I cannot change the wireless LAN encryption WEP settings

Dear all,
I have a WRC-1000 which I did not use for about year and a half. Now I reconnected the unit and during the configuration I cannot change the wireless LAN settings for security (WEP). No matter what I do it keeps stuck on 128 bit WEP.
It also does not show the WEP key settings (so the screen where I should configure the WEP key).
This is what I have done so far: Full reset, reload default configuration, updated to latest firmware. Still no change. I suspect a hardware failure. Is this a memory failure (flash)??
Can someone help me out?
Thanks in advance

Hi
Do you speak about the router settings or about the WLan setting on the notebook???
Did you try to use a Wlan connectivity tool like Intel ProSet Utility or Atheros WLan client utility?
Depending on your WLan card I would recommend checking these both tools and try to establish the WLan connection using one of these programs!

Similar Messages

Hi i cannot change the brightness on my late 2011 macbook pro.

Hi i cannot change the brightness on my late 2011 macbook pro. It is stuck on the lowest level in which i can't view the screen without a flash light. Please i need help how to solve this. I was on my computer when i checked the back which it was really dusty, i tried unscrewing the bottom however some screws were too tight so i took it upon myself and got a rod and startedremoving the dust off the vents and i may have clicked something as i closed the lid on the macbook i could hear the sounds still from the film but the lid was closed as i opened it back up the brightness was on low but sounds were still playing. All the buttons work , all of the F keys, apart from the brightnes keys. I can shine a tourch on the screen and see the display but the brightness will not change but i can see when i click the brightness it says it changes. I have connected it to a spare tv i have via hdmi and i really need help as this is my primary computer and i need it for work when going away. Thank you

Try SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
Ciao.

I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.

I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.
===Answer===
Comment on usual method and solution, by a forum Moderator.
As long as there are no confounding factors, such as certain extensions, or a user.jsfile the procedure is as follows
# Open a new tab and type "about:config" in the address bar.
# In the Search bar type: "newtab"
# Locate and double click "browser.newtab.url"
# In the "Enter String Value" box change "'''about:newtab'''" to "'''about:blank'''" and click OK.
# Verify that the value has changed and now all new tabs will be blank.
See post under by ''pirate048'' [/questions/976589?page=2#answer-509482] ~J99

Have to say that I rather agree with Mark..all we want is a simple, unadorned clean page that doe not track and show usage!! WHY NOT!! Is it too simple for developers..we aren't all (nor do we want to be!) software experts! Come on Mozilla..tidy up and clean up..it might be a quicker programme too!!

I bought an Air from someone and I cannot change the Apple ID in the apple store for the updates... even I am logged in for Itunes... PLEASE help..

Hi guys, finally I made it to the apple family by buying an Air from a guy I knew... But I cannot change the ID in the apple store for updates... I managed to change it in Itunes, but when I want to download the updates it would tell me that I should log in with the other account...
Please advise...
Thank you!!!

The OS and the preinstalled iLife apps are permanently assigned to the Apple ID of the original owner. You need to ask the original owner to call Apple Care and request that the Mac be released from his Apple ID.
The only secure way to use a second hand Mac is to erase the HDD and install a fresh version of OS X.
The only version of OS X that the original owner can pass to you is the version of OS X that came preinstalled on the Mac. The original owner cannot legally pass to you any apps that he bought in the MAS.

After upgrading to Maverick, when I double click on the attchment I get this message "...could not be saved, because you cannot change the contents of that fold

After upgrading to Maverick, when I double click on the attachment I get this message "...could not be saved, because you cannot change the contents of that folder. Change the folder properties and try again, or try saving in a different location." It happens for all types of files.
Any suggestions as how to fix this?
I'm on a Mac OS X 10.9.3 with Thunderbird 24.5.0

Thunderbird > preferences (I think on a mac) and under attachments set the folder

I have multiple devices with the same cerificate, once I have a an exception for one, FF denys access to the others. I cannot change the certificates, I need to stop FF blocking them.

I have multiple devices with the same cerificate, once I have an exception for one, FF denys access to the others. I cannot change the certificates, I need to stop FF blocking them.
== This happened ==
Every time Firefox opened
== I attempt to access a web front end on an IBM SVC device

You can't use the same certificate more than once.
See also [[Certificate contains the same serial number as another certificate]]

Firefox crashes whenever i want to install any addon or download any file. Some times i am receiving error while downloading any file like "could not be saved, because you cannot change the contents of that folder"

I am the user of latest firefox 3.6.6 browser. I am getting problems of frequent crashes whenever i tries to install any addon. The crashes also occures whenever i want to download any file.
I am also receiving errors while downloading any file like:
"C:\Users\****\AppData\Local\Temp\******.001.part could not be saved, because you cannot change the contents of that folder.
Change the folder properties and try again, or try saving in a different location. I already changed it many many times but still the same problem."
Adobe flash palyer is also giving problems of not responding. I am using updated version of it already. Java is also updated.
I already uninstalled firefox compeletly and re installed it many many times but still the same problem. I also scanned my computer with avira and malware bytes' Anti malware and got no dection. Please ractify this problem ASAP lest my profession will suffer.
== Crash ID(s) ==
b7f518f2-8d86-41ca-8bab-aee632100709; 1d790e10-d8eb-4904-98c9-94bc62100708; f042d319-b9f8-42ed-a8cb-57c7d2100708

Please help.
It is getting worse
Adobe flash player is crashing. I already uninstalled and re installed the latest ver. Also it is hanging randomly.
Please help.

When firefox trys to auto update, or I manually download the new version, or some but not all downloads off of the web, I get this error message. C:\Users\John\AppData\Local\Temp could not be saved, because you cannot change the contents of that folder.

First off, when firefox trys to auto update, it fails. It tells me to try and download the new version from mozilla's site. When I try to download the new version I get this: (C:\Users\John\AppData\Local\Temp could not be saved, because you cannot change the contents of that folder.)
This is the same message I have been getting when I try to download other things off the net. (When I use other browsers to download I dont have this problem)

Please help.
It is getting worse
Adobe flash player is crashing. I already uninstalled and re installed the latest ver. Also it is hanging randomly.
Please help.

In iPhoto '11 I cannot change the book settings. For example, adding page numbers. There is no "option" button as is suggested by the help item.

In iPhoto '11 I cannot change the book settings. For example, adding page numbers. There is no "option" button as is suggested by the help item. How can I change to book settings?

The "options" button should appear at the bottom of the iPhoto window, when you view your book, then the Book Settings Button should be available and you can activate page numbers.
But remember, that the settings available will depend on the Book Theme you selected. The above shows the settings for one of the "Travel" themes. In a Picture Book Theme, e.g. you cannot add page numbers.
What theme and book size are you using?
Regards
Léonie

Where is my text box in final cut pro? I cannot change the default text at all?

Hi, as the title says, I use a default final cut pro title or ending for a video and I cannot change the text, all youtube tutorials just show that you click on the text box, the boxes appear, and then to the right in the text window you literally just type and change it, which ive done several times before, but I just got a new mac, and now that is impossible to do, what can I do? I dont want to upload videos that say, TEXT GOES HERE

hey andy,
i think what you're gonna have to do is just hit command 4!
That should bring up the inspector where you can change the font!
From Kelly

Any pointer to look into, when buyers cannot change the payment terms

Any pointer to look into, when buyers cannot change the payment terms on the POs due to the error u201CExpected/Overall value should be equal or greater than invoiced amountu201D
A thought process to look around, to investage this issue is appreciated.
Thx/RICK

Rick,
this message may be due to the user trying to change a Purchase order item payment terms when there is already a blocked supplier invoice registered for the item. The vendor invoice payment terms normally override the PO payment terms. Users sometimes think they can speed up payment to a vendor by changing the payment terms on the PO. This can only be done before an invoice is registered and the PO term can be overridden at invoice entry time in any case.
Have a look at the terms on any associated invoice and the vendor record for the Purch org.
You may also want to have a look at your business process for blocked invoice resolution.
If the user wishes to speed up payment of an invoice they need to contact the users who are responsible for the vendor payments. We call them AP staff in our org - stands for Accounts Payable.
Hope this helps
Allen

Why cant I change the wireless carrier

Why cant I change the wireless carrier on my IPAD. Verizon has very weak signal and cost more for where i use it

Updates the Bold Text setting to also change dial pad text
When you view the details before installing it is one of them.
Adds iCloud Keychain to keep track of your account names, passwords, and credit card numbers across all your approved devices
Adds Password Generator so Safari can suggest unique, hard-to-guess passwords for your online accounts
Updates lock screen to delay display of "slide to unlock" when Touch ID is in use
Adds back the ability to search the web and Wikipedia from Spotlight search
Fixes an issue where iMessage failed to send for some users
Fixes a bug that could prevent iMessage from activating
Improves system stability when using iWork apps
Fixes an accelerometer calibration issue
Addresses an issue that could cause Siri and VoiceOver to use a lower quality voice
Fixes a bug that could allow someone to bypass the Lock screen passcode
Enhances the Reduce Motion setting to minimize both motion and animation
Fixes an issue that could cause VoiceOver input to be too sensitive
Updates the Bold Text setting to also change dial pad text
Fixes an issue that could cause supervised devices to become un-supervised when updating software

Big Permissions Problem: "You Cannot Change The Contents Of This Folder"

I installed Tiger some time ago (and need to upgrade now from 10.4.6 to 10.4.9).
I haven't used it much since some of my software will only run under Panther.
In any case, I'm using it now and have been having big permissions/user accounts problems.
I have two users on the computer "robert" and "ra", both with admin privileges (I set up two because I was trying to get around these problems -- I'd be very happy with just one).
I have 10.4.6 installed on an external HD and boot from that into Tiger (I have Tiger on another external HD as a backup, and my main HD in the iMac has 10.3.9 -- that's what I boot from when I need to run older programs).
In any case, both "robert" and "ra" have ADMIN privileges. But I get weird ownership problems. For instance, if I am logged in as "ra" and try to play a Realplayer file streaming from the web (in Firefox 1.x), I get the error
/Users/robert/Desktop/307e6wz7 could not be saved, because you cannot change the contents of that folder.
I check the ownership of the "Desktop" folder -- read/write for "ra".
If I right-click I can save the Realplayer file to the desktop.
Same with other links.
I've also noticed other ownership problems (blocked folders at finder level) but can't duplicate tonight. Is this an obscure error, or is there something amiss in ownership recognition? Is there some way I can sort all out? Login in as "root" and set all right?
Thanks
G4 iMac Mac OS X (10.4.6)

Yes they do. When you installed them you dragged these particular apps to the Applications folder. Doing so automatically attributes the program with the ownership attributes of the account owner who installed them - 'robert.'
Proper application installers install apps under the system/admin ownership. You can try to fix these apps by changing their permissions:
Select the app and CTRL-click to open the contextual menu. Choose Show Package Contents from the contextual menu. Select the Contents folder and press COMMAND-I to open the Get Info window. In the Ownership and Permissions section click on the tiny arrow icon to expose the panel. Click on the little lock icon to authenticate. Change permissions as follows:
Owner = system with Read/Write privileges
Group = admin with Read/Write privileges
Other with Read-Only privileges
Click on the Apply To Enclosed Items button. Close the lock by clicking again on the lock icon.

Cannot change the Canvas Extension Color from "Background" to a color of my choosing. Is this a glitch, or is there some setting that I can change?

Cannot change the Canvas Extension Color from "Background" to a color of my choosing. Is this a glitch, or is there some setting that I can change?

It depends on how exactly you are doing it but to change the background, I suggest watch this video:
<How To Change Background in Photoshop Elements 11 - YouTube>
Hope this helps.

I cannot change the Printing Preferences on PSC2175. When I click preferences nothing happens.

I cannot change the Printing Preferences on my HP PSC2175. When I click it, a window appears and then disappers instantly. It cannot print Word documents properly (using Microsoft Office 2010) or PDF documents properly. It can print text perfectly well, but diagrams, text boxes, and grids do not print at all, and other times it prints only part of it. I am using Windows 7 32 bit. This started after upgrading from Vista.
This question was solved.
View Solution.

Hi,
Have you tried uninstalling and reinstalling your driver located within the Windows 7 operating system? As you probably are aware that HP didn't create a downloadable Windows 7 drivers. I would try uninstalling and reinstalling the driver.
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

I cannot change the wireless LAN encryption WEP settings

Similar Messages

Maybe you are looking for