I cannot access ladder diagram components in student version

I'm using Multisim 10.1, student version. In the database manager I can see all the ladder diagram components, but when I go to 'place component', the folder is empty. Any ideas on how to access these?

Hello,
Ladder diagrams/components are not included in the Student edition, they are included in the Educational edition. Here is a comparison table between both editions:
NI Multisim and NI Ultiboard Academic Features
Best Regards,
Fernando D.
National Instruments

Similar Messages

  • I cannot access Firefox (didn't like new version, so did System Restore to go back to 3.6.15).

    I'm using a laptop with Windows XP. I updated to newest version of Firefox, but really didn't like some changes it made, especially to my Gmail. So I did a System Restore. Since then I have not been able to access Firefox, although I've tried 4 different ways several times--it just won't come up on the screen, so I've had to use Internet Explorer. I went to the control panel (Add or Remove Program), and found that I still have version 3.6.15, and it even says that I last used it today, even though it never came up on the screen. I hope that someone can help me with this problem. I. E. is slow!

    http://www.mozilla.com/en-US/firefox/all-older.html

  • I cannot access my talktalk inbox since the version 5.0 was set up, why is this and what can you do to enable me to access my inbox? thanks

    I have never had problems accessing my talktalk inbox, contacted talktalk and they informed me that it is something to do with Firefox and not them. PLEASE HELP!!

    It will take longer to charge the 5G's battery than either the 3G or 4G's battery.
    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source like a computer's USB port
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • I transferred my CS 6 applications to a new computer, and now cannot access Illustrator, only the trial version of creative cloud. How can I access the software I own?

    I bought a new Mac Pro, transferred my CS software to it from my old Mac Pro, now I cannot access Illustrator, only the trial cloud version. How can I use the software I have already purchased?

    Just to clarify, in case this helps anyone. I transferred the whole CS 6 suite using Apple's migration assistant, and the only program in the suite that could not be accessed except through the trial cloud version was Illustrator. After over an hour on the Adobe support chat, it turned out that I needed to follow the prompts to purchase the cloud version, then type in the serial number for my CS software at a certain point in the process. There you go.

  • The version of GroupWise you are using cannot access this post office

    I built a new Server and added it to my PCSD Tree. The new server name is
    GroupWise and has an IP Address of 10.10.0.13.
    I followed the GroupWise 7 Installation Guide and installed GroupWise to
    this server. At no point did I find any place to enter the GroupWise
    License.
    During the install I discovered that 4 of my long time employees were not
    able to be assigned to this new GroupWise server. It appears that a one
    time (Long time ago) these 4 employees were part of an old GroupWise Mail
    server that must have been removed. I can not find any reference to this
    old GroupWise server. My thought is to delete the accounts for there 4
    users and recreate the accounts.
    However the larger problem is this: I can not login to the GroupWise
    Server. Below are two screen shots of what I’m getting when I
    launch the GroupWise 7 Client. When I look at the .NLM loaded on the
    Server for GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
    Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
    On the Client, when I launch GroupWise, The Novell GroupWise Startup has a
    message in the message window “The version of GroupWise you are
    using cannot access this post office”. Then after clicking OK three
    times, the following message appears on the screen “GroupWise did
    not initialize successfully, Please run GroupWise Setup, or contact your
    system administrator. Unspecified error OLE Error 80004005

    *During the install I discovered that 4 of my long time employees were not
    able to be assigned to this new GroupWise server. It appears that a one
    time (Long time ago) these 4 employees were part of an old GroupWise Mail
    server that must have been removed. I can not find any reference to this
    old GroupWise server. My thought is to delete the accounts for there 4
    users and recreate the accounts.
    **You need to disassociate these four NDS users from any GW attributes.
    Right-click each user in C1, GroupWise Utilities->GW / eDirectory
    Association->Disassociate GroupWise Attributes.
    *** When I do as instructed I get the following error:
    [username] is missing the following attribute: NGW: Post Office
    ~~~~~~~~~~~~~~~~~~~~~~~~
    *GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
    Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
    **If the post office is closed, you need to determine why this is. On the
    MTA, hit F10, Configuration Status, highlight your PO and hit enter,
    select details, then look at the last closure reason.
    *** Last Closure Reason= Missing or incomplete address information
    [ When I installed GroupWise, I wanted all the e-mail to be stored on the
    EMAIL Volume. During the install, I Changed the Install Directory to
    \Groupwiseemail. After the install I have two directories in this volume.
    One called DOMAIN and the other called PCAM (PCAM is name of my domain).
    ~~~~~~~~~~~~~~~~~~~~~~~~
    *On the Client, when I launch GroupWise, The Novell GroupWise Startup has
    a message in the message window 'The version of GroupWise you are
    using cannot access this post office'.
    **What version of GroupWise is on the server and what version client are
    you
    using? Also, if you pull up the properties of both the domain and post
    office in C1 what is the database version listed as?
    *** I installed GroupWise 7 both Server and Client. I'm thinking this is
    due to the Post Office being closed. I only have 1 Post Office.
    Thank You;
    Lewis

  • Excel Automation with Interop - Windows Service - Microsoft Excel cannot access the file

    I have a windows console application, which automates Excel. In our scenario the application gets called from a Windows Service. If the console app is executed directly everything works fine. If the console app is executed through the Win Service, we get
    the following error when trying to open the excel file:
    Unhandled exception Occured : 'Microsoft Excel cannot access the file 'bla.xls'. There are several possible reasons:
    The file name or path does not exist.
    The file is being used by another program.
    The workbook you are trying to save has the same name as a currently open workbook.'.'
    The code snippet used to open the file:
    xlApp = new Application();xlApp.Visible = false;xlApp.UserControl = false;xlApp.Application.ScreenUpdating = false;xlApp.DisplayAlerts = false;xlWorkbook = xlApp.Workbooks.Open( Filename: filePath,  UpdateLinks: 2,  IgnoreReadOnlyRecommended: true, Editable: false);
    The console app and windows service are running on a Win Server 2008 64-bit OS with Excel 2013 32-bit installed. The service is running with a special user account, which has all the right permissions on accessed files and folders. The excel process is also
    started with the same account (I cheched that one). 
    I already tried to do the following, but to no avail:
    Run excel.exe /automation -> worked fine
    Created the folders and also gave full control to the account under which the service is run (even gave full control to Everyone)
    C:\Windows\SysWOW64\config\systemprofile\Desktop
    C:\Windows\System32\config\systemprofile\Desktop
    Configured DCOM
    Excel Application -> Identity -> Specific user account
    Excel Application -> Identity -> Interactive User
    Excel Application -> Security -> Launch permissions -> Everyone full control
    Several combinations of the above
    So I really am stuck with this problem right now. Any input on this is appreciated.

    I have a windows console application, which automates Excel. In our scenario the application gets called from a Windows Service. If the console app is executed directly everything works fine. If the console app is executed through the Win Service, we get
    the following error when trying to open the excel file
    Microsoft does not currently recommend, and does not support, Automation of Microsoft Office applications from any unattended, non-interactive client application or component (including ASP, ASP.NET, DCOM, and NT Services), because Office
    may exhibit unstable behavior and/or deadlock when Office is run in this environment.
    If you are building a solution that runs in a server-side context, you should try to use components that have been made safe for unattended execution. Or, you should try to find alternatives that allow at least part of the code to run client-side.
    If you use an Office application from a server-side solution, the application will lack many of the necessary capabilities to run successfully. Additionally, you will be taking risks with the stability of your overall solution.
    You can read more about that in the
    Considerations for server-side Automation of Office article.

  • Cannot delete file Windows2Local/Components/{multiple}.settings

    Every time I shutdown JSE it shows a couple of ugly messages saying:
    "Cannot delete file Windows2Local/Components/classes.settings in C:\Documents and Settings\Joost\.jstudio\Ent8\config"
    "Cannot delete file Windows2Local/Components/sources.settings in C:\Documents and Settings\Joost\.jstudio\Ent8\config"
    "Cannot delete file Windows2Local/Components/watches.settings in C:\Documents and Settings\Joost\.jstudio\Ent8\config"
    "Cannot delete file Windows2Local/Components/properties.settings in C:\Documents and Settings\Joost\.jstudio\Ent8\config"
    "Cannot delete file Windows2Local/Components/designpattern.settings in C:\Documents and Settings\Joost\.jstudio\Ent8\config"
    "Cannot delete file Windows2Local/Components/threads.settings in C:\Documents and Settings\Joost\.jstudio\Ent8\config"
    Assuming that JSE had some problems to access my profile (oh, how I *hate* Windows...) I wanted to change the JSE working directory to C:\Projects\Java Studio Enterprise, but I can't find the place within the Tools|Options where I can set that. Help!
    Regards,
    Joost

    Thanks for the reply. I added the -userdir option, and now it complains:
    "Cannot delete file Windows2Local/Components/ComponentPalette.settings" in C:\Projects\Java Studio Enterprise\config"
    "Cannot delete file Windows2Local/Components/CollaborationExplorer.settings" in C:\Projects\Java Studio Enterprise\config"
    Hmmm, it seems to me that - although the number of error messages has been reduced - JSE is still not very happy about something. It would be nice if it was a bit more precise in its problem description.
    Regards,
    Joost

  • HT1926 I tried to download the latest version of iTunes but now seem to have lost everything and can not access my library at all. Instead i keep on receiving the message 'Application has failed to start because MSVCR80.dll was not found. I cannot access

    I tried to download the latest version of iTunes but failed half way through. It suggested that i reinstall we I tried. However, i now get this message which states "Application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem"
    I have tried this but with no success. I have therefore found that I cannot access my iTunes library at all now.
    What should I do.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99792)

  • I cannot access my multi-function DAQ hardware from VB/Meas Studio after upgrading to latest Meas Studio Version and NI-DAQmx

    I have a farily complex project that was initially written in VB6.0 with Meas Studio 3.0 and using traditional NiDAQ.  For seveal reasons, I wanted to upgrade to the latest NI software.  So, I purchased the latest version of Meas. Studio.  I installed this, along with NI-DAQmx.  Now, I cannot access any of the hardware from the VB IDE / Meas. Studio DAQ objects.  Nor can I get the installed examples to run.  The test panels run ok from MAX. 
    The whole process of trying to do this upgrade process has been extremely confusing and frustrating.  I have a support request in, but have yet to hear from anyone.  Trying to get useful information on this problem from the NI web site has also been difficult since almost all of the support doucments of any detail reference Labview.
    Any help will be appreciated.

    I'd like to better explain the decision not to provide ActiveX controls for DAQmx. My intention is not to de-legitimize your concern or downplay the pain/inconvenience this caused you.
    The decision not to provide ActiveX controls would be more accurately summarized as a cost/benefit decision.
    DAQmx is an entirely different API. The choice not to support mx with ActiveX controls was not a matter of dropping support from an implementation perspective (I understand that from a product-offering perspective, it is dropping support). Rather, the choice not to support mx with ActiveX controls was a matter of not designing and implementing an entire new set of controls.
    Given our resources, we have to make choices about what languages (C#, VB.NET, C++, VB6), frameworks and versions (.NET 1.1, .NET 2.0, ASP.NET, MFC 7.1, MFC 8.0, VB6), and development environments (VB6, VC6, VS2003, VS2005) that we support. When NI decided that mx was necessary (that is, we could not move forward with new hardware under the old Traditional DAQ API), the Measurement Studio team had to decide which of these languages/platforms/ADEs to support.
    We view the ActiveX controls as native support for Visual Basic 6.0. In March of 2008, Microsoft is going to stop supporting Visual Basic 6.0 (http://msdn2.microsoft.com/en-us/vbrun/ms788707.aspx). It was largely because of this that we did not feel that our customers, as a whole, would gain enough benefit from us developing ActiveX controls to justify the cost. Instead, we developed native .NET and C++/MFC libraries for DAQmx.
    We developed the type library for mx because we did understand that some customers would want or need to use mx boards in existing VB6 systems. While this is not an ideal solution, we hoped that it would be good enough. I am sorry that it doesn't meet your needs.
    Looking back, we see that our customer base has not moved away from VB6 and to VB.NET or C# as quickly as we thought they would. This is why the Measurement Studio product continues to include VB6 support (the UI and Analysis ActiveX controls that you mention) and why we continue to fix bugs in these components. However, we are not putting much effort into developing new features in these ActiveX controls. Almost all of our new feature development efforts are in the .NET libraries.

  • Portal runtime error: Cannot access bean property

    Dear all,
    Does anybody have a clue what problem might couse the <b>Portal Runtime Error</b> described below?
    It does seem to occur when a second user wants to access the <b>Component</b>.
    <b>Portal Runtime Error</b>
    An exception occurred while processing a request for :
    iView : pcd:portal_content/com.xxxxx.luminaires/com.xxxx.iviews/Quotations/EasyQuote
    <b>Component</b> Name : EasyQuoteDemo.EasyQuoteComponent
    Tag tableView attribute model: Cannot access bean property quotationHeader.CurrentTableModel in page context.
    Exception id: 04:50_21/09/04_0070
    See the details for the exception ID in the log file
    Thxs in advance
    Joost

    Hi Dominik,
    Having a closer look at the problem, we found it is not the number of users.
    It seems our JAVA components keeps the conenctions with SAP open and reopens a new one every time we start the component.
    If we finished solving the problem, I will publish the solution.
    Greetings,
    Joost

  • Cannot access null object reference in flex

    Hi All,
    Please provide me the solution ASAP....for the below error........
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
        at Components::References/communicationServicesPort_resultHandler()[C:\Documents and Settings\xp\Adobe Flash Builder 4 Plug-in\LawPadPDA\src\Components\actionscript\ReferenceAS.as:345]
        at Components::References/__communicationServicesPort_result()[C:\Documents and Settings\xp\Adobe Flash Builder 4 Plug-in\LawPadPDA\src\Components\References.mxml:40]
        at flash.events::EventDispatcher/dispatchEventFunction()
        at flash.events::EventDispatcher/dispatchEvent()
        at com.adobe.fiber.services.wrapper::AbstractServiceWrapper/http://www.adobe.com/2008/flex/model/internal::propagateEvents()[C:\depot\DataServices\bra nches\lcds_modeler101\frameworks\projects\fiber-swc\src\com\adobe\fiber\services\wrapper\A bstractServiceWrapper.as:200]
        at flash.events::EventDispatcher/dispatchEventFunction()
        at flash.events::EventDispatcher/dispatchEvent()
        at mx.rpc::AbstractService/dispatchEvent()[E:\dev\4.0.0\frameworks\projects\rpc\src\mx\rpc\A bstractService.as:333] 
        at mx.rpc.soap.mxml::WebService/dispatchEvent()[E:\dev\4.0.0\frameworks\projects\rpc\src\mx\ rpc\soap\mxml\WebService.as:267] 
        at mx.rpc::AbstractOperation/http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()[E:\dev\4.0.0\frameworks\pro jects\rpc\src\mx\rpc\AbstractOperation.as:254] 
        at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::resultHandler()[E:\dev\4.0.0\frameworks\projec ts\rpc\src\mx\rpc\AbstractInvoker.as:318] 
        at mx.rpc::Responder/result()[E:\dev\4.0.0\frameworks\projects\rpc\src\mx\rpc\Responder.as:5 6] 
        at mx.rpc::AsyncRequest/acknowledge()[E:\dev\4.0.0\frameworks\projects\rpc\src\mx\rpc\AsyncR equest.as:84] 
        at DirectHTTPMessageResponder/completeHandler()[E:\dev\4.0.0\frameworks\projects\rpc\src\mx\ messaging\channels\DirectHTTPChannel.as:446] 
        at flash.events::EventDispatcher/dispatchEventFunction() 
        at flash.events::EventDispatcher/dispatchEvent() 
        at flash.net::URLLoader/onComplete() 
    private function communicationServicesPort_resultHandler(event:ResultEvent):void{
                str = new ArrayCollection();
                if (event.token.result as ArrayCollection) { // When result contains more than one string
                    str = event.token.result as ArrayCollection;
                    if(str.length <= 15){ 
                        if(str.length<15)
                            nextLabel.enabled =false ; //  Here i am getting error for not accessing nextlabel i.e id of next button
                        else {
                            nextLabel.enabled =true ;
                        referenceDG.dataProvider = str; //Here i am getting error
                else {// When result contains single string or validation message
                    str = new ArrayCollection([event.result]);
                    if(str[0] == "NULL"){
                        str[0]= "                              Sorry! No Search Results Found... Please do search again..........          ";
                        nextLabel.enabled = false;
                    referenceDG.dataProvider = str;

    Hi,
    Thanks for ur reply,,
    I have posted u with some more code snippets .....please provide me solution ASAP
    Reference.mxml
    <s:HGroup width="1003" height="45" gap="2">
                <mx:Image id="judgements" width="98" minHeight="10" click="this.createMenu('judgements',JudgementsXMLTag)" buttonMode="true"
                          maxHeight="350" maxWidth="250" height="41" source="assets/images/ReferencesImages/JudgementsImg.jpg" left="0"/>
       </s:HGroup>
    <mx:Canvas id="datagrid" width="100%" height="100%">
                    <mx:VBox width="100%" height="100%" paddingBottom="5" paddingLeft="1" paddingRight="0"
                             paddingTop="10" verticalScrollPolicy="off" horizontalScrollPolicy="off">
                        <mx:DataGrid id="referenceDG" itemClick="openFile(event)"     //datagrid
                                     width="100%" height="100%" showHeaders="false"
                                     alternatingItemColors="[#ffffff,#ffffff]">
                            <mx:columns>
                                <mx:DataGridColumn dataField="*" fontWeight="normal" visible="false"
                                                   direction="ltr" fontGridFitType="pixel" color="#000000"
                                                   fontSize="12" fontStyle="normal" fontFamily="Verdana"
                                                   wordWrap="true" resizable="false" width="14"/>
                                <mx:DataGridColumn dataField="*" fontWeight="normal" labelFunction="SplitFunc" 
                                                   direction="ltr" fontGridFitType="pixel" color="#000000"
                                                   fontSize="12" fontStyle="normal" fontFamily="Verdana"
                                                   wordWrap="true" resizable="false" width="14"/>
                            </mx:columns>
                        </mx:DataGrid>
                        <mx:HRule width="968"/>
                        <mx:HBox horizontalAlign="right" width="968">
                            <mx:LinkButton id="prevLabel" label="Prev" fontWeight="bold" enabled="{counter>1}" click="prv_clickHandler(event)" color="#FF8800"/>  //Previous button
                            <mx:LinkButton id="nextLabel" label="Next" fontWeight="bold" click="nxt_clickHandler(event)" color="#FF8800"/>
    //Next Button
                        </mx:HBox>
                    </mx:VBox>
    </mx:Canvas>
    private function createMenu(btnName:String,xmlTag:XML):void {   //On click of judgements image
                /*reader.htmlText="";*/
                menu = new ScrollableArrowMenu();
                menu = ScrollableArrowMenu.createMenu(null,xmlTag, false);
                menu.labelField="@label";
                menu.verticalScrollPolicy =  ScrollPolicy.OFF;
                menu.arrowScrollPolicy =  ScrollPolicy.AUTO;
                menu.maxHeight=350;
                menu.maxWidth=250;
                var pt:Point = new Point(0, 40);
                    menu.addEventListener(MenuEvent.ITEM_CLICK,JudgementsMenuBar_itemClickHandler); ///menu item click event listener
                    pt = judgements.localToGlobal(pt);
                menu.show(pt.x, pt.y);
    protected function JudgementsMenuBar_itemClickHandler(event:MenuEvent):void /// On dropdown menu item click
                //Alert.show("Data under process","No Data");
                searchTxt.text ="";
                searchFlag = false;
                judgementItemLabel = null;
                var judgementItemLabel:String = null;
                judgementItemLabel = event.item.@label;
                var judgementItemLabelSplit:String = null;
                var judgementItemLabelSplitArray:Array = new Array();
                judgementItemLabelSplitArray = judgementItemLabel.split(" ");
                judgemntItemLabelAfterSplit=judgementItemLabelSplitArray[0];
                judgementsTtlWndw = PopUpManager.createPopUp(this, JudgementMenubarClickPopup, true) as JudgementMenubarClickPopup;   /// opening a pop up.... once th user enters the I/P iam dispatching the event from popup
                judgementsTtlWndw.addEventListener(ReferenceJudgementsEvent.SEARCH_CLICK_EVENT,searchButt onClickPopUp); //event listener for dispatched event from popup
                judgementsTtlWndw.judgementMess.text = " Please Enter Furthur Keywords to be Searched with respect to " + event.item.@label;
                judgementsTtlWndw.judgementitemlabelSplitPopUp.text = judgemntItemLabelAfterSplit+"btn";
                PopUpManager.centerPopUp(judgementsTtlWndw);
    private function searchButtonClickPopUp( event:ReferenceJudgementsEvent ) : void
                judgementFileDownloadString = event.judgementUserIp;
                searchButtonClick();
    public function searchButtonClick():void {
                    RefTxtInput = StringUtils.stripTags(judgementFileDownloadString);
                    judgementFileDownloadString = null;
                    searchFlag = false;
                    counter = 1;
                    getSearchEngineForReferencePageResult.token = lawPadCommunicationServicesPort.getSearchEngineForReferencePage(RefTxtInput, 15, counter);
    /////////////LawPad Search//////////////////////////
            private function lawPadCommunicationServicesPort_resultHandler(event:ResultEvent):void{
                str = new ArrayCollection();
                if (event.token.result as ArrayCollection) { // When result contains more than one string
                    str = event.token.result as ArrayCollection;
                    if(str.length <= 15){ 
                        if(str.length<15)
                            nextLabel.enabled =false ;
                        else {
                            nextLabel.enabled =true ; //error at this point
                        referenceDG.dataProvider = str; //error at this point

  • TypeError: Error #1009: Cannot access a property or method of a null object reference. at mx.controls::AdvancedDataGrid/findHeaderRenderer()

    Can anyone throw any light on this obscure Flex error?...
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at mx.controls::AdvancedDataGrid/findHeaderRenderer()[...path...\projects\datavisualisation\ src\mx\controls\AdvancedDataGrid.as:1350]
    at mx.controls::AdvancedDataGrid/mouseEventToItemRenderer()[...path...\projects\datavisualis ation\src\mx\controls\AdvancedDataGrid.as:1315]
    at mx.controls.listClasses::AdvancedListBase/mouseMoveHandler()[...path...\projects\datavisu alisation\src\mx\controls\listClasses\AdvancedListBase.as:8091]
    I found a related bug reported on Jira: https://bugs.adobe.com/jira/browse/FLEXDMV-1631
    But in our case, we have no zoom effect.  It may be timing related, as there is a lot of computation going on when this page, and the ADG is first initialised.
    Please?... Any suggestions or workarounds?  We don't want this falling over in the hands of our customers.
    <rant> And people wonder why I hate Flex!?  These obscure instabilities never happen when I develop Pure ActionScript.  The Flash platform is wonderfully stable.  But as soon as you bring Flex into play, things take longer to develop, it's a struggle to extend or change the behaviour of the bloated components, and everything falls apart as these bugs begin to surface.</rant>

    facing the same problem... sdk 4.1. no solution for about 2 years ????

  • Module Chart component Error #1009: Cannot access a property or method of a null object reference

    Is there a known bug when displaying a chart component that is defined in a module. When attempting to display a chart component defined in a module it crashes indicating Error #1009: Cannot access a property or method of a null object reference.
    It crashes at the following location in ChartBase.as. Somehow when loading the chart the  styleManager.getStyleDeclaration("mx.charts.chartClasses.ChartBase"); returns null so when using the setStyle methods the exception occurs.
    private function initStyles():Boolean
            HaloDefaults.init(styleManager);
      var chartBaseStyle:CSSStyleDeclaration = styleManager.getStyleDeclaration("mx.charts.chartClasses.ChartBase");
      chartBaseStyle.setStyle("chartSeriesStyles", HaloDefaults.chartBaseChartSeriesStyles);
      chartBaseStyle.setStyle("fill", new SolidColor(0xFFFFFF, 0));
      chartBaseStyle.setStyle("calloutStroke", new SolidColorStroke(0x888888,2));
            return true;
    Added note: There is a chart component in the application that works fine.  The only way I can get  the chart in the module to display is to add the following workaround preinitializer but it severly impacts the loading of the module. Is there a way around this.
    protected function preinitializeHandler(event:FlexEvent):void
       var styleObjects:Array = FlexGlobals.topLevelApplication.styleManager.selectors;
       for each(var styleObj:String in styleObjects)  {
        var style:CSSStyleDeclaration = FlexGlobals.topLevelApplication.styleManager.getStyleDeclaration(styleObj);
        styleManager.setStyleDeclaration(styleObj, style, true);   
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at mx.charts.chartClasses::ChartBase/initStyles()[E:\dev\4.y\frameworks\projects\charts\src\ mx\charts\chartClasses\ChartBase.as:1862]
    at mx.charts.chartClasses::ChartBase/set moduleFactory()[E:\dev\4.y\frameworks\projects\charts\src\mx\charts\chartClasses\ChartBas e.as:1894]
    at mx.charts.chartClasses::PolarChart/set moduleFactory()[E:\dev\4.y\frameworks\projects\charts\src\mx\charts\chartClasses\PolarCha rt.as:223]
    at mx.charts::PieChart/set moduleFactory()[E:\dev\4.y\frameworks\projects\charts\src\mx\charts\PieChart.as:203]
    at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()[E:\dev\4.y\frameworks\projects\spark\src\spark\components\Group.as:1590]
    at spark.components::Group/addElementAt()[E:\dev\4.y\frameworks\projects\spark\src\spark\com ponents\Group.as:1387]
    at spark.components::SkinnableContainer/addElementAt()[E:\dev\4.y\frameworks\projects\spark\ src\spark\components\SkinnableContainer.as:775]
    at mx.states::AddItems/addItemsToContentHolder()[E:\dev\4.y\frameworks\projects\framework\sr c\mx\states\AddItems.as:782]
    at mx.states::AddItems/apply()[E:\dev\4.y\frameworks\projects\framework\src\mx\states\AddIte ms.as:563]
    at mx.core::UIComponent/applyState()[E:\dev\4.y\frameworks\projects\framework\src\mx\core\UI Component.as:10741]
    at mx.core::UIComponent/commitCurrentState()[E:\dev\4.y\frameworks\projects\framework\src\mx \core\UIComponent.as:10487]
    at mx.core::UIComponent/setCurrentState()[E:\dev\4.y\frameworks\projects\framework\src\mx\co re\UIComponent.as:10323]
    at mx.core::UIComponent/set currentState()[E:\dev\4.y\frameworks\projects\framework\src\mx\core\UIComponent.as:6425]
    at BloodPressure/bloodpressureDg_selectionChangeHandler()[C:\Users\Mark\Adobe Flash Builder 4.7\BiometricsFlexProject\src\BloodPressure.mxml:311]
    at BloodPressure/__bloodpressureDg_selectionChange()[C:\Users\Mark\Adobe Flash Builder 4.7\BiometricsFlexProject\src\BloodPressure.mxml:41]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at mx.core::UIComponent/dispatchEvent()[E:\dev\4.y\frameworks\projects\framework\src\mx\core \UIComponent.as:13152]
    at spark.components::DataGrid/commitInteractiveSelection()[E:\dev\4.y\frameworks\projects\sp ark\src\spark\components\DataGrid.as:3634]
    at spark.components::DataGrid/setSelectionAnchorCaret()[E:\dev\4.y\frameworks\projects\spark \src\spark\components\DataGrid.as:4210]
    at spark.components::DataGrid/grid_mouseDownHandler()[E:\dev\4.y\frameworks\projects\spark\s rc\spark\components\DataGrid.as:4679]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at mx.core::UIComponent/dispatchEvent()[E:\dev\4.y\frameworks\projects\framework\src\mx\core \UIComponent.as:13152]
    at spark.components::Grid/dispatchGridEvent()[E:\dev\4.y\frameworks\projects\spark\src\spark \components\Grid.as:4038]
    at spark.components::Grid/grid_mouseDownDragUpHandler()[E:\dev\4.y\frameworks\projects\spark \src\spark\components\Grid.as:3883]
    at Function/<anonymous>()[E:\dev\4.y\frameworks\projects\spark\src\spark\utils\MouseEventUti l.as:84]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at mx.managers::SystemManager/mouseEventHandler()[E:\dev\4.y\frameworks\projects\framework\s rc\mx\managers\SystemManager.as:2918]

    It appears as though this error has been going on for a while. See the following link http://forums.adobe.com/thread/941849

  • I can't remember my passcode for my iPad so cannot access it?

    I cannot remember my passcode ( 4 digits ) for my iPad so cannot access it?

    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • "Site System Status Summarizer still cannot access storage object" after DB Move

    After our SCCM server was up and running, the DBAs moved the SQL Site Database to a new drive which is a supported SQL Operation according to this Support document:
    https://support.microsoft.com/en-us/kb/2709082
    Using the methods described by the above document we were able to restore functionality to SCCM but I am still seeing Informational messages in the SMS_SITE_SYSTEM_STATUS_SUMMARIZER component.
    Site System Status Summarizer still cannot access storage object "\\<SQLServer>\S$\SMS_<SQLServer>" on site system "\\<SQLServer>". The operating system reported error 67: The network name cannot be found.
    Possible cause: The site system is turned off, not connected to the network, or not functioning properly.
    Solution: Verify that the site system is turned on, connected to the network, and functioning properly.
    Possible cause: Site System Status Summarizer does not have sufficient access rights to connect to the site system and access the storage object.
    Solution: Verify that the accounts are properly configured to allow the site to connect to the site system and access the storage object.
    Possible cause: Network problems are preventing Site System Status Summarizer from connecting to the site system.
    Solution: Investigate and correct any problems on your network.
    Possible cause: You took the site system out of service and do not intend on using it as a site system any more.
    Solution: Remove the site system from the list of site systems used by this site; this list appears under Site Systems in the Configuration Manager Console.
    Possible cause: You accidentally deleted the storage object or took the storage object out of service.
    Solution: The components will eventually detect that the storage object no longer exists on the site system and will either recreate it or choose a new storage object. Monitor the status messages reported by other site components to verify that this
    occurs properly.
    The storage object has been inaccessible since "14/03/2015 1:23:20 AM". When you correct the problem and Site System Status Summarizer successfully accesses the storage object, Site System Status Summarizer will set the storage object's status
    to OK, providing that the storage object has sufficient free space.
    I have run a site reset to try and fix this but the site server still seems to be trying to access files on the old drive. Is there a method to get SCCM to start looking for these files on the NEW DB drive (H$) in my case?

    Was a site reset performed at all yet? This has to be done. 
    Torsten Meringer | http://www.mssccmfaq.de
    Yes, I tried a site reset prior to making this post. I was sure I had read that this should resolve the issue but unfortunately it seems a site reset did not resolve the issue.
    Since we are running a virtualized environment, is it possible the old drive has to still exist prior to running the site reset? If we add a small "S" drive back to the server and run the site reset again, might that help?

Maybe you are looking for