I cannot compose or reply to email messages in gmail after upgrade to 3.6.12. Shows :Loading". Gmail works ok in IE.

After upgrade to 3.6.12 Firefox I cannot compose an email in Gmail. Shows that Gmail in "loading".
Gmail works in IE. No problems before upgrade.

Did check the pref dom.storage.enabled and make sure that the value is true?
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br />

Similar Messages

  • Cannot compose or reply to emails

    I cannot compose or respond to emails on my iPhone 5c. I can read them. My iPad mini is working  fine but not my phone.

    Hi JECofer,
    Thanks for visiting Apple Support Communities.
    If you're not able to compose or respond to email on your iPhone, first force the Mail app to close:
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app's preview up to close it.
    These steps come from this article:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    If the behavior continues, try these steps next:
    Restart your iOS device.
    Delete the affected email account from your device.
    Tap Settings > Mail, Contacts, Calendars.
    Choose the affected email account, then tap Delete Account.
    Add your account again.
    From:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    All the best,
    Jeremy

  • Cannot compose or reply to emails in Outlook

    I can read email but get no response when I try to reply or compose a new e-mail on my Dell laptop.  My account works fine on my iPhone.
    Help please!

    Hi,
    I suggest to open Outlook in application safe and check if the same issue persists.
    Click Start and start typing ‘outlook /safe’ in search bar and hit
    Enter. (Without the quotes and note the space in the command)
    If you’re able to work with Outlook in safe mode, then follow the steps below to disable add-ins.
    Click File menu, click Options > Add-in, click Go button in the Manage: Com-in Add.
    Check if there is any add-in, clear the checkbox to disable it.
    If the issue still persists, create new profile in Outlook, configure an email account and verify the status.
    Refer to the article provided below on how to create new profile:
    http://support.microsoft.com/kb/829918
    Best Regards.

  • Cannot compose or reply email with outlook using Safari

    cannot compose or reply email with outlook using Safari

    Thanks Allstar! I have been trying for days to figure this out

  • My mail messages are blank after upgrading to OS X Mavericks. How do I fix this??

    My mail messages are blank after upgrading to OS X Mavericks. How do I fix this??

    Hi, I had this same problem. I have a load of work subfolders and was showing the message header but no content. I think it lost the link to the original messages.
    There may be a simpler way but I fixed it by going to the mail folders in finder. I took the following steps:
    Go to user library (hold down the alt key whilst clicking the Go menu in finder to access user library)
    Go to user/Library/Mail/V2/Mailboxes. You should be able to see your mailboxes and your original messages (ending .emlx) after clicking down the hierachy in each mailbox. For some reason mail added a "-2" onto the end of each mailbox which I think has caused the problem.
    Copy each required mailbox (.mbox) onto desktop. I removed the "-2" at this stage to clean things up.
    In Mail, choose File/Import Mailboxes....
    Import data from: Apple Mail. Click continue, navigate to desktop and choose the relevant .mbox folders. Click Choose.
    It should then import the mail to a new folder called import in mail. You can then rename that folder or move the subfolders out.
    I moved the .mbox folders on my desktop to my documents folder as a backup just in case. I then deleted the problem mailboxes from the finders mailboxes folder.
    Problem solved - for me anyway!!
    Hope this helps.

  • Why is firefox crashing every time I try to compose or reply to email in Gmail and Hotmail?

    After I upgraded to Firefox 10, I can open gmail and hotmail, read email, but if I try to compose an email, or reply to an existing one, it crashed. Also, just now when I tried to fill in this box here with firefox, it crashed. I am now using Chrome, and will continue to do so until there is a solution. This crashing thing is more than a little annoying.

    https://support.mozilla.com/en-US/kb/Firefox%20crashes#w_get-help-fixing-this-crash
    Type '''about:crashes''' in the URL bar and hit Enter. <br />
    # Middle-Click the hyperlinks to bring up each Crash Report page in a new Tab; each page may take a few minutes to load.
    # '''Then copy'n'paste the URL of each of those reports into the message box here.'''
    # We'll see if we can help you figure out what is causing those crashes to happen.
    If you can't open Firefox or keep it open long enough to get the Crash Report ID's, even in the Firefox Safe Mode - see the section entitled - '''''You can't open Firefox because it crashes at startup even in Safe Mode:'''''.

  • Cannot compose or reply using yahoo mail with firefox

    I have done everything Yahoo says to do which is FF's solution to my problem, but it does not solve the problem
    Yahoo mail works fine with IE & CHROME but with FF 33 & 34 it will not allow me to compose or reply to an email!
    And the checkboxes with the icons inside have been there for MANY versions.
    Sad that I will have to switch to Chrome or IE

    I am suddenly having this problem with not being able to
    reply/forward to (certain Gmail conversations).
    Now using, Mac OS 10.5.8 and experienced the presence of this issue with Firefox 3.6.10. AND 3.6.13 but not with Beta 4.
    I have used Safari and the error is not reproducible. This issue is exclusively present to Gmail in FF.
    I can confirm that FF config is presently dom.storage.enabled.
    I have started FF in safemode, disabled, updated and enabled all plugins and add-ons, restarted FF and desktop many times, the issue is still present in FF 3.6.10/3.6.13.
    Only some conversations cause this error. When I click on particular conversations reply/forward tab, the page freezes and the only way to temporarily resolve this, is to click the refresh icon as F5 will not work.
    It does not freeze the whole
    FF browser, just the window with Gmail.
    I need a fix as FF is my primary browser.
    Thanks in advance! :-)

  • Just upgraded and cannot send or reply to email

    I just bought a MacBook Pro (15"/216gHz/2gig ram) and transfered everything via firewire from my old PowerBook G4. When I attempt to reply or forward email, I click on the button (or use the menu) and absolutely nothing happens. I can click compose and get a new email screen, but when I click to send nothing happens. I receive email without troubles from all my accounts. I have no problem sending and replying to email with my old G4 (and the other computers on my Airport network - so it's not the network) and all the preference settings for my accounts are identical. Any ideas or assistance?

    In the other thread where you posted about this problem, I suggested you to reset Launch Services. Have you tried that or not?
    I’ll repeat it here in case someone else having the same problem comes accross this thread. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
    Resetting Launch Services
    If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
    Resolving Disk, Permission, and Cache Corruption
    The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
    Side effects of System cache cleaning
    As an example, this is how you should proceed with OnyX:
    1. Quit all applications.
    2. Launch OnyX and enter your administrator password.
    3. Go to Maintenance > Reset and check LaunchServices database.
    4. Un-check any other pre-checked options.
    5. Click the Execute button.
    6. Restart the computer.

  • I cannot send or reply to emails

    I am having problems with my emails in that I now cannot send or reply, help?

    gillian
    is this of sudden onset? Update of iOS perhaps?
    I have seen several of this issue come through and I thought certain it had been answered definitively, but alas, I cannot find the thread I remember via search.
    The one thread that has an official Apple employee participating is since the ios 8.1.2 upgrade my pop email account will not send - there are a couple of links provided for self help and a contact link if no joy.
    Happy Holidays
    ÇÇÇ

  • I use an iPhone 4s and it won't allow me to reply to email messages. How can I fix this?

    For some reason I can't reply to emails on my iphone 4s. I get error messages saying it can't connect to the server. Is it fixable?

    Charter is my supplier and as much as they didn't want to think they could could help they did by telling me that both the incoming & outgoing server addresses had to match. My outgoing server had a few extra characters at the end of it that the incoming didn't and as soon as I deleted those everything worked fine.
    Thanks.

  • How do I set Tbird 31.5 to show options for using italics, boldface, etc. in composing and replying to email? Have been using Tbird for years and can't get it.

    I really have been using Tbird for years and I can't get the options for italics etc to show when composing or replying. I'm an editor looking for job so this is relevant. Please save me from Outlook. Thanks.

    I believe you can specify italics by putting a slash before and after the text, bold is done using asterisks before and after text, and underline is done using the underline character before and after text.

  • Cannot email photos from iPhoto after upgrade to 10.8

    After upgrading to 10.8, I have not been able to successfully eamil photos from iPhoto. I can select the photos, click the email icon, and have Mail open with the photos attached (as expected). But the send button is grayed out, and the newly created message window cannot be closed. To get rid of the unsendable email, I have to quit or force shut down Mail, then reopen Mail and manually delete the email from Drafts.
    Has anyone else run into this issue?

    As Larry suggested go into iPhoto's Accounts preference pane and make sure your email account information is correct. If you joined iCloud that is a must.
    OT

  • Unread email count Is 3900 after upgrade to IOS 8.1.2

    AFter upgrading to IOS 8.1.2 my unread email count jumped to 3900 even though there is no email on my phone and none on the server. Is there a way of clearing this count?

    Hi, jaff067.  
    Thank you for visiting Apple Support Communities. 
    I understand that you have an unread message counter, but your mail account indicates all mail is read.  This usually means that you have an additional mail account setup.  Check to see if you can access this account or change mailboxes and clear the unread via the steps below.   
    Write messages
    Cheers, 
    Jason H.  

  • Messages crashes repeatedly after upgrade to Mavericks

    After upgrading to Mavericks, Messages crashes repeatedly.
    Macbook Pro 17", circa 2011 I think, OS X 10.9.2.
    Immediately after upgrading to Mavericks it would just crash when I scrolled down through my conversation history, but if I just searched for conversations it was generally functional.
    Following some Apple Support Communities advice I renamed several directories, hoping that if I clear out the message history and start from "scratch" I would have better luck. I mv'd all the directories in:
    ~/Library/Containers/com.apple.ichat/Data/Library/Messages
    ~/Library/Messages
    After rebooting my laptop the conversation history cleared out like I had hoped, and as messages started coming in the chat.db, Archive, etc. folders were generated in the above directories like I expected. It was generally functional for a couple hours.
    Now it crashes immediately on open. Here is first bit of the "Problem Details and System Configuration"
    Process:         Messages [4886]
    Path:            /Applications/Messages.app/Contents/MacOS/Messages
    Identifier:      com.apple.iChat
    Version:         8.0 (4226)
    Build Info:      iChat-4226000000000000~3
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [231]
    Responsible:     Messages [4886]
    User ID:         505
    Date/Time:       2014-04-11 08:31:59.572 -0400
    OS Version:      Mac OS X 10.9.2 (13C64)
    Report Version:  11
    Anonymous UUID: 
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_CRASH (SIGABRT)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Application Specific Information:
    [4886] stack overflow
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   libsystem_kernel.dylib                  0x00007fff949cb866 __pthread_kill + 10
    1   libsystem_pthread.dylib                 0x00007fff8a9f235c pthread_kill + 92
    2   libsystem_c.dylib                       0x00007fff8ab5bbba __abort + 145
    3   libsystem_c.dylib                       0x00007fff8ab5c46d __stack_chk_fail + 196
    4   com.apple.ImageIO.framework             0x00007fff88232e10 initImageJPEG + 7028
    5   ???                                     0xffff9fffffd43cdf 0 + 18446638520590417119
    6   ???                                     0x0000058f00000311 0 + 6111738462993
    Any ideas?
    Thanks!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—again, the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Oracle error  "No message file for" after Upgrade to 10.2.0.5

    After upgrade from 9.2.0.8 to 10.2.0.5 i get the following error "No message file for"
    (with both Users sidadm and orasid)
    Platform AIX 64 bit
    The installation und Upgrade with dbua works fine.
    DB and SAP runs after the Upgrade.
    then I tried
    SQL> select xx from v$log;
    select xx from v$log
    ERROR at line 1:
    ORA-00904: Message 904 not found; No message file for produstyle='font-
    family:courier' ct=RDBMS,
    facility=ORA; arguments: ["XX"]
    The Environment is correct,
    ORACLE_HOME,ORACLE_SID,PATH,LIBPATH have right Values.
    I cant find any failure in Configuration or Install Logs.
    So i tried the following:
    Copy the complete Directorie /oracle/SID/102_64/rdbms/msg from a
    10.2.0.4 Oracle Installation to the 10.2.0.5 home.
    the result ist that the Messagefile could be read by Oracle an i get
    the ORA-00904
    Here the same Query:
    SQL> select xx from v$log;
    select xx from v$log
    ERROR at line 1:
    ORA-00904: "XX": invalid identifier
    So I do the same procedure with an other System.
    I detect:
    the Patch 9952230 (SAP_102051_201011/9952230) delivers
    both Message Files oraus.msg and oraus.msb which caused the problem.
    Has anyone the same Problem?
    Are there any other Impacts with wrong Message Files .
    I raised a OSS Call, but no answer till today.
    best regards
    Uwe

    I could not find anything is sap notes, but oracle recommends to update binary file oraus.msb in $ORACLE_HOME/rdbms/mesg
    Download link:
    https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=10235783
    You can find more details also in:
    https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=10235783.8
    https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=10235783
    The problem with this solution. It is not officially released by SAP.

Maybe you are looking for

  • Exctract an URL from an HREF?

    I have some javascript, which pops up a separate browser window. All I need to do is call it with the url. How can I extract an url from a jato href, so I can use it in my javascript call? I can't find anything in the HREF javadoc which indicates how

  • Any way to remove rows in "provisioning" state under accounts tab in OIM

    Hi Experts, Is there anyway to remove the rows under user's accounts tab which are in "provisioning" state. These will no longer be used and somehow these attempts to provision account failed in the past.

  • Workflow Activity with no Incoming Transition

    What does workflow do when it encounters an Activity with no incoming transitions? I have a massive workflow , somewhere in the middle there is a "reProvision" Activity but nothing transitioned TO it. All transitions are out going.

  • Apex query hanging

    Hi, I have a query which runs OK from SQL developer, I move SQL to APEX and it hangs and never returns any records. Any ideas. Thanks, Arik

  • Photo Start where left of

    if I happen to have few hundred photos in few folders and I stopped viewing to do another task and I cam back to continue viewing; why I cannot start where I had left off. Is there a way of doing that or any plans to do it or at least have a bookmark