always fills the selection as completed, although i am not finished with my selection at all
any idea why?
love working with polygonal lasso, although it reacts very unstable and unpredictable since years and versions !!

Newly installed Photoshop Elements 3 not launching - help!

Hi there,
just installed Photoshop Elements 3 on the new G5 iMac - both bought a couple of weeks ago from Apple store on-line.
Installation of PE3 seemed to go ok.
But double-clicking the application makes it blink a couple of times in the dock, and then nothing. Tried removing and re-installing a few times..but the application never launches. Any thoughts as to what I can do to fix this?
Is this an issue with Tiger or with PE3? Or incompabability between the two?
Any help would be appreciated!
iMac G5 20" 2.1Ghz 1.5Gb RAM Mac OS X (10.4.3)
iMac G5 20" 2.1Ghz 1.5Gb RAM Mac OS X (10.4.3)

Hi there,
I recently transferred my old files + apps across using migration assistant from the old iMac (which had been running OS X 2.8 Jaguar). When I first tried to install PE3, immediately after insertion of the disc, a Norton anti-virus disc checking screen came up and tried to check the disc. I cancelled the scan, and carried on the installation. When PE3 wouldn't launch, I figured it might be something to do with the anti-virus software. The Norton stuff was installed on my old machine - but I didn't want to use it for the new mac as I heard bad things about it. I couldn't figure out how to remove all the Norton software, until I came across some good advice in another area of the discussions. I have now successfully removed all Norton files from the iMac. However, despite trashing the PE3 app that wouldn't launch, and then installing it again, I still can't get PE3 to actually launch. Neither from the dock, nor from the applications folder. It just moves up and down once in the dock, and then does nothing. Deleting from the dock, and then launching from applications, the same thing happens, the PE3 symbol appears in the dock, moves up and down once, but then disappears.
Very frustrating. I know the application works well with Tiger, as I've seen it in the Apple store in London... so there must be something I'm doing wrong...
any more thoughts?

Bridge does not work in newly installed Photoshop CS6

Having installed a recently purchased copy of Photoshop CS6, I have not been able to use the bridge function. The earlier copy of Photoshop CS5 functioned correctly. The current operating system is Windows 8.1.
All help options, so far investigated, have referred to Creative Cloud, but I only have Photoshop CS6 and do no intend to use Creative Cloud.
Help would be much appreciated.

When Bridge is active and I try to open a picture in Photoshop, there is no link to the program. The picture, if it is made visible at all, appears in a basic computer graphics system (Windows photo viewer etc.), not Photoshop.

Cannot access boot from Mac OSX install Disc-frozen cursor

Twice a month I do some housekeeping and clean up my Mac--run scripts, verify preferences, repair permissions, etc. Quarterly I boot from the installation disc to renew any start up info that may have become corrupted.
My IMACG5 won't allow me to do this now. I put the disc in, and shut down the machine. I start it up again while holding down the C key but when it is finished booting from the disc my mouse cursor is frozen on the screen and I cannot acess anything. I have a battery operated mouse and I always check to make sure there is sufficient battery life.
Does anyone have any suggestions as to what is up and how I resolve this issue? At this point I won't be able to wipe my hard drive and re-boot everything fresh from my installaion discs because the cursor is frozen.
IMACG5 Mac OS X (10.3.9) wireless keyboard and mouse

Hello jaqueline & Welcome to Apple discussions
I put the disc in, and shut down the machine.I start it up again while holding down the C key but when it is finished booting from the disc my mouse cursor is frozen on the screen and I cannot acess anything.
I hope you mean Restart and not Shut Down.
Insert CD, under Apple drop down menu -> restart after/ at the chime hold the c key dowm till the gear/ wheel stops spinning .
http://docs.info.apple.com/article.html?artnum=107199
Please let us know keep us all posted,
Eme

Cannot get a newly installed Photoshop CS1 application to start up.

I have a PowerMac G5 desktop computer that has been freshly installed with Mac OS X 10.5.4. Using Adobe Creative Suite 1, I did a custom installation of Photoshop CS & ImageReady CS, and also InDesign CS.
InDesign and ImageReady started up with no problems. But after I double-clicked the Photoshop icon I got a window with the message: "Could not complete your request because of missing or invalid personalization information."
So I trashed the Photoshop & ImageReady folder and re-installed them again. But I'm getting the exact same results as before: ImageReady starts up alright, but Photoshop displays the same window and message.
All the other Adobe CS1 applications I've installed are starting up alright. Can you tell me what's causing this problem and how to fix it? Thanks for your help!

Did you have another version of PS on there?
http://answers.yahoo.com/question/index?qid=20070613163307AALZreN
Interesting solution here...
1. Control+Click the Adobe Photoshop CS application file within the Applications > Photoshop CS folder and select "Show package contents".
2. Open the Contents folder, then open the Resources folder.
3. Locate the USERREG file in the Resources folder, and drag it to the desktop. Keep the Resources folder open.
4. Control+Click the Adobe ImageReady CS application file within the Applications > Photoshop CS folder and select "Show package contents".
5. Open the Contents folder, then open the Resources folder.
6. Locate the USERREG file in the Resources folder, and copy it to the Resources folder for Photoshop.
7. Launch Photoshop, and launch ImageReady to be sure the file was copied to Photoshop.
http://www.justskins.com/forums/invalid-personalization-information-ps-62462.htm l

New v7 installation cannot access any help/online features via photoshop

Hi, have just bought new version 7, and having problems when trying to access help, on line support, photoshop elements online and one line learning resources. any online access automatically opens up MS Word 2007 (have Office 2007) which then just shows the hyperlinks via a word doc.
I have reinstalled 3 times, each time, complete uninstall, cleared rubbish bin, registry and temp files etc plus rebooted computer after each installation. I have also shut off nortons virus and firewall before installation. Also followed putting full file installation onto desktop and install from that, again to no change in my access. This is annoying as I would like to have direct access to the help files, and online learning.
Even when the first screen pops up giving you the options to go to organizer, edit etc, anything I click on that will not open any internet web based access.
I am using a fairly new laptop, only a few months old, has Visa Home Premium, Internet Explorer V 7.0.6 and I generally keep everything up to date with updates but confused by this problem.
Any suggestions on the problem would be great. I am a registered user and own all the disc's this was not a download of the program. Have not had this problem before with any versions, including from Version 1.
Ailsa

I wonder if this Adobe tech note applies:
http://go.adobe.com/kb/ts_kb409025_en-us
It describes the situation in which the Windows registry settings for the HTTP protocol are damaged, so PSE doesn't know which browser to open when it tries to do some Web operation (such as opening online Help). It seems similar to your situation -- it appears that perhaps somehow Word has been configured as the "browser" on your system!
Since this involves modifying the registry for a core part of your system (handling HTTP), I'd follow the instructions extremely carefully (they included making a backup of the registry). Better set a Windows restore point before undertaking this.

Newly installed photoshop 6 not recognizing my scanner, not allowing me to import scans

I switcjed from cs 2 to cs6 when i got a new imac and for some reason even though it seems like I've installed the scanner driver successfully, and the computer recognizes the scanner, it does not show up as import option in photoshop. is scanning into photoshop cs6 different from cs2? do i scan in some way that does not use the import button?

Seehttp://helpx.adobe.com/photoshop/kb/twain-plug-photoshop-cs4-cs5.html

Can't open jpg from Windows 7 Explorer in newly installed Photoshop Elements 11

Elements opens but the image does not appear in the editor.
Other people have reported similar problems but I cannot find a solution.

I got hit with the same issue ... but found a simple clean answer (after a while):
The "default program" ("recommended program" when you use "open with" in the explorer context) which is associated with a file extension ultimately points to the following command: "C:\Program Files (x86)\Adobe\Elements 11 Organizer\Photoshop Elements 11.0.exe" "%1", which is the PSE Organiser
This command didn't work for me (not even from the command line does this work, so it's a bug). I guess it gets hung up at the welcome screen in the background
I changed the "default program" / "recommended program" to point directly to the Photoshop Elements Editor. Then it works as it should.
To do this cleanly, you need to delete the wrong "default program" entry by deleting the relevant entry in the Windows registry for each picture file extension associated with PSE 11:
For example, on WIndows 7 64bit, the relevant registry entry for .cr2 files (Canon raw format) is HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.cr2\OpenWi thList
and may have several entries labled a, b, c...., one points to Photoshop Elements 11.0.exe - delete it.
After the clean up, go into WIndows Control Panel, select Default Programs, Associate a file type or protocol with a program and then for the first file extension use "Browse" to find the PhotoshopElementsEditor.exe and select it (mine was at C:\Program Files (x86)\Adobe\Photoshop Elements 11).
Afterwards, you need to do this for each additional file extension you want to link with PSE 11, but you can pick it now from the Recommended Programs list
Since I only use raw and JPEG, I only needed to change this for .cr2 and .jpg - you may need others as well...
If you are not sure which program (Organiser or Editor) is now shown under the "Recommended Progams" list when you use "open with" from Explorer?
Photoshop Elements Organiser
Adobe Photoshop Elements 11
Adobe Systems, Incoporated <====== note the comma after Systems
Photoshop Elements Editor
Adobe Photoshop Elements 11
Adobe Systems Incoporated <====== note the absence of the comma after Systems
Hope this gets you working more productively....
Chris - IT support for www.photo2m.ch

Newly installed Photoshop Elements 12 doesn't open up on my computer.

I can't get past the task menu bar. how do I open up and use photoshop elements 12? I've clicked on Organizer to start organizing media and that didn't work. I clicked on Photo Editor to launch Photoshop Elements Editor and that didn't work.

Which OS are you on?
Please try launching Organizer and Editor from their exe location instead of welcome screen. On windows, double click the exe located at -
C:\Program Files (x86)\Adobe\Elements 12 Organizer for PhotoshopElementsOrganizer.exe
and
C:\Program Files (x86)\Adobe\Photoshop Elements 12 for PhotoshopElementsEditor.exe
On MAC, click the respective executables from Applications.
Thanks
Andaleeb

Please could someone advise me as to why I cannot access the 3D functionality on my photoshop trial.

Thanks.

Edit your Photoshop Preference make sure you GPU is enabled and check menu Help>system info,,, make sure Photoshop see at least 512MB video memory on you video card. 3D requires a supported video card GPU with at least 512MB VRAM.

Our newly installed Photoshop Elements v.10 constantly locks up in the Organizer.

A small window pops open stating that Elements Organizer is not responding & giving the choice of either closing the program or waiting for it to respond. I we wait 5-6 minutes it will respond but then lock up again as we navigate. Our PC has 3M RAM and the C drive is less than half full so I think the computer resources are ok. We have 5000+ photos in the catalogue. What do I to to fix this annoying issue?

Please try reseting the prferences of the PSE.
Also launch the catalog manager(file>Catalog) select you catalog and click optimize, then repair.
relaunch the PSE, and check out is there any change.
Thanks and regards
harshit yadav

5 of my apps in the app store on my I pad are frozen at installing. I cannot access the apps to usze them or complete the update process.

My ipad app store is frozen for 5 apps insalling. I cannot access the apps or finish installing updates

If the App Store itself is frozen, quit the app completely and reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If the updates themselves have stalled - try some of these things and see if they help.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

I cannot access "bridge" on my newly installed Photoshop CC.

Similar Messages

Maybe you are looking for