I cannot complete stage 3 for setting up messages; 'tap and send' - any advice?

Any advice to complete set up of messages on my new ipad? I cannot complete 'stage 3 - tap and send'?

A fairly common error people make when using messages, is to type their outgoing message in the Subject field which is just above the Message field. In fact, I think it's a good idea to turn the message field to OFF.
Settings/messages/turn subject field off

Similar Messages

Error message "Data cannot be maintained for set type COMM_PR_PUR_1

Hi
While replicating the material master through R3AS I am getting an error for which the details to be checked in SMW01. In SMW01 when I selected the record for error details I am getting above error message. How to resolve ? Pls guide me stepwise. For your information I has cleared SMQ1 in R3 & SMQ2 in SRM
For curioisity next I selected all such error logs & deleted. It gave me one warning (some inconstinecies error) which I ignored. After that I checked SMQ1 of R3 & SMQ2 of SRM. No log
But I observed a strange thing. Whatever material codes I am creating it is going straightway to SRM without running R3AS transaction. I checked R3AM1, selected the row and cancelled. But still going without any interferrance. Why ? How shall I stop this.
Thanks

Hello,
>
BNR wrote:
> Hi
> While replicating the material master through R3AS I am getting an error for which the details to be checked in SMW01. In SMW01 when I selected the record for error details I am getting above error message. How to resolve ? Pls guide me stepwise. For your information I has cleared SMQ1 in R3 & SMQ2 in SRM
>(...)
Have a look at OSS note 1049693 - Data cannot be maintained for set type COMM_PR_PUR_1.
Regards.
Laurent.

Mac: couldn't complete update for Ps error message 49 in Creative Cloud

Mac: couldn't complete update for Ps error message 49 in Creative Cloud. Anyone help?

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I have an iMac with 10.9.1 and an iPhone 5 also updated to the newest system and I cannot get a sync set up between Ical and the iPhone or Outlook 2011 mac calendar with the iphone

I have an iMac with 10.9.1 and an iPhone 5 also updated to the newest system and I cannot get a sync set up between Ical and the iPhone or Outlook 2011 mac calendar with the iphone. I would perfer using outlook but will settle for the Imac calendar

It depends on what iMac you have. If it is an old PPC (G4 orG5) iMac then no further upgrades are possible. If it an Intel iMac:
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
(NB: PowerPC applications can still be run in Snow Leopard using Rosetta, but they will not work in later versions of OS X.)
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
iCloud system requirements:
http://support.apple.com/kb/ht4759
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion
or Mountain Lion:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

Process for setting up new directories and files on Unix

I am trying to document a process �Process for setting up new directories and files on Unix batch servers�.
Developer will be developing project on Windows and I need tell them as well as QA team how the Unix directory and file structure.
Please let me know how is the process in Unix on AIX.
If I get some documentation regarding this it will be useful.
Thanks in advance
Regards
San

well on unix/Linux/solaris there are no drives but storage heirarchy starts with a root directory represented with ' / '. and all files and directories are created in root directoy like
/usr/local/bin
/export/home/san
etc
also filesystem of unix consists iNodes rathar than FAT entries as in case of Windows.
some basic information is available at
http://www.techonthenet.com/unix/index.php
Regards

I am getting error code -9808 saying cannot complete request for the i store, i am getting error code -9808 saying cannot complete request for the i store

i am getting the erorr code -9808 saying that we cannot complete my request for the i store to setup my new device ...what up with that

Try here:
iTunes Store: "An unknown error occured (-9808)"

After Installing - Cannot Complete Installs for Programs

I installed Snow Leopard and it seemed to be running fine after I granted myself Admin access again.
However, I tried running the installs for multiple programs including a security update to the OS, iLife and iWork - the installs get to "Preparing Installation" and freeze.
I have tried leaving some of these installs up for up to 48 hours and there is no progress.
Yahoo Messenger also freezes on sign in with a similar problem.
How do I fix this so that I may use Yahoo Messenger and run installs again?

I suggest you might try this:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If this doesn't help any, then reinstall SL.
To upgrade iLife and iWork you will have to purchase the '09 versions. There is no free upgrade path from '08 versions.

FM required for setting the message body with values from table

Hi all,
I have a retq wherein in tcode VL31n when i create the IBD,after saving the document,i need to send a mail to few people in the FI dept with the foll deatils:
Inbound delivery no.
A. Bill of Lading no.
B. Bill of Lading date
C. No. of containers
D. Invoice no.
E. Invoice date
F. Supplier name
G. Vessel name
H. Name of the receiving port
I. Final Destination,,
J. Expected date of arrival
The method used is SAVE_AND_PUBLISH_DOCUMENT.i get all these deatils in the table it_xlikp.But is there any FM by means of which i cna read these values and set the message body with these values and send this as a mail using the FM SO_DOCUMENT_SEND_API1?Full points will be awarded..Any help is appreciated..
Regards,
Disha.

HI Disha
Check out these links. They will surely help
http://www.geocities.com/mpioud/Z_EMAIL_ABAP_REPORT.html
http://www.thespot4sap.com/Articles/SAP_Mail_SO_Object_Send.asp
If you find this answer useful, please reward me for the same.
Good luck
Karthik Potharaju

Setting JMS Message header and properties in JMS Adapter ESB Component

Hi,
I am new to using some of these adapters in Oracle ESB and need some help.
I am trying to define a JMS Publisher using JMS Adapter component in JDeveloper. I would like to publish messages with message property set to a topic. I dont find a way to do that.
I see that for consuming JMS messages, the JMS Adapter allows to specify message selector but I could not find a way for producing message with a user defined message property. I would like to use that property in the message selector to filter messages and consume.
I am using Oracle SOA Suite 10.1.3.3.x
Can someone help please?
Thanks.

Thanks for the response.
I think I found the solution although I havent tried it out yet.
ESB sample 110.JMStoJMSHeaders outlines the approach.
It is my understanding that JMS Message selector can work on JMS header or JMS properties (user defined) but not on JMS body. (All the three constitue a JMS message). Hence the need to set a JMS property prior to publishing the message to a topic/queue.
Thanks.

Since doing the update to iOS 6 my connection isn't staying for facetime or messaging. And suggestions

Since updating my iPad 3rd generation to ios 6 I am having trouble connecting with FaceTime and messaging. Anyone have any suggestions?

They've changed it in iOS and updates (and updates ONLY) do not require a password since it is really unnecessary as they have it on record that you were the one who bought the app. Why is more security needed, you aren't going to be charged for anything?
Next time you update and app go to the App Store and try to buy something. You will be asked for your password.

This ipad cannot complete the activation process press home button and start again

this ipad cannot complete activation process.this error am getting after restoration of ipad 3 any help
imei 013316009591665

Hi jjpatos,
If you are having issues activating your iPad, you may find the troubleshooting steps outlined in the following article helpful (the article is aimed at iPhones, but should apply to activation issues with iPads as well):
Get help activating your iPhone
Regards,
- Brenden

Best "Capture" workflow for projects mixing HDV tape and XDCAM footage

I'm trying to determine the best workflow for projects that combine XDCAM and HDV footage.
I'd obviously do the editing in a project designed for XDCAM, as that's the higher quality footage,
and render the HDV clips in the XDCAM timeline...ending up with an XDCAM end product.
I'd use SONY'S XDCAM TRANSFER to get the clips into FCP.
My question concerns capturing the HDV footage in this scenario. I've never been able to get
the Log and Capture feature for HDV footage to work, unless I've created an HDV project and am capturing into that HDV project.
So, generally, I create an HDV project, open the log and capture utility which is now set to capture HDV, and then capture the footage. I then close that project and create a new project, designed for XDCAM footage. I use XDCAM Transfer to get the XDCAM footage into the project, and I import
the previously captured HDV footage into that browser and start editing, rendering the HDV in the XDCAM timeline.
My question...do I really have to open, what is essentially a "fake" HDV project just to capture that HDV footage? You don't seem to have the option of capturing HDV footage (out of a camera or HDV tape deck) directly into an XDCAM project. If I try to change the capture or audio video settings of the XDCAM project to HDV, you get messages saying you can't do it.
Is there something I'm missing or a more streamlined way of doing this?
Thanks in advance for any input.

No need to jump through these hoops. Just set yourself up with a universal Easy Setup that will handle both. Choose your regular XDCAM HD Easy Setup then open the Audio / Video Settings window and change the Capture Preset to "HDV" and the Device Control Preset to "HDV Firewire" ... then click the "Create Easy Setup" button and save it for recall whenever needed.
Regarding the overall workflow, I'd seriously question the idea of creating XDCAM HD masters. No real benefit to that unless you need to export to XDCAM HD. Much better would be export your final master as Apple ProRes 422.
Best
Andy

Need help: message split and send in BPM

i have this mapping where the idoc has to be split first before passing it to a BPM. the mapping should perform like this
from
IDOC
   segA
     segB1
     segB2
     segB3
   /segA
/IDOC
to
IDOC
    segA
      segB1
/IDOC
IDOC
    segA
      segB2
/IDOC
IDOC
    segA
      segB3
/IDOC
I was successful in doing the 1st step of mapping requirement for the above transformation. The next step was to map per occurence of IDOC to another target message and send it (ex. above is 3 occurence of IDOC, so there should be 3 mapping and sending that should happen. My problem now is how to design the BPM for this. Any suggestions?
Message was edited by:
        Brian Lo

create one MT such as
root
|__IDoc
|__segment
duplicate the subnode in the target message mapping (right click on the node and select dupliate subtree) and ten do the mapping...here u can go 4 this approach only if the number of number source segments (ie. sega, segb1, segb2, segb3) are constant....have read in coupe of threads that split mapping is not possible for idocs.....u may also need to check on it

Cannot mount 'My Book' HD no matter how I try - any advice how I can do this?

Can you offer any advice or help with the following:
I have a WD external Hard drive connected to my iMac
I cannot get the HD to mount although the Smartware disc shows on the desktop
I've tried disc verification and repair and the result is that the HD is fine - no errors or problems indicated - the HD shows in Disc Utility but not in finder sidebar.
I've tried everything to get the HD to mount, all to no avail.
It will mount on my MacBook so i don't think the problem is with the HD
When I go to Finder - Go - Folders - and type /volumes all the HD folders are showing but with a little delete icon in the bottom right hand corner (little red circle with line through).
When I go to Time Machine it is not showing me the 'My Book' Drive for backup - it says no ndrives available.
This has only happened in the last three days. Before that the HD has been working perfectly for the last two years as my backup drive.
Any thoughts or advice would be appreciated.

I click the icon in the taskbar. The editor works fine but the organiser has stopped working. I have 4 catalogues and approx 19000 pictures in them but organiser has stopped working.Have reinstalled the software but this didnit resolve the problem

My 2nd generation ipod touch almost completes update of version 4 then error code 3259. any advice to help. Seems to download but problem when processing

2nd generation ipod touch shows error message 3259 when trying to update with version 4 software from itunes. Looks as though downloading update but problem when processing. Any advice? thanks

Try here. If not successful, try looking at the previous posts on the right under the heading: More Like This that have your same problem Start with the one with the green checkmark.
iTunes Store reporting error - 3259

I cannot complete stage 3 for setting up messages; 'tap and send' - any advice?

Similar Messages

Maybe you are looking for