I cannot access my pictures when i connect my storm to my pc.

I cannot access my pictures when i connect my storm to my pc.
It just stoped showing me them all of a sudden. Anyone know why or how to fix it?

Hi there!
Since you say this started "all of a sudden" -- Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

HT4623 I updated my iPhone 4s and cannot access Passbook. When I click on App Store, I get the following message "cannot connect to iTunes Store." How do I correct this?

I updated my iPhone 4s and cannot access Passbook. When I click on App Store, I get the following message: "cannot connect to iTunes Store." How do I correct this problem?

That's because there are not enough apps that use Passbook yet. Wait.

TS3694 my i pad is showing connect to i tunes picture when i connect to i tunes it tells me i need to restore, but when i do it keeps coming up with error code!! which is a different one each time can anyone offer some advise to solve this frustrating pro

my i pad is showing connect to i tunes picture when i connect to i tunes it tells me i need to restore to factory settings, but when i do it keeps coming up with error code!! which is a different one each time can anyone offer some advise to solve this frustrating problem.

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

I cannot access the pictures on my iPhone from my PC anymore?

For some reason I can no longer access the pictures on my iPhone from my WIndows PC. I used to be able to navigate us explorer to the files and download them to my desktop. A possibly related glitch is that when I connect the iPhone with the cable via the USB port windows says it's recognized and properly installed the device drive...however the device does not apeear under "My Computer" the device show up on iTunes on the PC but I cannot navigate to the picture. Can someone please help me?
Thank you,

Thanks for update.
Can you look into the bottom dock connector, and clean it with jet of air, also look if any pins/wire is not straight. My suspicion is that, the USB interface signal pins, 25 and 27, D- and D+, is not communicating with the iPod, especially pin 25.
If cleaning doesn't work, then bring it to any 3rd Party iPod Repair, to let them have a look or replace the bottom dock or whatever they find out of place.
Oops sorry, I forgot the basic
Can you Reset the iPod.
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/

Afterupdating to firefox4 cannot access webpages and when I try the system hangs and only clears with reboot but access is ok with internet explorer

have tried uninstalling and then re installing but no joy. when I open firefox I can search as normal but as soon as I click on a site to open a page the screen freezes and I cannot access any other programs either

Leigh...
but cannot do this because I cannot access Mac App Store
If you can't access the App Store from the Apple menu, Dock, or Applications folder installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you.
It's ok to do this even you are already running v10.6.8.
Plants vs. Zombies, and that is all for additional software on here
FYI: Some third party software can cause issues with the App Store > Mac App Store: Sign in sheet does not appear, or does not accept typed text
Apple is not responsible for incompatibility isssues with third party software.

No access to songs when not connected to wifi....

I'm using iTunes Match. When not connected to wifi, I don't have access to all songs on iPhone or iPad. How do I fix this?

Hello Jim,
Thanks for the reply! I knew I could download the songs and have them permanently on my devices. I subscribed to Match with the understanding that I could access all songs that I've ripped from CDs on any device at any time. As it stands now, I can only listen to a handful of songs. When not connected to wifi most song titles appear lighter. Those are the ones I can't play when not connected to wifi. Songs I can play are listed in bold. Any idea what's going on here?
Thanks!

Cannot access itunes store? network connection?

Out of nowhere I cannot access itunes store due to error message "itunes could not connect to itunes store. The network connection timed out."
New ipod touch has been recently added for a total of 2 devices. Itunes store has worked perfectly last three days. Help!
Message was edited by: eornom4

HI EVERYONE!!!
I have a new Nano, and for the past few days I have no been able to connect to the iTunes sztore. The message on the screen says I have to check my network connections and try again. Last successful sign in was 18th Dec.
Any help or tips much appreciated
Thanks

Cannot access internal LAN after VPN connect

I know this is either an ACL or NAT issue that I cannot figure out. The nat-t config in defaulted in the IOS config for the ASA. I actually forgot the command to show the hidden default config lines. Either way, can someone take a look at my config, and let me know what I am doing wrong, again.
Thanks ahead of time.
ASA Version 8.2(2)
hostname ciscousa
enable password
names
interface Vlan1
nameif inside
security-level 100
ip address 1.1.1.2 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 14.14.11.5 255.255.255.0
interface Vlan3
shutdown
no forward interface Vlan2
nameif dmz
security-level 50
ip address dhcp
interface Ethernet0/0
switchport access vlan 2
speed 100
duplex full
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
speed 100
duplex full
ftp mode passive
same-security-traffic permit intra-interface
access-list outside_in extended permit icmp any any
access-list inside_nat0 extended permit ip any 1.1.1.0 255.255.255.0
access-list inside_nat0 extended permit ip any 10.12.27.0 255.255.255.0
access-list split_tunnel standard permit 1.1.1.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
ip local pool vpnpool 10.12.27.100-10.12.27.120 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0
nat (inside) 1 0.0.0.0 0.0.0.0
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 14.14.11.6 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 1.1.1.0 255.255.255.0 inside
http 1.1.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map inet-1_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map inet-1_map 65535 ipsec-isakmp dynamic inet-1_dyn_map
crypto map inet-1_map interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
management-access inside
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy vpnipsec internal
group-policy vpnipsec attributes
wins-server value 1.1.1.16
dns-server value 1.1.1.16
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split_tunnel
default-domain value company.com
tunnel-group vpnipsec type remote-access
tunnel-group vpnipsec general-attributes
address-pool vpnpool
default-group-policy vpnipsec
tunnel-group vpnipsec ipsec-attributes
pre-shared-key *****
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512

Hello,
I have been trying to get this to work within the last week but to no avail. I changed my config altogether and started from scratch. I have Split Tunnel working well, and I can access the VPN client from the internal LAN. But I still cannot access the internal LAN from the VPN client host. Can anyone take a look at my config and tell me what ACL\Access Group I am missing. I know I am close but I cannot get over the hump.
Thanks!
ASA Version 8.2(2)
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.2 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address xxx.xxx.xxx.xxx 255.255.255.0
interface Vlan3
shutdown
no forward interface Vlan2
nameif dmz
security-level 50
ip address dhcp
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
speed 100
duplex full
interface Ethernet0/4
interface Ethernet0/5
switchport access vlan 3
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list outside_in extended permit icmp any any
access-list outside_in_vpn extended permit ip 192.168.3.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.0.0 192.168.0.0 255.255.0.0
access-list split_tunnel standard permit 192.168.0.0 255.255.0.0
access-list split_tunnel standard permit 192.168.1.0 255.255.255.0
access-list inside_access_in extended permit ip any any
access-list outside_access_in extended permit ip any any
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
ip local pool ipvpn 192.168.3.100-192.168.3.200 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
access-group inside_access_in in interface inside
access-group outside_in in interface outside control-plane
access-group outside_in_vpn in interface outside
route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xx 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map internet-1_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHAESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map internet-1_map 65535 ipsec-isakmp dynamic internet-1_dyn_map
crypto map internet-1_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto isakmp identity address
crypto isakmp enable inside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
management-access inside
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DfltGrpPolicy attributes
group-policy vpnipsec internal
group-policy vpnipsec attributes
wins-server value 192.168.1.5
dns-server value 192.168.1.5
split-tunnel-policy tunnelall
split-tunnel-network-list value split_tunnel
default-domain value company.com
tunnel-group vpnipsec type remote-access
tunnel-group vpnipsec general-attributes
address-pool ipvpn
default-group-policy vpnipsec
tunnel-group vpnipsec ipsec-attributes
pre-shared-key *
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
prompt hostname context
Cryptochecksum:7e41045c9d7c66ac2c03c3b12ae63908

Mac KeyChain Access App Hangs when NOT connected to WiFi

Hi,
I am facing a problem with Keychain Access hanging and wifi connection in OS X 10.9.1 (Mavericks).
I use a Time Capsule as a base station and 13" Macbook Air (2012). The base station is connected to the internet through a PPOE connection.
Here are the details.
Since upgrading to OS X 10.9.1, my Mac automatically connects to preferred wifi network ONLY WHEN the wifi is available at start up or when the Mac wakes up from sleep, but not otherwise.
Before the upgrade, the Mac automatically connected to the preferred wifi network not just at start up, but whenever the wifi became available.
In other words, after the upgrade, if I boot up the Time Capsule base station and the Mac simultaneously, the Mac scans for the base station wifi network (this is configured as the top preferred wifi network) at start up, but since the base staion is still booting up, the Mac doesn't find the wifi.
But once the base station has booted up and wifi is available, the Mac no longer bothers to join it.
At this point, if I click on the Keychain Access application, IT HANGS (I see a rainbow-colored rotating disc/ball). And it continues to hang UNLESS I do ONE of the following to get the Mac connected to the wifi.
1. I manually select the preferred wifi network using the wifi icon at the top of the screen; OR
2. I put the Mac to sleep (by closing the cover) and then wake it up. On wake up, it connects automatically to the preferred wifi network; OR
3. I turn off the wifi (using the wifi icon on the top) and turn it back on, at which point, the Mac automatically connects to the preferred wifi network.
As soon as the Mac gets connected to the WiFi, the Keychain Access application STOPS hanging and open up normally.
I also noticed that Keychain Access DOESN'T HANG (even if the Mac is not connected to the wifi), if I do the following:
1. Go to Network preferences;
2. Uncheck "Ask to join new networks";
3. Click on the "Advanced" button, select wifi tab, and remove all preferred wifi networks and uncheck "Remember networks this computer has joined".
I obviously want to set preferred wif networks, so the above workaround to avoid Keychain Access hanging is not acceptable.
I have tried everything possible including contacting Apple support, but so far the issue is still unresolved.
Appreciate any help you can provide.
Prem

There was a hotfix for this put out just after V25.
Unfortunetly you have to rebuild your viewer and submit and update to Apple. From my experience they were very quick about approving the update because of the critical nature of the update even without putting in an expediated review request, but that was over a month ago.

I cannot access the external hard drive connected to my time capsule via wifi

I have two external hard drives (a WD mybook and an older Seagate, both HFS+ formatted) connected via a USB hub to my time capsule (which is also my wifi router).
Here's the funny thing: If I a connect my mac mini to the time capsule via an ethernet cable, both disks show up as normal in Finder - along with 'Data' under Time Capsule under Shared.
But if I disconnect the ethernet cable and connect to the router via wifi, there's no sign at all of the two disks - not in Finder, and not under 'Disks' in the Airport Utility.
Anyone out there with a solution?!

Hi William, and thanks for replying.
I do have a guest network set up (for exactly that reason that guests don't get access to shared disks) but am definitely not connected to it.
So sadly it has to be something else.

I cannot see my pictures when the grid is on only an hour glass

I am unablke to see my pictures ( only the hourglass whenI see the grid of pictures. If I click on one hourglass the picture will open, but that is not acceptable.

When you click Write and open the new message editor, press Alt to show the Menu Bar, then enable all the toolbars under View/Toolbars. Plus, press F9 to show the Contacts sidebar.

Cannot synch my ipod.when i connect it and hit synch i get a message saying file folder cannot be found or does not recognize ipod. Any ideas?

cannot synch my ipod classic. when i try to i get a message saying "file folder cannot be found" or ipod is not recognized. Anybody have any ideas or fixes for this?

Mine is doing the same thing, I have been seeing it happen to a lot of people lately. Maybe it's the company sent out a bug to crash old Ipod, so we would have to buy new ones.

Cannot access yahoo mail when using foxfire, IE works OK HELP

When on the YAHOO page and I want to access my mail I get an error message with Foxfire, BUT NOT with IE

Thanks but I still have the problem. I have no problem using IE to access Yahoo mail, but it just does not work with FireFox. At work I have a T1 line so I know the internet is not the problem. I do not have any problem with FireFox at home on my personal computer. This was a not a problem 1.5 weeks ago.

Cannot Access SQL Server When Internet Down

Dear All,
I have a problem about connect to sql server.
I can't connect to sql server when my internet down.
The server in one network with my PC. I connect to the server with local IP.
Server IP 172.1.2.1 and my ip 172.1.2.25. I connect with windows Authentication.
When internet down, i can't connect to sql server using windows authentication but still work with sql server authentication.
What must i do to fix this problem?
i want connect sql server using windows authentication with or without internet connection.
Best regards,
Surbakti

Hello,
If you have the Named Pipes protocol enable, you can use (local) or the dot “.” as instance name,
instead of the IP or the name of the computer.
http://technet.microsoft.com/en-us/library/ms191294.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Cannot access anonymous resources when my user is logged in

Dear reader,
I've build an JDBC Realm with Jaas on weblogic 8.1.
So when I'm logged into the application, I can access to the ressources I've protected
with that role. But when I'm trying to access ressources (beans, sites) that are
not protected, the realm stops me saying that I've not the Role anonymous.
so what did I wrong?
sincerly
gabriel

Not that I am aware of. Data could be lost if someone is in the middle of work and the Mac shuts down without giving the user and opportunity to save the work.
Why do you want to do this? Why not just leave the Mac on all the time? Are you trying to force your kids off the Mac at a predetermined time?

I cannot access my pictures when i connect my storm to my pc.

Similar Messages

Maybe you are looking for