I cannot access my itunes library. It appears to be empty, which is not the case. I hesitate to sync with my ipod because everything may disappear

I cannot access my itunes library. It appears to be empty, which is not the case. I hesitate to sync with my ipod as everything my disappear.

Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

Similar Messages

  • After editing a RAW photo in PE13 (my External Editor) sent from Apple's iPhoto, I can not reimport the edited photo bank into my iPhoto library. The "Import to Library" command is greyed out. This was not the case before the latest PE13 RAW update versio

    After editing a RAW photo in PE13 (my External Editor) originally sent from Apple's iPhoto, I can not reimport the edited photo back into my iPhoto library. The
    "Import to Library" command is greyed out. This was not the case until the latest PE13 update (Camera Raw Version 8.7.1.311). What needs to be done
    to reimport edited photos back into my iPhoto library? Ideas?

    Launch PSE Expert Mode and go to:
    Photoshop Elements Editor >> Preferences >> Saving Files (tab)
    Set the drop-down dialog
    On First Save : Save Over Current File
    Click OK.
    When you have finished editing in PSE use Cmd+S to save (not Save As)

  • Cannot access my itunes library or make purchases

    Hello,
    I bought my 16GB ipod Nano in December and uploaded all my music onto it. Awhile after which my laptop was wiped. I reinstalled itunes, however, now the songs on my ipod do not appear in my itunes library and i cannot transfer purchases to it because "it is synced to another itunes library" What should i do? Your help would be very much appreciated!
    A

    1). Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod.
    2). When your iPod appears in the iTunes source list change the update setting to manual, that will let you continue to use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
    3). Once you are connected and your iPod is safely in manual mode there are a few things you can do to restore your iTunes from the iPod. iTunes will only let you copy your purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
    For everything else (music from CDs, other downloads and including iTunes purchases) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. You can read reviews and comparisons of some of them here:
    Wired News - Rescue Your Stranded Tunes
    Comparison of iPod managers
    A selection of iPod to iTunes utilities:
    TuneJack Windows Only (iPhone and iPod Touch compatible)
    SharePod Windows Only (iPhone and iPod Touch compatible)
    iPod2PC Windows Only
    iDump Windows Only
    YamiPod Mac and Windows
    iPod Music Liberator Mac & Windows
    Floola Mac & Windows
    iPodRip Mac & Windows (iPhone and iPod Touch compatible)
    iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
    Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
    iGadget Mac & Windows (iPhone and iPod Touch compatible)
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
    There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
    4). Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.
    5). I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay: Back up your iTunes library by copying to an external hard drive

  • I cannot access my iTunes library through other mac applications like iPhoto.

    Since I've updated to 10.5 I cannot access to my iTunes library through other Mac applications like for instance iPhoto.
    The application says that my itunes library is idle.
    Also my screen saver used to show my albums covers yet now it doesn't show anything but n error message attestng that my library doesn't contain any album cover.
    Can someone give me a clue since my library contains a cover for each song and is synchronizes with iTunes match?
    Thank you for ANY help!

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • HT4527 cannot access original itunes library. PC back to factory default settings

    I'm using the same Toshiba laptop which has been returned (following a fault), to factory settings. I cannot get access via itunes, to my original music library when either ipod or ipad are connected.
    I have an iPod Touch 4th gen and Apple iPad version 3.
    The iPad has my original music library and videos on it. My ipod only has purchased music as now shown on the curreny itunes library.
    How do re-trieve the original library?
    Alan (UK)

    As far as the iPod know your restored computer is a new computer/new library.  If everything that is on your iPod is in the library on your restored computer let iTunes erase you iPod and replace its contents with what is now in your iTunes library.  If you have the iPod backup from your pre-restored iPod, you can restore your iPod from that backup to get your app data and other things back.  See the following fro the location of the backup file and what is in the backup.
    iPhone and iPod touch: About backups

  • Cannot access Desktop Itunes Library from Laptop

    I have my Itunes library on my desktop pc which I access from my laptop with my ipod classic with no problems. My wife now has a 4th gen Ipod touch and i am trying to set up her laptop so she can access the same library and manage =her music via a playlist. From what I've read this should be pretty straight forward but I can't get it to work.
    The laptops are running vista and the desktop XP, all with the latest version of Itunes.
    The library was in my account on a user disk on the desktop. The system disk does not have enough room for the library (about 100 GB) so I moved it to a top level directory on the user disk. The user disl is shareable and I have ade the itunes library sharable. When I point itunes on my laptop to the new location I can access the new library. When I point my wife's itunes to the new library, itunes seens to accept it (no error message) but itunes stays on the local laptop library. On both laptops a drive is mapped to the user disk.
    Any ideas what may be going on and how to fix it. I'm assuming itunes can be open on several systems at once? I also have home sharing on.
    Thank,
    George

    Welcome to the Apple community.
    What are you doing when you get this message, are you trying to set up homesharing or trying to access your library.

  • I downloaded the latest I tunes update today. Now when I click on the itunes icon I get an arror box :R6034 and cannot access my itunes library. How can I fix this problem?

    I annot open my Itunes library ever since installing the latest version of Itunes today. I get an error "R6034." How can I fix this problem?

    Hello Steven.
    First and foremost, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
    In any case, and since you seem to be in the process of updating (you should have done so a while ago, since Firefox 2.0 has been discontinued years ago, I believe), your problems may exist because you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.
    If the problem is not disappears when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

  • How do I get my albums and pictures to match correctly? Ever since the last iPhoto update my entire library has been in disarray. i.e. my wedding album have pics from vacation album. Which was not the case before.   MacBook Pro 2010

    Ever since I did the lastest iPhoto update my picture albums have not correctly matched up with the corresponding photos. i.e. my wedding pictures now show up in my vacation album.  The picture thumbnails are not showing me the correct photos. 
    15 inch MacBook Pro Late 2010
    iPhone 4

    I have iPhoto '11 with the lastest software update. I forgot what number it currently is. I am vigalant when it comes to the latest software updates. Yes, I did restore my iPhoto pictures from a backup since I founf out I could not share any of my pics using my apeture library since they were not the orginals. So, after the back-up of iPhoto all my pictures albums and the pics in the album do not match up, even the thumbnails.  I find this quite annoying. All my albums were working and correctly before this update.  As for apeture can I re-master all the photos there masters? so i can just do away with using iPhoto all together?
    Thanks for the quick reply!

  • When I tried to log into my itunes account, I was asked to update my credit card information. When I confirmed my credit card info, I got a response about my security code not being accurate -which is not the case-it is 100% accurate. How do I fix?

    I keep getting a message about my security code not being accurate. I tried 3 different cards & have the same issue. Is this a systems issue? I need to get my apps installed on my new iPhone 4. I am unable to download without confirming my credit card info- My security codes are 100% accurate.Anyone else having this issue? What is the fix for this?

    Ohemod,
    There are 120+ countries that have iTunes Stores, but that leaves many that do not.  You can consult this document:  iTunes Store: Which types of items can I buy in my country?
    Opening in a new country requires a tremendous amount of legal, commercial and financial investment, but I am sure Apple would be interested in knowing where there is unmet demand.  If you wish to make suggestions to Apple, you can use the iTunes Feedback page.

  • I cannot send mail, username or password are incorrect. This is however not. the case

    How can i get. my iPad to send mail again? I get the message that username or password are incorrect, but that is not.

    When does the message appear?  Is it when you are in the email client?  If so, go to Settings>icloud and be sure you are logged into the right icloud account.
    Go to Settings>Mail, Contacts, Calendars - and in the Mail section, be sure your email account is defined.  If it is, try deleting it and setting it up again.

  • Can not access my itunes library

    I have a new lap top and i cannot access my itunes library..I can buy new music on itunes but my entire library is gone..Where can i ac
    cess this???

    Happy to help you :) go to seeing and than general or settings than iTunes store it's for sure in settings but you may want to set it up on your computer in which case it's (windows) edit > preferences (Mac) iTunes preferences

  • Cannot access my music library or movie rentals on Apple TV

    I am trying to set up my new Apple TV and home sharing is on, I can use photo stream to see my photos but cannot access my iTunes library, no music, no movie rentals. Please help I only have 1 day before my movie rental expires

    Unless you rented the movies on ATV I do not think you can watch them on ATV.  Where are you looking for your content?  i.e.  Are you looking under Music or under Computers > Music.

  • When I plug in my Ipod touch to my computer a warning appears "The program cant start because MSVCR80.dll is missing."  I can not access my Itunes library.  Also, an "error 7 Windows error 126" appears as well.  Any ideas?

    When I plug in my Ipod Touch to my computer I can not access my Itunes library.  The following message appears "The program cant start because MSVCR80.dll is missing."  Also, another message appears as well - "Error 7  Windows error 126" as well as APSDaemon.exe.
    I have NO IDEA what the heck to do.
    Any ideas?
    Thanks!

    Issues installing iTunes or QuickTime for Windows
    solving MSVCR80
    iTunes 11.1.4 for Windows: Unable to install or open
    Troubleshooting issues with iTunes for Windows updates

  • I bought a new laptop and can access my itunes library but when i try to add purchased playlist songs to my ipod message appears asking if I'm ok with erasing all other songs on the ipod. Help needed.

    I bought a new laptop and can access my itunes library but when i try to add purchased playlist songs to my ipod message appears asking if I'm ok with erasing all other songs on the ipod. How do I add purchased playlist to ipod without erasing existing ipod playlists?

    cujoftw wrote:
    wow ... I get a headache just trying to read what you just said. I went and read how to migrate my library and found that you can only migrate purchased media.
    No, you can easily migrate your entire library from one working compter to another.
    If you fail to backup or migrate your library and find yourself with nothing but a new empty computer and a device full of content iTunes is designed to only recover the iTunes purchased content, however third party tools can help recover everything if needed.
    tt2

  • When i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version.  What to do?

    when i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version.  What to do?

    Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
    Troubleshooting iTunes installation on Mac OS X

Maybe you are looking for

  • Satellite A300D-15B - Switched off and charging issue

    Hi I have a Satellite A300D-15B, running Windows 7 32bit, which bought quite recently used. I have encountered a couple of problems which I hope someone can help me with! Firstly, the day I got the machine, it switched suddenly, but turned back on im

  • How can I get the workspace login name in a custom jsp?

    I want to add a custom jsp in workspace, how can I pass the login name to this jsp?

  • Unable to connect using SMB in finder to iPhone

    i am running 10.6.2, i can connect in finder using afp://xxx.xxx.x.x to my iphone logging in using root and password however, when i try smb://xxx.xxx.x.x, i get this error connection failed: there was an error connectiong to the server "xxx.xxx.x.x"

  • OpenOffice CALC in DIAdem

    HI  I am trying to write data to open Office Calc from DIadem using activex (OOCALCVB.dll). i can able to open openoffice calc application,Add new worksheet and rename the worksheet using Diadem script. but i can't able write data to specific cell.  

  • Problem during updating batch master

    Hi All, I am facing problem during batch updation. There is one RF program for creation of goods movement. After material document is created the batch needs to be updated. I have called BAPI_BATCH_CHANGE for updating country of origin, vendor batch