I cannot access CF10 developper built in server remotely

Just successfully installed CF10 developper ediiton with built in server
I can access the web pages from the dev server on
http://localhost:8500
or
http://192.168.1.49:8500
But I cannot access the pages from a remote computer on the same network
Any suggestion would be welcome

Such kind of locking CF server access by local dev. machine was normally done by resetting the value of
<attribute name="interface">*</attribute> attribute
to
<attribute name="interface">127.0.0.1</attribute>
of <service class="jrun.servlet.http.WebService" name="WebService"> service of jrun.xml file but it was done till CF 9 server through this jrun.xml file attribute change.

Similar Messages

Cannot Access EAC/ECP on exchange server 2013 after installation

Hi,
I can not Cannot Access EAC/ECP on exchange server 2013 after installation . Error 404.4 code 0x80070002
Help!
Thanks,

Hi Florin
Did you try accessing EAC by using below link
https://<Exchange_2013_CAS_FQDN>/ecp?ExchClientVer=15
Please access EAC via Internal URL: https://<CASServerName>/ecp
Finally ensure that you have logged in as administrator as well as this might be problem as well
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Cannot access sapdb backend from Content Server?

I am unable to access my sapdb from my Content Server via CSADMIN or with the /ContentServer.dll?serverInfo page.
I run a Content Server on Unix - version 640, build 16. Here's what I've verified thus far:
- SAPDB is up and running.
- x_server process is running
- apache is running (httpd processes)
- Standalone gateway on same server is running.
In the apache error logs I find the following message:
ErrorDescription: Cannot start Document request, reason: SQLConnect
failed, [MySQL MaxDB][LIBSQLOD SO][MaxDB] Invalid authorization specification;-4008 POS
(1) Unknown user name/password combination, Error
Code: -4008\r\nX-ServerId: server="nwkwcs";serverPort="1090"\r\nX-
ServerType: SAP HTTP Content Server\r\n
I had not changed my SAPR3 user or password in the database, so I am confused why this started happening all of a sudden?
In an attempt to fix, I reset SAPR3 to custom password and ran report
RSCMSPWS to store the new password in the cs.conf file. However, the
same error is still a result.
So, I deleted and recreated SAPR3 based upon SUPERDBA profile with default "SAP" password.
Then, I commented out DBNAME and PASSWORD in cs.conf file. So, it should be using the default SAPR3/SAP login to the database.
However, this did not help either.
I looked at note 706664, however I cannot even get the repositories to a defined status. I cannot connect via CSADMIN?
Here's an excerpt from the http://server:port/ContentServer/ContentServer.dll?serverInfo page for
further analysis:
serverType="SAP HTTP Content Server";serverVendorId="SAPAG";
serverVersion="640"; serverPatch="0";serverBuild="16";
pVersion="0046";serverStatus="running";serverDate="2008-07-
10";serverTime="13:58:28";startUpDate="2008-07-10";
startUpTime="13:58:20";lastAccessDate="2008-07-
10";lastAccessTime="13:58:20";
contRep="Z_EKM_IWBHELP";contRepStatus="offline";contRepStatusDescription="SQLConnect failed, [MySQL MaxDB][LIBSQLOD SO]
[MaxDB] Invalidauthorization specification;-4008 POS(1) Unknown user name/passwordcombination, Error Code: -
4008";storageVersion="17";storage="SAPDB";buildLevel="1";contentStorageName="SDB";contentStorageHost="localhost"; security="1";contRepDescription="Content Repository for IWBHELP";
I am unsure why the Content Server will not connect to the database?
Points to all helpful answers!
Thanks,
Jeff

Hi,
How did you resolve this problem ?
Thanks,
Hemant

Cannot access index.html in Weblogic Server 8.1

Hi...
          I have configured a domain in /appl/bea/user_projects/domains/test. Then uploaded index.html to applications/. Started the server but when I tried to access http://172.42.100.2:7001/index.html I got the error -> Error 404--Not Found. However I can access the web console. How can I access the index.html?Is the way to deploy html is different from Weblogic 7? Tks.

Hi CaoCao,
          Go through the following link,In that you will find exact information on this issue.
          http://e-docs.bea.com/wls/docs81/quickstart/quick_start.html
          ----Anilkumar kari

Solaris 10 11/06 - Cannot access external web sites from server

Hi,
I am relatively new with Solaris so I hope this is something simple. I just installed Solaris 10 11/06 with the `Secure By Default` option.
From the command line I can use dig and nslookup to resolve external web sites fine, but if I try to use the update conection manager (desktop), mozilla browser (desktop), or pkg-get (command line) it fails to resolve the external sites. I have a valid resolv.conf file and I have named installed and running.
It is on a LAN with other servers that have no problems with external access. I am running as root in all instances, so is there some permissions issue I am missing with this install/release?
I don't want to open up the install more than I have to.
Thanks,

Hi again,
I figured it out. The nsswitch.conf file was not referencing dns as part of the `hosts` and ipnodes` resolution methods. Once I added this and restarted named it worked.
group: files
hosts: files dns
ipnodes: files dns
networks: files
-----------------------

Cannot access search engine - maybe "search" is not recognised as a context

Hello,
I cannot access the search engine
http://server:port/search
doest not work.
Maybe it is linked to another problem:
I wanted to make a mapping between a
context and a directory,
but "additional directory document" does not work.
So I created another Web Application
(in web-apps.xml)
so maybe search is not recognised as a context.
well I don't know, and I wish someone had this problem and has a clue.
Thank you very much in advance,
Pascal

Hello,
first, thanks a lot for answering,
and sorry for the poor description
- the request to access the search functions of Sun One
is: http://server:port/search
- If I define a web app (in web-apps.xml)
with an empty context
and whose document root is /docroot,
the request http://server:port/search
does not work
error: "file /docroot/search not found"
- If I define a non empty context for my app
the request http://server:port/search is OK,
but I will have to make a lot of modifications
in my app :-(
Do you think there is a way to make Sun One 6 understand
that "/search" is not a subdirectory of
my app even if my app has an empty context?
Thanks a lot,
Pascal

Windows 7 pro client cannot access folders on server 2003 domain server

I added a windows 7 64 bit client to a server 2003 32 bit domain 3 weeks ago and file sharing was working fine until today, 5/4/12. Now, when trying to access shared folders that reside on the server,
I get the following "access denied" message:
[…folder…] is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The user name could not be found.
Strangely enough...
The windows 7 client
can open shared folders that reside on the XP clients in the domain
All the XP clients in the domain can access the server 2003 folders
All the XP clients and the server 2003 machine can access shared folders and printers on the windows 7 client.
The windows 7 client can ping the server 2003 machine and vice versa
I can “see” the server in my network list, but when I click on it, I get the same “access denied” message listed above.
So... the only problem is that the windows 7 client cannot access folders that reside on the windows server 2003 machine. There must be some sharing setting that got changed
by a recent windows update.
Here is what I have done/verified so far on the windows 7 client:
In advanced sharing settings for Home/Work, Public and Domain profiles:
network discovery is enabled
file and print sharing is enabled
use user accounts and passwords to connect to other computers is selected (I also tried allowing windows to manage homegroup connections instead, but the problem remained.)
40 -56 bit encryption is enabled
In “gpedit.msc” Local Policies/Security Settings:
enabled the following policies:
Network access: Allow anonymous SID/name translation
Network access: Let Everyone permissions apply to anonymous users
disabled the following policies:
Network access: Restrict anonymous access to Named Pipes and Shares
Network access: Do not allow anonymous enumeration of SAM accounts
Network access: Do not allow anonymous enumeration of SAM accounts and shares
What am I missing? Are there policies on the server that need to be adjusted?
Please help! My business is crippled if I cannot access server files from this workstation. Thank you in advance.

As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous
steps should be helpful for many similar scenarios.  <o:p></o:p>
If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to follow it up. You
can also choose to unmark the answer as you wish.  <o:p></o:p>
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar
problems.  <o:p></o:p>
Thanks!<o:p></o:p>
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

I have my Calendar app syncing with iCloud. Every time I open it it says, "Moving Calendars to Server Account..." It runs and runs and does not stop. As a result, I cannot access my calendars. Please help.

I have my Calendar app syncing with iCloud. Every time I open it it says, "Moving Calendars to Server Account..." It runs and runs and does not stop. As a result, I cannot access my calendars. Please help.

I have the same problem, I tried the solution of Dr Cox but that didn't work as he said go to system preference then mail, contacts etc. but I don't have that. Can someone help?
Elaine

Server 2012 R2 SMB - The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

Hi,
We are having issues with Server 2012 R2 SMB shares.
We try to write some changes to a file, but we first create a temporary backup in case the write fails. After the backup is created we write the changes to the file and then we get an error:
The process cannot access the file '\\server\share\test.txt' because it is being used by another process.
It looks like the backup process keeps the original file in use.
The problem doesn't always occur the first time, but almost everytime after 2 or 3 changes. I have provided some code below to reproduce the problem, you can run this in a loop to reproduce.
The problem is that once the error arises, the file remains 'in use' for a while, so you cannot retry but have to wait at least several minutes.
I've already used Process Explorer to analyze, but there are no open file handles.
To reproduce the problem: create two Server 2012 R2 machines and run the below code from one server accessing an SMB share on the other server.
Below is the code I use for testing, if you reproduce the scenario, I'm sure you get the same error.
We are not looking for an alternative way to solve this, but wonder if this is a bug that needs to be reported?
Anybody seen this behavior before or know what's causing it?
The code:
string file =
@"\\server\share\test.txt";
if (File.Exists(file))
File.Copy(file, file +
".bak", true);
File.WriteAllText(file,
"Testje",
Encoding.UTF8);
The error:
System.IO.IOException: The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

Hi,
There is someone else having the same issue with yours. You could try code in the article below:
“The process cannot access the file because it is being used by another process”
http://blogs.msdn.com/b/shawncao/archive/2010/06/04/the-process-cannot-access-the-file-because-it-is-being-used-by-another-process.aspx
If you wonder the root cause of the issue, the .NET Framework Class Libraries forum can help.
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

User cannot access redirected Documents folder, but can connect to share in Windows Explorer and access folder on server

I am in the final stages of a cross-forest migration. Users have Windows 7 workstations with redirected folders on a Windows Server 2012 box running in the old forest. User accounts were not migrated. The accounts in use have always
been in the "new" forest. One of our challenges was the large volume of data in redirected folders. I made sure users in the target forest had continued to have access to their redirected folders in the old forest and robocopied
the entire users share, copying the permissions with the files. By doing incremental robocopies, we can get a final copy done now in about six hours. The plan was simple: copy the files, do an incremental copy every night, on the night of the cutover
change the folder redirection policy Documents path from
\\oldserver\users\%USERNAME% to
\\newserver\users\%USERNAME%. The policy is configured to NOT copy user files from the existing folder to the new redirected folder. Everything was going well until I tested the policy change. After the folder redirection policy is updated
and applied, the user cannot access the private Documents folder. For example, user Chester Tester logs on as ctester. I open Windows Explorer and click the Documents shortcut. I see one subfolder, which is subfolder of Public Documents.
So I can look at Public Documents but when I click on the Documents folder (Under the Documents library link) I get an access denied error. Now for the kicker, if I open another Windows Explorer window and edit the address bar to
\\newserver\users\ctester, I can navigate the Documents folder tree and see my thousands of documents. What the ....?
I'm hoping this is something really simple to fix!
TIA

HI Vivian,
Thank you for your reply. Yes, the path in Group Policy Folder Redirection Root Path was updated to
\\NEWSERVER\users. I had planned to point this to the distributed file system, so the first used was actually
\\domain\dfs\users. To simplify things I have backed off to copying to just a normal share
\\newserver\users.
We are using BASIC folder redirection and we create a folder for each user under the root path.
We did not want the policy to move content, as we were seeing users requiring 15-20 minute logon times (or higher) after the policy is changed.
Grant the User exclusive right to Documents - Disabled
Move the contents of Documents to the new location - Disabled
Related folder settings
Video - Follow Documents
Music - Follow Documents
Pictures - Follow Documents
Now when I change the folder redirection from old server to new server I now have TWO My Documents folders in the user's redirection folder on the server. The redirected Documents points to an empty folder set. The copied folders with all user
data are there, but folder redirection refuses to recognize the original folder.
I am looking at the full view of the folder, nothing hidden, so I'm wondering how a folder can have two subfolders with the exact same name. For now, I just want the redirection to move from the old server to the new server properly. I deleted
the new My Documents folder, rebooted the user's workstation and tried again. The behavior repeats itself, i.e., a new My Documents folder is always created when the redirection policy is changed from the old server to the new server. The environment
has about 1500 users with approximately 1.3TB of data in the redirected Documents folders. OUCH!

OS 10.4 clients cannot access Shared Mac folder on W2k Server - URGENT

We have a network of about 25 computers, 10 or so of them are Mac OS 10.4, the rest are Win XP Pro PCs. We have a server dedicated to file sharing. We basically have one main shared folder called "FILES". This is shared for PCs and Macs. Recently after a restart of the server (for regular maintenance), the Macs could not see the shared Mac volume (FILES), PCs could access the share without a problem. After a few minutes (15 or so) the Macs could all of a sudden see the share and
everything was fine.
However, we just restarted the server again and we're having the same issue again. The difference is, this time, after waiting for a few hours, the Macs still cannot see the Mac Share. The macs connect to the server via TCP/IP, the users use their usernames and passwords and can connect to the server, however, the only volume they see is the Micrsoft UAM volume.
When we created a different folder and shared it (through MMC), the Macs could see and access that one.
We get an Event ID 12061 in the System Event Log as the user tries to connect to the share. I found a Microsoft KB article, but no solution to the problem was given. http://support.microsoft.com/kb/q136300/
Here are some things I have tried to remedy the issue, please keep in mind we cannot change the name of the share (FILES) becuase of the thousands of file mappings in quark, etc.:
Again Restarted Server
Stopped Sharing the folder, then reshared it
Stopped sharing the folder
Uninstalled / Reinstalled Appletalk Protocol from network adapter
Uninstalled / Reinstalled File Services for Macintosh [Restarted]
Uninstalled / Reinstalled Appletalk Protocol from network adapter again [Restarted]
Reshared the folder
Created a new mac share called TEST (Macs could see and access)
Moved data from Files to TEST, now Macs could not see TEST
Moved data back to FILES
Created a folder called FILES2, moved data from FILES to FILES2
Stopped sharing FILES (PC and Mac), renamed FILES to FILES1
Renamed FILES2 to FILES (Macs could not see volume)
It seems as though the problem is with an individual file or two, which sort of corresponds the what Microsoft has written regarding the error.
Has anyone had any experience with this issue? Any insight or solution to this issue is greatly appreciated.
Thank you!

It's very important to be as specific as possible when discussion network service access. In your question, it sounds like you want the macs to attach to FILES using SMB/CIFS, but you also call it a Mac share, so it's not obvious if you mean an AFP share or just a share for Macs to use.
You should know that the Macs can connect to either AFP or SMB volumes, and they can browse for SMB over TCP/IP and AFP over both TCP/IP and Appletalk (Appletalk must be turned on and browsing active in Directory Access).
Connecting via SMB to a volume hosted on Windows2K or higher server will fail with the default settings, which require secure connections not supported by Mac OS X (because Samba doesn't support it). To overcome that problem, see this article:
http://www.macosxhints.com/article.php?story=20030922153448490&query=-5000
(scroll down to one of the top-level replies, which explains in detail how to deactivate secure connections)
You might also be able to improve reliability by editing the SMB settings in Directory Access and setting a WINS server, but it depends on your network.

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

Screenshot of how it looks when i try to show a ms access form inside a iframe:
http://oi58.tinypic.com/2vj4ish.jpg

Windows 7 Desktop synchronisation - Windows cannot access \\server\users\name\desktop

Hi there
My client has a laptop which won’t load the desktop when disconnected from the network. When you log on (while disconnected) you get the error
“Windows cannot access \\server\users\name\desktop”
Works as expected while connected to the network.
The server is a Windows Small Business Server 2003 with active directory etc. and roaming profiles turned on. This issue does not occur on other workstations/laptops.
When I check the Users folder on the local system drive there is not a desktop folder. I assume this is the issue although I’m not sure how you would force windows to create one or why one hasn’t been created?
This is a brand new laptop so my initial reaction was to reset the laptop to factory state and then add the laptop back in to the domain. After this process the issue was still present!
I guess the only thing I should mention is that this was shipped as a Home Premium laptop and was then upgraded to Professional using an upgrade key.
I have checked Control Panel, System & Security, System, Advanced, User Profiles and the account shows as Local with Roaming Profiles greyed out.
Any ideas?
Martyn Fewtrell
[email protected]
Martyn Fewtrell TNC (IT Solutions) Ltd Email: [email protected] Web: http://www.tncit.co.uk

Hi,
I am just writing to check the status of this thread. Was the information provided in previous
reply helpful to you? Do you have any further questions or concerns? Please feel free to let us know.
Regards,
Alex Zhao
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Alex Zhao
TechNet Community Support

Mail cannot access the mail server, but other email clients do.

My web host recently had extended problems with the mail server my sites are on. Now, Mail on my iMac Intel 27 Duo says it cannot access the server. However, Thunderbird and Entourage Mac have no problem. Sending from Mac Mail seems to be Ok as well. I've checked the settings over and over. I received no system disk for this machine when I bought it. Do I need to reinstall Mail, and if so, how?
The info below from Connection Doctor shows it appears to be trying to access through Port 25 but I have Mail set for 587 as instructed by the hosting company. I have renamed private info in the text below.
READ Jan 16 09:56:42.941 [kCFStreamSocketSecurityLevelNone] -- host:mail.myemail.com -- port:25 -- socket:0x11f51aed0 -- thread:0x122c48a20
250-servername-a41.g.webhostname.com
250-PIPELINING
250-SIZE 40960000
250-ETRN
250-STARTTLS
250-AUTH PLAIN LOGIN
250-AUTH=PLAIN LOGIN
250-ENHANCEDSTATUSCODES
250 8BITMIME

However, Thunderbird and Entourage Mac have no problem. Sending from Mac Mail seems to be Ok as well. I've checked the settings over and over.
Well if TB and Entourage can both send and receive but Mail can only send I can only conclude you missed something in you rechecking. Of course with you being the only one checking you are going to make the same "mistake" and never no it. So post the relevant POP server info for your ISP (edit out personal info and passwords of course):
Account Info:
Incoming Mail server: pop server address
User Name:             required user name POP server is looking for (censor)
Password:              password required by POP server (censor)
Advanced:
Port:      995, 25, default?
Use SSL:   yes or no
Auth:      kind of authentication

Hard Drive Server ok on 10.5.8, cannot access on 10.6 Snow Leopard

Have Mac Mini w/3GB Memory 500GB internal drive, running great on leopard 10.5.8, can login and access (read-write to ethernet Hard Drive server dlink DNS-323, loaded friday 10-18 Snow Leopard 10.6, Everything running ok, attempted to access DNS-323 asks for user name & password as usual, type in user, pw, comes back with messagae - Incorrect User name and or Password, Restored to external drive old 10.5.8 using TM, Booted from external drive, Access to DNS-323 OK, Switched back to 10.6, access fails, spoke to 2 levels of tech support at apple, they do not have any idea, tech took capture, will attempt to have an engineer look into it, stated that external Ethernet equipment is not directly support by Apple??. Can ftp to DNS-323 can copy files but do not have write access??. something changed in 10.6??, can anybody help or does anybody have any ideas, attempted to use different variations of FINDER GO CONNECT SERVER options using network name and ip's Still N/G.
Thanks

Well, I had the same situation after upgrading to 10.6 (as if the 10.6 installation wasn't already hard enough). I went poking around Google and I found a forum on the D-Link website with people like us with the same problem.
In two of those forums, I saw some had upgraded their DNS-323 firmware from 1.06/1.07 to 1.08 (beta). Mind you, 1.08 is a BETA and that some people on the D-Link forum had problems after upgrading the firmware. Specifically, issues concerning automatic formats of HDs after the upgrade and others ( I can't remember them all).
I downloaded the 1.08 firmware and upgraded the firmware. However, to ensure that my HDs were not formatted or corrupted by the new firmware, I shut down the DNS-323 and took out the HDs. Then I uploaded the firmware without the HDs. after the firmware upload was successful, I shut down the server, and put the HDs back into the server. The BETA firmware definitely worked for me and I was able to mount my file share.
The only thing that didn't work for me was the mail feature. I put all the correct settings into the mail section to give me daily reports and logs of the server. However, when I tried to send a test message, the server's web administration site timed out on me for five minutes. Although this does not affect the mounted file share (I was able to read and write to my server during the timeout), i cannot get daily logs of my server's activity.

I cannot access CF10 developper built in server remotely

Similar Messages

Maybe you are looking for