I cannot activate a ringtone which I prepared with Iringer. It appears in iTunes under sounds but doesn't appear in sounds on the iPhone!!!

if you created a ringtone, it should appear in the tone menu in itunes.
Is the ringtone 30 seconds or less?
Also I would check the iringer support site to resolve your issue.

Similar Messages

HT201401 Cannot activate my phone to restore factory settings, I have tried through Itunes but continually get the message activation server is down.

I cannot activate my phone to restore factory setting, I have tried through Itunes but receive the message the message that activation server is temporarily unavailable.

booner2@@@ wrote:
I cannot reactivate my phone, activation server is down, cannot get a response from you at Apple. Please respond.
And you're not going to get a response from Apple on this forum. Again, this is a user-to-user technical support forum.
To contact APPLE support, go to getsupport.apple.com.

HT1414 I got my iPhone 4 unlocked from AT&T but whenever i try to connect my phone to iTunes for restoring, iTunes say me "there is no sim card installed in the iphone you are attempting to activate."

I got my iPhone 4 unlocked from AT&T but whenever i try to connect my phone to iTunes for restoring, iTunes say me "there is no sim card installed in the iphone you are attempting to activate."

sorry. you cannot discuss and find solution about the jailbroken phones in this forum.

"The file "iTunes Library.itl" cannot be read because it was created with a newer version of iTunes".

My computer is reading "The file 'iTunes Library.itl' cannot be read because it was created with a newer version of iTunes." I need help ASAP! Did I lose all my music?

Unless you deliberately downgraded iTunes this may be a sign of a corrupt library. SeeEmpty/corrupt library after upgrade/crash.
tt2

I uninstalled ver 11, installed ver 10.7 because ver11 won't work on my XPsp3 machine with my vinyl conversion software to mp3, but upon launch i get :"itunes library.itl cannot be read because it was created with a newer version of itunes'.

I uninstalled and deleted ver 11, installed ver 10.7 because ver11 won't work on my XPsp3 machine with my vinyl conversion software to mp3, but upon launch i get :"itunes library.itl cannot be read because it was created with a newer version of itunes'.

Hello, Stephen.
Thank you for the question. You will need to rebuild your iTunes library file in order to open an older version of iTunes. Below, I have included the article that walks you through this process. Start with the section labeled Re-creating the iTunes Library file.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Cheers,
Jason H.

I know the iphone 4s can turn off the vibrate for all sounds, but is there a way to keep the vibration on for just phone calls (with the ringtone also on) but off for everything else?

I know the iphone 4s can turn off the vibrate for all sounds, but is there a way to keep the vibration on for just phone calls (with the ringtone) but off for everything else?

Short answer: No. Long answer: Nope
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
WYSIWYG No hidden settings.
If you want to suggest this to Apple:
http://www.apple.com/feedback/iphone.html
Message was edited by: modular747

After installing latest iTunes I began having R6034 error messages, found and tried fox of removing 5 Apple programs and reinstalling iTunes. Now iTunes says my library cannot be accessed because it was created with a newer version of iTunes. HELP!

After installing latest iTunes, I began getting R6034 Runtime Error messages, found fix of removing 5 Apple programs, reboot and reinstall iTunes. Seemed to work but now getting error message that my iTunes Library (iTunes Library.itl) cannot be read because it was created with a newer version of iTunes. Need Help!!!

Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

HT4623 trying to active my old iPhone 3gs. it showing that activation server is temporary unavailable and on the iTunes showing that there is no sim card installed in the iPhone you are attempting to activate. I unlocked my phone then i upgrade it, after

trying to active my old iPhone 3gs. it showing that activation server is temporary unavailable and on the iTunes showing that there is no sim card installed in the iPhone you are attempting to activate. I unlocked my phone then i upgrade it, after that this happen. i tried with other sim same message come again and again.if any body know solution let me know. thanks

Was the SIM card activated on another phone? I assume this is an ATT style trying to use on T-Mobile? Was the SIM installed correctly? Is the carrier (like T-Mobile) operating IOS 6 devices yet?
If the SIM is a valid SIM from say T-Mobile, you may want to contact them for assistance activating the SIM card.
Activation and SIM issues typically point to the carrier. And if this was a CDMA phone say working with verizon, it will NOT work for ATT or T-Mobile as they use different electronics on the 3GS. The SIM slot is for international use only.

HT1296 I cannot sync with my music on itune to iphone. I checked the songs, or the play list, start sync, but it does not put them on the iphone. Some of the songs are from CDs

I cannot sync with my music on itune to iphone. I checked the songs, or the play lists, start sync, but it does not put them on the iphone. Some of the songs are from CDs

Hi Mike,
I have Iphones since they cam out buy IO7 on my iphone 4 is slow and frustrating. I sync itunes with sync window. I tried cable and wireless. I have enough space. If I have a playlist say with 200 songs it will say on itunes sync window syncing 200 songs however I only get 150 songs on my iphone. I have restored iphone twice, I have tried playlists and smart play lists. It seems not to sync the same songs all the time. Prior to IO7 in sinced all my songs. I see on the chats that this is a big problem. Do you have any solutions. the songs that dont sync are the same format as those that do.
Alx

HT1937 I want to activate my 3GS iphone, but a message from itunes always displays there is no sim card installed in the iphone you are attempting to activate. What can I do to activate my iphone?

I want to activate my 3GS iphone, but messege in itunes always display :- "THERE IS NO SIM CARD INSTALLED IN THE iPHONE YOU ARE ATTEMPTING TO ACTIVATE". What can I do to activate my iphone?

Install a working SIM card.

Cannot activate CS5.5 - internet connection error with Adobe servers + customer service non-existent

Just purchased CS5.5 and it works fine however I am not able to activate it. The program says I don't have an internet connection but I clearly do I as I am able to connect to all websites & email etc...
I have tried to contact customer support 6 times:
Contact 1: on hold for 1 hour and 20 minutes after which I was disconnected
Contact 2: on hold for 35 minutes then told it was out of business hours
Contact 3: on hold for 45 minutes then someone picked up the phone and then hung up on me
Contact 4: on hold for 15 minutes then someone hung up on me
Contact 5: on hold for 5 minutes then someone spoke with me and told me to delete a "host" file in Windows32 folder on our system. This didn't fix the problem and then the support person simply hung up on me...
Contact 6: currently on hold for 55 minutes and still waiting...
What is happening at ADOBE? You used to be so reliable now I am not even able to get through to support? It is very worrying... I have no options available any more... what do I do?
PLEASE HELP PLEASE PLEASE PLEASE PLEASE I AM NOW PLEADING FOR SUPPORT!
Richard

Greetings everyone,
I started this thread. Since the thread was posted, my activation issue has dissappeared - HOW I do NOT know. As a last desparate attempt, I uninstalled Norton 360 completely and this might have helped, however I am not sure. Doing the "ping" of activate.adobe.com still doesn't work even with Norton 360 uninstalled and all firewalls switched off. It is very strange that I am not able to ping activate.adobe.com and get a 404 error on https://activate.adobe.com/test but my issue is resolved... strange this seems still to be unresolved.
In fact, I tested that URL and the Ping from over 8 different internet locations within Sydney (friends homes, offices, internet cafe etc) and NONE were successful. How does THAT make it a USER problem when NO ONE can access it???
An Adobe rep contacted me directly by email and supported me directly, which was fantastic, but didn't actually help as all the support he provided was exactly the same as what I had done with other support by phone at least 5 times with no success.
I organised a very skilled computer tech to assist me with my issue and he did everything he could to try and open ports and gain access for the activation but after 6 hours of trying his conclusion was "Adobe is having the issues, not the users".
This seems to be a big problem with Adobe at the moment and should not be.
To Adobe:
I remind and highlight your responsibilities as a service/product provider, under the ACCC law:
http://www.accc.gov.au/content/index.phtml/itemId/961908
As a customer:
"If a service fails to meet a consumer guarantee, you may be entitled to a remedy—either fixing the problem with the services, a refund or compensation for any drop in value from the original price paid—depending on the circumstances."
Amongst other information within that page, I bring your attention to the fact that this issue your users are experiencing would be considered a "Major failure":
There is a major failure when (as the customer):
"you would not have engaged the service if you had known the nature and extent of the problem."
"the service does not meet the reasonable expectations for that type of service, and the problem cannot be rectified within a reasonable time."
and lastly, who is to fix the problem:
"The guarantees are made by the person or business that is providing the service. This means the service provider is responsible for fixing a problem when the service does not meet a consumer guarantee."
The runarounds Adobe is creating for customer, and hours of "on-hold" resulting in little or no customer service, is simply unacceptable and, in fact, a breach of your responsibilities and the law. Adobe... you seem to forget that our businesses or services rely heavily on your software to learn, teach, conduct business or whatever it may be. Our time is precious and the hours wasted to fix issues that shouldn't be there in the first place cost us a non-trivial amount.
Although my issues have been resolved, I am still nervous as it may happen again - I have received no indication of any rectifications of the issue and it appears it is still a major failure with other customers, meaning it could happen to me again at any time.
I would, and so would the rest of the people with these issues, like to know what your steps are, at a higher management level, to fix it and make sure it does not happen any more.
I highly recommend that you escalate these issues as a matter of priority and get your best people onto it urgently.
In the hope of a positive outcome,
Richard
A frustrated customer

IMessage cannot activate after moving to new operator with same number (MNP)

Hi
I recently started using a new mobile operator, but kept my number from the previous operator.
After endless attempts at activating iMessage, I always get "Cannot activate iMessage".
I tried endless things: completely wiping out my device and starting from scratch without restoring from backup, working on Wi-Fi, working on cellular, changing DNS address, logging out of iMessage on my Mac. I have also verified that I am able to send text messages to international destinations.
I'm using an iPhone 4 with iOS 6.1.3.
Please help! I am desperate here.
Thanks

Hello. I had exactly the same problem, a few weeks ago I switched from Telcel operator to Movistar Mexico and iMessage / Facetime were unable to activate. The point is that in some plans, Movistar does not allow to send "international" SMS , even the fact that you have unlimited messages to national carriers ( within Mexico ). So you have to purchase an additional "recharge bag" starting from 30 MXN , which will allow your iPhone to send the SMS which will activate iMessage / Facetime. This was the fix ! Best regards.
In Spanish here :
Hola. Tuve exactamente el mismo problema, hace algunas semanas me cambie del operador Telcel a Movistar Mexico y entonces iMessage / Facetime ya no se podian activar. El punto es que en algunos "planes", Movistar no permite enviar SMS "internacionales", aun cuando tienes mensajes ilimitados a operadores nacionales ( dentro de Mexico ). Asi que lo que tienes que hacer es comprar una "bolsa adicional de recarga" que puede ser desde 30 pesos mexicanos, lo cual le permitira a tu iPhone que envie el SMS , que activara iMessage / Facetime. Esto soluciono el problema !. Saludos.

To get selected rows from alv output which is prepared with funciton module

Hi ,
I have a program which is prepared ALV with funciton modules.
Now i have to get selected rows(more than one).
Can i use method CL_GUI_ALV_GRID -> get_selected_rows.
or any other way to get selected rows.
thanks,
shyla

Under the callback subroutine ( u have passed them in I_CALLBACK_USER_COMMAND of ur function module) - u do like this -
DATA : ref1 TYPE REF TO cl_gui_alv_grid,
t_selcted_rows type LVC_T_ROID.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING e_grid = ref1.
call method ref1->get_selected_rows
importing ET_ROW_NO = t_selected_rows.
Hope this solves ur problem.

I bought an album from iTunes with ringtones and text message tones but how do I use them on the iPhone

I bought an album from iTunes containing text and ringtones but I cannot access them in the iPhone settings. How can I use them for individual family and friends?

Delete the current copies and then download again (free) from your purchased history. If the problem persists contact iTunes Store support staff through the report a problem links in your account history.
tt2

The IPhone cannot be synced. The disk could not be read from or written to. THis appears after everything has synced but Photos. If you delete all the photos, the IPhone syncs fine.

So heres my problem... If I try to sync my iPhone or IPad to our computer I get an error that reads "The IPhone cannot be synced. The disk could not be read from or written to." The error comes at the start of syncing the photos. I have removed the photos from my iPhone it syncs fine, so the problem has to be with the photo library, RIGHT? The problem is iI have never had this issue before. I have my iTunes and iPhoto on a external hard drive and this has been fine in the past, but now i can not even view my photos on my iTV... ANY HELP???

Since you noticed this problem, have you shut down (powered off) and restarted your iMac?
iPhoto does the syncing for photos. Are you able to run iPhoto manually (start it up from the Dock) and access your photo library?

I cannot activate a ringtone which I prepared with Iringer. It appears in iTunes under sounds but doesn't appear in sounds on the iPhone!!!

Similar Messages

Maybe you are looking for