I cannot access my router's web configuration interface since Firefox 4. It does not let me enter a password with the username blank (as specified by the router manufacturer). Is there a workaround for this?

since updating to Firefox 4, I cannot access my router's configuration page (http://192.168.x.x). When prompted for the username and password,Firefox's log in window does not accept a blank username field (The router does not require a username, only a password, and it's the default password). If I click OK, the password entry just comes up again. This works fine in other browsers. Is there anything I can do about this?

I had this issue, too, and fixed it by turning off the option "Tell Websites I do not want to be tracked" under Options->Advanced->Browsing.

Similar Messages

  • I don't like itunes 10 and so I'm using itunes 9. However, now my phone can't connect to itunes because it says it requires itunes 10.5 or later.  Is there a workaround for this?

    I don't like itunes 10 and so I'm using itunes 9. However, now my phone can't connect to itunes because it says it requires itunes 10.5 or later.  Is there a workaround for this?

    No.
    If you don't want to update to the supported software you can't use the device.

  • 10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will i have to continue using the previous version to complete older projects?

    Final Cut Pro X 10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will I have to continue using the previous version to complete older projects? the only foreseeable solution is to begin any new projects on 10.2 or importing footage on 10.2 and starting form scratch--which is something i definitely don't want to do or have time to do. ANY advice, thoughts, or opinions would be greatly appreciated! Thank you!
    Running 10.10.3 // MacBook Pro (Retina, 15-inch, Early 2013) // 2.4 GHz Intel Core i7 // 8 GB 1600 MHz DDR3

    Exactly the same problem with me.
    Some other threads advice to remove fonts, clean the caches, remove add ins but nothing works consistenty, for some it looks like it works, for me it failed.
    What I did not try yet, was to move the Render files out of the malicious library to trash.

  • How can I backup my iphone 4 using iTunes 9.1.1? Is there a workaround for this?

    How can I backup my iphone 4 using iTunes 9.1.1? Is there a workaround for this? I need to backup my phone for replacement but it tells me I need 10.1 or later. All software is up to date, Operating system is 10.4.11. Thanks!

    No sorry. You need to upgrade to v10.5 Leopard (minimum) in order to sync an iPhone 4.
    iPhone minimum requirements:
    Mac computer with USB 2.0 port
    Mac OS X v10.5.8 or later
    iTunes 10.1 or later
    iTunes Store account
    Internet access
    You can upgrade to Leopard if your Mac meets v10.5 requirements.
    Requirements for Mac OS X v10.5
    If your Mac is Intel, you can upgrade directly to Snow Leopard if your Mac meets 10.6 Snow Leopard - Technical Specifications

  • 3g phone ringer all the way up but very faint, all sounds are very faint or none at all.  Even the click when turning off is bearly audible.  Is there a fix for this?

    My phone volume has almost disappeared.  Screen clicks, ringer all of it is bearly audible, sometimes not at all.  Everything is on, ringer volume turned all the way up.  Is there a fix for this on the iphone 3G?

    I am simply lookig for some help not an argument.  I am not an RF specialist however have setup a few wireless networks in my tenure at Wynn Resorts.  I fully agree that wireless networking is an art and a science however the powers that be in Network Land have toughted wireless networking is the easiest and quickest way to get two computers to talk with one another.  As I previously said I have already turned one (1) MBP in for this problem and Apple decided to replace it because they could not fix the problem with my particular MBP.  This MBP was running Leopard when the problems started
    I am having a hard time believeing that there are several other devicces in my home that depend on a wireless network to operate and my MBP is the only one having an issue.  I took this a step further and decided to see what would happen if I tried to connect wirelessly via Fusion.  In Windows 7 I am able to print and scan to my hearts content without any issues.  I am able to browse the internet as much as I want.  I close Fusion and try to connect to my printer via wireless and nothing.
    In order to get Apple to help do I need to get a Network Analyzer and capture packets when I have these problems?  Out of the 1000 + posts is there a consolidation of which answer is the best?  BTW I am accessing the internet via a wireless connection using Fusion and Windows 7.
    In response to Linc's comments, I will look at the router specifications however I did not qualify that these devices are not using the wireless connection at the same time.  Right now I would guess there are maybe two (2) or three (3) at the most that are actively transmitting / receiving information. --  Thanks

  • I transfered a picture folder to my tc and now it occupies space on the tc but I can't open it. I there a solution for this?

    I transfered a picture folder to my Time Capsule (3Gbit) from a external USB, drive thru my Macbook Pro, and now it occupies space on the Time Capsule  but I can't open it. Is there a solution for this?

    This is super fun with Yosemite.. that cannot open files on network drives..
    Have you got the drive mounted in Finder?
    Try and change the permissions of the folder in TC.. but I am not sure you are going to find this easy.
    I think the best way to fix this is to copy the whole lot back to the external USB via the terminal using a full root login.
    So open terminal.. type sudo su
    Type in your main administrator password.
    Then you can use any of the command line copy tools.. I have just done this with rsync..
    The command is rsync -av /source/* /destination/
    You should mount both the source and destination in finder.. and you can then drag the folder into the command line.. it will then copy the exact source and destination you want.

  • TS3581 iOS 6.1 update - iPhone will no longer connect/pair with my car.  Is there a workaround for this issue?

    After the 6.1 update my iPhone 4S will no longer connect with my car stereo (2012 Chevy Sonic).  Until update, everything was working fine and I experienced no such issues.  I have tried deleting my phone from my stereo memory and re-pairing, but I get a pair unsuccessful error on my iPhone; I have been able to pair a pre-6.1 iPhone successfully after discovering the problem.  Has anyone found a workaround to this issue?

    IIRC updating the iPhone iOS changes its characteristics when viewed by vehicle
    bluetooth
    That is why you need to remove pairing from both ends and start again
    Vehicle just does not recognise the iPhone as the one it previously paired with

  • I am using Mail with OS 10.9.1...I used to be able to drag and drop contact addresses from my address book to an e-mail header.  Now I have to type all the names and can't drag and drop.  Is there a setting for this?  Thanks!

    I am using Mail with OS 10.9.1.  I used to be able drag and drop names from my address book into the address header, but can no longer do that.  I now have to type each name in.  Does anyone know if there is a setting for this or is it a feature of the updated software?  Thanks for any info!

    Yes, that appears how Mavericks works right now. However, you can open the Address Panel, select all your contacts, then click the To (or CC, or Bcc) buttons to move the selection to the address field.
    If it is not already in the Toolbar, right-click on the Toolbar and select Customize Toolbar…
    Then, drag the address panel up to wherever you want it.
    You may also want to add it to the New Message window in the same way.

  • Browsing Apps on App Store and selecting 1 and returning starts the App list at 1.  Is there a workaround for this?

    It seems that everytime Apple releases an update to IOS, the App Store behaves differently!  My iPad 1 is currently at 4.3.3 and nearly everytime I select an app in the app store to read about, when I return, I'm back at #1.  This has become an issue since I'm trying to browse through all of the apps in certain categories for a pilot project we're doing at my middle school.
    Thanks for your help,
    Mikeca55
    iMac2011, iPad, iPod Touch, Windows XP

    A number of people have reported the same 'feature' of the store. Apart from leaving feedback for Apple I'm not sure that there is much that you can do : http://www.apple.com/feedback/ipad.html
    You could try looking at them on a browser : http://itunes.apple.com/us/genre/mobile-software-applications/id36?mt=8

  • When I attempt to add plugins, I get a message that says the plug in is not compatible with v8.0, is there a workaround for this?

    when attempting to install calendar plug in clock plug in, I am getting an error message that says not compatible with v8.0. even when I filter by versions compatible with v8.0 this message comes up.

    Is that a plug-in or an extension, where are you installing it from (title, and url please).

  • I just switched to iTunes 11.0.4. Is there a workaround for this sorting problem?

    Four bug fixes in, how can iTunes still not be displaying movies properly? When I look at the movies in my playlist in Grid View (sort by Title), the movies display at random. Plus, what does "Title" mean? There's no "title" listing in the Get Info.
    I'm about to switch back to iTunes 10, but I thought I'd post this in case there's a reason iTunes 11 is acting the way it is.

    Hi,
    Had not noticed this before! In Sort you can Sort by Tile but as you say you don"t have "Title' when you look at Get Info.
    This is appears to be a wrong labelling issue - "Title" is really "Name".
    Jim

  • Is there a workaround for this 3D features greyed out

    NVIDIA GeForce 9400M:
      Chipset Model:          NVIDIA GeForce 9400M
      Type:          GPU
      Bus:          PCI
      VRAM (Total):          256 MB
      Vendor:          NVIDIA (0x10de)
      Device ID:          0x0863
      Revision ID:          0x00b1
      ROM Revision:          3448
      gMux Version:          1.8.8
      Displays:
    Color LCD:
      Display Type:          LCD
      Resolution:          1440 x 900
      Pixel Depth:          32-Bit Color (ARGB8888)
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Built-In:          Yes
    3D features require a minimum of 512MB of vRAM. Photoshop has detected less than that on your system.
    Updating the driver of your graphics card may resolve the issue.
    For more information, visit:
    http://www.adobe.com/go/photoshop_gpu_cc_en

    No dice. That card/ chipset is hopelessly out of date.
    Mylenium

  • The ipod touch 5.1 software is rebooting constantly, is there a solution for this, the ipod touch 5.1 software is rebooting constantly, is there a solution for this

    My new ipod touch (software 5.1) is rebooting constantly, white display problems, stuck problems, it is new, do you have a solution? is it software or hardware? I have visited you tube and I am surprised about a lot of problems like this

    If you can't turn it off, then let the battery fully drain. After charging for at least an hour, tyrb a reset and restore. If it continue to reboot then time for an appointment at the Genius Bar of an Apple store.

  • I am using a Microsoft Natural keyboard and when i use the close button on Ver. 5.0 or newer it closes the whole screen not just the active tab is there a fix for this

    I am using a Microsoft Natural 4000 Keyboard
    IF I update to Mozila 5.0 when i use the close button it shuts down the whole browser nut just the active tab
    Is there a workaround for this because I like the close button feature

    Could you try disabling graphics hardware acceleration? (I'm having trouble determining from your "More system information" whether it's enabled or disabled.) Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You usually need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    orange Firefox button ''or'' classic Tools menu > Options > Advanced
    On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
    If you restart Firefox, is the issue resolved?

  • When I use my iPhone 4 my cheek hits the mute/speaker buttons is there a fix for this?

    When I am on calls with my iPhone 4 which I just purchased at full price ---- my cheeck hits the mute and/or speaker button....is there a fix for this without taking phone apart?

    If the iPhone is new and you take it apart, kiss the warranty goodbye.
    Are you using a case that may be blocking or partially blocking the iPhone's proximity sensor? If you are using a case, remove the case before the next call to see if the same occurs without the case. If not, get another case.

Maybe you are looking for