I cannot connect Mail application

Hello! I just bought  a new MacBookPro and I'm unable to connect my accounts to the Mail application. I don´t know what's wrong as I've done it many times before in other computers I had. It comes the message that the SMTP is not connected in any account. What I'm I doing wrong? Thank you!!

Apple - Support - Mail Setup Assistant

Similar Messages

  • Mail will not stop loading, twirling rainbow icon will not stop, cannot close mail application then.

    Just downloaded OS X Mountain Lion and on my Mac Book Pro (mid 2009).  When I select the mail application this problem occurs: the rainbow icon that twirls will not stop, and then I cannot close the mail program at all.  No clue what to do next, thanks for the help or ideas. SanibelMan 09/09/2012 @ 2am EST.

    Click on the apple in the top left corner of the computer. If it doesn't let you, open another application such as finder, and then click it, then go down the force quit, then click mail and then press force quit.

  • Cannot Connect Mail / Browser But Skype Works??? All 3 work in Parallels!

    Bizarre!! Since when has a Mac worked better in Parallels than in OSX??
    Parallels works connecting to internet and email accounts but all my accounts and info/ bookmarks are in mail/ Safari.
    Skype works on the mac via airport. Nothing else works via airport or LAN. I am in Singapore and traveling all over. It started playing up a few days ago.....Please Help!
    All accounts are POP.
    When checking messages it is the normal message that it cannot connect to the server.

    Since your problem seems to be strictly related to OS X, and not Parallels or anything else similar to the focus of this forum...compatibility issues between Macs and Windows, you should probably post your question in one of the various OS X forums:
    http://discussions.apple.com/category.jspa?categoryID=177

  • Cannot Connect Mail / Safari But Skype Works??? All 3 work in Parallels!

    Bizarre!! Since when has a Mac worked better in Parallels than in OSX??
    Parallels works connecting to internet and email accounts but all my accounts and info/ bookmarks are in mail/ Safari.
    Skype works on the mac via airport. Nothing else works via airport or LAN. I am in Singapore and traveling all over. It started playing up a few days ago.....Please Help!
    All accounts are POP.
    When checking messages it is the normal message that it cannot connect to the server.

    Since your problem seems to be strictly related to OS X, and not Parallels or anything else similar to the focus of this forum...compatibility issues between Macs and Windows, you should probably post your question in one of the various OS X forums:
    http://discussions.apple.com/category.jspa?categoryID=177

  • Cannot install Mail application after downgrade Mac OS X 10.9 to 10.7.5.

    Dear Mac fans, maybe somebody can help me with expirience or advice how to install Mail application on Mac OS X 10.7.5.
    After I made downgrade from Mac OS X 10.9 (Maverick) to 10.7.5. (Lion) Mail application didnt work properly and report some errors.
    During installation of Mac OS X 10.7.5 I use Time Machine and all other program and/or data working properly. Only Mail application not!
    I find some information that Mail application is part of MAC OS X and tht is neccessary to reinstall whole MAC OS X to get mail application.
    Will somebody have procedure or way how to solve this issue?!
    Really thanks in advance,
    Rusmir

    That is correct. You must use OS X Recovery to restore OS X in order to reinstall the Mail app.
    OS X: About OS X Recovery
    There is no standalone download available.

  • SCCM application catalog cannot connect to application server

    Hi all,
    We have SCCM 2012 SP1 deployed. When we try to connect to the Application Catalog we are unable to and get an error that says unable to connect to the application server. The related roles were uninstalled and re-installed, so the configuration is correct.
    We have a C drive and an I drive. The I drive is where all content is stored for when we deploy packages. 
    I am wondering if having the two separate drives is causing the issue or if it could be something else. Any thoughts? Any one else do the same as us? 

    Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
    Having two drives will not cause you any issue. You will need to dig into the log files to see what is going on.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • CANNOT CONNECT WITH APPLICATION HOSTED ON NETWORK

    Hi,
    I created a small application with Oracle 10gXE and hosted it on my PC which serves as the hub of our network in my office. However, I have not been able to access the application from other PCs on the network. What should I do? The application works fine on my PC, with or without internet connection. But we need to be able to access it from any point in out office so we can all use it.

    What is the meaning of this sentence:
    Service Administration is not available. The concept of hosting Oracle APEX service not available in this version of Oracle APEX. To host an Application Express instance for many users across multiple workspaces, the database will need to be upgraded to Oracle Database 10g Enterprise Edition or Standard Edition.
    May be this is the source of this problem? I have looked for XE and APEX for the reason of having an SQL server and an application server for a small workgroup but this line made me indeterminated.
    Source: http://www.oracle.com/technology/products/database/application_express/html/apex_and_xe.html

  • Cannot launch mail application

    Sorry that I am posting this twice - I posted it inadvertantly on the Tiger thread...
    Suddenly I am not able to launch Mail. It is on the dock but the icon has a question mark on top of it. It is no longer in the Applications folder, however, I can't imagine that I deleted it.
    I tried to do a software restore, but it didn't help.
    I am getting quite worried! Suggestions????
    Thanks in advance...

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • SCCM 2012R2 cm application catalog cannot connect to application server

    Good Day,We are attempting to use the Web Portal of SCCM 2012R2 to deliver application installs to users, however we are receiving the above error on the interface.Below is a snippet from the log files located in the ServicePortalWebSite.log:Exception rethrown at [0]:
    at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
    at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
    at IApplicationOfferService.GetApplications(Int32& totalNumberRows, UserContext userContext, ApplicationProperty sortBy, ApplicationFilter[] filterBy, String searchBy, Int32 maximumRows, Int32 startRowIndex, Boolean sortAscending, ApplicationClassicDisplayName classicNameFields, Boolean useSecondarySort, Platforms platformFilter, String reserved)
    at...
    This topic first appeared in the Spiceworks Community

    I have been Racking my brain for a Month now trying to setup a Biscom Faxserver using the BrookTrout SR140 . I have had a AT&T/Shoretel Tier3 engineer work with me twice, the last session was for 4 hours trying to get the outbound part of this faxserver to work. Oddly to to it will receive inbound Faxes successfully. It will not get past the initial "Send a test Fax".
    Previously I was getting a "403 forbidden" error in wireshark and starting yesterday I am getting a "415 unsupported media" error.I have used the the setup documentation @
    http://support.shoretel.com/products/third_party/downloads/dialogic_brooktrout.pdf?__utma=152168315....Any help or some direction to a solution would be greatly appreciated.

  • Cannot connect to mail throughYosemite.. account preferences cannot connect

    I download Yosemite,now the mail doesn"t work when I click on the icon. I go to accounts and they pop up but when I try to connect it says account preference
    cannot connect. mail works through verizon,aol but not from the computer.....it use to but not now

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Apple Mail Application Problems - Cannot connect to Server

    Hello Apple Community.
    For the past two days my Mail application on my iPad and MacBook do not. It is as if there is a problem with the internet but my internet it working fine. The app opens and loads and continues to load but then says it Cannot Connect to Server.
    Is there any way to fix this problem. I do not have OSX Mavericks.
    Please help.
    Thanks

    If the problem exists on two different devices (different operating systems), your router or ISP is probably the reason. Contact your ISP for help.
    Barry

  • Cannot Connect to Google Calendar in Mail, Contacts & Calendars preferences

    I recently obtained a new Mac and am playing with Mountain Lion for the first time. I'm trying to add my Google Apps (custom domain, not @gmail.com) account to the Mail, Contacts & Calendars control panel. I was able to add Mail, Messages, and Notes without any issues, but it's refusing to connect to Calendars & Reminders. When I attempting connecting, it gives me an error...
    A secure connection couldn't be established.
    Click “Continue” to continue creating the account. You can edit the account later in Calendar preferences if necessary.
    So I click "Continue" to... well, continue. Eventually, I've given this error:
    There was a problem setting up the account.
    Calendar couldn't discover the account settings for the CalDAV server “google.com”.
    Just out of curiousity, I went into the Calendar app to directly add my Google account. Doing so also gives me an error:
    Server with Secure Communication Unavailable
    Your calendar account isn't on a server that can receive your calendar securely.
    If a server isn't secure, others may be able to view your calendar information. To continue searching for your account on servers that may not be secure, and then set up the account if it's found, click Continue.
    So I go ahead and click Continue. After waiting some more, I finally get the error...
    No CalDAV servers were found for "google.com".
    This message appears on the Account Settings sheet where you can add a CalDAV account. If I manually type in the Server Address here (https://www.google.com/calendar/dav/[email protected]/user//www.google.com/calendar/dav/[email protected]/user), Calendar claims it still cannot connect to a secure connection. This time, clicking Continue does add the account. (I'm assuming through a non-secure conncetion.) If I try to edit the Account Settings, it takes me to the Mail, Contacts, and Calendars control panel where Calendars & Reminders for my Google account is now selected.
    I can only assume this is a weird bug with Mountain Lion, but needless to say, this is far from the "it just works" mentality I've been use to.
    This was not an issue with iCal on Snow Leopard, which is what I'm coming from.

    I was having similar issues and thought I would put down what solved my problem.
    In "Mail, Contacts & Calendars" I didn't choose "Gmail" I used "Add Oter Account…" as previously mentiond.
    Then I chose "Add a CalDav account"
    Under User Name: I entered my entire gmail address
    Under Password: I entered a new "Application Password" key as generated by Googles two step verification process.
    Under Server Address: I tried to use just "google.com" and "www.google.com" neither of these worked - only errors. So I used the address as listed on Google Calender when clicking on settings for my main calendar. There is a link that will give you your calendars private address. I shortened it to:
    www.google.com/calendar/ical/your_gmail_address_goes_here
    Then it worked immediately!

  • TS3899 I am unable to get mail, I am getting an error message that says cannot get mail, the connection to the server failed.

    I am unable to send or receive mail.  I am getting an error message that says, cannot get mail, the connection to the server failed

    Hotmail IS having problems:
    http://bostinno.streetwise.co/2013/08/15/hotmail-outage-hotmail-is-down-for-user s-still-photos/
    http://www.engadget.com/2013/08/14/outlook-outage/
    http://www.infoworld.com/d/applications/microsofts-skydrive-outlookcom-are-down- some-users-224940
    http://mashable.com/2013/08/14/outlook-down/
    http://techcrunch.com/2013/08/14/microsoft-acknowledges-outlook-com-messenger-sk ydrive-outages/

  • Cannot now open the mail application - any clues as to how i can fix this ?

    Just downloaded Yosemite and cannot now open the mail application - how can i get this back ?
    thanks

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • My computer/Mail program cannot connect to my business mail server.

    Suddenly my mailboxes time out from all computers at my house to my mail server.  Also, browsers cannot connect to the server to see my website, and I cannot connect directly to my webmail application to bypass Mail.  Nothing has changed, but suddenly we are cutoff from our server.  I have tried restarting my Airport Extreme, flushing the DNS cache on the computer and screaming at my network admin guy.  Nothing is working.  My webmaster has no trouble reaching the website or the webmail portal.  Only seems to be happening here at this location.  Any ideas??

    Have you tried restarting/resetting the router?

Maybe you are looking for

  • Regular Expressions with Java Regex

    Hi, I'm playing around with regex and there's something I can't get to work. What I need, is to capture words between 2 other words and the words captured has to be higher than 5 characters, so for example: Pattern "Just testing on something with reg

  • Text top up

    I usually text 2525 to top up my phone. Today I sent the usual code and I didnt get any text back saying it had been accepted. I thought it could be my reception but I've been sending and receiving texts all day without any bother. Does anyone know w

  • Cant transfer to sony ebook

    Hi, I installed editions and successfully downloaded a book from waterstones. Connected Sony Ebook reader to my Mac and it shows up as an additional drive. If I drag the .epub book across it successfully shows up in the ebook menu. But when I try to

  • Error message-DPMSSet: Invalid arugumanet

    I keep getting an error log that fills up with the error meassage DPMSSet: Invalid argument Power Management Problems I have been unable to figure it out. Does anyone know what this is about?

  • Nokia 6151 - i cant move contact to phone memory..

    does anyone know why i can't move all my contacts to phone memory..the phone shows this message "phone memory protected".. please help me.. do i need to do any setting ? thanks a lot