I cannot access the various radio stations in iTunes on my iPad

I cannot access the various radio stations in iTunes on my ipad2

So, If you want to listen to a station you love from itunes, check the info for the station in iTunes. Highlight the station and look in the File menu for "Get Info," (Ctrl+I is the keyflick in most systems). At the bottom of the summary page is an item "Where" which lists the URL for the station.
Grab your iOS device, start up a browser and enter the URL into the address window. You'll be streaming that station in no time, without adding another app!
A little less user friendly than native to iTunes, but you don't have to search for new stations this way.
I hope this helps!

Similar Messages

  • I cannot access the recently added folder in Instagram on my iPad.  Any ideas why?

    when trying to access photos  on my iPad in Instagram I can access my shared photo streams but not the recently added folder and the photos taken on my iPhone.  Any ideas?

    Hello wintergreenchip,
    The troubleshooting steps detailed below can help get your Photo Stream working correctly.
    Your device will keep up to 1000 photos, even if they're older than 30 days. Photos older than 30 days are removed from the iCloud server, so your devices might not have the same photos, depending on when you enabled My Photo Stream. Due to storage limitations, your Apple TV might display only your most recent photos.
    If you want to have the most current photos in My Photo Stream on each of your devices and delete the older photos:
    If there are any photos in My Photo Stream that you want to keep, save them to your Camera Roll, then back up your Camera Roll and other data using iCloud or iTunes.
    Turn My Photo Stream off in Settings > iCloud > Photos (or Photo Stream in iOS 6).
    Confirm that you wish to Delete Photos.
    Turn My Photo Stream back on. iCloud will automatically push your stored photos to your device.
    Repeat these steps for each device.
    iCloud: Get help using My Photo Stream
    http://support.apple.com/kb/TS3989
    Cheers,
    Allen

  • Where did the internet radio stations go?

    I can't find the internet radio stations in iTunes anymore.  How do I navigate to them?  Is it best just to switch over to hear them on windowsmedia.com?

  • Where is the Holiday Radio Station?

    The last few years, there was a category for 'Holiday' on the steaming radio stations via iTunes. Where is it this year?
    On a side note, is anyone having problems with Pandora on their G5 Mac running Safari?

    Sorry for the double post, but if you were a fan (like me) of Big R Radio - Christmas Classics, here's the URL. Just copy and paste this in your iTunes under Advanced>Open Audio Stream. It will then place the channel in your Music library (no idea how long that lasts for):
    http://pri.kts-af.net/redir/index.pls?esid=05d095e81a3dddc813f4b51f89bf708d&urlno=1&clientid=7&uid=68efed4d03ec7e45fd3978262c107180&clicksrc=xml

  • I have already downloaded the ios 7 but cannot access the iTunes Radio from the music app. There is no iTunes Radio icon at all! How did that happen? How can I resolve the problem? Please help. Thanks!

    I have already downloaded the ios 7 but cannot access the iTunes Radio from the music app. There is no iTunes Radio icon at all! How did that happen? How can I resolve the problem? Please help. Thanks!

    It didn't show up in my music app for several hours.   Don't know why... But it's there.
    I can now access and add stations through the iTunes Store to play through music app icon.

  • HT1218 After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer.  We still have wifi but cannot access the base station software.

    After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer.  We still have wifi but cannot access the base station software.

    Thanks for the reply. I appreciate the response. I tried that approach this evening and it didn't work for me. (Technically it worked for me, when I was hardwired into my base station, but would not work for me wirelessly, which is my main issue.)
    Again, using the approach you recommended works only if I have my ethernet cable attached to the LAN port so my computer is communicating directly to the base station through the hard wire. I am able to scan for my base station and make setting adjustments normally this way too.
    As soon as I disconnect from the LAN port and try to go wireless is where I run into problems. The Base Station's wireless network I created is available to choose in the top right corner of the monitor with all of the other available wireless devices/networks -- but the network I created does not have access to the internet. I am also unable to configure my Base Station wirelessly. When my Airport Utility tries to scan for the Base Station and Network, it cannot find any Apple Wireless Device. It's like the Wireless Network in my base station is not sending out a signal.
    Is there a way to resolve this issue?

  • Updated player and now cannot listen to internet radio stations - why ?

    Updated to 14.0.0.145 the other day and now cannot listen to internet radio stations that worked fine before updating ( WABC , WMAL , KSFO ) . Programs won't download . WMAL's podcast does work , though . No trouble with Youtube , etc...
    I have Windows 7 and IE 10 .
    Can anybody help ?
    Thanks in advance .

    Each updated version of Flash Player includes important security updates.  You really want to be running the latest version of Flash Player.
    I'm also able to play these streams with no problem.  Have you rebooted since you upgraded?  It's always a good first step for mysterious problems. 
    If that doesn't work, I'd Uninstall Flash Player | Windows and then do a fresh install from http://get.adobe.com/flashplayer before considering downgrading.  That's an unwise course of action.

  • How to stream talk radio on iTunes 12.  Was able to do so on iTunes 11, but can't find the radio stations on iTunes 12.

    Just upgraded to iTunes 12 - and now cannot stream local radio stations on iTunes.  I've looked under the RADIO section but the upgrade deleted my stations.  When I try to ADD a radio station - the iTunes 12 Search doesn't find it...  I was able to find and stream this same radio station with iTunes 11.  The iTunes 12 upgrade wiped out my history and radio stations.  Has anyone figured out how to add back individual radio stations?

    Hey bbhillfarm,
    Thanks for the question. I understand that you are having trouble finding the Internet Radio section of the new iTunes 12. The following resource should point you in the correct direction:
    Listen to Internet radio - iTunes Help
    http://help.apple.com/itunes/mac/12/#/itns2946
    Tune in to Internet stations
    1. Click the Internet Radio button   near the top left of the iTunes window (if you don’t see it, click ).
    2. To see the available stations, click the triangle next to the type of music you want to listen to.
    3. To tune in, double-click a station.
    If you use a dial-up modem to connect to the Internet, choose a station with a bit rate of less than 48 kilobits per second (kbps) for best results. To see a station’s bit rate, select the station, then choose File > Get Info.
    Thanks,
    Matt M.

  • Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

    Hi,
    starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
    a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
    We figured out a workaround though: The applications run fine when launching from a FQDN share (like
    \\share.domain.Company.com) and only cause problems when running from
    \\share directly. They have worked fine for years without FQDN though.
    Any ideas?
    Error Details (the Kind of error differs greatly):
    # 1 #
    Log Name: Application
    Source: Application Error
    Date: ...
    Event ID: 1005
    Task Category: (100)
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: vmDEV
    Description:
    Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
    because of this error.
    Program: XYZ
    File:
    The error value is listed in the Additional Data section.
    User Action
    1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
    2. If the file still cannot be accessed and
    - It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
    - It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
    3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
    4. If the problem persists, restore the file from a backup copy.
    5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
    Additional data
    Error value: C000020C [ also seen with code C00000C4]
    #2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
    Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
    Ausnahmecode: 0xc0000006
    Fehleroffset: 0x00026549
    ID des fehlerhaften Prozesses: 0x13ac
    Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
    Pfad der fehlerhaften Anwendung: \\share\application.exe
    Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
    Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
    Anwendung: XYZ.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
    Stapel:
    # 3 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
       bei System.Windows.Forms.Control.NotifyEnter()
       bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
    # 4 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei System.IO.UnmanagedMemoryStream.ReadByte()
       bei System.IO.BinaryReader.ReadByte()
       bei System.IO.BinaryReader.Read7BitEncodedInt()
       bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
       bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
       bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
       bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
    # 5 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei System.Reflection.RuntimeParameterInfo.get_Name()
       bei System.Diagnostics.StackTrace.ToString(TraceFormat)
       bei System.Environment.GetStackTrace(System.Exception, Boolean)
       bei System.Exception.GetStackTrace(Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString()
    # 6 #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
    Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
    Ausnahmecode: 0xe0434352
    Fehleroffset: 0x00012f71
    ID des fehlerhaften Prozesses: 0xa68
    Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
    Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
    Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
    Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
    # 7 #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
    Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
    Ausnahmecode: 0xc0000006
    Fehleroffset: 0x0006db27
    ID des fehlerhaften Prozesses: 0x18dc
    Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
    Pfad der fehlerhaften Anwendung: \\share\xyz.exe
    Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
    Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

    Hi,
    >>The applications run fine when launching from a FQDN share
    It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
    the share correctly.
    If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

    Error on load: System.IO.IOException: The process cannot access the file
    '\\server1\SCANSHARED\.pdf' because it is being used by another process.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
       at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
       at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
    I faced this  error in event viewer  when users want to view documents from this third party deployed scan solution
    here I have two WFS servers  and they configured with load balancing in F5 .
    when I enable both servers in F5 I receive this error messages in 2nd server,
    when users want to view documents
    adil

    Do you have antiVirus installed on the sharepoint servers?
    These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
    are uploaded.
    Please follow this KB and exclude the folders from Scanning.
    http://support.microsoft.com/kb/952167
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • I cannot access the internet, I tried to answer that said to go to settings, safari, tap clear history, cookies and cache, cut off, then on, but it did not work.  When I go to internet the screen is grey??? please help I am a new user!!

    I cannot access the internet the screen is grey, I have tried by using the answer from someone but it does not work...I went to settings, tap safari, then clear the history, cookies, and cache, then turn off ipad.  When I did that twice, it did not work.  How long does it take for the clear history to work?  I am a brand new
    user of the ipad2 and I am disappointed that this is happening already.

    Have you been able to access the internet previously and now it's suddenly not working, or are you still trying to access the internet for the first time on your iPad?  Are you at home trying to connect through your home router?  If you are at home, did you put your home routers encryption code as your password?  The encryption code is what your iPad is looking for and it is usually found on the router and is typically a 13 digit combination of letters and numbers.  Let us know......

  • Excel Automation with Interop - Windows Service - Microsoft Excel cannot access the file

    I have a windows console application, which automates Excel. In our scenario the application gets called from a Windows Service. If the console app is executed directly everything works fine. If the console app is executed through the Win Service, we get
    the following error when trying to open the excel file:
    Unhandled exception Occured : 'Microsoft Excel cannot access the file 'bla.xls'. There are several possible reasons:
    The file name or path does not exist.
    The file is being used by another program.
    The workbook you are trying to save has the same name as a currently open workbook.'.'
    The code snippet used to open the file:
    xlApp = new Application();xlApp.Visible = false;xlApp.UserControl = false;xlApp.Application.ScreenUpdating = false;xlApp.DisplayAlerts = false;xlWorkbook = xlApp.Workbooks.Open( Filename: filePath,  UpdateLinks: 2,  IgnoreReadOnlyRecommended: true, Editable: false);
    The console app and windows service are running on a Win Server 2008 64-bit OS with Excel 2013 32-bit installed. The service is running with a special user account, which has all the right permissions on accessed files and folders. The excel process is also
    started with the same account (I cheched that one). 
    I already tried to do the following, but to no avail:
    Run excel.exe /automation -> worked fine
    Created the folders and also gave full control to the account under which the service is run (even gave full control to Everyone)
    C:\Windows\SysWOW64\config\systemprofile\Desktop
    C:\Windows\System32\config\systemprofile\Desktop
    Configured DCOM
    Excel Application -> Identity -> Specific user account
    Excel Application -> Identity -> Interactive User
    Excel Application -> Security -> Launch permissions -> Everyone full control
    Several combinations of the above
    So I really am stuck with this problem right now. Any input on this is appreciated.

    I have a windows console application, which automates Excel. In our scenario the application gets called from a Windows Service. If the console app is executed directly everything works fine. If the console app is executed through the Win Service, we get
    the following error when trying to open the excel file
    Microsoft does not currently recommend, and does not support, Automation of Microsoft Office applications from any unattended, non-interactive client application or component (including ASP, ASP.NET, DCOM, and NT Services), because Office
    may exhibit unstable behavior and/or deadlock when Office is run in this environment.
    If you are building a solution that runs in a server-side context, you should try to use components that have been made safe for unattended execution. Or, you should try to find alternatives that allow at least part of the code to run client-side.
    If you use an Office application from a server-side solution, the application will lack many of the necessary capabilities to run successfully. Additionally, you will be taking risks with the stability of your overall solution.
    You can read more about that in the
    Considerations for server-side Automation of Office article.

  • Cannot display the folder. Microsoft Outlook cannot access the specified folder location.

    Hi, guys
    I cannot view delegate mailbox in Outlook. Following is my configure.
    I have two mailbox A-User and B-User
    Login Outlook as A-User, click File -> Account Settings -> Delegate Access, add B-User and give Editor permission of Inbox.
    Right click A-User's root inbox and select Properties -> Permission, select B-User and check "Folder visible".
    Login Outlook as B-User on other computer, click File -> Account Settings -> Account Settings, select B-User and click Change -> More Settings -> Advanced, add A-User.
    Now I can see a root A-User in Navigation Pane. But when I click it, it shows
    "Cannot display the folder. Microsoft Outlook cannot access the specified folder location."
    or
    "Cannot display the folder. Microsoft Outlook cannot access the specified folder location. The operation failed. An object cannot be found".
    I searched some solutions from internet, but all of them don't work. Could you give some suggestions? 
    Thanks.

    Hi,
    First, please double check if you have given the right permission to B-User on your step 2.
    In addition, we can try to give a higher permission to the B-user to check the result.
    Please feel free to post back and let me know the result.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • I added Gmail to my iTunes store/account.  Now I cannot access the Store and after I enter my Apple Id password it tell me I need to verify my Gmail acct, press ok for details.  Once I press ok, the screen shows my Gmail address and underneath it states m

    I added Gmail to my iTunes store/account.   My gmail account is:  [email protected] and it shows up on the settings in iTunes, and my account.  The problem is I cannot access the store with this ID.  A response says:  You have not verified your ID, press ok to review instructions to verify your ID.
    Reply to this is:  An email has been sent to the address below with a link to verify your Apple ID.  Make sure to check your email and follow the link to complete the creation of your AppleID.
    Beneath my email address:
    Your Email has already been validated successfully.  Thank you.
    Please HELP.
    I am using:
    Windows XP
    Internet Explorer 9
    Norton 360
    iPhone 4
    Google toolbar on my computer.

    Hi Michael,
    Yes it is now resolved but not after I send iTunes a request for help and explaining the problem.  They send a first reply explaining how I needed to verify my account and gave me the link to do that.  You and I know that this did not help, so I replied telling them that this was not working and iTunes did the reset for me.
    You may want to open a help ticket with iTunes help.  That is the only way it works.
    Regards,
    Gloria J Bisson

  • I did a software update on my ipad and now cannot access the internet. how can i fix this?

    I did a software update on my ipad to 8.1 and now cannot access the internet.  How do I fix this?  My mail updates, but to get internet access I had to move from wifi to cellular data, and now even cellular data does not allow me access.

    Hi Go to settings Reset Network Settings After Reset you need to enter your Router wireless key Before you do this turn off your Router for 30 seconds Also an option is to go on Websites for your make of Router look for any Firmware updates but you can do this later. Cheers Brian

Maybe you are looking for